| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The internal VM "mmap()" interfaces are based on the mmap target doing
everything using page indexes rather than byte offsets, because
traditionally (ie 32-bit) we had the situation that the byte offset
didn't fit in a register. So while the mmap virtual address was limited
by the word size of the architecture, the backing store was not.
So we're basically passing "pgoff" around as a page index, in order to
be able to describe backing store locations that are much bigger than
the word size (think files larger than 4GB etc).
But while this all makes a ton of sense conceptually, we've been dogged
by various drivers that don't really understand this, and internally
work with byte offsets, and then try to work with the page index by
turning it into a byte offset with "pgoff << PAGE_SHIFT".
Which obviously can overflow.
Adding the size of the mapping to it to get the byte offset of the end
of the backing store just exacerbates the problem, and if you then use
this overflow-prone value to check various limits of your device driver
mmap capability, you're just setting yourself up for problems.
The correct thing for drivers to do is to do their limit math in page
indices, the way the interface is designed. Because the generic mmap
code _does_ test that the index doesn't overflow, since that's what the
mmap code really cares about.
HOWEVER.
Finding and fixing various random drivers is a sisyphean task, so let's
just see if we can just make the core mmap() code do the limiting for
us. Realistically, the only "big" backing stores we need to care about
are regular files and block devices, both of which are known to do this
properly, and which have nice well-defined limits for how much data they
can access.
So let's special-case just those two known cases, and then limit other
random mmap users to a backing store that still fits in "unsigned long".
Realistically, that's not much of a limit at all on 64-bit, and on
32-bit architectures the only worry might be the GPU drivers, which can
have big physical address spaces.
To make it possible for drivers like that to say that they are 64-bit
clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the
file flags to allow drivers to mark their file descriptors as safe in
the full 64-bit mmap address space.
[ The timing for doing this is less than optimal, and this should really
go in a merge window. But realistically, this needs wide testing more
than it needs anything else, and being main-line is the only way to do
that.
So the earlier the better, even if it's outside the proper development
cycle - Linus ]
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"A collection of fixes that should to into this release. This contains:
- Set of bcache fixes from Coly, fixing regression in patches that
went into this series.
- Set of NVMe fixes by way of Keith.
- Set of bdi related fixes, one from Jan and two from Tetsuo Handa,
fixing various issues around device addition/removal.
- Two block inflight fixes from Omar, fixing issues around the
transition to using tags for blk-mq inflight accounting that we
did a few releases ago"
* tag 'for-linus-20180504' of git://git.kernel.dk/linux-block:
bdi: Fix oops in wb_workfn()
nvmet: switch loopback target state to connecting when resetting
nvme/multipath: Fix multipath disabled naming collisions
nvme/multipath: Disable runtime writable enabling parameter
nvme: Set integrity flag for user passthrough commands
nvme: fix potential memory leak in option parsing
bdi: Fix use after free bug in debugfs_remove()
bdi: wake up concurrent wb_shutdown() callers.
bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set
bcache: set dc->io_disable to true in conditional_stop_bcache_device()
bcache: add wait_for_kthread_stop() in bch_allocator_thread()
bcache: count backing device I/O error for writeback I/O
bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()
bcache: store disk name in struct cache and struct cached_dev
blk-mq: fix sysfs inflight counter
blk-mq: count allocated but not started requests in iostats inflight
|
|
syzbot is reporting use after free bug in debugfs_remove() [1].
This is because fault injection made memory allocation for
debugfs_create_file() from bdi_debug_register() from bdi_register_va()
fail and continued with setting WB_registered. But when debugfs_remove()
is called from debugfs_remove(bdi->debug_dir) from bdi_debug_unregister()
from bdi_unregister() from release_bdi() because WB_registered was set
by bdi_register_va(), IS_ERR_OR_NULL(bdi->debug_dir) == false despite
debugfs_remove(bdi->debug_dir) was already called from bdi_register_va().
Fix this by making IS_ERR_OR_NULL(bdi->debug_dir) == true.
[1] https://syzkaller.appspot.com/bug?id=5ab4efd91a96dcea9b68104f159adf4af2a6dfc1
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+049cb4ae097049dac137@syzkaller.appspotmail.com>
Fixes: 97f07697932e6faf ("bdi: convert bdi_debug_register to int")
Cc: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot is reporting hung tasks at wait_on_bit(WB_shutting_down) in
wb_shutdown() [1]. This seems to be because commit 5318ce7d46866e1d ("bdi:
Shutdown writeback on all cgwbs in cgwb_bdi_destroy()") forgot to call
wake_up_bit(WB_shutting_down) after clear_bit(WB_shutting_down).
Introduce a helper function clear_and_wake_up_bit() and use it, in order
to avoid similar errors in future.
[1] https://syzkaller.appspot.com/bug?id=b297474817af98d5796bc544e1bb806fc3da0e5e
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+c0cf869505e03bdf1a24@syzkaller.appspotmail.com>
Fixes: 5318ce7d46866e1d ("bdi: Shutdown writeback on all cgwbs in cgwb_bdi_destroy()")
Cc: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit ce9962bf7e22bb3891655c349faff618922d4a73
0day reported warnings at boot on 32-bit systems without NX support:
attempted to set unsupported pgprot: 8000000000000025 bits: 8000000000000000 supported: 7fffffffffffffff
WARNING: CPU: 0 PID: 1 at
arch/x86/include/asm/pgtable.h:540 handle_mm_fault+0xfc1/0xfe0:
check_pgprot at arch/x86/include/asm/pgtable.h:535
(inlined by) pfn_pte at arch/x86/include/asm/pgtable.h:549
(inlined by) do_anonymous_page at mm/memory.c:3169
(inlined by) handle_pte_fault at mm/memory.c:3961
(inlined by) __handle_mm_fault at mm/memory.c:4087
(inlined by) handle_mm_fault at mm/memory.c:4124
The problem is that due to the recent commit which removed auto-massaging
of page protections, filtering page permissions at PTE creation time is not
longer done, so vma->vm_page_prot is passed unfiltered to PTE creation.
Filter the page protections before they are installed in vma->vm_page_prot.
Fixes: fb43d6cb91 ("x86/mm: Do not auto-massage page protections")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: https://lkml.kernel.org/r/20180420222028.99D72858@viggo.jf.intel.com
|
|
f2fs specifies the __GFP_ZERO flag for allocating some of its pages.
Unfortunately, the page cache also uses the mapping's GFP flags for
allocating radix tree nodes. It always masked off the __GFP_HIGHMEM
flag, and masks off __GFP_ZERO in some paths, but not all. That causes
radix tree nodes to be allocated with a NULL list_head, which causes
backtraces like:
__list_del_entry+0x30/0xd0
list_lru_del+0xac/0x1ac
page_cache_tree_insert+0xd8/0x110
The __GFP_DMA and __GFP_DMA32 flags would also be able to sneak through
if they are ever used. Fix them all by using GFP_RECLAIM_MASK at the
innermost location, and remove it from earlier in the callchain.
Link: http://lkml.kernel.org/r/20180411060320.14458-2-willy@infradead.org
Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check")
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reported-by: Chris Fries <cfries@google.com>
Debugged-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If there is heavy memory pressure, page allocation with __GFP_NOWAIT
fails easily although it's order-0 request. I got below warning 9 times
for normal boot.
<snip >: page allocation failure: order:0, mode:0x2200000(GFP_NOWAIT|__GFP_NOTRACK)
.. snip ..
Call trace:
dump_backtrace+0x0/0x4
dump_stack+0xa4/0xc0
warn_alloc+0xd4/0x15c
__alloc_pages_nodemask+0xf88/0x10fc
alloc_slab_page+0x40/0x18c
new_slab+0x2b8/0x2e0
___slab_alloc+0x25c/0x464
__kmalloc+0x394/0x498
memcg_kmem_get_cache+0x114/0x2b8
kmem_cache_alloc+0x98/0x3e8
mmap_region+0x3bc/0x8c0
do_mmap+0x40c/0x43c
vm_mmap_pgoff+0x15c/0x1e4
sys_mmap+0xb0/0xc8
el0_svc_naked+0x24/0x28
Mem-Info:
active_anon:17124 inactive_anon:193 isolated_anon:0
active_file:7898 inactive_file:712955 isolated_file:55
unevictable:0 dirty:27 writeback:18 unstable:0
slab_reclaimable:12250 slab_unreclaimable:23334
mapped:19310 shmem:212 pagetables:816 bounce:0
free:36561 free_pcp:1205 free_cma:35615
Node 0 active_anon:68496kB inactive_anon:772kB active_file:31592kB inactive_file:2851820kB unevictable:0kB isolated(anon):0kB isolated(file):220kB mapped:77240kB dirty:108kB writeback:72kB shmem:848kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
DMA free:142188kB min:3056kB low:3820kB high:4584kB active_anon:10052kB inactive_anon:12kB active_file:312kB inactive_file:1412620kB unevictable:0kB writepending:0kB present:1781412kB managed:1604728kB mlocked:0kB slab_reclaimable:3592kB slab_unreclaimable:876kB kernel_stack:400kB pagetables:52kB bounce:0kB free_pcp:1436kB local_pcp:124kB free_cma:142492kB
lowmem_reserve[]: 0 1842 1842
Normal free:4056kB min:4172kB low:5212kB high:6252kB active_anon:58376kB inactive_anon:760kB active_file:31348kB inactive_file:1439040kB unevictable:0kB writepending:180kB present:2000636kB managed:1923688kB mlocked:0kB slab_reclaimable:45408kB slab_unreclaimable:92460kB kernel_stack:9680kB pagetables:3212kB bounce:0kB free_pcp:3392kB local_pcp:688kB free_cma:0kB
lowmem_reserve[]: 0 0 0
DMA: 0*4kB 0*8kB 1*16kB (C) 0*32kB 0*64kB 0*128kB 1*256kB (C) 1*512kB (C) 0*1024kB 1*2048kB (C) 34*4096kB (C) = 142096kB
Normal: 228*4kB (UMEH) 172*8kB (UMH) 23*16kB (UH) 24*32kB (H) 5*64kB (H) 1*128kB (H) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3872kB
721350 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
945512 pages RAM
0 pages HighMem/MovableOnly
63408 pages reserved
51200 pages cma reserved
__memcg_schedule_kmem_cache_create() tries to create a shadow slab cache
and the worker allocation failure is not really critical because we will
retry on the next kmem charge. We might miss some charges but that
shouldn't be critical. The excessive allocation failure report is not
very helpful.
[mhocko@kernel.org: changelog update]
Link: http://lkml.kernel.org/r/20180418022912.248417-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
My testing for the latest kernel supporting thp migration showed an
infinite loop in offlining the memory block that is filled with shmem
thps. We can get out of the loop with a signal, but kernel should return
with failure in this case.
What happens in the loop is that scan_movable_pages() repeats returning
the same pfn without any progress. That's because page migration always
fails for shmem thps.
In memory offline code, memory blocks containing unmovable pages should be
prevented from being offline targets by has_unmovable_pages() inside
start_isolate_page_range(). So it's possible to change migratability for
non-anonymous thps to avoid the issue, but it introduces more complex and
thp-specific handling in migration code, so it might not good.
So this patch is suggesting to fix the issue by enabling thp migration for
shmem thp. Both of anon/shmem thp are migratable so we don't need
precheck about the type of thps.
Link: http://lkml.kernel.org/r/20180406030706.GA2434@hori1.linux.bs1.fc.nec.co.jp
Fixes: commit 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <zi.yan@sent.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if
the page's memcg is undergoing move accounting, which occurs when a
process leaves its memcg for a new one that has
memory.move_charge_at_immigrate set.
unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if
the given inode is switching writeback domains. Switches occur when
enough writes are issued from a new domain.
This existing pattern is thus suspicious:
lock_page_memcg(page);
unlocked_inode_to_wb_begin(inode, &locked);
...
unlocked_inode_to_wb_end(inode, locked);
unlock_page_memcg(page);
If both inode switch and process memcg migration are both in-flight then
unlocked_inode_to_wb_end() will unconditionally enable interrupts while
still holding the lock_page_memcg() irq spinlock. This suggests the
possibility of deadlock if an interrupt occurs before unlock_page_memcg().
truncate
__cancel_dirty_page
lock_page_memcg
unlocked_inode_to_wb_begin
unlocked_inode_to_wb_end
<interrupts mistakenly enabled>
<interrupt>
end_page_writeback
test_clear_page_writeback
lock_page_memcg
<deadlock>
unlock_page_memcg
Due to configuration limitations this deadlock is not currently possible
because we don't mix cgroup writeback (a cgroupv2 feature) and
memory.move_charge_at_immigrate (a cgroupv1 feature).
If the kernel is hacked to always claim inode switching and memcg
moving_account, then this script triggers lockup in less than a minute:
cd /mnt/cgroup/memory
mkdir a b
echo 1 > a/memory.move_charge_at_immigrate
echo 1 > b/memory.move_charge_at_immigrate
(
echo $BASHPID > a/cgroup.procs
while true; do
dd if=/dev/zero of=/mnt/big bs=1M count=256
done
) &
while true; do
sync
done &
sleep 1h &
SLEEP=$!
while true; do
echo $SLEEP > a/cgroup.procs
echo $SLEEP > b/cgroup.procs
done
The deadlock does not seem possible, so it's debatable if there's any
reason to modify the kernel. I suggest we should to prevent future
surprises. And Wang Long said "this deadlock occurs three times in our
environment", so there's more reason to apply this, even to stable.
Stable 4.4 has minor conflicts applying this patch. For a clean 4.4 patch
see "[PATCH for-4.4] writeback: safer lock nesting"
https://lkml.org/lkml/2018/4/11/146
Wang Long said "this deadlock occurs three times in our environment"
[gthelen@google.com: v4]
Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com
[akpm@linux-foundation.org: comment tweaks, struct initialization simplification]
Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613
Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com
Fixes: 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reported-by: Wang Long <wanglong19@meituan.com>
Acked-by: Wang Long <wanglong19@meituan.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org> [v4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Li Wang has reported that LTP move_pages04 test fails with the current
tree:
LTP move_pages04:
TFAIL : move_pages04.c:143: status[1] is EPERM, expected EFAULT
The test allocates an array of two pages, one is present while the other
is not (resp. backed by zero page) and it expects EFAULT for the second
page as the man page suggests. We are reporting EPERM which doesn't make
any sense and this is a result of a bug from cf5f16b23ec9 ("mm: unclutter
THP migration").
do_pages_move tries to handle as many pages in one batch as possible so we
queue all pages with the same node target together and that corresponds to
[start, i] range which is then used to update status array.
add_page_for_migration will correctly notice the zero (resp. !present)
page and returns with EFAULT which gets written to the status. But if
this is the last page in the array we do not update start and so the last
store_status after the loop will overwrite the range of the last batch
with NUMA_NO_NODE (which corresponds to EPERM).
Fix this by simply bailing out from the last flush if the pagelist is
empty as there is clearly nothing more to do.
Link: http://lkml.kernel.org/r/20180418121255.334-1-mhocko@kernel.org
Fixes: cf5f16b23ec9 ("mm: unclutter THP migration")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot is catching so many bugs triggered by commit 9ee332d99e4d5a97
("sget(): handle failures of register_shrinker()"). That commit expected
that calling kill_sb() from deactivate_locked_super() without successful
fill_super() is safe, but the reality was different; some callers assign
attributes which are needed for kill_sb() after sget() succeeds.
For example, [1] is a report where sb->s_mode (which seems to be either
FMODE_READ | FMODE_EXCL | FMODE_WRITE or FMODE_READ | FMODE_EXCL) is not
assigned unless sget() succeeds. But it does not worth complicate sget()
so that register_shrinker() failure path can safely call
kill_block_super() via kill_sb(). Making alloc_super() fail if memory
allocation for register_shrinker() failed is much simpler. Let's avoid
calling deactivate_locked_super() from sget_userns() by preallocating
memory for the shrinker and making register_shrinker() in sget_userns()
never fail.
[1] https://syzkaller.appspot.com/bug?id=588996a25a2587be2e3a54e8646728fb9cae44e7
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+5a170e19c963a2e0df79@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
cache_reap() is initially scheduled in start_cpu_timer() via
schedule_delayed_work_on(). But then the next iterations are scheduled
via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND.
Thus since commit ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND
work on wq_unbound_cpumask CPUs") there is no guarantee the future
iterations will run on the originally intended cpu, although it's still
preferred. I was able to demonstrate this with
/sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also
happen due to migrating timers in nohz context. As a result, some cpu's
would be calling cache_reap() more frequently and others never.
This patch uses schedule_delayed_work_on() with the current cpu when
scheduling the next iteration.
Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz
Fixes: ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Building orangefs on MMU-less machines now results in a link error
because of the newly introduced use of the filemap_page_mkwrite()
function:
ERROR: "filemap_page_mkwrite" [fs/orangefs/orangefs.ko] undefined!
This adds a dummy version for it, similar to the existing
generic_file_mmap and generic_file_readonly_mmap stubs in the same file,
to avoid the link error without adding #ifdefs in each file system that
uses these.
Link: http://lkml.kernel.org/r/20180409105555.2439976-1-arnd@arndb.de
Fixes: a5135eeab2e5 ("orangefs: implement vm_ops->fault")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__get_user_pages_fast handles errors differently from
get_user_pages_fast: the former always returns the number of pages
pinned, the later might return a negative error code.
Link: http://lkml.kernel.org/r/1522962072-182137-6-git-send-email-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
get_user_pages_fast is supposed to be a faster drop-in equivalent of
get_user_pages. As such, callers expect it to return a negative return
code when passed an invalid address, and never expect it to return 0
when passed a positive number of pages, since its documentation says:
* Returns number of pages pinned. This may be fewer than the number
* requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno.
When get_user_pages_fast fall back on get_user_pages this is exactly
what happens. Unfortunately the implementation is inconsistent: it
returns 0 if passed a kernel address, confusing callers: for example,
the following is pretty common but does not appear to do the right thing
with a kernel address:
ret = get_user_pages_fast(addr, 1, writeable, &page);
if (ret < 0)
return ret;
Change get_user_pages_fast to return -EFAULT when supplied a kernel
address to make it match expectations.
All callers have been audited for consistency with the documented
semantics.
Link: http://lkml.kernel.org/r/1522962072-182137-4-git-send-email-mst@redhat.com
Fixes: 5b65c4677a57 ("mm, x86/mm: Fix performance regression in get_user_pages_fast()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/get_user_pages_fast fixes, cleanups", v2.
Turns out get_user_pages_fast and __get_user_pages_fast return different
values on error when given a single page: __get_user_pages_fast returns
0. get_user_pages_fast returns either 0 or an error.
Callers of get_user_pages_fast expect an error so fix it up to return an
error consistently.
Stress the difference between get_user_pages_fast and
__get_user_pages_fast to make sure callers aren't confused.
This patch (of 3):
__gup_benchmark_ioctl does not handle the case where get_user_pages_fast
fails:
- a negative return code will cause a buffer overrun
- returning with partial success will cause use of uninitialized
memory.
[akpm@linux-foundation.org: simplification]
Link: http://lkml.kernel.org/r/1522962072-182137-3-git-send-email-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root. Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.
[willy@infradead.org: fix nds32, fs/dax.c]
Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Juergen Gross noticed that commit f7f99100d8d ("mm: stop zeroing memory
during allocation in vmemmap") broke XEN PV domains when deferred struct
page initialization is enabled.
This is because the xen's PagePinned() flag is getting erased from
struct pages when they are initialized later in boot.
Juergen fixed this problem by disabling deferred pages on xen pv
domains. It is desirable, however, to have this feature available as it
reduces boot time. This fix re-enables the feature for pv-dmains, and
fixes the problem the following way:
The fix is to delay setting PagePinned flag until struct pages for all
allocated memory are initialized, i.e. until after free_all_bootmem().
A new x86_init.hyper op init_after_bootmem() is called to let xen know
that boot allocator is done, and hence struct pages for all the
allocated memory are now initialized. If deferred page initialization
is enabled, the rest of struct pages are going to be initialized later
in boot once page_alloc_init_late() is called.
xen_after_bootmem() walks page table's pages and marks them pinned.
Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jia Zhang <zhang.jia@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: introduce MAP_FIXED_NOREPLACE", v2.
This has started as a follow up discussion [3][4] resulting in the
runtime failure caused by hardening patch [5] which removes MAP_FIXED
from the elf loader because MAP_FIXED is inherently dangerous as it
might silently clobber an existing underlying mapping (e.g. stack).
The reason for the failure is that some architectures enforce an
alignment for the given address hint without MAP_FIXED used (e.g. for
shared or file backed mappings).
One way around this would be excluding those archs which do alignment
tricks from the hardening [6]. The patch is really trivial but it has
been objected, rightfully so, that this screams for a more generic
solution. We basically want a non-destructive MAP_FIXED.
The first patch introduced MAP_FIXED_NOREPLACE which enforces the given
address but unlike MAP_FIXED it fails with EEXIST if the given range
conflicts with an existing one. The flag is introduced as a completely
new one rather than a MAP_FIXED extension because of the backward
compatibility. We really want a never-clobber semantic even on older
kernels which do not recognize the flag. Unfortunately mmap sucks
wrt flags evaluation because we do not EINVAL on unknown flags. On
those kernels we would simply use the traditional hint based semantic so
the caller can still get a different address (which sucks) but at least
not silently corrupt an existing mapping. I do not see a good way
around that. Except we won't export expose the new semantic to the
userspace at all.
It seems there are users who would like to have something like that.
Jemalloc has been mentioned by Michael Ellerman [7]
Florian Weimer has mentioned the following:
: glibc ld.so currently maps DSOs without hints. This means that the kernel
: will map right next to each other, and the offsets between them a completely
: predictable. We would like to change that and supply a random address in a
: window of the address space. If there is a conflict, we do not want the
: kernel to pick a non-random address. Instead, we would try again with a
: random address.
John Hubbard has mentioned CUDA example
: a) Searches /proc/<pid>/maps for a "suitable" region of available
: VA space. "Suitable" generally means it has to have a base address
: within a certain limited range (a particular device model might
: have odd limitations, for example), it has to be large enough, and
: alignment has to be large enough (again, various devices may have
: constraints that lead us to do this).
:
: This is of course subject to races with other threads in the process.
:
: Let's say it finds a region starting at va.
:
: b) Next it does:
: p = mmap(va, ...)
:
: *without* setting MAP_FIXED, of course (so va is just a hint), to
: attempt to safely reserve that region. If p != va, then in most cases,
: this is a failure (almost certainly due to another thread getting a
: mapping from that region before we did), and so this layer now has to
: call munmap(), before returning a "failure: retry" to upper layers.
:
: IMPROVEMENT: --> if instead, we could call this:
:
: p = mmap(va, ... MAP_FIXED_NOREPLACE ...)
:
: , then we could skip the munmap() call upon failure. This
: is a small thing, but it is useful here. (Thanks to Piotr
: Jaroszynski and Mark Hairgrove for helping me get that detail
: exactly right, btw.)
:
: c) After that, CUDA suballocates from p, via:
:
: q = mmap(sub_region_start, ... MAP_FIXED ...)
:
: Interestingly enough, "freeing" is also done via MAP_FIXED, and
: setting PROT_NONE to the subregion. Anyway, I just included (c) for
: general interest.
Atomic address range probing in the multithreaded programs in general
sounds like an interesting thing to me.
The second patch simply replaces MAP_FIXED use in elf loader by
MAP_FIXED_NOREPLACE. I believe other places which rely on MAP_FIXED
should follow. Actually real MAP_FIXED usages should be docummented
properly and they should be more of an exception.
[1] http://lkml.kernel.org/r/20171116101900.13621-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/20171129144219.22867-1-mhocko@kernel.org
[3] http://lkml.kernel.org/r/20171107162217.382cd754@canb.auug.org.au
[4] http://lkml.kernel.org/r/1510048229.12079.7.camel@abdul.in.ibm.com
[5] http://lkml.kernel.org/r/20171023082608.6167-1-mhocko@kernel.org
[6] http://lkml.kernel.org/r/20171113094203.aofz2e7kueitk55y@dhcp22.suse.cz
[7] http://lkml.kernel.org/r/87efp1w7vy.fsf@concordia.ellerman.id.au
This patch (of 2):
MAP_FIXED is used quite often to enforce mapping at the particular range.
The main problem of this flag is, however, that it is inherently dangerous
because it unmaps existing mappings covered by the requested range. This
can cause silent memory corruptions. Some of them even with serious
security implications. While the current semantic might be really
desiderable in many cases there are others which would want to enforce the
given range but rather see a failure than a silent memory corruption on a
clashing range. Please note that there is no guarantee that a given range
is obeyed by the mmap even when it is free - e.g. arch specific code is
allowed to apply an alignment.
Introduce a new MAP_FIXED_NOREPLACE flag for mmap to achieve this
behavior. It has the same semantic as MAP_FIXED wrt. the given address
request with a single exception that it fails with EEXIST if the requested
address is already covered by an existing mapping. We still do rely on
get_unmaped_area to handle all the arch specific MAP_FIXED treatment and
check for a conflicting vma after it returns.
The flag is introduced as a completely new one rather than a MAP_FIXED
extension because of the backward compatibility. We really want a
never-clobber semantic even on older kernels which do not recognize the
flag. Unfortunately mmap sucks wrt. flags evaluation because we do not
EINVAL on unknown flags. On those kernels we would simply use the
traditional hint based semantic so the caller can still get a different
address (which sucks) but at least not silently corrupt an existing
mapping. I do not see a good way around that.
[mpe@ellerman.id.au: fix whitespace]
[fail on clashing range with EEXIST as per Florian Weimer]
[set MAP_FIXED before round_hint_to_min as per Khalid Aziz]
Link: http://lkml.kernel.org/r/20171213092550.2774-2-mhocko@kernel.org
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Evans <jasone@google.com>
Cc: David Goldblatt <davidtgoldblatt@gmail.com>
Cc: Edward Tomasz Napierała <trasz@FreeBSD.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "exec: Pin stack limit during exec".
Attempts to solve problems with the stack limit changing during exec
continue to be frustrated[1][2]. In addition to the specific issues
around the Stack Clash family of flaws, Andy Lutomirski pointed out[3]
other places during exec where the stack limit is used and is assumed to
be unchanging. Given the many places it gets used and the fact that it
can be manipulated/raced via setrlimit() and prlimit(), I think the only
way to handle this is to move away from the "current" view of the stack
limit and instead attach it to the bprm, and plumb this down into the
functions that need to know the stack limits. This series implements
the approach.
[1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()")
[2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"")
[3] to security@kernel.org, "Subject: existing rlimit races?"
This patch (of 3):
Since it is possible that the stack rlimit can change externally during
exec (either via another thread calling setrlimit() or another process
calling prlimit()), provide a way to pass the rlimit down into the
per-architecture mm layout functions so that the rlimit can stay in the
bprm structure instead of sitting in the signal structure until exec is
finalized.
Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kasan_slab_free hook's return value denotes whether the reuse of a
slab object must be delayed (e.g. when the object is put into memory
qurantine).
The current way SLUB handles this hook is by ignoring its return value
and hardcoding checks similar (but not exactly the same) to the ones
performed in kasan_slab_free, which is prone to making mistakes.
The main difference between the hardcoded checks and the ones in
kasan_slab_free is whether we want to perform a free in case when an
invalid-free or a double-free was detected (we don't).
This patch changes the way SLUB handles this by:
1. taking into account the return value of kasan_slab_free for each of
the objects, that are being freed;
2. reconstructing the freelist of objects to exclude the ones, whose
reuse must be delayed.
[andreyknvl@google.com: eliminate unnecessary branch in slab_free]
Link: http://lkml.kernel.org/r/a62759a2545fddf69b0c034547212ca1eb1b3ce2.1520359686.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/083f58501e54731203801d899632d76175868e97.1519400992.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There was a regression report for "mm/cma: manage the memory of the CMA
area by using the ZONE_MOVABLE" [1] and I think that it is related to
this problem. CMA patchset makes the system use one more zone
(ZONE_MOVABLE) and then increases min_free_kbytes. It reduces usable
memory and it could cause regression.
ZONE_MOVABLE only has movable pages so we don't need to keep enough
freepages to avoid or deal with fragmentation. So, don't count it.
This changes min_free_kbytes and thus min_watermark greatly if
ZONE_MOVABLE is used. It will make the user uses more memory.
System:
22GB ram, fakenuma, 2 nodes. 5 zones are used.
Before:
min_free_kbytes: 112640
zone_info (min_watermark):
Node 0, zone DMA
min 19
Node 0, zone DMA32
min 3778
Node 0, zone Normal
min 10191
Node 0, zone Movable
min 0
Node 0, zone Device
min 0
Node 1, zone DMA
min 0
Node 1, zone DMA32
min 0
Node 1, zone Normal
min 14043
Node 1, zone Movable
min 127
Node 1, zone Device
min 0
After:
min_free_kbytes: 90112
zone_info (min_watermark):
Node 0, zone DMA
min 15
Node 0, zone DMA32
min 3022
Node 0, zone Normal
min 8152
Node 0, zone Movable
min 0
Node 0, zone Device
min 0
Node 1, zone DMA
min 0
Node 1, zone DMA32
min 0
Node 1, zone Normal
min 11234
Node 1, zone Movable
min 102
Node 1, zone Device
min 0
[1] (lkml.kernel.org/r/20180102063528.GG30397%20()%20yexl-desktop)
Link: http://lkml.kernel.org/r/1522913236-15776-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now, all reserved pages for CMA region are belong to the ZONE_MOVABLE
and it only serves for a request with GFP_HIGHMEM && GFP_MOVABLE.
Therefore, we don't need to maintain ALLOC_CMA at all.
Link: http://lkml.kernel.org/r/1512114786-5085-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/cma: manage the memory of the CMA area by using the
ZONE_MOVABLE", v2.
0. History
This patchset is the follow-up of the discussion about the "Introduce
ZONE_CMA (v7)" [1]. Please reference it if more information is needed.
1. What does this patch do?
This patch changes the management way for the memory of the CMA area in
the MM subsystem. Currently the memory of the CMA area is managed by
the zone where their pfn is belong to. However, this approach has some
problems since MM subsystem doesn't have enough logic to handle the
situation that different characteristic memories are in a single zone.
To solve this issue, this patch try to manage all the memory of the CMA
area by using the MOVABLE zone. In MM subsystem's point of view,
characteristic of the memory on the MOVABLE zone and the memory of the
CMA area are the same. So, managing the memory of the CMA area by using
the MOVABLE zone will not have any problem.
2. Motivation
There are some problems with current approach. See following. Although
these problem would not be inherent and it could be fixed without this
conception change, it requires many hooks addition in various code path
and it would be intrusive to core MM and would be really error-prone.
Therefore, I try to solve them with this new approach. Anyway,
following is the problems of the current implementation.
o CMA memory utilization
First, following is the freepage calculation logic in MM.
- For movable allocation: freepage = total freepage
- For unmovable allocation: freepage = total freepage - CMA freepage
Freepages on the CMA area is used after the normal freepages in the zone
where the memory of the CMA area is belong to are exhausted. At that
moment that the number of the normal freepages is zero, so
- For movable allocation: freepage = total freepage = CMA freepage
- For unmovable allocation: freepage = 0
If unmovable allocation comes at this moment, allocation request would
fail to pass the watermark check and reclaim is started. After reclaim,
there would exist the normal freepages so freepages on the CMA areas
would not be used.
FYI, there is another attempt [2] trying to solve this problem in lkml.
And, as far as I know, Qualcomm also has out-of-tree solution for this
problem.
Useless reclaim:
There is no logic to distinguish CMA pages in the reclaim path. Hence,
CMA page is reclaimed even if the system just needs the page that can be
usable for the kernel allocation.
Atomic allocation failure:
This is also related to the fallback allocation policy for the memory of
the CMA area. Consider the situation that the number of the normal
freepages is *zero* since the bunch of the movable allocation requests
come. Kswapd would not be woken up due to following freepage
calculation logic.
- For movable allocation: freepage = total freepage = CMA freepage
If atomic unmovable allocation request comes at this moment, it would
fails due to following logic.
- For unmovable allocation: freepage = total freepage - CMA freepage = 0
It was reported by Aneesh [3].
Useless compaction:
Usual high-order allocation request is unmovable allocation request and
it cannot be served from the memory of the CMA area. In compaction,
migration scanner try to migrate the page in the CMA area and make
high-order page there. As mentioned above, it cannot be usable for the
unmovable allocation request so it's just waste.
3. Current approach and new approach
Current approach is that the memory of the CMA area is managed by the
zone where their pfn is belong to. However, these memory should be
distinguishable since they have a strong limitation. So, they are
marked as MIGRATE_CMA in pageblock flag and handled specially. However,
as mentioned in section 2, the MM subsystem doesn't have enough logic to
deal with this special pageblock so many problems raised.
New approach is that the memory of the CMA area is managed by the
MOVABLE zone. MM already have enough logic to deal with special zone
like as HIGHMEM and MOVABLE zone. So, managing the memory of the CMA
area by the MOVABLE zone just naturally work well because constraints
for the memory of the CMA area that the memory should always be
migratable is the same with the constraint for the MOVABLE zone.
There is one side-effect for the usability of the memory of the CMA
area. The use of MOVABLE zone is only allowed for a request with
GFP_HIGHMEM && GFP_MOVABLE so now the memory of the CMA area is also
only allowed for this gfp flag. Before this patchset, a request with
GFP_MOVABLE can use them. IMO, It would not be a big issue since most
of GFP_MOVABLE request also has GFP_HIGHMEM flag. For example, file
cache page and anonymous page. However, file cache page for blockdev
file is an exception. Request for it has no GFP_HIGHMEM flag. There is
pros and cons on this exception. In my experience, blockdev file cache
pages are one of the top reason that causes cma_alloc() to fail
temporarily. So, we can get more guarantee of cma_alloc() success by
discarding this case.
Note that there is no change in admin POV since this patchset is just
for internal implementation change in MM subsystem. Just one minor
difference for admin is that the memory stat for CMA area will be
printed in the MOVABLE zone. That's all.
4. Result
Following is the experimental result related to utilization problem.
8 CPUs, 1024 MB, VIRTUAL MACHINE
make -j16
<Before>
CMA area: 0 MB 512 MB
Elapsed-time: 92.4 186.5
pswpin: 82 18647
pswpout: 160 69839
<After>
CMA : 0 MB 512 MB
Elapsed-time: 93.1 93.4
pswpin: 84 46
pswpout: 183 92
akpm: "kernel test robot" reported a 26% improvement in
vm-scalability.throughput:
http://lkml.kernel.org/r/20180330012721.GA3845@yexl-desktop
[1]: lkml.kernel.org/r/1491880640-9944-1-git-send-email-iamjoonsoo.kim@lge.com
[2]: https://lkml.org/lkml/2014/10/15/623
[3]: http://www.spinics.net/lists/linux-mm/msg100562.html
Link: http://lkml.kernel.org/r/1512114786-5085-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that
important to reserve. When ZONE_MOVABLE is used, this problem would
theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE
allocation request which is mainly used for page cache and anon page
allocation. So, fix it by setting 0 to
sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM].
And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size
makes code complex. For example, if there is highmem system, following
reserve ratio is activated for *NORMAL ZONE* which would be easyily
misleading people.
#ifdef CONFIG_HIGHMEM
32
#endif
This patch also fixes this situation by defining
sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to
right place.
Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
THP migration is hacked into the generic migration with rather
surprising semantic. The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate. unmap_and_move then
fixes that up by spliting the THP into small pages while moving the head
page to the newly allocated order-0 page. Remaning pages are moved to
the LRU list by split_huge_page. The same happens if the THP allocation
fails. This is really ugly and error prone [1].
I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated. Some callers will just work
around that by retrying (e.g. memory hotplug). There are other pfn
walkers which are simply broken though. e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior. Page compaction doesn't try to migrate large
pages so it should be immune.
This patch tries to unclutter the situation by moving the special THP
handling up to the migrate_pages layer where it actually belongs. We
simply split the THP page into the existing list if unmap_and_move fails
with ENOMEM and retry. So we will _always_ migrate all THP subpages and
specific migrate_pages users do not have to deal with this case in a
special way.
[1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com
Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No allocation callback is using this argument anymore. new_page_node
used to use this parameter to convey node_id resp. migration error up
to move_pages code (do_move_page_to_node_array). The error status never
made it into the final status field and we have a better way to
communicate node id to the status field now. All other allocation
callbacks simply ignored the argument so we can drop it finally.
[mhocko@suse.com: fix migration callback]
Link: http://lkml.kernel.org/r/20180105085259.GH2801@dhcp22.suse.cz
[akpm@linux-foundation.org: fix alloc_misplaced_dst_page()]
[mhocko@kernel.org: fix build]
Link: http://lkml.kernel.org/r/20180103091134.GB11319@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20180103082555.14592-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "unclutter thp migration"
Motivation:
THP migration is hacked into the generic migration with rather
surprising semantic. The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate. unmap_and_move then
fixes that up by splitting the THP into small pages while moving the
head page to the newly allocated order-0 page. Remaining pages are
moved to the LRU list by split_huge_page. The same happens if the THP
allocation fails. This is really ugly and error prone [2].
I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated. Some callers will just work
around that by retrying (e.g. memory hotplug). There are other pfn
walkers which are simply broken though. e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior. Page compaction doesn't try to migrate large
pages so it should be immune.
The first patch reworks do_pages_move which relies on a very ugly
calling semantic when the return status is pushed to the migration path
via private pointer. It uses pre allocated fixed size batching to
achieve that. We simply cannot do the same if a THP is to be split
during the migration path which is done in the patch 3. Patch 2 is
follow up cleanup which removes the mentioned return status calling
convention ugliness.
On a side note:
There are some semantic issues I have encountered on the way when
working on patch 1 but I am not addressing them here. E.g. trying to
move THP tail pages will result in either success or EBUSY (the later
one more likely once we isolate head from the LRU list). Hugetlb
reports EACCESS on tail pages. Some errors are reported via status
parameter but migration failures are not even though the original
`reason' argument suggests there was an intention to do so. From a
quick look into git history this never worked. I have tried to keep the
semantic unchanged.
Then there is a relatively minor thing that the page isolation might
fail because of pages not being on the LRU - e.g. because they are
sitting on the per-cpu LRU caches. Easily fixable.
This patch (of 3):
do_pages_move is supposed to move user defined memory (an array of
addresses) to the user defined numa nodes (an array of nodes one for
each address). The user provided status array then contains resulting
numa node for each address or an error. The semantic of this function
is little bit confusing because only some errors are reported back.
Notably migrate_pages error is only reported via the return value. This
patch doesn't try to address these semantic nuances but rather change
the underlying implementation.
Currently we are processing user input (which can be really large) in
batches which are stored to a temporarily allocated page. Each address
is resolved to its struct page and stored to page_to_node structure
along with the requested target numa node. The array of these
structures is then conveyed down the page migration path via private
argument. new_page_node then finds the corresponding structure and
allocates the proper target page.
What is the problem with the current implementation and why to change
it? Apart from being quite ugly it also doesn't cope with unexpected
pages showing up on the migration list inside migrate_pages path. That
doesn't happen currently but the follow up patch would like to make the
thp migration code more clear and that would need to split a THP into
the list for some cases.
How does the new implementation work? Well, instead of batching into a
fixed size array we simply batch all pages that should be migrated to
the same node and isolate all of them into a linked list which doesn't
require any additional storage. This should work reasonably well
because page migration usually migrates larger ranges of memory to a
specific node. So the common case should work equally well as the
current implementation. Even if somebody constructs an input where the
target numa nodes would be interleaved we shouldn't see a large
performance impact because page migration alone doesn't really benefit
from batching. mmap_sem batching for the lookup is quite questionable
and isolate_lru_page which would benefit from batching is not using it
even in the current implementation.
Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pointer swap_avail_heads is local to the source and does not need to
be in global scope, so make it static.
Cleans up sparse warning:
mm/swapfile.c:88:19: warning: symbol 'swap_avail_heads' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20180206215836.12366-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot has triggered a NULL ptr dereference when allocation fault
injection enforces a failure and alloc_mem_cgroup_per_node_info
initializes memcg->nodeinfo only half way through.
But __mem_cgroup_free still tries to free all per-node data and
dereferences pn->lruvec_stat_cpu unconditioanlly even if the specific
per-node data hasn't been initialized.
The bug is quite unlikely to hit because small allocations do not fail
and we would need quite some numa nodes to make struct
mem_cgroup_per_node large enough to cross the costly order.
Link: http://lkml.kernel.org/r/20180406100906.17790-1-mhocko@kernel.org
Reported-by: syzbot+8a5de3cce7cdc70e9ebe@syzkaller.appspotmail.com
Fixes: 00f3ca2c2d66 ("mm: memcontrol: per-lruvec stats infrastructure")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Calling swapon() on a zero length swap file on SSD can lead to a
divide-by-zero.
Although creating such files isn't possible with mkswap and they woud be
considered invalid, it would be better for the swapon code to be more
robust and handle this condition gracefully (return -EINVAL).
Especially since the fix is small and straightforward.
To help with wear leveling on SSD, the swapon syscall calculates a
random position in the swap file using modulo p->highest_bit, which is
set to maxpages - 1 in read_swap_header.
If the swap file is zero length, read_swap_header sets maxpages=1 and
last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we
modulo p->highest_bit in swapon syscall.
This can be prevented by having read_swap_header return zero if
last_page is zero.
Link: http://lkml.kernel.org/r/5AC747C1020000A7001FA82C@prv-mh.provo.novell.com
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reported-by: <Mark.Landis@Teradata.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.
For memory.stat this is acceptable. But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.
Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.
This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters. That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.
[hannes@cmpxchg.org: "array subscript is above array bounds"]
Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When using KSM with use_zero_pages, we replace anonymous pages
containing only zeroes with actual zero pages, which are not anonymous.
We need to do proper accounting of the mm counters, otherwise we will
get wrong values in /proc and a BUG message in dmesg when tearing down
the mm.
Link: http://lkml.kernel.org/r/1522931274-15552-1-git-send-email-imbrenda@linux.vnet.ibm.com
Fixes: e86c59b1b1 ("mm/ksm: improve deduplication of zero pages with colouring")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have a perfectly good macro to determine whether the gfp flags allow
you to sleep or not; use it instead of trying to infer it.
Link: http://lkml.kernel.org/r/20180408062206.GC16007@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In z3fold_create_pool(), the memory allocated by __alloc_percpu() is not
released on the error path that pool->compact_wq , which holds the
return value of create_singlethread_workqueue(), is NULL. This will
result in a memory leak bug.
[akpm@linux-foundation.org: fix oops on kzalloc() failure, check __alloc_percpu() retval]
Link: http://lkml.kernel.org/r/1522803111-29209-1-git-send-email-wangxidong_97@163.com
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A THP memcg charge can trigger the oom killer since 2516035499b9 ("mm,
thp: remove __GFP_NORETRY from khugepaged and madvised allocations").
We have used an explicit __GFP_NORETRY previously which ruled the OOM
killer automagically.
Memcg charge path should be semantically compliant with the allocation
path and that means that if we do not trigger the OOM killer for costly
orders which should do the same in the memcg charge path as well.
Otherwise we are forcing callers to distinguish the two and use
different gfp masks which is both non-intuitive and bug prone. As soon
as we get a costly high order kmalloc user we even do not have any means
to tell the memcg specific gfp mask to prevent from OOM because the
charging is deep within guts of the slab allocator.
The unexpected memcg OOM on THP has already been fixed upstream by
9d3c3354bb85 ("mm, thp: do not cause memcg oom for thp") but this is a
one-off fix rather than a generic solution. Teach mem_cgroup_oom to
bail out on costly order requests to fix the THP issue as well as any
other costly OOM eligible allocations to be added in future.
Also revert 9d3c3354bb85 because special gfp for THP is no longer
needed.
Link: http://lkml.kernel.org/r/20180403193129.22146-1-mhocko@kernel.org
Fixes: 2516035499b9 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use of pte_write(pte) is only valid for present pte, the common code
which set the migration entry can be reach for both valid present pte
and special swap entry (for device memory). Fix the code to use the
mpfn value which properly handle both cases.
On x86 this did not have any bad side effect because pte write bit is
below PAGE_BIT_GLOBAL and thus special swap entry have it set to 0 which
in turn means we were always creating read only special migration entry.
So once migration did finish we always write protected the CPU page
table entry (moreover this is only an issue when migrating from device
memory to system memory). End effect is that CPU write access would
fault again and restore write permission.
This behaviour isn't too bad; it just burns CPU cycles by forcing CPU to
take a second fault on write access. ie, double faulting the same
address. There is no corruption or incorrect states (it behaves as a
COWed page from a fork with a mapcount of 1).
Link: http://lkml.kernel.org/r/20180402023506.12180-1-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
change_pte_range is called from task work context to mark PTEs for
receiving NUMA faulting hints. If the marked pages are dirty then
migration may fail. Some filesystems cannot migrate dirty pages without
blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU.
Even when they can, it can be a waste of cycles when the pages are
shared forcing higher scan rates. This patch avoids marking shared
dirty pages for hinting faults but also will skip a migration if the
page was dirtied after the scanner updated a clean page.
This is most noticeable running the NASA Parallel Benchmark when backed
by btrfs, the default root filesystem for some distributions, but also
noticeable when using XFS.
The following are results from a 4-socket machine running a 4.16-rc4
kernel with some scheduler patches that are pending for the next merge
window.
4.16.0-rc4 4.16.0-rc4
schedtip-20180309 nodirty-v1
Time cg.D 459.07 ( 0.00%) 444.21 ( 3.24%)
Time ep.D 76.96 ( 0.00%) 77.69 ( -0.95%)
Time is.D 25.55 ( 0.00%) 27.85 ( -9.00%)
Time lu.D 601.58 ( 0.00%) 596.87 ( 0.78%)
Time mg.D 107.73 ( 0.00%) 108.22 ( -0.45%)
is.D regresses slightly in terms of absolute time but note that that
particular load varies quite a bit from run to run. The more relevant
observation is the total system CPU usage.
4.16.0-rc4 4.16.0-rc4
schedtip-20180309 nodirty-v1
User 71471.91 70627.04
System 11078.96 8256.13
Elapsed 661.66 632.74
That is a substantial drop in system CPU usage and overall the workload
completes faster. The NUMA balancing statistics are also interesting
NUMA base PTE updates 111407972 139848884
NUMA huge PMD updates 206506 264869
NUMA page range updates 217139044 275461812
NUMA hint faults 4300924 3719784
NUMA hint local faults 3012539 3416618
NUMA hint local percent 70 91
NUMA pages migrated 1517487 1358420
While more PTEs are scanned due to changes in what faults are gathered,
it's clear that a far higher percentage of faults are local as the bulk
of the remote hits were dirty pages that, in this case with btrfs, had
no chance of migrating.
The following is a comparison when using XFS as that is a more realistic
filesystem choice for a data partition
4.16.0-rc4 4.16.0-rc4
schedtip-20180309 nodirty-v1r47
Time cg.D 485.28 ( 0.00%) 442.62 ( 8.79%)
Time ep.D 77.68 ( 0.00%) 77.54 ( 0.18%)
Time is.D 26.44 ( 0.00%) 24.79 ( 6.24%)
Time lu.D 597.46 ( 0.00%) 597.11 ( 0.06%)
Time mg.D 142.65 ( 0.00%) 105.83 ( 25.81%)
That is a reasonable gain on two relatively long-lived workloads. While
not presented, there is also a substantial drop in system CPu usage and
the NUMA balancing stats show similar improvements in locality as btrfs
did.
Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
hmm_devmem_find() requires rcu_read_lock_held() but there's nothing which
actually uses the RCU protection. The only caller is
hmm_devmem_pages_create() which already grabs the mutex and does
superfluous rcu_read_lock/unlock() around the function.
This doesn't add anything and just adds to confusion. Remove the RCU
protection and open-code the radix tree lookup. If this needs to become
more sophisticated in the future, let's add them back when necessary.
Link: http://lkml.kernel.org/r/20180314194515.1661824-4-tj@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Users of hmm_vma_fault() and hmm_vma_get_pfns() provide a flags array and
pfn shift value allowing them to define their own encoding for HMM pfn
that are fill inside the pfns array of the hmm_range struct. With this
device driver can get pfn that match their own private encoding out of HMM
without having to do any conversion.
[rcampbell@nvidia.com: don't ignore specific pte fault flag in hmm_vma_fault()]
Link: http://lkml.kernel.org/r/20180326213009.2460-2-jglisse@redhat.com
[rcampbell@nvidia.com: clarify fault logic for device private memory]
Link: http://lkml.kernel.org/r/20180326213009.2460-3-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20180323005527.758-16-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This changes hmm_vma_fault() to not take a global write fault flag for a
range but instead rely on caller to populate HMM pfns array with proper
fault flag ie HMM_PFN_VALID if driver want read fault for that address or
HMM_PFN_VALID and HMM_PFN_WRITE for write.
Moreover by setting HMM_PFN_DEVICE_PRIVATE the device driver can ask for
device private memory to be migrated back to system memory through page
fault.
This is more flexible API and it better reflects how device handles and
reports fault.
Link: http://lkml.kernel.org/r/20180323005527.758-15-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No functional change, just create one function to handle pmd and one to
handle pte (hmm_vma_handle_pmd() and hmm_vma_handle_pte()).
Link: http://lkml.kernel.org/r/20180323005527.758-14-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move hmm_pfns_clear() closer to where it is used to make it clear it is
not use by page table walkers.
Link: http://lkml.kernel.org/r/20180323005527.758-13-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make naming consistent across code, DEVICE_PRIVATE is the name use outside
HMM code so use that one.
Link: http://lkml.kernel.org/r/20180323005527.758-12-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no point in differentiating between a range for which there is
not even a directory (and thus entries) and empty entry (pte_none() or
pmd_none() returns true).
Simply drop the distinction ie remove HMM_PFN_EMPTY flag and merge now
duplicate hmm_vma_walk_hole() and hmm_vma_walk_clear() functions.
Link: http://lkml.kernel.org/r/20180323005527.758-11-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Special vma (one with any of the VM_SPECIAL flags) can not be access by
device because there is no consistent model across device drivers on those
vma and their backing memory.
This patch directly use hmm_range struct for hmm_pfns_special() argument
as it is always affecting the whole vma and thus the whole range.
It also make behavior consistent after this patch both hmm_vma_fault() and
hmm_vma_get_pfns() returns -EINVAL when facing such vma. Previously
hmm_vma_fault() returned 0 and hmm_vma_get_pfns() return -EINVAL but both
were filling the HMM pfn array with special entry.
Link: http://lkml.kernel.org/r/20180323005527.758-10-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All device driver we care about are using 64bits page table entry. In
order to match this and to avoid useless define convert all HMM pfn to
directly use uint64_t. It is a first step on the road to allow driver to
directly use pfn value return by HMM (saving memory and CPU cycles use for
conversion between the two).
Link: http://lkml.kernel.org/r/20180323005527.758-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Only peculiar architecture allow write without read thus assume that any
valid pfn do allow for read. Note we do not care for write only because
it does make sense with thing like atomic compare and exchange or any
other operations that allow you to get the memory value through them.
Link: http://lkml.kernel.org/r/20180323005527.758-8-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both hmm_vma_fault() and hmm_vma_get_pfns() were taking a hmm_range struct
as parameter and were initializing that struct with others of their
parameters. Have caller of those function do this as they are likely to
already do and only pass this struct to both function this shorten
function signature and make it easier in the future to add new parameters
by simply adding them to the structure.
Link: http://lkml.kernel.org/r/20180323005527.758-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The private field of mm_walk struct point to an hmm_vma_walk struct and
not to the hmm_range struct desired. Fix to get proper struct pointer.
Link: http://lkml.kernel.org/r/20180323005527.758-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Linus Torvalds
Tetsuo Handa
Dave Hansen
Matthew Wilcox
Minchan Kim
Naoya Horiguchi
Greg Thelen
Michal Hocko
Vlastimil Babka
Arnd Bergmann
Michael S. Tsirkin
Pavel Tatashin
Kees Cook
Andrey Konovalov
Joonsoo Kim
Colin Ian King
Tom Abraham
Johannes Weiner
Claudio Imbrenda
Xidong Wang
Ralph Campbell
Mel Gorman
Tejun Heo
Jérôme Glisse