aboutsummaryrefslogtreecommitdiffstats
path: root/mm/truncate.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-12-18xen-netback: don't use last request to determine minimum Tx creditDavid Vrabel1-3/+1
The last from guest transmitted request gives no indication about the minimum amount of credit that the guest might need to send a packet since the last packet might have been a small one. Instead allow for the worst case 128 KiB packet. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen: Add RING_COPY_REQUEST()David Vrabel1-0/+14
Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly (i.e., by not considering that the other end may alter the data in the shared ring while it is being inspected). Safe usage of a request generally requires taking a local copy. Provide a RING_COPY_REQUEST() macro to use instead of RING_GET_REQUEST() and an open-coded memcpy(). This takes care of ensuring that the copy is done correctly regardless of any possible compiler optimizations. Use a volatile source to prevent the compiler from reordering or omitting the copy. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-14xen/x86/pvh: Use HVM's flush_tlb_others opBoris Ostrovsky1-7/+2
Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-02xen: Resume PMU from non-atomic contextBoris Ostrovsky1-10/+10
Resuming PMU currently triggers a warning from ___might_sleep() (assuming CONFIG_DEBUG_ATOMIC_SLEEP is set) when xen_pmu_init() allocates GFP_KERNEL page because we are in state resembling atomic context. Move resuming PMU to xen_arch_resume() which is called in regular context. For symmetry move suspending PMU to xen_arch_suspend() as well. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> # 4.3 Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-02xen/events/fifo: Consume unprocessed events when a CPU diesRoss Lagerwall1-5/+18
When a CPU is offlined, there may be unprocessed events on a port for that CPU. If the port is subsequently reused on a different CPU, it could be in an unexpected state with the link bit set, resulting in interrupts being missed. Fix this by consuming any unprocessed events for a particular CPU when that CPU dies. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-26xen/evtchn: dynamically grow pending event channel ringDavid Vrabel1-16/+107
If more than 1024 event channels are bound to a evtchn device then it possible (even with well behaved applications) for the ring to overflow and events to be lost (reported as an -EFBIG error). Dynamically increase the size of the ring so there is always enough space for all bound events. Well behaved applicables that only unmask events after draining them from the ring can thus no longer lose events. However, an application could unmask an event before draining it, allowing multiple entries per port to accumulate in the ring, and a overflow could still occur. So the overflow detection and reporting is retained. The ring size is initially only 64 entries so the common use case of an application only binding a few events will use less memory than before. The ring size may grow to 512 KiB (enough for all 2^17 possible channels). This order 7 kmalloc() may fail due to memory fragmentation, so we fall back to trying vmalloc(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
2015-11-26xen/events: Always allocate legacy interrupts on PV guestsBoris Ostrovsky3-2/+13
After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-26xen/gntdev: Grant maps should not be subject to NUMA balancingBoris Ostrovsky1-1/+1
Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-02xen: fix the check of e_pfn in xen_find_pfn_rangeZhenzhong Duan1-1/+1
On some NUMA system, after dom0 up, we see below warning even if there are enough pfn ranges that could be used for remapping: "Unable to find available pfn range, not remapping identity pages" Fix it to avoid getting a memory region of zero size in xen_find_pfn_range. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-28x86/xen: add reschedule point when mapping foreign GFNsDavid Vrabel1-0/+1
Mapping a large range of foreign GFNs can take a long time, add a reschedule point after each batch of 16 GFNs. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-10-23xen/arm: don't try to re-register vcpu_info on cpu_hotplug.Stefano Stabellini1-0/+12
Call disable_percpu_irq on CPU_DYING and enable_percpu_irq when the cpu is coming up. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com>
2015-10-23xen, cpu_hotplug: call device_offline instead of cpu_downStefano Stabellini1-1/+5
When offlining a cpu, instead of cpu_down, call device_offline, which also takes care of updating the cpu.dev.offline field. This keeps the sysfs file /sys/devices/system/cpu/cpuN/online, up to date. Also move the call to disable_hotplug_cpu, because it makes more sense to have it there. We don't call device_online at cpu-hotplug time, because that would immediately take the cpu online, while we want to retain the current behaviour: the user needs to explicitly enable the cpu after it has been hotplugged. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: david.vrabel@citrix.com
2015-10-23xen/arm: Enable cpu_hotplug.cStefano Stabellini5-4/+36
Build cpu_hotplug for ARM and ARM64 guests. Rename arch_(un)register_cpu to xen_(un)register_cpu and provide an empty implementation on ARM and ARM64. On x86 just call arch_(un)register_cpu as we are already doing. Initialize cpu_hotplug on ARM. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-10-23xenbus: Support multiple grants ring with 64KBJulien Grall1-25/+72
The PV ring may use multiple grants and expect them to be mapped contiguously in the virtual memory. Although, the current code is relying on a Linux page will be mapped to a single grant. On build where Linux is using a different page size than the grant (i.e other than 4KB), the grant will always be mapped on the first 4KB of each Linux page which make the final ring not contiguous in the memory. This can be fixed by mapping multiple grant in a same Linux page. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant-table: Add an helper to iterate over a specific number of grantsJulien Grall2-0/+28
With the 64KB page granularity support on ARM64, a Linux page may be split accross multiple grant. Currently we have the helper gnttab_foreach_grant_in_grant to break a Linux page based on an offset and a len, but it doesn't fit when we only have a number of grants in hand. Introduce a new helper which take an array of Linux page and a number of grant and will figure out the address of each grant. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/xenbus: Rename *RING_PAGE* to *RING_GRANT*Julien Grall5-29/+29
Linux may use a different page size than the size of grant. So make clear that the order is actually in number of grant. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/arm: correct comment in enlighten.cJuergen Gross1-1/+1
Correct a comment in arch/arm/xen/enlighten.c referencing a wrong source file. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/gntdev: use types from linux/types.h in userspace headersMikko Rapeli1-16/+18
__u32, __u64 etc. are preferred for userspace API headers. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/gntalloc: use types from linux/types.h in userspace headersMikko Rapeli1-10/+12
__u32, __u64 etc. are preferred for userspace API headers. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/balloon: Use the correct sizeof when declaring frame_listJulien Grall1-1/+1
The type of the item in frame_list is xen_pfn_t which is not an unsigned long on ARM but an uint64_t. With the current computation, the size of frame_list will be 2 * PAGE_SIZE rather than PAGE_SIZE. I bet it's just mistake when the type has been switched from "unsigned long" to "xen_pfn_t" in commit 965c0aaafe3e75d4e65cd4ec862915869bde3abd "xen: balloon: use correct type for frame_list". Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/swiotlb: Add support for 64KB page granularityJulien Grall3-40/+63
Swiotlb is used on ARM64 to support DMA on platform where devices are not protected by an SMMU. Furthermore it's only enabled for DOM0. While Xen is always using 4KB page granularity in the stage-2 page table, Linux ARM64 may either use 4KB or 64KB. This means that a Linux page can be spanned accross multiple Xen page. The Swiotlb code has to validate that the buffer used for DMA is physically contiguous in the memory. As a Linux page can't be shared between local memory and foreign page by design (the balloon code always removing entirely a Linux page), the changes in the code are very minimal because we only need to check the first Xen PFN. Note that it may be possible to optimize the function check_page_physically_contiguous to avoid looping over every Xen PFN for local memory. Although I will let this optimization for a follow-up. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlbJulien Grall4-8/+11
With 64KB page granularity support, the frame number will be different. It will be easier to modify the behavior in a single place rather than in each caller. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23arm/xen: Add support for 64KB page granularityJulien Grall2-5/+16
The hypercall interface is always using 4KB page granularity. This is requiring to use xen page definition macro when we deal with hypercall. Note that pfn_to_gfn is working with a Xen pfn (i.e 4KB). We may want to rename pfn_gfn to make this explicit. We also allocate a 64KB page for the shared page even though only the first 4KB is used. I don't think this is really important for now as it helps to have the pointer 4KB aligned (XENMEM_add_to_physmap is taking a Xen PFN). Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/privcmd: Add support for Linux 64KB page granularityJulien Grall2-43/+89
The hypercall interface (as well as the toolstack) is always using 4KB page granularity. When the toolstack is asking for mapping a series of guest PFN in a batch, it expects to have the page map contiguously in its virtual memory. When Linux is using 64KB page granularity, the privcmd driver will have to map multiple Xen PFN in a single Linux page. Note that this solution works on page granularity which is a multiple of 4KB. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23net/xen-netback: Make it running on 64KB page granularityJulien Grall2-62/+111
The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity working as a network backend on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23net/xen-netfront: Make it running on 64KB page granularityJulien Grall1-36/+86
The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using network device on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Note that we allocate a Linux page for each rx skb but only the first 4KB is used. We may improve the memory usage by extending the size of the rx skb. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23block/xen-blkback: Make it running on 64KB page granularityJulien Grall3-9/+22
The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity behaving as a block backend on a non-modified Xen. It's only necessary to adapt the ring size and the number of request per indirect frames. The rest of the code is relying on the grant table code. Note that the grant table code is allocating a Linux page per grant which will result to waste 6OKB for every grant when Linux is using 64KB page granularity. This could be improved by sharing the page between multiple grants. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: "Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23block/xen-blkfront: Make it running on 64KB page granularityJulien Grall1-111/+213
The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using block device on a non-modified Xen. The block API is using segment which should at least be the size of a Linux page. Therefore, the driver will have to break the page in chunk of 4K before giving the page to the backend. When breaking a 64KB segment in 4KB chunks, it is possible that some chunks are empty. As the PV protocol always require to have data in the chunk, we have to count the number of Xen page which will be in use and avoid sending empty chunks. Note that, a pre-defined number of grants are reserved before preparing the request. This pre-defined number is based on the number and the maximum size of the segments. If each segment contains a very small amount of data, the driver may reserve too many grants (16 grants is reserved per segment with 64KB page granularity). Furthermore, in the case of persistent grants we allocate one Linux page per grant although only the first 4KB of the page will be effectively in use. This could be improved by sharing the page with multiple grants. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant-table: Make it running on 64KB granularityJulien Grall2-6/+6
The Xen interface is using 4KB page granularity. This means that each grant is 4KB. The current implementation allocates a Linux page per grant. On Linux using 64KB page granularity, only the first 4KB of the page will be used. We could decrease the memory wasted by sharing the page with multiple grant. It will require some care with the {Set,Clear}ForeignPage macro. Note that no changes has been made in the x86 code because both Linux and Xen will only use 4KB page granularity. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/events: fifo: Make it running on 64KB granularityJulien Grall2-2/+2
Only use the first 4KB of the page to store the events channel info. It means that we will waste 60KB every time we allocate page for: * control block: a page is allocating per CPU * event array: a page is allocating everytime we need to expand it I think we can reduce the memory waste for the 2 areas by: * control block: sharing between multiple vCPUs. Although it will require some bookkeeping in order to not free the page when the CPU goes offline and the other CPUs sharing the page still there * event array: always extend the array event by 64K (i.e 16 4K chunk). That would require more care when we fail to expand the event channel. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/balloon: Don't rely on the page granularity is the same for Xen and LinuxJulien Grall1-15/+55
For ARM64 guests, Linux is able to support either 64K or 4K page granularity. Although, the hypercall interface is always based on 4K page granularity. With 64K page granularity, a single page will be spread over multiple Xen frame. To avoid splitting the page into 4K frame, take advantage of the extent_order field to directly allocate/free chunk of the Linux page size. Note that PVMMU is only used for PV guest (which is x86) and the page granularity is always 4KB. Some BUILD_BUG_ON has been added to ensure that because the code has not been modified. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23tty/hvc: xen: Use xen page definitionJulien Grall1-2/+2
The console ring is always based on the page granularity of Xen. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/xenbus: Use Xen page definitionJulien Grall2-4/+5
All the ring (xenstore, and PV rings) are always based on the page granularity of Xen. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/biomerge: Don't allow biovec's to be merged when Linux is not using 4KB pagesJulien Grall1-0/+8
On ARM all dma-capable devices on a same platform may not be protected by an IOMMU. The DMA requests have to use the BFN (i.e MFN on ARM) in order to use correctly the device. While the DOM0 memory is allocated in a 1:1 fashion (PFN == MFN), grant mapping will screw this contiguous mapping. When Linux is using 64KB page granularitary, the page may be split accross multiple non-contiguous MFN (Xen is using 4KB page granularity). Therefore a DMA request will likely fail. Checking that a 64KB page is using contiguous MFN is tedious. For now, always says that biovec are not mergeable. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23block/xen-blkfront: split get_grant in 2Julien Grall1-29/+59
Prepare the code to support 64KB page granularity. The first implementation will use a full Linux page per indirect and persistent grant. When non-persistent grant is used, each page of a bio request may be split in multiple grant. Furthermore, the field page of the grant structure is only used to copy data from persistent grant or indirect grant. Avoid to set it for other use case as it will have no meaning given the page will be split in multiple grant. Provide 2 functions, to setup indirect grant, the other for bio page. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23block/xen-blkfront: Store a page rather a pfn in the grant structureJulien Grall1-20/+19
All the usage of the field pfn are done using the same idiom: pfn_to_page(grant->pfn) This will return always the same page. Store directly the page in the grant to clean up the code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23block/xen-blkfront: Split blkif_queue_request in 2Julien Grall1-124/+153
Currently, blkif_queue_request has 2 distinct execution path: - Send a discard request - Send a read/write request The function is also allocating grants to use for generating the request. Although, this is only used for read/write request. Rather than having a function with 2 distinct execution path, separate the function in 2. This will also remove one level of tabulation. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant: Add helper gnttab_page_grant_foreign_access_ref_oneJulien Grall1-0/+9
Many PV drivers contain the idiom: pfn = page_to_gfn(...) /* Or similar */ gnttab_grant_foreign_access_ref Replace it by a new helper. Note that when Linux is using a different page granularity than Xen, the helper only gives access to the first 4KB grant. This is useful where drivers are allocating a full Linux page for each grant. Also include xen/interface/grant_table.h rather than xen/grant_table.h in asm/page.h for x86 to fix a compilation issue [1]. Only the former is useful in order to get the structure definition. [1] Interdependency between asm/page.h and xen/grant_table.h which result to page_mfn not being defined when necessary. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant: Introduce helpers to split a page into grantJulien Grall3-1/+69
Currently, a grant is always based on the Xen page granularity (i.e 4KB). When Linux is using a different page granularity, a single page will be split between multiple grants. The new helpers will be in charge of splitting the Linux page into grants and call a function given by the caller on each grant. Also provide an helper to count the number of grants within a given contiguous region. Note that the x86/include/asm/xen/page.h is now including xen/interface/grant_table.h rather than xen/grant_table.h. It's necessary because xen/grant_table.h depends on asm/xen/page.h and will break the compilation. Furthermore, only definition in interface/grant_table.h is required. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen: Add Xen specific page definitionJulien Grall1-1/+26
The Xen hypercall interface is always using 4K page granularity on ARM and x86 architecture. With the incoming support of 64K page granularity for ARM64 guest, it won't be possible to re-use the Linux page definition in Xen drivers. Introduce Xen page definition helpers based on the Linux page definition. They have exactly the same name but prefixed with XEN_/xen_ prefix. Also modify xen_page_to_gfn to use new Xen page definition. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23arm/xen: Drop pte_mfn and mfn_pteJulien Grall1-3/+0
They are not used in common code expect in one place in balloon.c which is only compiled when Linux is using PV MMU. It's not the case on ARM. Rather than worrying how to handle the 64KB case, drop them. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23net/xen-netback: xenvif_gop_frag_copy: move GSO check out of the loopJulien Grall1-7/+7
The skb doesn't change within the function. Therefore it's only necessary to check if we need GSO once at the beginning. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/balloon: pre-allocate p2m entries for ballooned pagesDavid Vrabel1-0/+5
Pages returned by alloc_xenballooned_pages() will be used for grant mapping which will call set_phys_to_machine() (in PV guests). Ballooned pages are set as INVALID_P2M_ENTRY in the p2m and thus may be using the (shared) missing tables and a subsequent set_phys_to_machine() will need to allocate new tables. Since the grant mapping may be done from a context that cannot sleep, the p2m entries must already be allocated. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23x86/xen: export xen_alloc_p2m_entry()David Vrabel2-6/+15
Rename alloc_p2m() to xen_alloc_p2m_entry() and export it. This is useful for ensuring that a p2m entry is allocated (i.e., not a shared missing or identity entry) so that subsequent set_phys_to_machine() calls will require no further allocations. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Make xen_alloc_p2m_entry() a nop on auto-xlate guests.
2015-10-23xen/balloon: use hotplugged pages for foreign mappings etc.David Vrabel2-10/+81
alloc_xenballooned_pages() is used to get ballooned pages to back foreign mappings etc. Instead of having to balloon out real pages, use (if supported) hotplugged memory. This makes more memory available to the guest and reduces fragmentation in the p2m. This is only enabled if the xen.balloon.hotplug_unpopulated sysctl is set to 1. This sysctl defaults to 0 in case the udev rules to automatically online hotplugged memory do not exist. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Add xen.balloon.hotplug_unpopulated sysctl to enable use of hotplug for unpopulated pages.
2015-10-23xen/balloon: make alloc_xenballoon_pages() always allocate low pagesDavid Vrabel6-20/+13
All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23xen/balloon: only hotplug additional memory if requiredDavid Vrabel1-4/+19
Now that we track the total number of pages (included hotplugged regions), it is easy to determine if more memory needs to be hotplugged. Add a new BP_WAIT state to signal that the balloon process needs to wait until kicked by the memory add notifier (when the new section is onlined by userspace). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Return BP_WAIT if enough sections are already hotplugged. v2: - New BP_WAIT status after adding new memory sections.
2015-10-23xen/balloon: rationalize memory hotplug statsDavid Vrabel2-67/+13
The stats used for memory hotplug make no sense and are fiddled with in odd ways. Remove them and introduce total_pages to track the total number of pages (both populated and unpopulated) including those within hotplugged regions (note that this includes not yet onlined pages). This will be used in a subsequent commit (xen/balloon: only hotplug additional memory if required) when deciding whether additional memory needs to be hotplugged. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23xen/balloon: find non-conflicting regions to place hotplugged memoryDavid Vrabel1-20/+53
Instead of placing hotplugged memory at the end of RAM (which may conflict with PCI devices or reserved regions) use allocate_resource() to get a new, suitably aligned resource that does not conflict. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Remove stale comment.
2015-10-23x86/xen: discard RAM regions above the maximum reservationDavid Vrabel1-2/+5
During setup, discard RAM regions that are above the maximum reservation (instead of marking them as E820_UNUSABLE). This allows hotplug memory to be placed at these addresses. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.