| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pcnet_cs,serial_cs:
add cis of PreMax ethernet pcmcia card,
and some Sierra Wireless serial card(AC555, AC7xx, AC8xx).
use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same.
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
r8169 card drop incoming VLAN tagged MTU byte large jumbo frames
It looks to compare current and maximal packet sizes hardware use
'<' operator, not '<='.
Bug introduced by commit fdd7b4c3302c93f6833e338903ea77245eb510b4
("r8169: fix crash when large packets are received")
Signed-off-by: Raimonds Cicans <ray@apollo.lv>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prevent read outside array bounds.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Policy routing is not looked up by mark on reverse path filtering.
This fixes it.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct sk_buff kmemcheck annotations enlarged this structure by 8/16 bytes
Fix this by moving 'protocol' inside flags1 bitfield,
and queue_mapping inside flags2 bitfield.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reworks a previous workaround (commit 7d3cabbcc) for an issue
in hardware where noise on the interconnect between the MAC and PHY could
be generated by a lower power mode (K1) at 1000Mbps resulting in bad
packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps
and when the cable is disconnected. The original version of this
workaround was found to be incomplete.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On PCH-based (82577/82578) and some ICH8-based parts (82566) there is an
issue with the hardware automatically configuring the PHY with contents
from the EEPROM after the PHY is reset, so do the configuration by the
driver instead. This was already similarly done for some 82566 parts in
e1000_phy_hw_reset_ich8lan() but needs to be done after other resets,
so move the PHY configuration code to its own function and call after
all PHY resets.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A change in how PHYs are electrically isolated caused all PHYs to be
isolated followed by reverting that isolation for the selected PHY.
Unfortunately, isolating the selected PHY for even a short period of
time can result in DHCP negotiation taking more than 10 seconds on certain
embedded configurations delaying boot time as reported by Bernhard Kaindl.
This patch reverts the change to how PHYs are isolated yet still works
around the issue for 82552 needing the selected PHY's BMCR register to
be written after the unused PHYs are isolated. This code is moved below
the setting of nic->phy ID in order to do the 82552-specific workaround.
Cc: Bernhard Kaindl <bernhard.kaindl@gmx.net>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Errata 411920 indicates that any "invalidate entire instruction cache"
operation can fail if the right conditions are present. This is not
limited just to those operations in flush.c, but elsewhere. Place the
workaround in the already existing __flush_icache_all() function
instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem
to allocate data structures. However, we call memory_present() after
declaring memory to bootmem, but before we've reserved areas.
This leads to sparsemem data structures being overwritten later in the
kernel's initialization (when slab initializes.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
I've not touched the other stuff here but the word "locking" comes to mind.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syscallno is unsigned
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are some places where we do like:
pte = pte_map();
do {
(do break in some conditions)
} while (pte++, ...);
pte_unmap(pte - 1);
But if the loop breaks at the first loop, pte_unmap() unmaps invalid pte.
This patch is a fix for this problem.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewd-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I have an HP HDX 18 laptop, and noted that the configuration of the
accelerometer needs to be x_inverted.
Signed-off-by: Ian E. Morgan <penguin.wrangler@gmail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Correct orientation for HP EliteBook 8530w.
Reported-by: Jörgen Jonssson <jorgen.jonsson@saitek.se>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I have learned that the 6730b and 6730s have different accelerometer
orientation, and have modified the driver accordingly (diff attached),
while dropping the wild guess for AMD based 6735 having the same
orientation as Intel based 6730 (this is not true for any other related
series/family, thus is not probable for 673x).
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the case where cpuidle_idle_call() returns before changing state due to
a need_resched(), it was returning with IRQs disabled.
The idle path assumes that the platform specific idle code returns with
interrupts enabled (although this too is undocumented AFAICT) and on ARM
we have a WARN_ON(!(irqs_disabled()) when returning from the idle loop, so
the user-visible effects were only a warning since interrupts were
eventually re-enabled later.
On x86, this same problem exists, but there is no WARN_ON() to detect it.
As on ARM, the interrupts are eventually re-enabled, so I'm not sure of
any actual bugs triggered by this. It's primarily a
correctness/consistency fix.
This patch ensures IRQs are (re)enabled before returning.
Reported-by: Hemanth V <hemanthv@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Cc: <stable@kernel.org> [2.6.31.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ingo reported that the following lines triggered a false warning,
static struct lock_class_key rcu_lock_key;
struct lockdep_map rcu_lock_map =
STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
EXPORT_SYMBOL_GPL(rcu_lock_map);
from kernel/rcutree.c , and the false warning looked like this,
WARNING: EXPORT_SYMBOL(foo); should immediately follow its
function/variable
+EXPORT_SYMBOL_GPL(rcu_lock_map);
We actually should be checking the statement before the EXPORT_* for a
mention of the exported object, and complain where it is not there.
[akpm@linux-foundation.org: coding-style fixes]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the following code,
union thread_union init_thread_union
__attribute__((__section__(".data.init_task"))) =
{ INIT_THREAD_INFO(init_task) };
There is a non-conforming declaration. It should really be like the
following,
union thread_union init_thread_union
__attribute__((__section__(".data.init_task"))) = {
INIT_THREAD_INFO(init_task)
};
However, checkpatch doesn't catch this right now because it doesn't
correctly evaluate the "__attribute__".
It is not at all clear that we care what preceeds an assignment style
attribute when we find the open brace. Relax the test so we do not need
to check the __attribute__.
Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The macro concatenation (##) sequence can cause false errors when checking
macro's. Checkpatch doesn't currently know about the operator.
For example this line,
+ entry = (struct ftrace_raw_##call *)raw_data; \
is correct but it produces the following error,
ERROR: need consistent spacing around '*' (ctx:WxB)
+ entry = (struct ftrace_raw_##call *)raw_data;\
^
The line above doesn't have any spacing problems, and if you remove the
macro concatenation sequence checkpatch doesn't give any errors.
Extend identifier handling to include ## concatenation within the
definition of an identifier.
Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We are allowing context scanning checks to apply against the first line of
context outside at the end of the hunk. This can lead to false matches to
patch names leading to various perl warnings. Correctly stop at the
bottom of the hunk.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prevent known non types being detected as modifiers. Ensure we do not
look at any type which starts with a keyword.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, sparsemem is only available if EXPERIMENTAL is enabled.
However, it hasn't ever been marked experimental.
It's been about four years since sparsemem was merged, and we have
platforms which depend on it; allow architectures to decide whether
sparsemem should be the default memory model.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allow csrows to properly initialize when the topology only has active
channels on 2 and 3. This new check allows proper detection and
initialization in this topology. Only checking the first mrt that
represented channels 0 and 1 is not sufficient.
I also fixed up the related debug information path. I can submit as a 2nd
patch if needed.
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Acked-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When building without CONFIG_PCI the edac_pci_idx variable is unused,
causing a build-time warning. Wrap the variable in #ifdef CONFIG_PCI,
just like the rest of the PCI support.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The i5400 EDAC driver has several bugs with chip-select row computation
which most likely lead to bugs in detailed error reporting. Attempts to
contact the authors have gone mostly unanswered so I am presenting my diff
here. I do not subscribe to lkml and would appreciate being kept in the
cc.
The most egregious problem was miscalculating the addresses of MTR
registers after register 0 by assuming they are 32bit rather than 16.
This caused the driver to miss half of the memories. Most motherboards
tend to have only 8 dimm slots and not 16, so this may not have been
noticed before.
Further, the row calculations multiplied the number of dimms several
times, ultimately ending up with a maximum row of 32. The chipset only
supports 4 dimms in each of 4 channels, so csrow could not be higher than
4 unless you use a row per-rank with dual-rank dimms. I opted to
eliminate this behavior as it is confusing to the user and the error
reporting works by slot and not rank. This gives a much clearer view of
memory by slot and channel in /sys.
Signed-off-by: Jeff Roberson <jroberson@jroberson.net>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Having ->procname but not ->proc_handler is valid when PROC_SYSCTL=n,
people use such combination to reduce ifdefs with non-standard handlers.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14408
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Peter Teoh <htmldeveloper@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Augment the documentation of the hwmon sysfs API to accomodate ACPI power
meters and the current desired behavior of power capping hardware drivers.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The gpio_twl4030_probe() function calls gpio_twl4030_remove(), and the
former has __devinit, so the latter cannot use __devexit. Otherwise we
hit the section mismatch warning:
WARNING: drivers/gpio/built-in.o(.devinit.text+0x71a): Section mismatch
in reference from the function _gpio_twl4030_probe() to the function
.devexit.text:_gpio_twl4030_remove()
The function __devinit _gpio_twl4030_probe() references a function
__devexit _gpio_twl4030_remove().
This is often seen when error handling in the init function uses
functionality in the exit path.
The fix is often to remove the __devexit annotation of
_gpio_twl4030_remove() so it may be used outside an exit section.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The IBM Saturn serial card has only one port. Without that fixup,
the kernel thinks it has two, which confuses userland setup and
admin tools as well.
[akpm@linux-foundation.org: fix pci-ids.h layout]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Michael Reed <mreed10@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for ADDI-DATA GmbH PCI-Express communication cards:
APCIe-7300
APCIe-7420
APCIe-7500
APCIe-7800
Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c
Signed-off-by: Krauth Julien <Krauth.Julien@addi-data.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
is_power_of_2() appears not to be constant enough for BUILD_BUG_ON()
after the latest rework, so replace it with an open-coded test.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Isolators putting a page back to the LRU do not hold the page lock, and if
the page is mlocked, another thread might munlock it concurrently.
Expecting this, the putback code re-checks the evictability of a page when
it just moved it to the unevictable list in order to correct its decision.
The problem, however, is that ordering is not garuanteed between setting
PG_lru when moving the page to the list and checking PG_mlocked
afterwards:
#0: #1
spin_lock()
if (TestClearPageMlocked())
if (PageLRU())
move to evictable list
SetPageLRU()
spin_unlock()
if (!PageMlocked())
move to evictable list
The PageMlocked() check may get reordered before SetPageLRU() in #0,
resulting in #0 not moving the still mlocked page, and in #1 failing to
isolate and move the page as well. The page is now stranded on the
unevictable list.
The race condition is very unlikely. The consequence currently is one
page falling off the reclaim grid and eventually getting freed with
PG_unevictable set, which triggers a warning in the page allocator.
TestClearPageMlocked() in #1 already provides full memory barrier
semantics.
This patch adds an explicit full barrier to force ordering between
SetPageLRU() and PageMlocked() so that either one of the competitors
rescues the page.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If migrate_prep is failed, new variable is leaked. This patch fixes it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If mbind() receives an invalid address, do_mbind leaks a page. The
following test program detects this leak.
This patch fixes it.
migrate_efault.c
=======================================
#include <numaif.h>
#include <numa.h>
#include <sys/mman.h>
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
static unsigned long pagesize;
static void* make_hole_mapping(void)
{
void* addr;
addr = mmap(NULL, pagesize*3, PROT_READ|PROT_WRITE,
MAP_ANON|MAP_PRIVATE, 0, 0);
if (addr == MAP_FAILED)
return NULL;
/* make page populate */
memset(addr, 0, pagesize*3);
/* make memory hole */
munmap(addr+pagesize, pagesize);
return addr;
}
int main(int argc, char** argv)
{
void* addr;
int ch;
int node;
struct bitmask *nmask = numa_allocate_nodemask();
int err;
int node_set = 0;
while ((ch = getopt(argc, argv, "n:")) != -1){
switch (ch){
case 'n':
node = strtol(optarg, NULL, 0);
numa_bitmask_setbit(nmask, node);
node_set = 1;
break;
default:
;
}
}
argc -= optind;
argv += optind;
if (!node_set)
numa_bitmask_setbit(nmask, 0);
pagesize = getpagesize();
addr = make_hole_mapping();
err = mbind(addr, pagesize*3, MPOL_BIND, nmask->maskp, nmask->size, MPOL_MF_MOVE_ALL);
if (err)
perror("mbind ");
return 0;
}
=======================================
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A particular fsfuzzer run caused an hfs file system to crash on mount.
This is due to a corrupted MDB extent record causing a miscalculation of
HFS_I(inode)->first_blocks for the extent tree. If the extent records are
zereod out, it won't trigger the first_blocks special case. Instead it
falls through to the extent code which we're still in the middle of
initializing.
This patch catches the 0 size extent records, reports the corruption, and
fails the mount.
Reported-by: Ramon de Carvalho Valle <rcvalle@linux.vnet.ibm.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit bb21488482bd36eae6b30b014d93619063773fd4 ("[PATCH] switch loop")
started to pass NULL bdev to ioctl hook.
Steps to reproduce:
[boot with loop.max_part=1]
[mount -o loop something so mount fails]
BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
IP: [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
PGD 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online
CPU 0
Modules linked in: zfs nvidia(P) [last unloaded: zfs]
Pid: 15177, comm: mount Tainted: P 2.6.32-rc4-zfs #2 Satellite X200
RIP: 0010:[<ffffffff811486ee>] [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
RSP: 0018:ffff88003b3d5bb8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000
R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da
FS: 00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920)
Stack:
ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000
<0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0
<0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000
Call Trace:
[<ffffffff812f95f5>] ? schedule_timeout+0x1f5/0x250
[<ffffffff811547d9>] ? rb_insert_color+0x109/0x140
[<ffffffff812fb754>] ? _spin_unlock_irq+0x14/0x40
[<ffffffff812f84c6>] ? wait_for_common+0x66/0x170
[<ffffffff8105a280>] ? default_wake_function+0x0/0x10
[<ffffffff810f8258>] ioctl_by_bdev+0x38/0x50
[<ffffffff811d2481>] loop_clr_fd+0x1e1/0x210
[<ffffffff811d2522>] lo_release+0x72/0x80
[<ffffffff810f934c>] __blkdev_put+0x1ac/0x1d0
[<ffffffff810f937b>] blkdev_put+0xb/0x10
[<ffffffff810f93b9>] blkdev_close+0x39/0x60
[<ffffffff810ccef3>] __fput+0xd3/0x230
[<ffffffff810cd06d>] fput+0x1d/0x30
[<ffffffff810c9680>] filp_close+0x50/0x80
[<ffffffff81061f11>] put_files_struct+0x81/0x100
[<ffffffff81061fde>] exit_files+0x4e/0x60
[<ffffffff81063ec5>] do_exit+0x6b5/0x730
[<ffffffff8107b279>] ? up_read+0x9/0x10
[<ffffffff8104c86e>] ? do_page_fault+0x18e/0x2a0
[<ffffffff81063f81>] do_group_exit+0x41/0xc0
[<ffffffff81064012>] sys_exit_group+0x12/0x20
[<ffffffff81030deb>] system_call_fastpath+0x16/0x1b
Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86
RIP [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
RSP <ffff88003b3d5bb8>
CR2: 00000000000000b8
---[ end trace c0b4d3c3118d1427 ]---
Fixing recursive fault but reboot is needed!
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is possible to have !Anon but SwapBacked pages, and some apps could
create huge number of such pages with MAP_SHARED|MAP_ANONYMOUS. These
pages go into the ANON lru list, and hence shall not be protected: we only
care mapped executable files. Failing to do so may trigger OOM.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert
commit 71de1ccbe1fb40203edd3beb473f8580d917d2ca
Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
AuthorDate: Mon Sep 21 17:01:31 2009 -0700
Commit: Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Tue Sep 22 07:17:27 2009 -0700
mm: oom analysis: add buffer cache information to show_free_areas()
show_free_areas() is called during page allocation failures, and page
allocation failures can occur in any calling context.
But nr_blockdev_pages() takes VFS locks which should not be taken from
hard IRQ context (at least). The result is lockdep warnings (and
deadlockability) during page allocation failures.
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As found in <http://bugs.debian.org/550010>, hfsplus is using type u32
rather than sector_t for some sector number calculations.
In particular, hfsplus_get_block() does:
u32 ablock, dblock, mask;
...
map_bh(bh_result, sb, (dblock << HFSPLUS_SB(sb).fs_shift) + HFSPLUS_SB(sb).blockoffset + (iblock & mask));
I am not confident that I can find and fix all cases where a sector number
may be truncated. For now, avoid data loss by refusing to mount HFS+
volumes with more than 2^32 sectors (2TB).
[akpm@linux-foundation.org: fix 32 and 64-bit issues]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
K: is for keyword. Syntax is perl extended regex.
Reorganized header documentation and indent the section entry descriptions
so that the first K: would not be considered a regex to match by
get_maintainer.pl
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Based on an idea from Wolfram Sang.
Add search for MAINTAINERS line "K:" regex pattern match in a patch or file
Matches are added after file pattern matches
Add --keywords command line switch (default 1, on)
Change version to 0.21
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Integrate P:/M: lines
Remove L: linux-kernel@vger.kernel.org
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Ken Kawasaki
Raimonds Cicans
roel kluin
jamal
Eric Dumazet
Bruce Allan
Russell King
Alan Cox
Daisuke Nishimura
Ian E. Morgan
Éric Piel
Pavel Herrmann
Kevin Hilman
Andy Whitcroft
Russell King
Keith Mannthey
Ira W. Snyder
Jeff Roberson
Alexey Dobriyan
Darrick J. Wong
Mike Frysinger
Benjamin Herrenschmidt
Krauth.Julien
Haavard Skinnemoen
Johannes Weiner
KOSAKI Motohiro
Jeff Mahoney
Wu Fengguang
Andrew Morton
Ben Hutchings
Bartlomiej Zolnierkiewicz
Grant Likely
Joe Perches