| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory"
These are all cleanups and one fix previously sent as part of [1]:
[PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory
groups.
These patches make sense even without the other series, therefore I pulled
them out to make the other series easier to digest.
[1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com
This patch (of 4):
Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.
As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.
Use "unsigned long" instead, just as we do in other places when handling
PFNs. This can bite us once we have physical addresses in the range of
multiple TB.
Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com
Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When test_pages_in_a_zone() used pfn_valid_within() is has some logic
surrounding pfn_valid_within() checks.
Since pfn_valid_within() is gone, this logic can be removed.
Link: https://lkml.kernel.org/r/20210713080035.7464-3-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE".
After recent updates to freeing unused parts of the memory map, no
architecture can have holes in the memory map within a pageblock. This
makes pfn_valid_within() check and CONFIG_HOLES_IN_ZONE configuration
option redundant.
The first patch removes them both in a mechanical way and the second patch
simplifies memory_hotplug::test_pages_in_a_zone() that had
pfn_valid_within() surrounded by more logic than simple if.
This patch (of 2):
After recent changes in freeing of the unused parts of the memory map and
rework of pfn_valid() in arm and arm64 there are no architectures that can
have holes in the memory map within a pageblock and so nothing can enable
CONFIG_HOLES_IN_ZONE which guards non trivial implementation of
pfn_valid_within().
With that, pfn_valid_within() is always hardwired to 1 and can be
completely removed.
Remove calls to pfn_valid_within() and CONFIG_HOLES_IN_ZONE.
Link: https://lkml.kernel.org/r/20210713080035.7464-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20210713080035.7464-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 9857a17f206ff374aea78bccfb687f145368be2e.
That commit was completely broken, and I should have caught on to it
earlier. But happily, the kernel test robot noticed the breakage fairly
quickly.
The breakage is because "try_get_page()" is about avoiding the page
reference count overflow case, but is otherwise the exact same as a
plain "get_page()".
In contrast, "try_get_compound_head()" is an entirely different beast,
and uses __page_cache_add_speculative() because it's not just about the
page reference count, but also about possibly racing with the underlying
page going away.
So all the commentary about how
"try_get_page() has fallen a little behind in terms of maintenance,
try_get_compound_head() handles speculative page references more
thoroughly"
was just completely wrong: yes, try_get_compound_head() handles
speculative page references, but the point is that try_get_page() does
not, and must not.
So there's no lack of maintainance - there are fundamentally different
semantics.
A speculative page reference would be entirely wrong in "get_page()",
and it's entirely wrong in "try_get_page()". It's not about
speculation, it's purely about "uhhuh, you can't get this page because
you've tried to increment the reference count too much already".
The reason the kernel test robot noticed this bug was that it hit the
VM_BUG_ON() in __page_cache_add_speculative(), which is all about
verifying that the context of any speculative page access is correct.
But since that isn't what try_get_page() is all about, the VM_BUG_ON()
tests things that are not correct to test for try_get_page().
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull MAP_DENYWRITE removal from David Hildenbrand:
"Remove all in-tree usage of MAP_DENYWRITE from the kernel and remove
VM_DENYWRITE.
There are some (minor) user-visible changes:
- We no longer deny write access to shared libaries loaded via legacy
uselib(); this behavior matches modern user space e.g. dlopen().
- We no longer deny write access to the elf interpreter after exec
completed, treating it just like shared libraries (which it often
is).
- We always deny write access to the file linked via /proc/pid/exe:
sys_prctl(PR_SET_MM_MAP/EXE_FILE) will fail if write access to the
file cannot be denied, and write access to the file will remain
denied until the link is effectivel gone (exec, termination,
sys_prctl(PR_SET_MM_MAP/EXE_FILE)) -- just as if exec'ing the file.
Cross-compiled for a bunch of architectures (alpha, microblaze, i386,
s390x, ...) and verified via ltp that especially the relevant tests
(i.e., creat07 and execve04) continue working as expected"
* tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux:
fs: update documentation of get_write_access() and friends
mm: ignore MAP_DENYWRITE in ksys_mmap_pgoff()
mm: remove VM_DENYWRITE
binfmt: remove in-tree usage of MAP_DENYWRITE
kernel/fork: always deny write access to current MM exe_file
kernel/fork: factor out replacing the current MM exe_file
binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()
|
|
Embed local_lock into struct kmem_cpu_slab and use the irq-safe versions of
local_lock instead of plain local_irq_save/restore. On !PREEMPT_RT that's
equivalent, with better lockdep visibility. On PREEMPT_RT that means better
preemption.
However, the cost on PREEMPT_RT is the loss of lockless fast paths which only
work with cpu freelist. Those are designed to detect and recover from being
preempted by other conflicting operations (both fast or slow path), but the
slow path operations assume they cannot be preempted by a fast path operation,
which is guaranteed naturally with disabled irqs. With local locks on
PREEMPT_RT, the fast paths now also need to take the local lock to avoid races.
In the allocation fastpath slab_alloc_node() we can just defer to the slowpath
__slab_alloc() which also works with cpu freelist, but under the local lock.
In the free fastpath do_slab_free() we have to add a new local lock protected
version of freeing to the cpu freelist, as the existing slowpath only works
with the page freelist.
Also update the comment about locking scheme in SLUB to reflect changes done
by this series.
[ Mike Galbraith <efault@gmx.de>: use local_lock() without irq in PREEMPT_RT
scope; debugging of RT crashes resulting in put_cpu_partial() locking changes ]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
We currently use preempt_disable() (directly or via get_cpu_ptr()) to stabilize
the pointer to kmem_cache_cpu. On PREEMPT_RT this would be incompatible with
the list_lock spinlock. We can use migrate_disable() instead, but that
increases overhead on !PREEMPT_RT as it's an unconditional function call.
In order to get the best available mechanism on both PREEMPT_RT and
!PREEMPT_RT, introduce private slub_get_cpu_ptr() and slub_put_cpu_ptr()
wrappers and use them.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Jann Horn reported [1] the following theoretically possible race:
task A: put_cpu_partial() calls preempt_disable()
task A: oldpage = this_cpu_read(s->cpu_slab->partial)
interrupt: kfree() reaches unfreeze_partials() and discards the page
task B (on another CPU): reallocates page as page cache
task A: reads page->pages and page->pobjects, which are actually
halves of the pointer page->lru.prev
task B (on another CPU): frees page
interrupt: allocates page as SLUB page and places it on the percpu partial list
task A: this_cpu_cmpxchg() succeeds
which would cause page->pages and page->pobjects to end up containing
halves of pointers that would then influence when put_cpu_partial()
happens and show up in root-only sysfs files. Maybe that's acceptable,
I don't know. But there should probably at least be a comment for now
to point out that we're reading union fields of a page that might be
in a completely different state.
Additionally, the this_cpu_cmpxchg() approach in put_cpu_partial() is only safe
against s->cpu_slab->partial manipulation in ___slab_alloc() if the latter
disables irqs, otherwise a __slab_free() in an irq handler could call
put_cpu_partial() in the middle of ___slab_alloc() manipulating ->partial
and corrupt it. This becomes an issue on RT after a local_lock is introduced
in later patch. The fix means taking the local_lock also in put_cpu_partial()
on RT.
After debugging this issue, Mike Galbraith suggested [2] that to avoid
different locking schemes on RT and !RT, we can just protect put_cpu_partial()
with disabled irqs (to be converted to local_lock_irqsave() later) everywhere.
This should be acceptable as it's not a fast path, and moving the actual
partial unfreezing outside of the irq disabled section makes it short, and with
the retry loop gone the code can be also simplified. In addition, the race
reported by Jann should no longer be possible.
[1] https://lore.kernel.org/lkml/CAG48ez1mvUuXwg0YPH5ANzhQLpbphqk-ZS+jbRz+H66fvm4FcA@mail.gmail.com/
[2] https://lore.kernel.org/linux-rt-users/e3470ab357b48bccfbd1f5133b982178a7d2befb.camel@gmx.de/
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
We need to disable irqs around slab_lock() (a bit spinlock) to make it
irq-safe. Most calls to slab_lock() are nested under spin_lock_irqsave() which
doesn't disable irqs on PREEMPT_RT, so add explicit disabling with PREEMPT_RT.
The exception is cmpxchg_double_slab() which already disables irqs, so use a
__slab_[un]lock() variant without irq disable there.
slab_[un]lock() thus needs a flags pointer parameter, which is unused on !RT.
free_debug_processing() now has two flags variables, which looks odd, but only
one is actually used - the one used in spin_lock_irqsave() on !RT and the one
used in slab_lock() on RT.
As a result, __cmpxchg_double_slab() and cmpxchg_double_slab() become
effectively identical on RT, as both will disable irqs, which is necessary on
RT as most callers of this function also rely on irqsaving lock operations.
Thus, assert that irqs are already disabled in __cmpxchg_double_slab() only on
!RT and also change the VM_BUG_ON assertion to the more standard lockdep_assert
one.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The variable object_map is protected by object_map_lock. The lock is always
acquired in debug code and within already atomic context
Make object_map_lock a raw_spinlock_t.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
flush_all() flushes a specific SLAB cache on each CPU (where the cache
is present). The deactivate_slab()/__free_slab() invocation happens
within IPI handler and is problematic for PREEMPT_RT.
The flush operation is not a frequent operation or a hot path. The
per-CPU flush operation can be moved to within a workqueue.
Because a workqueue handler, unlike IPI handler, does not disable irqs,
flush_slab() now has to disable them for working with the kmem_cache_cpu
fields. deactivate_slab() is safe to call with irqs enabled.
[vbabka@suse.cz: adapt to new SLUB changes]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
flush_slab() is called either as part IPI handler on given live cpu, or as a
cleanup on behalf of another cpu that went offline. The first case needs to
protect updating the kmem_cache_cpu fields with disabled irqs. Currently the
whole call happens with irqs disabled by the IPI handler, but the following
patch will change from IPI to workqueue, and flush_slab() will have to disable
irqs (to be replaced with a local lock later) in the critical part.
To prepare for this change, replace the call to flush_slab() for the dead cpu
handling with an opencoded variant that will not disable irqs nor take a local
lock.
Suggested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
slub_cpu_dead() cleans up for an offlined cpu from another cpu and calls only
functions that are now irq safe, so we don't need to disable irqs anymore.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
__unfreeze_partials() no longer needs to have irqs disabled, except for making
the spin_lock operations irq-safe, so convert the spin_locks operations and
remove the separate irq handling.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Unfreezing partial list can be split to two phases - detaching the list from
struct kmem_cache_cpu, and processing the list. The whole operation does not
need to be protected by disabled irqs. Restructure the code to separate the
detaching (with disabled irqs) and unfreezing (with irq disabling to be reduced
in the next patch).
Also, unfreeze_partials() can be called from another cpu on behalf of a cpu
that is being offlined, where disabling irqs on the local cpu has no sense, so
restructure the code as follows:
- __unfreeze_partials() is the bulk of unfreeze_partials() that processes the
detached percpu partial list
- unfreeze_partials() detaches list from current cpu with irqs disabled and
calls __unfreeze_partials()
- unfreeze_partials_cpu() is to be called for the offlined cpu so it needs no
irq disabling, and is called from __flush_cpu_slab()
- flush_cpu_slab() is for the local cpu thus it needs to call
unfreeze_partials(). So it can't simply call
__flush_cpu_slab(smp_processor_id()) anymore and we have to open-code the
proper calls.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Instead of iterating through the live percpu partial list, detach it from the
kmem_cache_cpu at once. This is simpler and will allow further optimization.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
No need for disabled irqs when discarding slabs, so restore them before
discarding.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
unfreeze_partials() can be optimized so that it doesn't need irqs disabled for
the whole time. As the first step, move irq control into the function and
remove it from the put_cpu_partial() caller.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The function is now safe to be called with irqs enabled, so move the calls
outside of irq disabled sections.
When called from ___slab_alloc() -> flush_slab() we have irqs disabled, so to
reenable them before deactivate_slab() we need to open-code flush_slab() in
___slab_alloc() and reenable irqs after modifying the kmem_cache_cpu fields.
But that means a IRQ handler meanwhile might have assigned a new page to
kmem_cache_cpu.page so we have to retry the whole check.
The remaining callers of flush_slab() are the IPI handler which has disabled
irqs anyway, and slub_cpu_dead() which will be dealt with in the following
patch.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
dectivate_slab() now no longer touches the kmem_cache_cpu structure, so it will
be possible to call it with irqs enabled. Just convert the spin_lock calls to
their irq saving/restoring variants to make it irq-safe.
Note we now have to use cmpxchg_double_slab() for irq-safe slab_lock(), because
in some situations we don't take the list_lock, which would disable irqs.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
deactivate_slab() removes the cpu slab by merging the cpu freelist with slab's
freelist and putting the slab on the proper node's list. It also sets the
respective kmem_cache_cpu pointers to NULL.
By extracting the kmem_cache_cpu operations from the function, we can make it
not dependent on disabled irqs.
Also if we return a single free pointer from ___slab_alloc, we no longer have
to assign kmem_cache_cpu.page before deactivation or care if somebody preempted
us and assigned a different page to our kmem_cache_cpu in the process.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The function get_partial() does not need to have irqs disabled as a whole. It's
sufficient to convert spin_lock operations to their irq saving/restoring
versions.
As a result, it's now possible to reach the page allocator from the slab
allocator without disabling and re-enabling interrupts on the way.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Building on top of the previous patch, re-enable irqs before checking new
pages. alloc_debug_processing() is now called with enabled irqs so we need to
remove VM_BUG_ON(!irqs_disabled()); in check_slab() - there doesn't seem to be
a need for it anyway.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
When we obtain a new slab page from node partial list or page allocator, we
assign it to kmem_cache_cpu, perform some checks, and if they fail, we undo
the assignment.
In order to allow doing the checks without irq disabled, restructure the code
so that the checks are done first, and kmem_cache_cpu.page assignment only
after they pass.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
allocate_slab() currently re-enables irqs before calling to the page allocator.
It depends on gfpflags_allow_blocking() to determine if it's safe to do so.
Now we can instead simply restore irq before calling it through new_slab().
The other caller early_kmem_cache_node_alloc() is unaffected by this.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Continue reducing the irq disabled scope. Check for per-cpu partial slabs with
first with irqs enabled and then recheck with irqs disabled before grabbing
the slab page. Mostly preparatory for the following patches.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
As another step of shortening irq disabled sections in ___slab_alloc(), delay
disabling irqs until we pass the initial checks if there is a cached percpu
slab and it's suitable for our allocation.
Now we have to recheck c->page after actually disabling irqs as an allocation
in irq handler might have replaced it.
Because we call pfmemalloc_match() as one of the checks, we might hit
VM_BUG_ON_PAGE(!PageSlab(page)) in PageSlabPfmemalloc in case we get
interrupted and the page is freed. Thus introduce a pfmemalloc_match_unsafe()
variant that lacks the PageSlab check.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
Currently __slab_alloc() disables irqs around the whole ___slab_alloc(). This
includes cases where this is not needed, such as when the allocation ends up in
the page allocator and has to awkwardly enable irqs back based on gfp flags.
Also the whole kmem_cache_alloc_bulk() is executed with irqs disabled even when
it hits the __slab_alloc() slow path, and long periods with disabled interrupts
are undesirable.
As a first step towards reducing irq disabled periods, move irq handling into
___slab_alloc(). Callers will instead prevent the s->cpu_slab percpu pointer
from becoming invalid via get_cpu_ptr(), thus preempt_disable(). This does not
protect against modification by an irq handler, which is still done by disabled
irq for most of ___slab_alloc(). As a small immediate benefit,
slab_out_of_memory() from ___slab_alloc() is now called with irqs enabled.
kmem_cache_alloc_bulk() disables irqs for its fastpath and then re-enables them
before calling ___slab_alloc(), which then disables them at its discretion. The
whole kmem_cache_alloc_bulk() operation also disables preemption.
When ___slab_alloc() calls new_slab() to allocate a new page, re-enable
preemption, because new_slab() will re-enable interrupts in contexts that allow
blocking (this will be improved by later patches).
The patch itself will thus increase overhead a bit due to disabled preemption
(on configs where it matters) and increased disabling/enabling irqs in
kmem_cache_alloc_bulk(), but that will be gradually improved in the following
patches.
Note in __slab_alloc() we need to change the #ifdef CONFIG_PREEMPT guard to
CONFIG_PREEMPT_COUNT to make sure preempt disable/enable is properly paired in
all configurations. On configs without involuntary preemption and debugging
the re-read of kmem_cache_cpu pointer is still compiled out as it was before.
[ Mike Galbraith <efault@gmx.de>: Fix kmem_cache_alloc_bulk() error path ]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In slab_alloc_node() and do_slab_free() fastpaths we need to guarantee that
our kmem_cache_cpu pointer is from the same cpu as the tid value. Currently
that's done by reading the tid first using this_cpu_read(), then the
kmem_cache_cpu pointer and verifying we read the same tid using the pointer and
plain READ_ONCE().
This can be simplified to just fetching kmem_cache_cpu pointer and then reading
tid using the pointer. That guarantees they are from the same cpu. We don't
need to read the tid using this_cpu_read() because the value will be validated
by this_cpu_cmpxchg_double(), making sure we are on the correct cpu and the
freelist didn't change by anyone preempting us since reading the tid.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
When we allocate slab object from a newly acquired page (from node's partial
list or page allocator), we usually also retain the page as a new percpu slab.
There are two exceptions - when pfmemalloc status of the page doesn't match our
gfp flags, or when the cache has debugging enabled.
The current code for these decisions is not easy to follow, so restructure it
and add comments. The new structure will also help with the following changes.
No functional change.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
The function get_partial() finds a suitable page on a partial list, acquires
and returns its freelist and assigns the page pointer to kmem_cache_cpu.
In later patch we will need more control over the kmem_cache_cpu.page
assignment, so instead of passing a kmem_cache_cpu pointer, pass a pointer to a
pointer to a page that get_partial() can fill and the caller can assign the
kmem_cache_cpu.page pointer. No functional change as all of this still happens
with disabled IRQs.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The later patches will need more fine grained control over individual actions
in ___slab_alloc(), the only caller of new_slab_objects(), so dissolve it
there. This is a preparatory step with no functional change.
The only minor change is moving WARN_ON_ONCE() for using a constructor together
with __GFP_ZERO to new_slab(), which makes it somewhat less frequent, but still
able to catch a development change introducing a systematic misuse.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
The later patches will need more fine grained control over individual actions
in ___slab_alloc(), the only caller of new_slab_objects(), so this is a first
preparatory step with no functional change.
This adds a goto label that appears unnecessary at this point, but will be
useful for later changes.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
|
|
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
|
|
Commit d6e0b7fa1186 ("slub: make dead caches discard free slabs immediately")
introduced cpu partial flushing for kmemcg caches, based on setting the target
cpu_partial to 0 and adding a flushing check in put_cpu_partial().
This code that sets cpu_partial to 0 was later moved by c9fc586403e7 ("slab:
introduce __kmemcg_cache_deactivate()") and ultimately removed by 9855609bde03
("mm: memcg/slab: use a single set of kmem_caches for all accounted
allocations"). However the check and flush in put_cpu_partial() was never
removed, although it's effectively a dead code. So this patch removes it.
Note that d6e0b7fa1186 also added preempt_disable()/enable() to
unfreeze_partials() which could be thus also considered unnecessary. But
further patches will rely on it, so keep it.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In slab_free_hook() we disable irqs around the debug_check_no_locks_freed()
call, which is unnecessary, as irqs are already being disabled inside the call.
This seems to be leftover from the past where there were more calls inside the
irq disabled sections. Remove the irq disable/enable operations.
Mel noted:
> Looks like it was needed for kmemcheck which went away back in 4.15
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
validate_slab_cache() is called either to handle a sysfs write, or from a
self-test context. In both situations it's straightforward to preallocate a
private object bitmap instead of grabbing the shared static one meant for
critical sections, so let's do that.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
Slub has a static spinlock protected bitmap for marking which objects are on
freelist when it wants to list them, for situations where dynamically
allocating such map can lead to recursion or locking issues, and on-stack
bitmap would be too large.
The handlers of debugfs files alloc_traces and free_traces also currently use this
shared bitmap, but their syscall context makes it straightforward to allocate a
private map before entering locked sections, so switch these processing paths
to use a private bitmap.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
|
|
slab_debug_trace_open() can only be called on caches with SLAB_STORE_USER flag
and as with all slub debugging flags, such caches avoid cpu or percpu partial
slabs altogether, so there's nothing to flush.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
There is a usecase in Android that an app process's memory is swapped out
by process_madvise() with MADV_PAGEOUT, such as the memory is swapped to
zram or a backing device. When the process is scheduled to running, like
switch to foreground, multiple page faults may cause the app dropped
frames.
To reduce the problem, System Management Software can read-ahead memory
of the process immediately when the app switches to forground. Calling
process_madvise() with MADV_WILLNEED can meet this need.
Link: https://lkml.kernel.org/r/20210804082010.12482-1-zhangkui@oppo.com
Signed-off-by: zhangkui <zhangkui@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return value of pagetypeinfo_showfree and pagetypeinfo_showblockcount
are unused now. Remove them.
Link: https://lkml.kernel.org/r/20210715122911.15700-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can replace the array_num * sizeof(array[0]) with sizeof(array) to
simplify the code.
Link: https://lkml.kernel.org/r/20210715122911.15700-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Cleanup for vmstat".
This series contains cleanups to remove unneeded return value, correct
wrong comment and simplify the array size calculation. More details can
be found in the respective changelogs.
This patch (of 3):
Correct wrong fls(mem+1) to fls(mem)+1 and remove the duplicated comment
with quiet_vmstat().
Link: https://lkml.kernel.org/r/20210715122911.15700-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210715122911.15700-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b239f7daf553 ("percpu: set PCPU_BITMAP_BLOCK_SIZE to PAGE_SIZE")
removed the parameter 'for_alloc', so remove this comment.
Link: https://lkml.kernel.org/r/1630576043-21367-1-git-send-email-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ksm_stable_node_chains_prune_millisecs is declared as int, but in
stable__node_chains_prune_millisecs_store(), it can store values up to
UINT_MAX. Change its type to unsigned int.
Link: https://lkml.kernel.org/r/20210806111351.GA71845@asus
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the expected "Return:" format to prevent a kernel-doc warning.
mm/migrate.c:1157: warning: Excess function parameter 'returns' description in 'next_demotion_node'
Link: https://lkml.kernel.org/r/20210808203151.10632-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In modern systems it's not unusual to have a system component monitoring
memory conditions of the system and tasked with keeping system memory
pressure under control. One way to accomplish that is to kill
non-essential processes to free up memory for more important ones.
Examples of this are Facebook's OOM killer daemon called oomd and
Android's low memory killer daemon called lmkd.
For such system component it's important to be able to free memory quickly
and efficiently. Unfortunately the time process takes to free up its
memory after receiving a SIGKILL might vary based on the state of the
process (uninterruptible sleep), size and OPP level of the core the
process is running. A mechanism to free resources of the target process
in a more predictable way would improve system's ability to control its
memory pressure.
Introduce process_mrelease system call that releases memory of a dying
process from the context of the caller. This way the memory is freed in a
more controllable way with CPU affinity and priority of the caller. The
workload of freeing the memory will also be charged to the caller. The
operation is allowed only on a dying process.
After previous discussions [1, 2, 3] the decision was made [4] to
introduce a dedicated system call to cover this use case.
The API is as follows,
int process_mrelease(int pidfd, unsigned int flags);
DESCRIPTION
The process_mrelease() system call is used to free the memory of
an exiting process.
The pidfd selects the process referred to by the PID file
descriptor.
(See pidfd_open(2) for further information)
The flags argument is reserved for future use; currently, this
argument must be specified as 0.
RETURN VALUE
On success, process_mrelease() returns 0. On error, -1 is
returned and errno is set to indicate the error.
ERRORS
EBADF pidfd is not a valid PID file descriptor.
EAGAIN Failed to release part of the address space.
EINTR The call was interrupted by a signal; see signal(7).
EINVAL flags is not 0.
EINVAL The memory of the task cannot be released because the
process is not exiting, the address space is shared
with another live process or there is a core dump in
progress.
ENOSYS This system call is not supported, for example, without
MMU support built into Linux.
ESRCH The target process does not exist (i.e., it has terminated
and been waited on).
[1] https://lore.kernel.org/lkml/20190411014353.113252-3-surenb@google.com/
[2] https://lore.kernel.org/linux-api/20201113173448.1863419-1-surenb@google.com/
[3] https://lore.kernel.org/linux-api/20201124053943.1684874-3-surenb@google.com/
[4] https://lore.kernel.org/linux-api/20201223075712.GA4719@lst.de/
Link: https://lkml.kernel.org/r/20210809185259.405936-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a lot of uses of memblock_find_in_range() along with
memblock_reserve() from the times memblock allocation APIs did not exist.
memblock_find_in_range() is the very core of memblock allocations, so any
future changes to its internal behaviour would mandate updates of all the
users outside memblock.
Replace the calls to memblock_find_in_range() with an equivalent calls to
memblock_phys_alloc() and memblock_phys_alloc_range() and make
memblock_find_in_range() private method of memblock.
This simplifies the callers, ensures that (unlikely) errors in
memblock_reserve() are handled and improves maintainability of
memblock_find_in_range().
Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv]
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Obsoleted in_intrrupt() include task context with disabled BH, it's better
to use in_task() instead.
Link: https://lkml.kernel.org/r/984ee771-4834-21da-801f-c15c18ddf4d1@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
David Hildenbrand
Mike Rapoport
Linus Torvalds
Vlastimil Babka
Sebastian Andrzej Siewior
zhangkui
Miaohe Lin
Jing Xiangfeng
Zhansaya Bagdauletkyzy
Randy Dunlap
Suren Baghdasaryan
Vasily Averin