| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are some typos, fix them.
s/regsitration/registration
s/santity/sanity
s/decremeting/decrementing
Signed-off-by: Ethon Paul <ethp@qq.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Link: http://lkml.kernel.org/r/20200411071544.16222-1-ethp@qq.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When LRU cost only shows up on one list, we abruptly stop scanning that
list altogether. That's an extreme reaction: by the time the other list
starts thrashing and the pendulum swings back, we may have no recent age
information on the first list anymore, and we could have significant
latencies until the scanner has caught up.
Soften this change in the feedback system by ensuring that no list
receives less than a third of overall pressure, and only distribute the
other 66% according to LRU cost. This ensures that we maintain a minimum
rate of aging on the entire workingset while it's being pressured, while
still allowing a generous rate of convergence when the relative sizes of
the lists need to adjust.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-15-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The VM tries to balance reclaim pressure between anon and file so as to
reduce the amount of IO incurred due to the memory shortage. It already
counts refaults and swapins, but in addition it should also count
writepage calls during reclaim.
For swap, this is obvious: it's IO that wouldn't have occurred if the
anonymous memory hadn't been under memory pressure. From a relative
balancing point of view this makes sense as well: even if anon is cold and
reclaimable, a cache that isn't thrashing may have equally cold pages that
don't require IO to reclaim.
For file writeback, it's trickier: some of the reclaim writepage IO would
have likely occurred anyway due to dirty expiration. But not all of it -
premature writeback reduces batching and generates additional writes.
Since the flushers are already woken up by the time the VM starts writing
cache pages one by one, let's assume that we'e likely causing writes that
wouldn't have happened without memory pressure. In addition, the per-page
cost of IO would have probably been much cheaper if written in larger
batches from the flusher thread rather than the single-page-writes from
kswapd.
For our purposes - getting the trend right to accelerate convergence on a
stable state that doesn't require paging at all - this is sufficiently
accurate. If we later wanted to optimize for sustained thrashing, we can
still refine the measurements.
Count all writepage calls from kswapd as IO cost toward the LRU that the
page belongs to.
Why do this dynamically? Don't we know in advance that anon pages require
IO to reclaim, and so could build in a static bias?
First, scanning is not the same as reclaiming. If all the anon pages are
referenced, we may not swap for a while just because we're scanning the
anon list. During this time, however, it's important that we age
anonymous memory and the page cache at the same rate so that their
hot-cold gradients are comparable. Everything else being equal, we still
want to reclaim the coldest memory overall.
Second, we keep copies in swap unless the page changes. If there is
swap-backed data that's mostly read (tmpfs file) and has been swapped out
before, we can reclaim it without incurring additional IO.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We split the LRU lists into anon and file, and we rebalance the scan
pressure between them when one of them begins thrashing: if the file cache
experiences workingset refaults, we increase the pressure on anonymous
pages; if the workload is stalled on swapins, we increase the pressure on
the file cache instead.
With cgroups and their nested LRU lists, we currently don't do this
correctly. While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, LRU pressure balancing is
done on an individual cgroup LRU level. As a result, when one cgroup is
thrashing on the filesystem cache while a sibling may have cold anonymous
pages, pressure doesn't get equalized between them.
This patch moves LRU balancing decision to the root of reclaim - the same
level where the LRU order is established.
It does this by tracking LRU cost recursively, so that every level of the
cgroup tree knows the aggregate LRU cost of all memory within its domain.
When the page scanner calculates the scan balance for any given individual
cgroup's LRU list, it uses the values from the ancestor cgroup that
initiated the reclaim cycle.
If one sibling is then thrashing on the cache, it will tip the pressure
balance inside its ancestors, and the next hierarchical reclaim iteration
will go more after the anon pages in the tree.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the LRUs were split into anon and file lists, the VM has been
balancing between page cache and anonymous pages based on per-list ratios
of scanned vs. rotated pages. In most cases that tips page reclaim
towards the list that is easier to reclaim and has the fewest actively
used pages, but there are a few problems with it:
1. Refaults and LRU rotations are weighted the same way, even though
one costs IO and the other costs a bit of CPU.
2. The less we scan an LRU list based on already observed rotations,
the more we increase the sampling interval for new references, and
rotations become even more likely on that list. This can enter a
death spiral in which we stop looking at one list completely until
the other one is all but annihilated by page reclaim.
Since commit a528910e12ec ("mm: thrash detection-based file cache sizing")
we have refault detection for the page cache. Along with swapin events,
they are good indicators of when the file or anon list, respectively, is
too small for its workingset and needs to grow.
For example, if the page cache is thrashing, the cache pages need more
time in memory, while there may be colder pages on the anonymous list.
Likewise, if swapped pages are faulting back in, it indicates that we
reclaim anonymous pages too aggressively and should back off.
Replace LRU rotations with refaults and swapins as the basis for relative
reclaim cost of the two LRUs. This will have the VM target list balances
that incur the least amount of IO on aggregate.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-12-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When shrinking the active file list we rotate referenced pages only when
they're in an executable mapping. The others get deactivated. When it
comes to balancing scan pressure, though, we count all referenced pages as
rotated, even the deactivated ones. Yet they do not carry the same cost
to the system: the deactivated page *might* refault later on, but the
deactivation is tangible progress toward freeing pages; rotations on the
other hand cost time and effort without getting any closer to freeing
memory.
Don't treat both events as equal. The following patch will hook up LRU
balancing to cache and anon refaults, which are a much more concrete cost
signal for reclaiming one list over the other. Thus, remove the maybe-IO
cost bias from page references, and only note the CPU cost for actual
rotations that prevent the pages from getting reclaimed.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-11-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, scan pressure between the anon and file LRU lists is balanced
based on a mixture of reclaim efficiency and a somewhat vague notion of
"value" of having certain pages in memory over others. That concept of
value is problematic, because it has caused us to count any event that
remotely makes one LRU list more or less preferrable for reclaim, even
when these events are not directly comparable and impose very different
costs on the system. One example is referenced file pages that we still
deactivate and referenced anonymous pages that we actually rotate back to
the head of the list.
There is also conceptual overlap with the LRU algorithm itself. By
rotating recently used pages instead of reclaiming them, the algorithm
already biases the applied scan pressure based on page value. Thus, when
rebalancing scan pressure due to rotations, we should think of reclaim
cost, and leave assessing the page value to the LRU algorithm.
Lastly, considering both value-increasing as well as value-decreasing
events can sometimes cause the same type of event to be counted twice,
i.e. how rotating a page increases the LRU value, while reclaiming it
succesfully decreases the value. In itself this will balance out fine,
but it quietly skews the impact of events that are only recorded once.
The abstract metric of "value", the murky relationship with the LRU
algorithm, and accounting both negative and positive events make the
current pressure balancing model hard to reason about and modify.
This patch switches to a balancing model of accounting the concrete,
actually observed cost of reclaiming one LRU over another. For now, that
cost includes pages that are scanned but rotated back to the list head.
Subsequent patches will add consideration for IO caused by refaulting of
recently evicted pages.
Replace struct zone_reclaim_stat with two cost counters in the lruvec, and
make everything that affects cost go through a new lru_note_cost()
function.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-9-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we calculate the relative scan pressure between the anon and file LRU
lists, we have to assume that reclaim_stat can contain zeroes. To avoid
div0 crashes, we add 1 to all denominators like so:
anon_prio = swappiness;
file_prio = 200 - anon_prio;
[...]
/*
* The amount of pressure on anon vs file pages is inversely
* proportional to the fraction of recently scanned pages on
* each list that were recently referenced and in active use.
*/
ap = anon_prio * (reclaim_stat->recent_scanned[0] + 1);
ap /= reclaim_stat->recent_rotated[0] + 1;
fp = file_prio * (reclaim_stat->recent_scanned[1] + 1);
fp /= reclaim_stat->recent_rotated[1] + 1;
spin_unlock_irq(&pgdat->lru_lock);
fraction[0] = ap;
fraction[1] = fp;
denominator = ap + fp + 1;
While reclaim_stat can contain 0, it's not actually possible for ap + fp
to be 0. One of anon_prio or file_prio could be zero, but they must still
add up to 200. And the reclaim_stat fraction, due to the +1 in there, is
always at least 1. So if one of the two numerators is 0, the other one
can't be. ap + fp is always at least 1. Drop the + 1.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-8-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the advent of fast random IO devices (SSDs, PMEM) and in-memory swap
devices such as zswap, it's possible for swap to be much faster than
filesystems, and for swapping to be preferable over thrashing filesystem
caches.
Allow setting swappiness - which defines the rough relative IO cost of
cache misses between page cache and swap-backed pages - to reflect such
situations by making the swap-preferred range configurable.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Having statistics on pages scanned and pages reclaimed for both anon and
file pages makes it easier to evaluate changes to LRU balancing.
While at it, clean up the stat-keeping mess for isolation, putback,
reclaim stats etc. a bit: first the physical LRU operation (isolation and
putback), followed by vmstats, reclaim_stats, and then vm events.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-3-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
try_to_compact_zone() has been replaced by try_to_compact_pages(), which
is necessary to be updated in the comment of should_continue_reclaim().
Signed-off-by: Qiwu Chen <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200501034907.22991-1-chenqiwu@xiaomi.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 3c710c1ad11b ("mm, vmscan extract shrink_page_list reclaim counters
into a struct") changed data type for the function, so changing return
type for funciton and its caller.
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1588168259-25604-1-git-send-email-maninder1.s@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix an nr_isolate_* mismatch problem between cma and dirty lazyfree pages.
If try_to_unmap_one is used for reclaim and it detects a dirty lazyfree
page, then the lazyfree page is changed to a normal anon page having
SwapBacked by commit 802a3a92ad7a ("mm: reclaim MADV_FREE pages"). Even
with the change, reclaim context correctly counts isolated files because
it uses is_file_lru to distinguish file. And the change to anon is not
happened if try_to_unmap_one is used for migration. So migration context
like compaction also correctly counts isolated files even though it uses
page_is_file_lru insted of is_file_lru. Recently page_is_file_cache was
renamed to page_is_file_lru by commit 9de4f22a60f7 ("mm: code cleanup for
MADV_FREE").
But the nr_isolate_* mismatch problem happens on cma alloc. There is
reclaim_clean_pages_from_list which is being used only by cma. It was
introduced by commit 02c6de8d757c ("mm: cma: discard clean pages during
contiguous allocation instead of migration") to reclaim clean file pages
without migration. The cma alloc uses both reclaim_clean_pages_from_list
and migrate_pages, and it uses page_is_file_lru to count isolated files.
If there are dirty lazyfree pages allocated from cma memory region, the
pages are counted as isolated file at the beginging but are counted as
isolated anon after finished.
Mem-Info:
Node 0 active_anon:3045904kB inactive_anon:611448kB active_file:14892kB inactive_file:205636kB unevictable:10416kB isolated(anon):0kB isolated(file):37664kB mapped:630216kB dirty:384kB writeback:0kB shmem:42576kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
Like log above, there were too much isolated files, 37664kB, which
triggers too_many_isolated in reclaim even when there is no actually
isolated file in system wide. It could be reproducible by running two
programs, writing on MADV_FREE page and doing cma alloc, respectively.
Although isolated anon is 0, I found that the internal value of isolated
anon was the negative value of isolated file.
Fix this by compensating the isolated count for both LRU lists. Count
non-discarded lazyfree pages in shrink_page_list, then compensate the
counted number in reclaim_clean_pages_from_list.
Reported-by: Yong-Taek Lee <ytk.lee@samsung.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200426011718.30246-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We already defined the helper update_lru_size().
Let's use this to reduce code duplication.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200331221550.1011-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
None of the three callers of get_compound_page_dtor() want to know the
value; they just want to call the function. Replace it with
destroy_compound_page() which calls the dtor for them.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200517105051.9352-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
classzone_idx is just different name for high_zoneidx now. So, integrate
them and add some comment to struct alloc_context in order to reduce
future confusion about the meaning of this variable.
The accessor, ac_classzone_idx() is also removed since it isn't needed
after integration.
In addition to integration, this patch also renames high_zoneidx to
highest_zoneidx since it represents more precise meaning.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/1587095923-7515-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PF_LESS_THROTTLE exists for loop-back nfsd (and a similar need in the
loop block driver and callers of prctl(PR_SET_IO_FLUSHER)), where a
daemon needs to write to one bdi (the final bdi) in order to free up
writes queued to another bdi (the client bdi).
The daemon sets PF_LESS_THROTTLE and gets a larger allowance of dirty
pages, so that it can still dirty pages after other processses have been
throttled. The purpose of this is to avoid deadlock that happen when
the PF_LESS_THROTTLE process must write for any dirty pages to be freed,
but it is being thottled and cannot write.
This approach was designed when all threads were blocked equally,
independently on which device they were writing to, or how fast it was.
Since that time the writeback algorithm has changed substantially with
different threads getting different allowances based on non-trivial
heuristics. This means the simple "add 25%" heuristic is no longer
reliable.
The important issue is not that the daemon needs a *larger* dirty page
allowance, but that it needs a *private* dirty page allowance, so that
dirty pages for the "client" bdi that it is helping to clear (the bdi
for an NFS filesystem or loop block device etc) do not affect the
throttling of the daemon writing to the "final" bdi.
This patch changes the heuristic so that the task is not throttled when
the bdi it is writing to has a dirty page count below below (or equal
to) the free-run threshold for that bdi. This ensures it will always be
able to have some pages in flight, and so will not deadlock.
In a steady-state, it is expected that PF_LOCAL_THROTTLE tasks might
still be throttled by global threshold, but that is acceptable as it is
only the deadlock state that is interesting for this flag.
This approach of "only throttle when target bdi is busy" is consistent
with the other use of PF_LESS_THROTTLE in current_may_throttle(), were
it causes attention to be focussed only on the target bdi.
So this patch
- renames PF_LESS_THROTTLE to PF_LOCAL_THROTTLE,
- removes the 25% bonus that that flag gives, and
- If PF_LOCAL_THROTTLE is set, don't delay at all unless the
global and the local free-run thresholds are exceeded.
Note that previously realtime threads were treated the same as
PF_LESS_THROTTLE threads. This patch does *not* change the behvaiour
for real-time threads, so it is now different from the behaviour of nfsd
and loop tasks. I don't know what is wanted for realtime.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chuck Lever <chuck.lever@oracle.com> [nfsd]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: http://lkml.kernel.org/r/87ftbf7gs3.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit a9e7c39fa9fd9 ("mm/vmscan.c: remove 7th argument of
isolate_lru_pages()"), the explanation of 'mode' argument has been
unnecessary. Let's remove it.
Signed-off-by: Qiwu Chen <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200501090346.2894-1-chenqiwu@xiaomi.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some comments for MADV_FREE is revised and added to help people understand
the MADV_FREE code, especially the page flag, PG_swapbacked. This makes
page_is_file_cache() isn't consistent with its comments. So the function
is renamed to page_is_file_lru() to make them consistent again. All these
are put in one patch as one logical change.
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: David Rientjes <rientjes@google.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200317100342.2730705-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sc->memcg_low_skipped resets skipped_deactivate to 0 but this is not
needed as this code path is never reachable with skipped_deactivate != 0
due to previous sc->skipped_deactivate branch.
[mhocko@kernel.org: rewrite changelog]
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200319165938.23354-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This gives some size improvement:
$size mm/vmscan.o (before)
text data bss dec hex filename
53670 24123 12 77805 12fed mm/vmscan.o
$size mm/vmscan.o (after)
text data bss dec hex filename
53648 24123 12 77783 12fd7 mm/vmscan.o
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Previously 0 was assigned to variable 'lruvec_size', but the variable was
never read later. So the assignment can be removed.
Fixes: f87bccde6a7d ("mm/vmscan: remove unused lru_pages argument")
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/20200229214022.11853-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pgdat->kswapd_classzone_idx could be accessed concurrently in
wakeup_kswapd(). Plain writes and reads without any lock protection
result in data races. Fix them by adding a pair of READ|WRITE_ONCE() as
well as saving a branch (compilers might well optimize the original code
in an unintentional way anyway). While at it, also take care of
pgdat->kswapd_order and non-kswapd threads in allow_direct_reclaim(). The
data races were reported by KCSAN,
BUG: KCSAN: data-race in wakeup_kswapd / wakeup_kswapd
write to 0xffff9f427ffff2dc of 4 bytes by task 7454 on cpu 13:
wakeup_kswapd+0xf1/0x400
wakeup_kswapd at mm/vmscan.c:3967
wake_all_kswapds+0x59/0xc0
wake_all_kswapds at mm/page_alloc.c:4241
__alloc_pages_slowpath+0xdcc/0x1290
__alloc_pages_slowpath at mm/page_alloc.c:4512
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x16e/0x6f0
__handle_mm_fault+0xcd5/0xd40
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
1 lock held by mtest01/7454:
#0: ffff9f425afe8808 (&mm->mmap_sem#2){++++}, at:
do_page_fault+0x143/0x6f9
do_user_addr_fault at arch/x86/mm/fault.c:1405
(inlined by) do_page_fault at arch/x86/mm/fault.c:1539
irq event stamp: 6944085
count_memcg_event_mm+0x1a6/0x270
count_memcg_event_mm+0x119/0x270
__do_softirq+0x34c/0x57c
irq_exit+0xa2/0xc0
read to 0xffff9f427ffff2dc of 4 bytes by task 7472 on cpu 38:
wakeup_kswapd+0xc8/0x400
wake_all_kswapds+0x59/0xc0
__alloc_pages_slowpath+0xdcc/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x16e/0x6f0
__handle_mm_fault+0xcd5/0xd40
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
1 lock held by mtest01/7472:
#0: ffff9f425a9ac148 (&mm->mmap_sem#2){++++}, at:
do_page_fault+0x143/0x6f9
irq event stamp: 6793561
count_memcg_event_mm+0x1a6/0x270
count_memcg_event_mm+0x119/0x270
__do_softirq+0x34c/0x57c
irq_exit+0xa2/0xc0
BUG: KCSAN: data-race in kswapd / wakeup_kswapd
write to 0xffff90973ffff2dc of 4 bytes by task 820 on cpu 6:
kswapd+0x27c/0x8d0
kthread+0x1e0/0x200
ret_from_fork+0x27/0x50
read to 0xffff90973ffff2dc of 4 bytes by task 6299 on cpu 0:
wakeup_kswapd+0xf3/0x450
wake_all_kswapds+0x59/0xc0
__alloc_pages_slowpath+0xdcc/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x170/0x700
__handle_mm_fault+0xc9f/0xd00
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/1582749472-5171-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kswapd kernel thread starts either with a CPU affinity set to the full cpu
mask of its target node or without any affinity at all if the node is
CPUless. There is a cpu hotplug callback (kswapd_cpu_online) that
implements an elaborate way to update this mask when a cpu is onlined.
It is not really clear whether there is any actual benefit from this
scheme. Completely CPU-less NUMA nodes rarely gain a new CPU during
runtime. Drop the code for that reason. If there is a real usecase then
we can resurrect and simplify the code.
[mhocko@suse.com rewrite changelog]
Suggested-by: Michal Hocko <mhocko@suse.org>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20200218224422.3407-1-richardw.yang@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The commit 98fa15f34cb3 ("mm: replace all open encodings for
NUMA_NO_NODE") did the replacement across the kernel tree, but we got
some more in vmscan.c since then.
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1581568298-45317-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When backporting commit 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping
pagevecs") to our 4.9 kernel, our test bench noticed around 10% down with
a couple of vm-scalability's test cases (lru-file-readonce,
lru-file-readtwice and lru-file-mmap-read). I didn't see that much down
on my VM (32c-64g-2nodes). It might be caused by the test configuration,
which is 32c-256g with NUMA disabled and the tests were run in root memcg,
so the tests actually stress only one inactive and active lru. It sounds
not very usual in mordern production environment.
That commit did two major changes:
1. Call page_evictable()
2. Use smp_mb to force the PG_lru set visible
It looks they contribute the most overhead. The page_evictable() is a
function which does function prologue and epilogue, and that was used by
page reclaim path only. However, lru add is a very hot path, so it sounds
better to make it inline. However, it calls page_mapping() which is not
inlined either, but the disassemble shows it doesn't do push and pop
operations and it sounds not very straightforward to inline it.
Other than this, it sounds smp_mb() is not necessary for x86 since
SetPageLRU is atomic which enforces memory barrier already, replace it
with smp_mb__after_atomic() in the following patch.
With the two fixes applied, the tests can get back around 5% on that test
bench and get back normal on my VM. Since the test bench configuration is
not that usual and I also saw around 6% up on the latest upstream, so it
sounds good enough IMHO.
The below is test data (lru-file-readtwice throughput) against the v5.6-rc4:
mainline w/ inline fix
150MB 154MB
With this patch the throughput gets 2.67% up. The data with using
smp_mb__after_atomic() is showed in the following patch.
Shakeel Butt did the below test:
On a real machine with limiting the 'dd' on a single node and reading 100
GiB sparse file (less than a single node). Just ran a single instance to
not cause the lru lock contention. The cmdline used is "dd if=file-100GiB
of=/dev/null bs=4k". Ran the cmd 10 times with drop_caches in between and
measured the time it took.
Without patch: 56.64143 +- 0.672 sec
With patches: 56.10 +- 0.21 sec
[akpm@linux-foundation.org: move page_evictable() to internal.h]
Fixes: 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping pagevecs")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1584500541-46817-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 68600f623d69 ("mm: don't miss the last page because of round-off
error") makes the scan size round up to @denominator regardless of the
memory cgroup's state, online or offline. This affects the overall
reclaiming behavior: the corresponding LRU list is eligible for
reclaiming only when its size logically right shifted by @sc->priority
is bigger than zero in the former formula.
For example, the inactive anonymous LRU list should have at least 0x4000
pages to be eligible for reclaiming when we have 60/12 for
swappiness/priority and without taking scan/rotation ratio into account.
After the roundup is applied, the inactive anonymous LRU list becomes
eligible for reclaiming when its size is bigger than or equal to 0x1000
in the same condition.
(0x4000 >> 12) * 60 / (60 + 140 + 1) = 1
((0x1000 >> 12) * 60) + 200) / (60 + 140 + 1) = 1
aarch64 has 512MB huge page size when the base page size is 64KB. The
memory cgroup that has a huge page is always eligible for reclaiming in
that case.
The reclaiming is likely to stop after the huge page is reclaimed,
meaing the further iteration on @sc->priority and the silbing and child
memory cgroups will be skipped. The overall behaviour has been changed.
This fixes the issue by applying the roundup to offlined memory cgroups
only, to give more preference to reclaim memory from offlined memory
cgroup. It sounds reasonable as those memory is unlikedly to be used by
anyone.
The issue was found by starting up 8 VMs on a Ampere Mustang machine,
which has 8 CPUs and 16 GB memory. Each VM is given with 2 vCPUs and
2GB memory. It took 264 seconds for all VMs to be completely up and
784MB swap is consumed after that. With this patch applied, it took 236
seconds and 60MB swap to do same thing. So there is 10% performance
improvement for my case. Note that KSM is disable while THP is enabled
in the testing.
total used free shared buff/cache available
Mem: 16196 10065 2049 16 4081 3749
Swap: 8175 784 7391
total used free shared buff/cache available
Mem: 16196 11324 3656 24 1215 2936
Swap: 8175 60 8115
Link: http://lkml.kernel.org/r/20200211024514.8730-1-gshan@redhat.com
Fixes: 68600f623d69 ("mm: don't miss the last page because of round-off error")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 1b2ffb7896ad ("[PATCH] Zone reclaim: Allow modification of zone
reclaim behavior")' defined RECLAIM_OFF/RECLAIM_ZONE, but never use
them, so better to remove them.
[dwagner@suse.de: fix sanity checks enabling]
Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de
[akpm@linux-foundation.org: renumber the bits for neatness]
Link: http://lkml.kernel.org/r/1579005573-58923-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This macro was never used in git history. So better to remove.
Link: http://lkml.kernel.org/r/1579006500-127143-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return value of shrink_node is not used, so remove unnecessary
operations.
Link: http://lkml.kernel.org/r/20191128143524.3223-1-fishland@aliyun.com
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on
memcg kmem"), shrinkers' idr is protected by CONFIG_MEMCG instead of
CONFIG_MEMCG_KMEM, so it makes no sense to protect shrinker idr replace
with CONFIG_MEMCG_KMEM.
And in the CONFIG_MEMCG && CONFIG_SLOB case, shrinker_idr contains only
shrinker, and it is deferred_split_shrinker. But it is never actually
called, since idr_replace() is never compiled due to the wrong #ifdef.
The deferred_split_shrinker all the time is staying in half-registered
state, and it's never called for subordinate mem cgroups.
Link: http://lkml.kernel.org/r/1575486978-45249-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on memcg kmem")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the typo "resheduled" -> "rescheduled" in comment
Link: http://lkml.kernel.org/r/1573486327-9591-1-git-send-email-xianting_tian@126.com
Signed-off-by: Xianting Tian <xianting_tian@126.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We split the LRU lists into inactive and an active parts to maximize
workingset protection while allowing just enough inactive cache space to
faciltate readahead and writeback for one-off file accesses (e.g. a
linear scan through a file, or logging); or just enough inactive anon to
maintain recent reference information when reclaim needs to swap.
With cgroups and their nested LRU lists, we currently don't do this
correctly. While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, inactive:active size
decisions are done on a per-cgroup level. As a result, we'll reclaim a
cgroup's workingset when it doesn't have cold pages, even when one of its
siblings has plenty of it that should be reclaimed first.
For example: workload A has 50M worth of hot cache but doesn't do any
one-off file accesses; meanwhile, parallel workload B scans files and
rarely accesses the same page twice.
If these workloads were to run in an uncgrouped system, A would be
protected from the high rate of cache faults from B. But if they were put
in parallel cgroups for memory accounting purposes, B's fast cache fault
rate would push out the hot cache pages of A. This is unexpected and
undesirable - the "scan resistance" of the page cache is broken.
This patch moves inactive:active size balancing decisions to the root of
reclaim - the same level where the LRU order is established.
It does this by looking at the recursive size of the inactive and the
active file sets of the cgroup subtree at the beginning of the reclaim
cycle, and then making a decision - scan or skip active pages - that
applies throughout the entire run and to every cgroup involved.
With that in place, in the test above, the VM will recognize that there
are plenty of inactive pages in the combined cache set of workloads A and
B and prefer the one-off cache in B over the hot pages in A. The scan
resistance of the cache is restored.
[cai@lca.pw: fix some -Wenum-conversion warnings]
Link: http://lkml.kernel.org/r/1573848697-29262-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/20191107205334.158354-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We use refault information to determine whether the cache workingset is
stable or transitioning, and dynamically adjust the inactive:active file
LRU ratio so as to maximize protection from one-off cache during stable
periods, and minimize IO during transitions.
With cgroups and their nested LRU lists, we currently don't do this
correctly. While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, refaults only affect the
local LRU order in the cgroup in which they are occuring. As a result,
cache transitions can take longer in a cgrouped system as the active pages
of sibling cgroups aren't challenged when they should be.
[ Right now, this is somewhat theoretical, because the siblings, under
continued regular reclaim pressure, should eventually run out of
inactive pages - and since inactive:active *size* balancing is also
done on a cgroup-local level, we will challenge the active pages
eventually in most cases. But the next patch will move that relative
size enforcement to the reclaim root as well, and then this patch
here will be necessary to propagate refault pressure to siblings. ]
This patch moves refault detection to the root of reclaim. Instead of
remembering the cgroup owner of an evicted page, remember the cgroup that
caused the reclaim to happen. When refaults later occur, they'll
correctly influence the cross-cgroup LRU order that reclaim follows.
I.e. if global reclaim kicked out pages in some subgroup A/B/C, the
refault of those pages will challenge the global LRU order, and not just
the local order down inside C.
[hannes@cmpxchg.org: use page_memcg() instead of another lookup]
Link: http://lkml.kernel.org/r/20191115160722.GA309754@cmpxchg.org
Link: http://lkml.kernel.org/r/20191107205334.158354-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: fix page aging across multiple cgroups".
When applications are put into unconfigured cgroups for memory accounting
purposes, the cgrouping itself should not change the behavior of the page
reclaim code. We expect the VM to reclaim the coldest pages in the
system. But right now the VM can reclaim hot pages in one cgroup while
there is eligible cold cache in others.
This is because one part of the reclaim algorithm isn't truly cgroup
hierarchy aware: the inactive/active list balancing. That is the part
that is supposed to protect hot cache data from one-off streaming IO.
The recursive cgroup reclaim scheme will scan and rotate the physical LRU
lists of each eligible cgroup at the same rate in a round-robin fashion,
thereby establishing a relative order among the pages of all those
cgroups. However, the inactive/active balancing decisions are made
locally within each cgroup, so when a cgroup is running low on cold pages,
its hot pages will get reclaimed - even when sibling cgroups have plenty
of cold cache eligible in the same reclaim run.
For example:
[root@ham ~]# head -n1 /proc/meminfo
MemTotal: 1016336 kB
[root@ham ~]# ./reclaimtest2.sh
Establishing 50M active files in cgroup A...
Hot pages cached: 12800/12800 workingset-a
Linearly scanning through 18G of file data in cgroup B:
real 0m4.269s
user 0m0.051s
sys 0m4.182s
Hot pages cached: 134/12800 workingset-a
The streaming IO in B, which doesn't benefit from caching at all, pushes
out most of the workingset in A.
Solution
This series fixes the problem by elevating inactive/active balancing
decisions to the toplevel of the reclaim run. This is either a cgroup
that hit its limit, or straight-up global reclaim if there is physical
memory pressure. From there, it takes a recursive view of the cgroup
subtree to decide whether page deactivation is necessary.
In the test above, the VM will then recognize that cgroup B has plenty of
eligible cold cache, and that the hot pages in A can be spared:
[root@ham ~]# ./reclaimtest2.sh
Establishing 50M active files in cgroup A...
Hot pages cached: 12800/12800 workingset-a
Linearly scanning through 18G of file data in cgroup B:
real 0m4.244s
user 0m0.064s
sys 0m4.177s
Hot pages cached: 12800/12800 workingset-a
Implementation
Whether active pages can be deactivated or not is influenced by two
factors: the inactive list dropping below a minimum size relative to the
active list, and the occurence of refaults.
This patch series first moves refault detection to the reclaim root, then
enforces the minimum inactive size based on a recursive view of the cgroup
tree's LRUs.
History
Note that this actually never worked correctly in Linux cgroups. In the
past it worked for global reclaim and leaf limit reclaim only (we used to
have two physical LRU linkages per page), but it never worked for
intermediate limit reclaim over multiple leaf cgroups.
We're noticing this now because 1) we're putting everything into cgroups
for accounting, not just the things we want to control and 2) we're moving
away from leaf limits that invoke reclaim on individual cgroups, toward
large tree reclaim, triggered by high-level limits, or physical memory
pressure that is influenced by local protections such as memory.low and
memory.min instead.
This patch (of 3):
When file pages are lower than the watermark on a node, we try to force
scan anonymous pages to counter-act the balancing algorithms preference
for new file pages when they are likely thrashing. This is a node-level
decision, but it's currently made each time we look at an lruvec. This is
unnecessarily expensive and also a layering violation that makes the code
harder to understand.
Clean this up by making the check once per node and setting a flag in the
scan_control.
Link: http://lkml.kernel.org/r/20191107205334.158354-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current writeback congestion tracking has separate flags for kswapd
reclaim (node level) and cgroup limit reclaim (memcg-node level). This is
unnecessarily complicated: the lruvec is an existing abstraction layer for
that node-memcg intersection.
Introduce lruvec->flags and LRUVEC_CONGESTED. Then track that at the
reclaim root level, which is either the NUMA node for global reclaim, or
the cgroup-node intersection for cgroup reclaim.
Link: http://lkml.kernel.org/r/20191022144803.302233-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This function is getting long and unwieldy, split out the memcg bits.
The updated shrink_node() handles the generic (node) reclaim aspects:
- global vmpressure notifications
- writeback and congestion throttling
- reclaim/compaction management
- kswapd giving up on unreclaimable nodes
It then calls a new shrink_node_memcgs() which handles cgroup specifics:
- the cgroup tree traversal
- memory.low considerations
- per-cgroup slab shrinking callbacks
- per-cgroup vmpressure notifications
[hannes@cmpxchg.org: rename "root" to "target_memcg", per Roman]
Link: http://lkml.kernel.org/r/20191025143640.GA386981@cmpxchg.org
Link: http://lkml.kernel.org/r/20191022144803.302233-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An lruvec holds LRU pages owned by a certain NUMA node and cgroup.
Instead of awkwardly passing around a combination of a pgdat and a memcg
pointer, pass down the lruvec as soon as we can look it up.
Nested callers that need to access node or cgroup properties can look them
them up if necessary, but there are only a few cases.
Link: http://lkml.kernel.org/r/20191022144803.302233-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most of the function body is inside a loop, which imposes an additional
indentation and scoping level that makes the code a bit hard to follow and
modify.
The looping only happens in case of reclaim-compaction, which isn't the
common case. So rather than adding yet another function level to the
reclaim path and have every reclaim invocation go through a level that
only exists for one specific cornercase, use a retry goto.
Link: http://lkml.kernel.org/r/20191022144803.302233-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Seven years after introducing the global_reclaim() function, I still have
to double take when reading a callsite. I don't know how others do it,
this is a terrible name.
Invert the meaning and rename it to cgroup_reclaim().
[ After all, "global reclaim" is just regular reclaim invoked from the
page allocator. It's reclaim on behalf of a cgroup limit that is a
special case of reclaim, and should be explicit - not the reverse. ]
sane_reclaim() isn't very descriptive either: it tests whether we can use
the regular writeback throttling - available during regular page reclaim
or cgroup2 limit reclaim - or need to use the broken
wait_on_page_writeback() method. Use "writeback_throttling_sane()".
Link: http://lkml.kernel.org/r/20191022144803.302233-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
inactive_list_is_low() should be about one thing: checking the ratio
between inactive and active list. Kitchensink checks like the one for
swap space makes the function hard to use and modify its callsites.
Luckly, most callers already have an understanding of the swap situation,
so it's easy to clean up.
get_scan_count() has its own, memcg-aware swap check, and doesn't even get
to the inactive_list_is_low() check on the anon list when there is no swap
space available.
shrink_list() is called on the results of get_scan_count(), so that check
is redundant too.
age_active_anon() has its own totalswap_pages check right before it checks
the list proportions.
The shrink_node_memcg() site is the only one that doesn't do its own swap
check. Add it there.
Then delete the swap check from inactive_list_is_low().
Link: http://lkml.kernel.org/r/20191022144803.302233-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a per-memcg lruvec and a NUMA node lruvec. Which one is being
used is somewhat confusing right now, and it's easy to make mistakes -
especially when it comes to global reclaim.
How it works: when memory cgroups are enabled, we always use the
root_mem_cgroup's per-node lruvecs. When memory cgroups are not compiled
in or disabled at runtime, we use pgdat->lruvec.
Document that in a comment.
Due to the way the reclaim code is generalized, all lookups use the
mem_cgroup_lruvec() helper function, and nobody should have to find the
right lruvec manually right now. But to avoid future mistakes, rename the
pgdat->lruvec member to pgdat->__lruvec and delete the convenience wrapper
that suggests it's a commonly accessed member.
While in this area, swap the mem_cgroup_lruvec() argument order. The name
suggests a memcg operation, yet it takes a pgdat first and a memcg second.
I have to double take every time I call this. Fix that.
Link: http://lkml.kernel.org/r/20191022144803.302233-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: vmscan: cgroup-related cleanups".
Here are 8 patches that clean up the reclaim code's interaction with
cgroups a bit. They're not supposed to change any behavior, just make
the implementation easier to understand and work with.
This patch (of 8):
This function currently takes the node or lruvec size and subtracts the
zones that are excluded by the classzone index of the allocation. It uses
four different types of counters to do this.
Just add up the eligible zones.
[cai@lca.pw: fix an undefined behavior for zone id]
Link: http://lkml.kernel.org/r/20191108204407.1435-1-cai@lca.pw
[akpm@linux-foundation.org: deal with the MAX_NR_ZONES special case. per Qian Cai]
Link: http://lkml.kernel.org/r/64E60F6F-7582-427B-8DD5-EF97B1656F5A@lca.pw
Link: http://lkml.kernel.org/r/20191022144803.302233-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since lumpy reclaim was removed in v3.5 scan_control is not used by
may_write_to_{queue|inode} and pageout() anymore, remove the unused
parameter.
Link: http://lkml.kernel.org/r/1570124498-19300-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since 9092c71bb724 ("mm: use sc->priority for slab shrink targets") the
argument 'unsigned long *lru_pages' passed around with no purpose. Remove
it.
Link: http://lkml.kernel.org/r/20190228083329.31892-4-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 1ba6fc9af35b ("mm: vmscan: do not share cgroup iteration
between reclaimers"), the memcg reclaim does not bail out earlier based
on sc->nr_reclaimed and will traverse all the nodes. All the
reclaimable pages of the memcg on all the nodes will be scanned relative
to the reclaim priority. So, there is no need to maintain state
regarding which node to start the memcg reclaim from.
This patch effectively reverts the commit 889976dbcb12 ("memcg: reclaim
memory from nodes in round-robin order") and commit 453a9bf347f1
("memcg: fix numa scan information update to be triggered by memory
event").
[shakeelb@google.com: v2]
Link: http://lkml.kernel.org/r/20191030204232.139424-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20191029234753.224143-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__remove_mapping() assumes that pages can only be either base pages or
HPAGE_PMD_SIZE. Ask the page what size it is.
Link: http://lkml.kernel.org/r/20191017164223.2762148-4-songliubraving@fb.com
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 1a61ab8038e72 ("mm: memcontrol: replace zone summing with
lruvec_page_state()") has made lruvec_page_state to use per-cpu counters
instead of calculating it directly from lru_zone_size with an idea that
this would be more effective.
Tim has reported that this is not really the case for their database
benchmark which is showing an opposite results where lruvec_page_state
is taking up a huge chunk of CPU cycles (about 25% of the system time
which is roughly 7% of total cpu cycles) on 5.3 kernels. The workload
is running on a larger machine (96cpus), it has many cgroups (500) and
it is heavily direct reclaim bound.
Tim Chen said:
: The problem can also be reproduced by running simple multi-threaded
: pmbench benchmark with a fast Optane SSD swap (see profile below).
:
:
: 6.15% 3.08% pmbench [kernel.vmlinux] [k] lruvec_lru_size
: |
: |--3.07%--lruvec_lru_size
: | |
: | |--2.11%--cpumask_next
: | | |
: | | --1.66%--find_next_bit
: | |
: | --0.57%--call_function_interrupt
: | |
: | --0.55%--smp_call_function_interrupt
: |
: |--1.59%--0x441f0fc3d009
: | _ops_rdtsc_init_base_freq
: | access_histogram
: | page_fault
: | __do_page_fault
: | handle_mm_fault
: | __handle_mm_fault
: | |
: | --1.54%--do_swap_page
: | swapin_readahead
: | swap_cluster_readahead
: | |
: | --1.53%--read_swap_cache_async
: | __read_swap_cache_async
: | alloc_pages_vma
: | __alloc_pages_nodemask
: | __alloc_pages_slowpath
: | try_to_free_pages
: | do_try_to_free_pages
: | shrink_node
: | shrink_node_memcg
: | |
: | |--0.77%--lruvec_lru_size
: | |
: | --0.76%--inactive_list_is_low
: | |
: | --0.76%--lruvec_lru_size
: |
: --1.50%--measure_read
: page_fault
: __do_page_fault
: handle_mm_fault
: __handle_mm_fault
: do_swap_page
: swapin_readahead
: swap_cluster_readahead
: |
: --1.48%--read_swap_cache_async
: __read_swap_cache_async
: alloc_pages_vma
: __alloc_pages_nodemask
: __alloc_pages_slowpath
: try_to_free_pages
: do_try_to_free_pages
: shrink_node
: shrink_node_memcg
: |
: |--0.75%--inactive_list_is_low
: | |
: | --0.75%--lruvec_lru_size
: |
: --0.73%--lruvec_lru_size
The likely culprit is the cache traffic the lruvec_page_state_local
generates. Dave Hansen says:
: I was thinking purely of the cache footprint. If it's reading
: pn->lruvec_stat_local->count[idx] is three separate cachelines, so 192
: bytes of cache *96 CPUs = 18k of data, mostly read-only. 1 cgroup would
: be 18k of data for the whole system and the caching would be pretty
: efficient and all 18k would probably survive a tight page fault loop in
: the L1. 500 cgroups would be ~90k of data per CPU thread which doesn't
: fit in the L1 and probably wouldn't survive a tight page fault loop if
: both logical threads were banging on different cgroups.
:
: It's just a theory, but it's why I noted the number of cgroups when I
: initially saw this show up in profiles
Fix the regression by partially reverting the said commit and calculate
the lru size explicitly.
Link: http://lkml.kernel.org/r/20190905071034.16822-1-honglei.wang@oracle.com
Fixes: 1a61ab8038e72 ("mm: memcontrol: replace zone summing with lruvec_page_state()")
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org> [5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch is an incremental improvement on the existing
memory.{low,min} relative reclaim work to base its scan pressure
calculations on how much protection is available compared to the current
usage, rather than how much the current usage is over some protection
threshold.
This change doesn't change the experience for the user in the normal
case too much. One benefit is that it replaces the (somewhat arbitrary)
100% cutoff with an indefinite slope, which makes it easier to ballpark
a memory.low value.
As well as this, the old methodology doesn't quite apply generically to
machines with varying amounts of physical memory. Let's say we have a
top level cgroup, workload.slice, and another top level cgroup,
system-management.slice. We want to roughly give 12G to
system-management.slice, so on a 32GB machine we set memory.low to 20GB
in workload.slice, and on a 64GB machine we set memory.low to 52GB.
However, because these are relative amounts to the total machine size,
while the amount of memory we want to generally be willing to yield to
system.slice is absolute (12G), we end up putting more pressure on
system.slice just because we have a larger machine and a larger workload
to fill it, which seems fairly unintuitive. With this new behaviour, we
don't end up with this unintended side effect.
Previously the way that memory.low protection works is that if you are
50% over a certain baseline, you get 50% of your normal scan pressure.
This is certainly better than the previous cliff-edge behaviour, but it
can be improved even further by always considering memory under the
currently enforced protection threshold to be out of bounds. This means
that we can set relatively low memory.low thresholds for variable or
bursty workloads while still getting a reasonable level of protection,
whereas with the previous version we may still trivially hit the 100%
clamp. The previous 100% clamp is also somewhat arbitrary, whereas this
one is more concretely based on the currently enforced protection
threshold, which is likely easier to reason about.
There is also a subtle issue with the way that proportional reclaim
worked previously -- it promotes having no memory.low, since it makes
pressure higher during low reclaim. This happens because we base our
scan pressure modulation on how far memory.current is between memory.min
and memory.low, but if memory.low is unset, we only use the overage
method. In most cromulent configurations, this then means that we end
up with *more* pressure than with no memory.low at all when we're in low
reclaim, which is not really very usable or expected.
With this patch, memory.low and memory.min affect reclaim pressure in a
more understandable and composable way. For example, from a user
standpoint, "protected" memory now remains untouchable from a reclaim
aggression standpoint, and users can also have more confidence that
bursty workloads will still receive some amount of guaranteed
protection.
Link: http://lkml.kernel.org/r/20190322160307.GA3316@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Roman points out that when when we do the low reclaim pass, we scale the
reclaim pressure relative to position between 0 and the maximum
protection threshold.
However, if the maximum protection is based on memory.elow, and
memory.emin is above zero, this means we still may get binary behaviour
on second-pass low reclaim. This is because we scale starting at 0, not
starting at memory.emin, and since we don't scan at all below emin, we
end up with cliff behaviour.
This should be a fairly uncommon case since usually we don't go into the
second pass, but it makes sense to scale our low reclaim pressure
starting at emin.
You can test this by catting two large sparse files, one in a cgroup
with emin set to some moderate size compared to physical RAM, and
another cgroup without any emin. In both cgroups, set an elow larger
than 50% of physical RAM. The one with emin will have less page
scanning, as reclaim pressure is lower.
Rebase on top of and apply the same idea as what was applied to handle
cgroup_memory=disable properly for the original proportional patch
http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name ("mm,
memcg: Handle cgroup_disable=memory when getting memcg protection").
Link: http://lkml.kernel.org/r/20190201051810.GA18895@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Suggested-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Ethon Paul
Johannes Weiner
Qiwu Chen
Maninder Singh
Jaewon Kim
Wei Yang
Matthew Wilcox (Oracle)
Joonsoo Kim
NeilBrown
Huang Ying
Mateusz Nosek
Kirill Tkhai
Qian Cai
Wei Yang
Yang Shi
Gavin Shan
Alex Shi
Liu Song
Xianting Tian
Andrey Ryabinin
Shakeel Butt
William Kucharski
Honglei Wang
Chris Down