aboutsummaryrefslogtreecommitdiffstats
path: root/net/atm/mpoa_proc.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2008-09-22Phonet: common socket glueRemi Denis-Courmont5-3/+363
This provides the socket API for the Phonet protocols family. Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22Phonet: Netlink interfaceRemi Denis-Courmont4-0/+189
This provides support for configuring Phonet addresses, notifying Phonet configuration changes, and dumping the configuration. Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22Phonet: network device and address handlingRemi Denis-Courmont4-0/+262
This provides support for adding Phonet addresses to and removing Phonet addresses from network devices. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22Phonet: add CONFIG_PHONETRemi Denis-Courmont4-0/+22
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22Phonet: PF_PHONET protocol family supportRemi Denis-Courmont2-0/+290
This is the basis for the Phonet protocol families, and introduces the ETH_P_PHONET packet type and the PF_PHONET socket family. Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22Phonet: global definitionsRemi Denis-Courmont6-4/+153
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22ipsec: Fix xfrm_state_walk raceHerbert Xu3-17/+34
As discovered by Timo Teräs, the currently xfrm_state_walk scheme is racy because if a second dump finishes before the first, we may free xfrm states that the first dump would walk over later. This patch fixes this by storing the dumps in a list in order to calculate the correct completion counter which cures this problem. I've expanded netlink_cb in order to accomodate the extra state related to this. It shouldn't be a big deal since netlink_cb is kmalloced for each dump and we're just increasing it by 4 or 8 bytes. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22cassini: use request_firmwareJaswinder Singh5-1523/+207
Firmware blob looks like this... __le16 load_address unsigned char data[] [akpm@linux-foundation.org: include vmalloc.h] Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22net/atm/lec.c: drop code after returnJulia Lawall1-1/+0
The break after the return serves no purpose. Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22drivers/net/wan: Use DIV_ROUND_UPJulia Lawall1-1/+1
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22drivers/atm: Use DIV_ROUND_UPJulia Lawall3-8/+8
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22hci_usb: replace mb with smp_mbMing Lei1-5/+5
smp_mb is enough for ordering memory operations among processors,and mb is more expensive than smp_mb for UP machine, so replace it with smp_mb(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22net: em_cmp.c use unaligned access helpersHarvey Harrison1-6/+3
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22irda: follow lspci device/vendor styleBjorn Helgaas1-1/+1
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22mISDN: misc timerdev fixesAndi Kleen1-16/+6
- Remove noop VFS stubs. The VFS does that on a NULL pointer anyways. - Fix timer handler prototype to be correct - Comment ugly SMP race I didn't fix. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22mISDN: annotate iomem pointer and add staticsHarvey Harrison1-7/+7
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22mISDN: endian annotations for struct ztHarvey Harrison2-7/+6
Found two possible bugs where the z1 value was used directly without byteswapping. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22drivers/isdn/capi/kcapi.c: Adjust error handling code involving capi_ctr_putJulia Lawall1-0/+4
After calling capi_ctr_get, error handling code should call capi_ctr_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = capi_ctr_get@p1(...)) == NULL || ...) S | x = capi_ctr_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != capi_ctr_put(x) when != if (x) { ... capi_ctr_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | capi_ctr_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = capi_ctr_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22netfilter: xt_time gives a wrong monthday in a leap yearKaihui Luo1-2/+4
The function localtime_3 in xt_time.c gives a wrong monthday in a leap year after 28th 2. calculating monthday should use the array days_since_leapyear[] not days_since_year[] in a leap year. Signed-off-by: Kaihui Luo <kaih.luo@gmail.com> Acked-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22cxgb3: Use SKB list interfaces instead of home-grown implementation.David S. Miller4-48/+42
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation.David S. Miller2-164/+190
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21bluetooth: hci_bcsp: Use SKB list interfaces instead of home-grown stuff.David S. Miller1-9/+9
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21aoe: Use SKB interfaces for list management instead of home-grown stuff.David S. Miller7-76/+56
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21net: Add new interfaces for SKB list light-weight init and splicing.David S. Miller1-2/+94
This will be used by subsequent changesets. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21atm: idt77252: Use generic SKB queue management instead of home-grown scheme.David S. Miller2-26/+10
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21net: Remove __skb_insert() calls outside of skbuff internals.David S. Miller6-10/+9
This minor cleanup simplifies later changes which will convert struct sk_buff and friends over to using struct list_head. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: advertise MSS requested by userTom Quetchenbach2-3/+14
I'm trying to use the TCP_MAXSEG option to setsockopt() to set the MSS for both sides of a bidirectional connection. man tcp says: "If this option is set before connection establishment, it also changes the MSS value announced to the other end in the initial packet." However, the kernel only uses the MTU/route cache to set the advertised MSS. That means if I set the MSS to, say, 500 before calling connect(), I will send at most 500-byte packets, but I will still receive 1500-byte packets in reply. This is a bug, either in the kernel or the documentation. This patch (applies to latest net-2.6) reduces the advertised value to that requested by the user as long as setsockopt() is called before connect() or accept(). This seems like the behavior that one would expect as well as that which is documented. I've tried to make sure that things that depend on the advertised MSS are set correctly. Signed-off-by: Tom Quetchenbach <virtualphtn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20net: Use hton[sl]() instead of __constant_hton[sl]() where applicableArnaldo Carvalho de Melo11-35/+35
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20multiq: requeue should rewind the current_bandAlexander Duyck1-0/+5
Currently dequeueing a packet and requeueing the same packet will cause a different packet to be pulled on the next dequeue. This change forces requeue to rewind the current_band. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: back retransmit_high when it over-estimatedIlpo Järvinen1-2/+10
If lost skb is sacked, we might have nothing to retransmit as high as the retransmit_high is pointing to, so place it lower to avoid unnecessary walking. This is mainly for the case where high L'ed skbs gets sacked. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: don't clear lost_skb_hint when not necessaryIlpo Järvinen1-1/+13
Most importantly avoid doing it with cumulative ACK. However, since we have lost_cnt_hint in the picture as well needing adjustments, it's not as trivial as dealing with retransmit_skb_hint (and cannot be done in the all place we could trivially leave retransmit_skb_hint untouched). With the previous patch, this should mostly remove O(n^2) behavior while cumulative ACKs start flowing once rexmit after a lossy round-trip made it through. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: don't clear retransmit_skb_hint when not necessaryIlpo Järvinen3-5/+14
Most importantly avoid doing it with cumulative ACK. Not clearing means that we no longer need n^2 processing in resolution of each fast recovery. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: remove retransmit_skb_hint clearing from failureIlpo Järvinen1-3/+1
This doesn't much sense here afaict, probably never has. Since fragmenting and collapsing deal the hints by themselves, there should be very little reason for the rexmit loop to do that. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: reorganize retransmit code loopsIlpo Järvinen3-48/+33
Both loops are quite similar, so they can be combined with little effort. As a result, forward_skb_hint becomes obsolete as well. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: remove tp->lost_out guard to make joining diff nicerIlpo Järvinen1-37/+38
The validity of the retransmit_high must then be ensured if no L'ed skb exits! This makes a minor change to behavior, we now have to iterate the head to find out that the loop terminates. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: Reorganize skb tagbit checksIlpo Järvinen1-19/+19
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: remove obsolete validity concernIlpo Järvinen1-4/+0
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: add tcp_can_forward_retransmitIlpo Järvinen1-18/+28
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: No need to clear retransmit_skb_hint when SACKingIlpo Järvinen1-7/+0
Because lost counter no longer requires tuning, this is trivial to remove (the tuning wouldn't have been too hard either) because no "new" retransmittable skb appeared below retransmit_skb_hint when SACKing for sure. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: Kill precaution that's very likely obsoleteIlpo Järvinen1-4/+0
I suspect it might have been related to the changed amount of lost skbs, which was counted by retransmit_cnt_hint that got changed. The place for this clearing was very illogical anyway, it should have been after the LOST-bit clearing loop to make any sense. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: convert retransmit_cnt_hint to seqnoIlpo Järvinen4-33/+30
Main benefit in this is that we can then freely point the retransmit_skb_hint to anywhere we want to because there's no longer need to know what would be the count changes involve, and since this is really used only as a terminator, unnecessary work is one time walk at most, and if some retransmissions are necessary after that point later on, the walk is not full waste of time anyway. Since retransmit_high must be kept valid, all lost markers must ensure that. Now I also have learned how those "holes" in the rexmittable skbs can appear, mtu probe does them. So I removed the misleading comment as well. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: add helper for lost bit togglingIlpo Järvinen1-10/+12
This useful because we'd need to verifying soon in many places which makes things slightly more complex than it used to be. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: move tcp_verify_retransmit_hintIlpo Järvinen1-13/+13
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20tcp: Partial hint clearing has again become meaninglessIlpo Järvinen3-11/+5
Ie., the difference between partial and all clearing doesn't exists anymore since the SACK optimizations got dropped by an sacktag rewrite. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19qlge: Protect qlge_resume() with CONFIG_PMDavid S. Miller1-0/+2
Fixes the following build warning: drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19qlge: Fix warnings in debugging code.David S. Miller1-12/+12
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_qdev’: drivers/net/qlge/qlge_dbg.c:369: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c:373: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_tx_ring’: drivers/net/qlge/qlge_dbg.c:457: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:461: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_rx_ring’: drivers/net/qlge/qlge_dbg.c:557: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:565: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:575: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:579: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:598: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:602: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19net: Fix build with ARCH=umDavid S. Miller1-0/+7
If UM is going to claim that it supports DMA by setting HAS_DMA, it should provide a dma_mapping_error() implementation. Based upon a report by Julius Volz. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18ISDN sockets: add missing lockdep stringsRémi Denis-Courmont1-3/+3
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Remove timer_interval field from the bnx2 structureBenjamin Li2-8/+8
The timer_interval field is only assigned once, and never reassigned. We can safely replace all instances of the timer_interval with a constant value. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Remove name field from bnx2 structureBenjamin Li2-4/+1
The name of the board is only used during the initialization of the adapter. We can save the space of a pointer by not storing this information. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.