aboutsummaryrefslogtreecommitdiffstats
path: root/mm/usercopy.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-13net: ipv4: remove unnecessary check on orig_oifDavid Ahern1-1/+1
rt_iif is going to be set to either 0 or orig_oif. If orig_oif is 0 it amounts to the same end result so remove the check. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13vxlan: change vxlan_[config_]validate() to use netlink_ext_ack for error reportingGirish Moodalbail1-26/+73
The kernel log is not where users expect error messages for netlink requests; as we have extended acks now, we can replace pr_debug() with NL_SET_ERR_MSG_ATTR(). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13tap: XDP supportJason Wang1-7/+142
This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13net: export some generic xdp helpersJason Wang2-6/+10
This patch tries to export some generic xdp helpers to drivers. This can let driver to do XDP for a specific skb. This is useful for the case when the packet is hard to be processed at page level directly (e.g jumbo/GSO frame). With this patch, there's no need for driver to forbid the XDP set when configuration is not suitable. Instead, it can defer the XDP for packets that is hard to be processed directly after skb is created. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13tap: use build_skb() for small packetJason Wang1-21/+91
We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13rtnelink: Move link dump consistency check out of the loopJakub Sitnicki1-4/+2
Calls to rtnl_dump_ifinfo() are protected by RTNL lock. So are the {list,unlist}_netdevice() calls where we bump the net->dev_base_seq number. For this reason net->dev_base_seq can't change under out feet while we're looping over links in rtnl_dump_ifinfo(). So move the check for net->dev_base_seq change (since the last time we were called) out of the loop. This way we avoid giving a wrong impression that there are concurrent updates to the link list going on while we're iterating over them. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11liquidio: moved ptp_enable to octeon_device structureIntiyaz Basha2-9/+11
ptp_enable was a global static variable. Moved this global variable to octeon_device structure and removed extra device id check. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11selftests: bpf: add check for ip XDP redirectWilliam Tu1-0/+5
Kernel test robot reports error when running test_xdp_redirect.sh. Check if ip tool supports xdpgeneric, if not, skip the test. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11mlxsw: make mlxsw_config_profile constBhumika Goyal3-3/+3
Make these structures const as they only stored in the profile field of a mlxsw_driver structure, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11openvswitch: Remove unnecessary newlines from OVS_NLERR usesJoe Perches2-10/+6
OVS_NLERR already adds a newline so these just add blank lines to the logging. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11nfp: send control message when MAC representors are createdSimon Horman3-3/+80
The firmware expects a MAC_REPR control message when a MAC representor is created. The driver should expect a PORTMOD message to follow which will provide the link states of the physical port associated with the MAC representor. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.Tonghao Zhang1-2/+1
Because we remove the UFO support, we will also remove the CHECKSUM_UNNECESSARY check in skb_needs_check(). Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11wan: dscc4: convert to plain DMA APIAlexey Khoroshilov1-45/+51
Make use the dma_*() interfaces rather than the pci_*() interfaces. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11wan: dscc4: add checks for dma mapping errorsAlexey Khoroshilov1-16/+37
The driver does not check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: ipv4: set orig_oif based on fib result for local trafficDavid Ahern1-0/+6
Attempts to connect to a local address with a socket bound to a device with the local address hangs if there is no listener: $ ip addr sh dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 02:e0:f9:1c:00:37 brd ff:ff:ff:ff:ff:ff inet 10.100.1.4/24 scope global eth1 valid_lft forever preferred_lft forever inet6 2001:db8:1::4/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:37/64 scope link valid_lft forever preferred_lft forever $ vrf-test -I eth1 -r 10.100.1.4 <hangs when there is no server> (don't let the command name fool you; vrf-test works without vrfs.) The problem is that the original intended device, eth1 in this case, is lost when the tcp reset is sent, so the socket lookup does not find a match for the reset and the connect attempt hangs. Fix by adjusting orig_oif for local traffic to the device from the fib lookup result. With this patch you get the more user friendly: $ vrf-test -I eth1 -r 10.100.1.4 connect failed: 111: Connection refused orig_oif is saved to the newly created rtable as rt_iif and when set it is used as the dif for socket lookups. It is set based on flowi4_oif passed in to ip_route_output_key_hash_rcu and will be set to either the loopback device, an l3mdev device, nothing (flowi4_oif = 0 which is the case in the example above) or a netdev index depending on the lookup path. In each case, resetting orig_oif to the device in the fib result for the RTN_LOCAL case allows the actual device to be preserved as the skb tx and rx is done over the loopback or VRF device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11fsl/fman: implement several errata workaroundsFlorinel Iordache1-25/+93
Implemented workarounds for the following dTSEC Erratum: A002, A004, A0012, A0014, A004839 on several operations that involve MAC CFG register changes: adjust link, rx pause frames, modify MAC address. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11hns3pf: Fix some harmless copy and paste bugsDan Carpenter1-2/+2
These were copy and paste bugs, but I believe they are harmless. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11hns3pf: fix hns3_del_tunnel_port()Dan Carpenter1-1/+1
This function has a copy and paste bug so it accidentally calls the add function instead of the delete function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11ARM64: dts: rockchip: Enable gmac2phy for rk3328-evbDavid Wu1-0/+17
Enable the gmac2phy, make the gmac2phy work on the rk3328-evb board. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11ARM64: dts: rockchip: Add gmac2phy node support for rk3328David Wu1-0/+39
The gmac2phy controller of rk3328 is connected to integrated PHY directly inside, add the node for the integrated PHY support. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11ARM: dts: rk3228-evb: Enable the integrated PHY for gmacDavid Wu1-0/+34
This patch enables the integrated PHY for rk3228 evb board by default. To use the external 1000M PHY on evb board, need to make some switch of evb board to be on. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Add integrated PHY supprot for rk3328David Wu1-3/+23
There are two mac controllers in the rk3328, the one connects to external PHY, and the other one connects to integrated PHY. Like the mac of external PHY, the integrated PHY's mac also needs to configure the related mac registers at GRF. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Add integrated PHY support for rk3228David Wu1-0/+12
There is only one mac controller in rk3228, which could connect to external PHY or integrated PHY, use the grf_com_mux bit15 to route external/integrated PHY. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Add integrated PHY supportDavid Wu1-4/+95
To make integrated PHY work, need to configure the PHY clock, PHY cru reset and related registers. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11Documentation: net: phy: Add phy-is-integrated bindingDavid Wu1-0/+5
Add the documentation for integrated PHY. A boolean property indicates the PHY is integrated into the same physical package as the Ethernet MAC. If needed, muxers should be configured to ensure the integrated PHY is used. The absence of this property indicates the muxers should be configured so that the external PHY is used. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Remove unwanted code for rk3328_set_to_rmii()David Wu1-3/+0
This is wrong setting for rk3328_set_to_rmii(), so remove it. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11arm64: defconfig: Enable CONFIG_ROCKCHIP_PHYDavid Wu1-0/+1
Make the rockchip PHY driver built into the kernel. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11multi_v7_defconfig: Make rockchip PHY built-inDavid Wu1-0/+1
Enable the rockchip PHY driver for multi_v7_defconfig builds. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: phy: Add rockchip PHY driver supportDavid Wu3-0/+239
Support integrated ethernet PHY currently. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11forcedeth: replace init_timer_deferrable with setup_deferrable_timerZhu Yanjun1-3/+2
Replace init_timer_deferrable with setup_deferrable_timer to simplify the source code. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11drivers: net: davinci_mdio: print bus frequencyMaxim Uvarov1-2/+4
Frequency can be adjusted in DT it make sense to print current used value on driver init. Signed-off-by: Max Uvarov <muvarov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11drivers: net: davinci_mdio: remove busy loop on wait user accessMaxim Uvarov1-1/+3
Polling 14 mdio devices on single mdio bus eats 30% of 1Ghz cpu time due to busy loop in wait(). Add small delay to relax cpu. Signed-off-by: Max Uvarov <muvarov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: keep track of some non-fatal overload conditionsstephen hemminger3-6/+17
Add ethtool statistics for case where send chimmeny buffer is exhausted and driver has to fall back to doing scatter/gather send. Also, add statistic for case where ring buffer is full and receive completions are delayed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: allow controlling send/recv buffer sizestephen hemminger3-39/+157
Control the size of the buffer areas via ethtool ring settings. They aren't really traditional hardware rings, but host API breaks receive and send buffer into chunks. The final size of the chunks are controlled by the host. The default value of send and receive buffer area for host DMA is much larger than it needs to be. Experimentation shows that 4M receive and 1M send is sufficient. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: remove unnecessary check for NULL hdrstephen hemminger1-4/+3
The function init_page_array is always called with a valid pointer to RNDIS header. No check for NULL is needed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: remove unnecessary cast of void pointerstephen hemminger1-5/+4
Assignment to a typed pointer is sufficient in C. No cast is needed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: whitespace cleanupstephen hemminger1-5/+6
Fix some minor indentation issues. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: no need to allocate send/receive on numa nodestephen hemminger1-14/+5
The send and receive buffers are both per-device (not per-channel). The associated NUMA node is a property of the CPU which is per-channel therefore it makes no sense to force the receive/send buffer to be allocated on a particular node (since it is a shared resource). Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: check error return when restoring channels and mtustephen hemminger1-2/+14
If setting new values fails, and the attempt to restore original settings fails. Then log an error and leave device down. This should never happen, but if it does don't go down in flames. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: propagate MAC address change to VF slavestephen hemminger1-11/+15
If VF is slaved to synthetic device, then any change to netvsc MAC address should be propagated to the slave device. If slave device doesn't support MAC address change then it should also be an error to attempt to change synthetic NIC MAC address. It also fixes the error unwind in the original code. If give a bad address, the old code would change the device MAC address anyway. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: don't signal host twice if emptystephen hemminger1-4/+0
When hv_pkt_iter_next() returns NULL, it has already called hv_pkt_iter_close(). Calling it twice can lead to extra host signal. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: delay setup of VF devicestephen hemminger2-8/+9
When VF device is discovered, delay bring it automatically up in order to allow userspace to some simple changes (like renaming). Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11phylink: Fix an uninitialized variable bugDan Carpenter1-1/+1
"ret" isn't necessarily initialized here. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11liquidio: removed check for queue size alignmentIntiyaz Basha1-7/+0
There is no restriction on queue size alignment. Hence removing check for valid queue size. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11liquidio: rx/tx queue cleanupIntiyaz Basha2-0/+8
When deleting a queue, clear its corresponding bit in the qmask, vfree its memory, clear out the pointer that's pointing to it, and decrement the queue count. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <fmanlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: remove cops->tcf_cl_offloadJiri Pirko7-36/+15
cops->tcf_cl_offload is no longer needed, as the drivers check what they can and cannot offload using the classid identify helpers. So remove this. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: remove handle propagation down to the driversJiri Pirko1-2/+0
There is no longer need to use handle in drivers, so remove it from tc_cls_common_offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: use newly added classid identity helpersJiri Pirko8-9/+30
Instead of checking handle, which does not have the inner class information and drivers wrongly assume clsact->egress as ingress, use the newly introduced classid identification helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: propagate classid down to offload driversJiri Pirko1-0/+2
Drivers need classid to decide they support this specific qdisc+class or not. So propagate it down via the tc_cls_common_offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: Add helpers to identify classidsJiri Pirko1-0/+14
Offloading drivers need to understand what qdisc class a filter is added to. Currently they only need to identify ingress, clsact->ingress and clsact->egress. So provide these helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.