aboutsummaryrefslogtreecommitdiffstats
path: root/net/atm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-01-26net/atm/signaling.c: checkpatch cleanupsJoe Perches1-101/+101
Mostly 80 column wrapped. Move embedded assigns out of tests Move trailing statements to new lines switch/case cleanups Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/resources.c: checkpatch cleanupsJoe Perches1-198/+192
Spacing cleanups Mostly 80 column wrapped. Move embedded assigns out of tests Move trailing statements to new lines switch/case cleanups Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/raw.c: checkpatch cleanupsJoe Perches1-14/+7
Spacing cleanups Mostly 80 column wrapped. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/pvc.c: checkpatch cleanupsJoe Perches1-22/+21
Spacing cleanups Mostly 80 column wrapped. Move trailing statements to new lines Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/proc.c: checkpatch cleanupsJoe Perches1-37/+44
Convert #include <asm... to #include <linux... Mostly 80 column wrapped. Spacing cleanups Move trailing statements to new lines switch/case cleanups Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/pppoatm.c: checkpatch cleanupsJoe Perches1-4/+7
Move embedded assigns out of tests Move trailing statements to new lines Move labels to column 1 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/mpoa_proc.c: checkpatch cleanupsJoe Perches1-33/+31
Convert #include <asm... to #include <linux... Add printk argument verification to dprintk and ddprintk Spacing cleanups Mostly 80 column wrapped. Removed unnecessary breaks after returns Use %pI4 in seq_printf of IP address Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/mpoa_caches.c: checkpatch cleanupsJoe Perches1-72/+88
Convert #include <asm... to #include <linux... Add printk argument verification to dprintk and ddprintk Spacing cleanups Mostly 80 column wrapped. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/mpc.c: checkpatch cleanupsJoe Perches1-193/+252
Convert #include <asm... to #include <linux... Add printk argument verification to dprintk and ddprintk Spacing cleanups Mostly 80 column wrapped. printk->pr_info and pr_cont Moved labels to column 1 Move trailing statements to new lines switch/case cleanups remove unnecessary breaks after returns Remove unnecessary braces around single line statements Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/lec.c: checkpatch cleanupsJoe Perches1-148/+136
Convert #include <asm... to #include <linux... Mostly 80 column wrapped. Spacing cleanups Convert printks to pr_<level> Use print_hex_dump Move embedded assigns out of tests Move trailing statements to new lines Remove unnecessary braces around single line statements switch/case cleanups Removed paren around returns Use %pM Moved leading continuation logical tests to end of previous line Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/ioctl.c: checkpatch cleanupsJoe Perches1-98/+97
Spacing cleanups Moved EXPORT_SYMBOL Mostly 80 column wrapped. switch/case cleanups Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/common.c: checkpatch cleanupsJoe Perches1-165/+173
Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/clip.c: checkpatch cleanupsJoe Perches1-14/+12
Convert #include <asm... to #include <linux... Spacing cleanups Move labels to column 1 Move logical continuation tests to end of previous line Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/br2684.c: checkpatch cleanupsJoe Perches1-41/+31
Convert #include <asm... to #include <linux... Use print_hex_dump Spacing cleanups Move logical continuation tests to end of previous line 80 column wrapping Move goto branch label to column 1 Remove unnecessary single statement braces Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/atm_sysfs.c: checkpatch cleanupsJoe Perches1-13/+14
Add space after for Indent switch/case statements 80 column wrapping Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/atm_misc.c: checkpatch cleanupsJoe Perches1-24/+16
Moved EXPORT_SYMBOL to follow definition Add space after commas Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm/addr.c: Convert include <asm to include <linuxJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26net/atm: Convert printk to pr_<level>Joe Perches12-212/+190
Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08atm: [br2684] allow routed mode operation againchas williams - CONTRACTOR1-3/+8
in routed mode, we don't have a hardware address so netdev_ops doesnt need to validate our hardware address via .ndo_validate_addr Reported-by: Manuel Fuentes <mfuentes@agenciaefe.com> Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08atm: [lec] initialize .netdev_ops before calling register_netdev()chas williams - CONTRACTOR1-9/+1
fix oops when initializing lane interfaces. lec should probably be changed to use alloc_netdev() instead. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25net: use net_eq to compare netsOctavian Purdila1-1/+1
Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11net/atm: move all compat_ioctl handling to atm/ioctl.cArnd Bergmann1-2/+175
We have two implementations of the compat_ioctl handling for ATM, the one that we have had for ages in fs/compat_ioctl.c and the one added to net/atm/ioctl.c by David Woodhouse. Unfortunately, both versions are incomplete, and in practice we use a very confusing combination of the two. For ioctl numbers that have the same identifier on 32 and 64 bit systems, we go directly through the compat_ioctl socket operation, for those that differ, we do a conversion in fs/compat_ioctl.c. This patch moves both variants into the vcc_compat_ioctl() function, while preserving the current behaviour. It also kills off the COMPATIBLE_IOCTL definitions that we never use here. Doing it this way is clearly not a good solution, but I hope it is a step into the right direction, so that someone is able to clean up this mess for real. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05net: pass kern to net_proto_family create functionEric Paris2-4/+6
The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12net: Generalize socket rx gap / receive queue overflow cmsgNeil Horman1-1/+1
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07net: mark net_proto_ops as constStephen Hemminger2-2/+2
All usages of structure net_proto_ops should be declared const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller4-4/+4
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02atm/br2684: netif_stop_queue() when atm device busy and netif_wake_queue() when we can send packets again.Karl Hiramoto1-10/+27
This patch removes the call to dev_kfree_skb() when the atm device is busy. Calling dev_kfree_skb() causes heavy packet loss then the device is under heavy load, the more correct behavior should be to stop the upper layers, then when the lower device can queue packets again wake the upper layers. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01net: make neigh_ops constantStephen Hemminger1-1/+1
These tables are never modified at runtime. Move to read-only section. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01convert ATM drivers to netdev_tx_tStephen Hemminger4-6/+12
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05net: mark read-only arrays as constJan Engelhardt2-8/+10
String literals are constant, and usually, we can also tag the array of pointers const too, moving it to the .rodata section. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-3/+3
2009-07-09net: adding memory barrier to the poll and receive callbacksJiri Olsa1-3/+3
Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: convert remaining non-symbolic return values in ndo_start_xmit() functionsPatrick McHardy1-1/+1
This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy3-12/+12
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18atm: sk_wmem_alloc initial value is oneEric Dumazet4-11/+10
commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. This broke net/atm since this protocol assumed a null initial value. This patch makes necessary changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13net: fix network drivers ndo_start_xmit() return values (part 7)Patrick McHardy1-1/+2
Fix up ATM drivers that return an errno value to qdisc_restart(), causing qdisc_restart() to print a warning an requeue/retransmit the skb. - lec: condition can only be remedied by userspace, until that retransmissions Compile tested only. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11bridge: Simplify interface for ATM LANEMichał Mirosław1-13/+4
This patch changes FDB entry check for ATM LANE bridge integration. There's no point in holding a FDB entry around SKB building. br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr() hook that checks if the addr has FDB entry pointing to other port to the one the request arrived on. FDB entry refcounting is removed as it's not used anywhere else. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->dst accessorsEric Dumazet2-8/+8
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29atm: unset IFF_XMIT_DST_RELEASE in clip_setup()Eric Dumazet1-0/+1
clip_start_xmit() needs skb->dst so tell dev_hard_start_xmit() to no release it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28atm: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller2-36/+17
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-02Subject: [PATCH] br2684: restore net_dev initializationRabin Vincent1-0/+1
Commit 0ba25ff4c669e5395110ba6ab4958a97a9f96922 ("br2684: convert to net_device_ops") inadvertently deleted the initialization of the net_dev pointer in the br2684_dev structure, leading to crashes. This patch adds it back. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan2-2/+0
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-21atm: convert clip driver to net_device_opsStephen Hemminger1-3/+6
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21atm: convert mpc device to using netdev_opsStephen Hemminger2-19/+18
This converts the mpc device to using new netdevice_ops. Compile tested only, needs more than usual review since device was swaping pointers around etc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21atm: lec use dev_change_mtuStephen Hemminger1-1/+1
Rather than calling device pointer directly (which is incorrect with net_device_ops), use the standard dev_change_mtu. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21lec: convert to net_device_opsStephen Hemminger1-9/+11
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21lec: convert to internal network_device_statsStephen Hemminger2-28/+17
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21clip: convert to internal network_device_statsStephen Hemminger1-18/+12
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21br2684: convert to net_device_opsStephen Hemminger1-9/+11
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21atm: br2684 internal statsStephen Hemminger1-23/+15
Now that stats are in net_device, use them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.