aboutsummaryrefslogtreecommitdiffstats
path: root/mm/sparse.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-06sh: fix uninitialized spinlockAkinobu Mita1-1/+1
The spinlock in traps_64.c is used without initialization. This fixes it by declaring DEFINE_SPINLOCK() and makes the spinlock static variable. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06sh: intc: Fix build with IRQ balancing disabled.Paul Mundt1-4/+5
The balancing stubs obviously need to be static inline.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06sh: intc: Add missing files.Paul Mundt2-0/+40
The Kconfig and Makefile were overlooked, add those in now to improve odds of building. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: Wire up INTC subgroup splitting for SH7786 SCIF1.Paul Mundt1-38/+72
SH7786 is the big user for subgroup splitting, mostly for the PCIe block, but those will follow later. For now we simply split up SCIF1, as used by the serial console on SDK7786 and others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Split up the INTC code.Paul Mundt14-1809/+2052
This splits up the sh intc core in to something more vaguely resembling a subsystem. Most of the functionality was alread fairly well compartmentalized, and there were only a handful of interdependencies that needed to be resolved in the process. This also serves as future-proofing for the genirq and sparseirq rework, which will make some of the split out functionality wholly generic, allowing things to be killed off in place with minimal migration pain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Handle early lookups of subgroup IRQs.Paul Mundt2-11/+25
If lookups happen while the radix node still points to a subgroup mapping, an IRQ hasn't yet been made available for the specified id, so error out accordingly. Once the slot is replaced with an IRQ mapping and the tag is discarded, lookup can commence as normal. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Support virtual mappings for IRQ subgroups.Paul Mundt3-67/+351
Many interrupts that share a single mask source but are on different hardware vectors will have an associated register tied to an INTEVT that denotes the precise cause for the interrupt exception being triggered. This introduces the concept of IRQ subgroups in the intc core, where a virtual IRQ map is constructed for each of the pre-defined cause bits, and a higher level chained handler takes control of the parent INTEVT. This enables CPUs with heavily muxed IRQ vectors (especially across disjoint blocks) to break things out in to a series of managed chained handlers while being able to dynamically lookup and adopt the IRQs created for them. This is largely an opt-in interface, requiring CPUs to manually submit IRQs for subgroup splitting, in addition to providing identifiers in their enum maps that can be used for lazy lookup via the radix tree. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Implement reverse mapping for IRQs to per-controller IDs.Paul Mundt3-1/+100
This implements a scheme roughly analogous to the PowerPC virtual to hardware IRQ mapping, which we use for IRQ to per-controller ID mapping. This makes it possible for drivers to use the IDs directly for lookup instead of hardcoding the vector. The main motivation for this work is as a building block for dynamically allocating virtual IRQs for demuxing INTC events sharing a single INTEVT in addition to a common masking source. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: pfc: Fix up BUG() triggered by gpiolib debugfs lookups.Paul Mundt1-4/+2
The gpiolib debugfs entry takes a hammer approach and iterates over all of the potential GPIOs, regardless of their type. The SH PFC code on the other hand contains a variable mismash of input/output/function types spread out sparsely, leading to situations where the debug code can trigger an out of range enum for the type. Since we already have an error path for out of range enums, we can just hand that up to the higher level instead of the current BUG() behaviour. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: Drop __initdata for SH-X3 pinmux tables.Paul Mundt1-5/+5
The gpio sysfs support needs to get at these later, so drop the __initdata annotations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: pfc: support pinmux deregistration.Paul Mundt2-1/+11
Presently the pinmux code is a one-way thing, but there's nothing preventing an unregistration if no one has grabbed any of the pins. This will permit us to save a bit of memory on systems that require pin demux for certain peripherals in the case where registration of those peripherals fails, or they are otherwise not attached to the system. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: mach-x3proto: Improve ILSEL debugging.Paul Mundt1-4/+12
At the moment ILSEL blows up with a BUG when aliased sets are handed in, but as the enable call is able to hand back errors we opt for that path instead. None of the ILSEL peripherals are vital to the board's operation, so trapping a BUG is a bit excessive. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: mach-x3proto: gpio-keys support.Paul Mundt1-2/+105
This adds gpio-keys mappings for the button matrix on the baseboard, now that we have support for the pin controller. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: mach-x3proto: Support for baseboard GPIOs.Paul Mundt3-0/+149
This adds trivial support for the GPIOs implemented through the baseboard CPLD, used for driving the button matrix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: mach-x3proto: Move the ilsel header to a better place.Paul Mundt3-2/+2
We'll be adding more headers for this board, so move this over to its own directory. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-03sh: Allow GPIO chips to register IRQ mappings.Paul Mundt1-4/+2
As non-PFC chips are added that may support IRQs, pass through to the generic helper instead of triggering the WARN_ON(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support early IRQ vector map reservation for delayed controllers.Paul Mundt4-9/+29
Some controllers will need to be initialized lazily due to pinmux constraints, while others may simply have no need to be brought online if there are no backing devices for them attached. In this case it's still necessary to be able to reserve their hardware vector map before dynamic IRQs get a hold of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Handle pinmux for SH-X3 proto IRQ/IRL modes.Paul Mundt2-0/+25
The SH-X3 proto CPU has all of the external IRQ and IRL pins muxed, make sure that we're able to grab them before attempting to register their respective IRQ controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: pinmux support for SH-X3 proto CPUs.Paul Mundt3-0/+652
This adds in support for GPIO/pinmux on the SH-X3 proto CPUs. This will subsequently be used by the x3proto board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support IRQ balancing for SH-X3 proto cores, too.Paul Mundt2-5/+12
This adds in hardware IRQ auto-distribution support for SH-X3 proto CPUs, following the SH7786 support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support userimask for all SH-X3 interrupt controllers.Paul Mundt3-18/+36
This shuffles some of the shared bits out of the 7786 code and in to a shared SH-X3 support file. Presently just for userimask, but also a good place for the IRQ balancing wrappers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-01sh: Update SH-X3 subtype for clkdev lookups.Paul Mundt3-85/+146
Rewrite the SH-X3 proto CPU clock framework for clkdev. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30sh: boot kernel with SR.BL setMagnus Damm3-2/+7
Update the SH kernel to keep SR.BL set until the VBR register has been initialized. Useful to allow boot of the kernel even though exceptions are pending. Without this patch there is a window of time when exceptions such as NMI are enabled but no exception handlers are installed. This patch modifies both the zImage loader and the actual kernel to boot with BL=1, but the zImage loader is modfied in such a way that the init_sr value is unchanged to not break the zImage loader provided by kexec. Tested on sh7724 Ecovec and on the SH4AL-DSP core included in sh7372. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30sh: fix a kfree address in clkdev codeGuennadi Liakhovetski1-1/+3
kfree() in clkdev_drop() function should actually be called with an address of a struct clk_lookup_alloc object, and not struct clk_lookup, as presently done. This just happens to work, because "struct clk_lookup cl" is the first member in struct clk_lookup_alloc. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-24sh: provide generic arch_debugfs_dir.Paul Mundt8-40/+24
While sh previously had its own debugfs root, there now exists a common arch_debugfs_dir prototype, so we switch everything over to that. Presumably once more architectures start making use of this we'll be able to just kill off the stub kdebugfs wrapper. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-23sh: change to new flag variablematt mooney4-4/+4
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Use a generic raw spinlock for PCI config access locking.Paul Mundt4-12/+17
This copies the pci_config_lock idea from x86 over, allowing us to kill off a couple of existing private locks. At the same time, these need to be converted to raw spinlocks for -rt kernels, so we make that change at the same time. This should make it easier for future parts to get the locking right instead of inevitable ending up with lock type mismatches. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: clock framework support for SH7786 PCIe.Paul Mundt1-21/+86
This gets each port handling its MSTP bit, as well as moving the PHY clock management in to the clock framework. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Use I/O accessors consistently in SH7786 PCIe init code.Paul Mundt2-17/+25
Some of the existing code is flipping between __raw_xxx() and pci_{read,write}_reg(). As the latter are just wrappers for the former, flip over to using them consistently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Support ports with disabled links on SH7786 PCIe.Paul Mundt1-5/+12
Presently we error out if a link is disabled and simply drop the port registration outright. This follows the PPC changes and simply reports on the link state on boot, leaving the port registered, in order to more easily deal with hotplug on future parts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Discard initial PCICONF4/5 settings for SH7786 PCIe.Paul Mundt1-3/+0
These settings are properly propagated by the hardware already, so there's no need to bother with them manually. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Support root complex config accesses on SH7786 PCIe.Paul Mundt2-9/+55
The SH7786 PCIe is presently unable to enumerate itself in root complex mode, and has no visibility through either type 0 or type 1 accesses, despite having a mostly sensible extended config space for each port. Attempts to generate type 0 or type 1 config cycles result in completer aborts, so we're ultimately forced to use SuperHyway transactions instead. As each port has a single port <-> device mapping that resolves for any PCI_SLOT definition, we simply hijack devfn 0 for the SuperHyway transaction and bump up the devfn limit. With enumeration of the root complex now possible, we also need to insert an early fixup to hide the BARs from the kernel. With all of that done, it's now possible to use the pcieport services with all of the PCIe ports, which is the first step to power management support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Move Renesas PCI IDs to a better place.Paul Mundt2-6/+7
Previously these IDs were only used by one driver, so there was not much need for having them generically defined. Now that this will no longer hold true, move them over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19sh: pci: Give SH7786 PHY some time to settle.Paul Mundt1-0/+3
The spec suggests waiting up to 500ms for the PHY to settle before testing link state, but practice shows that 100ms is sufficient (this is the delay value we also use on the other SH-4A PCI controllers, too). This makes device detection much more reliable, although in the future it should be a bit faster to simply serialize with a TLP IRQ. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19sh: pci: Toggle configuration accesses on SH7786.Paul Mundt1-0/+3
After configuration accesses have been completed deassert the configuration access enable cleanly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19sh: pci: Use generic pci_enable_resources() for pcibios_enable_device().Paul Mundt1-34/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16usb: Fix up r8a66597-hcd section mismatches.Paul Mundt1-2/+2
The _remove() routine is flagged __init_or_module, despite only being used in a __devexit context. As the rest of the driver is already balanced out with __devinit, switch to __devexit and __devexit_p() wrapping. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16mfd: Fix up section mismatches in SH SDHI.Paul Mundt1-1/+1
The current probe/remove definitions are split between __init and __devexit, make them consistent by switching to __devinit. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16sh: kill big kernel lockArnd Bergmann1-6/+3
The only BKL user in arch/sh protects a single bit, so we can trivially replace it with test_and_set_bit. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14Revert "sh: ecovec24: modify tsc2007 platform settings"Paul Mundt1-2/+24
According to Morimoto-san, this is no longer needed. Revert it. This reverts commit e0009b0a44f28227571d8cddebc5ccdae86027a6. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: Provide a non-multiplexed sys_recvmmsg path.Paul Mundt2-20/+20
Now that the rest of the socket calls are provided through their own paths, do the same for sys_recvmmsg. It's unlikely we'll ever be able to kill off the socketcall path, but this at least permits userspace to gradually begin migrating. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: Add syscall entries for non multiplexed socket callsCarmelo AMOROSO2-1/+38
Linux kernel already has socket syscalls that can be invoked without the multiplexing sys_socketcall wrapper. C library wrappers are ready to use them directly. It needs just to define the missing syscall numbers and provide the related entries into the syscalls table, like sh64 aleady does. Signed-off-by: Francesco Rundo <francesco.rundo@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: ecovec24: modify tsc2007 platform settingsKuninori Morimoto1-24/+2
This patch modify x_plate_ohms to correct value for tsc2007 panel, and removed un-necessary ts_get_pendown_state() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: Set CONFIG_SYSFS_DEPRECATED_V2=nMatt Fleming38-38/+0
As the help for the config option suggests, this option really shouldn't be set by default for any recent distribution as it changes the layout of sysfs. I spotted this while running debian when udev got very confused by the sysfs layout and failed to create some device nodes. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Hook up 3rd memory window for all SH7786 PCIe channels.Paul Mundt1-0/+3
Now that the resource assignment issues are resolved, we can finally wire up the small third memory window -- in the future we may reclaim this for MSI. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Properly wire up channel 2's I/O window on SH7786 PCIe.Paul Mundt1-0/+1
An IORESOURCE_IO was missing here, which meant that we weren't properly establishing the I/O window for this particular slot. With this corrected, cards with I/O BARs have them actually assigned and accessible. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Ignore 32-bit windows in 29-bit mode for SH7786 PCIe.Paul Mundt1-8/+16
Certain memory windows are only available for 32-bit space, so skip over these in 29-bit mode. This will severely restrict the amount of memory that can be mapped, but since a boot loader bug makes booting in 29-bit mode close to impossible anyways, everything is ok. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Establish a SuperHyway<->PCIe window mapping on SH7786 PCIe.Paul Mundt1-1/+1
This bumps up the low address to match the physical memory windows for SHway<->PCIe transfers. The previous implementation was banking on a 1:1 virt<->phys SHway mapping, which doesn't apply here. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Make SH7786 PCIe port reset logic more aggressive.Paul Mundt1-1/+11
This attempts a more complete port reset, building on top of the existing approach. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Additional register definitions for SH7786 PCIe.Matt Fleming1-2/+54
Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.