aboutsummaryrefslogtreecommitdiffstats
path: root/net/batman-adv/bat_v.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-23batman-adv: Replace a seq_puts() call by seq_putc() in two functionsMarkus Elfring1-1/+1
Two single characters (line breaks) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-16Merge tag 'batadv-net-for-davem-20170316' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-3/+11
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Keep fragments equally sized, avoids some problems with too small fragments, by Sven Eckelmann - Initialize gateway class correctly when BATMAN V is compiled in, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-04batman-adv: Initialize gw sel_class via batadv_algoSven Eckelmann1-3/+11
The gateway selection class variable is shared between different algorithm versions. But the interpretation of the content is algorithm specific. The initialization is therefore also algorithm specific. But this was implemented incorrectly and the initialization for BATMAN_V always overwrote the value previously written for BATMAN_IV. This could only be avoided when BATMAN_V was disabled during compile time. Using a special batadv_algo hook for this initialization avoids this problem. Fixes: 50164d8f500f ("batman-adv: B.A.T.M.A.N. V - implement GW selection logic") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-19batman-adv: Use proper name for gateway list headSven Eckelmann1-3/+3
The batman-adv codebase is using "list" for the list node (prev/next) and <list content descriptor>+"_list" for the head of a list. Not using this naming scheme can up in confusions when reading the code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-19batman-adv: Remove needless init of variables on stackSven Eckelmann1-1/+1
Some variables are overwritten immediatelly in a functions. These don't have to be initialized to a specific value on the stack because the value will be overwritten before they will be used anywhere. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Allow to disable debugfs supportSven Eckelmann1-0/+12
The files provided by batman-adv via debugfs are currently converted to netlink. Tools which are not yet converted to use the netlink interface may still rely on the old debugfs files. But systems which already upgraded their tools can save some space by disabling this feature. The default configuration of batman-adv on amd64 can reduce the size of the module by around 11% when this feature is disabled. $ size net/batman-adv/batman-adv.ko* text data bss dec hex filename 150507 10395 4160 165062 284c6 net/batman-adv/batman-adv.ko.y 137106 7099 2112 146317 23b8d net/batman-adv/batman-adv.ko.n Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementationsSven Eckelmann1-0/+125
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: add B.A.T.M.A.N. V bat_{orig, neigh}_dump implementationsMatthias Schiffer1-0/+340
Dump the algo V originators and neighbours. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: Fix includes, fix algo_ops integration] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: B.A.T.M.A.N. V - implement GW selection logicAntonio Quartulli1-1/+222
Since the GW selection logic has been made routing protocol specific it is now possible for B.A.T.M.A.N V to have its own mechanism by providing the API implementation. Implement the GW specific API in the B.A.T.M.A.N. V protocol in order to provide a working GW selection mechanism. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: make the GW selection class algorithm specificAntonio Quartulli1-0/+34
The B.A.T.M.A.N. V algorithm uses a different metric compared to its predecessor and for this reason the logic used to compute the best Gateway is also changed. This means that the GW selection class fed to this logic has a semantics that depends on the algorithm being used. Make the parsing and printing routine of the GW selection class routing algorithm specific. Each algorithm can now parse (and print) this value independently. If no API is provided by any algorithm, the default is to use the current mechanism of considering such value like an integer between 1 and 255. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04batman-adv: split routing API data structure in subobjectsAntonio Quartulli1-10/+16
The routing API data structure contains several function pointers that can easily be grouped together based on the component they work with. Split the API in subobjects in order to improve definition readability. At the same time, remove the "bat_" prefix from the API object and its fields names. These are batman-adv private structs and there is no need to always prepend such prefix, which only makes function invocations much much longer. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Fix bat_(iv|v) function declaration headerSven Eckelmann1-1/+2
The bat_algo.h had some functions declared which were not part of the bat_algo.c file. These are instead stored in bat_v.c and bat_iv_ogm.c. The declaration should therefore be also in bat_v.h and bat_iv_ogm,h to make them easier to find. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: init ELP tweaking options only onceMarek Lindner1-5/+14
The ELP interval and throughput override interface settings are initialized with default settings on every time an interface is added to a mesh. This patch prevents this behavior by moving the configuration init to the interface detection routine which runs only once per interface. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [a@unstable.cc: move initialization to batadv_v_hardif_init] Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: remove ogm_emit and ogm_schedule API callsAntonio Quartulli1-10/+0
The ogm_emit and ogm_schedule API calls were rather tight to the B.A.T.M.A.N. IV logic and therefore rather difficult to use with other algorithm implementations. Remove such calls and move the surrounding logic into the B.A.T.M.A.N. IV specific code. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-18batman-adv: initialize ELP orig address on secondary interfacesMarek Lindner1-0/+10
This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator which can potentially interfere with the rest of the neighbor statistics. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: make sure ELP/OGM orig MAC is updated on address changeAntonio Quartulli1-4/+22
When the MAC address of the primary interface is changed, update the originator address in the ELP and OGM skb buffers as well in order to reflect the change. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Reported-by: Marek Lindner <marek@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Fix refcnt leak in batadv_v_neigh_*Sven Eckelmann1-7/+25
The functions batadv_neigh_ifinfo_get increase the reference counter of the batadv_neigh_ifinfo. These have to be reduced again when the reference is not used anymore to correctly free the objects. Fixes: 9786906022eb ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Avoid nullptr derefence in batadv_v_neigh_is_sobSven Eckelmann1-0/+4
batadv_neigh_ifinfo_get can return NULL when it cannot find (even when only temporarily) anymore the neigh_ifinfo in the list neigh->ifinfo_list. This has to be checked to avoid kernel Oopses when the ifinfo is dereferenced. This a situation which isn't expected but is already handled by functions like batadv_v_neigh_cmp. The same kind of warning is therefore used before the function returns without dereferencing the pointers. Fixes: 9786906022eb ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-5/+4
Antonio Quartulli says: ==================== pull request: batman-adv 20160504 In this pull request you have: - two changes to the MAINTAINERS file where one marks our mailing list as moderated and the other adds a missing documentation file - kernel-doc fixes - code refactoring and various cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04batman-adv: use static string for table headersAntonio Quartulli1-5/+4
Use a static string when showing table headers rather then a nonsense parametric one with fixed arguments. It is easier to grep and it does not need to be recomputed at runtime each time. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP eventAntonio Quartulli1-0/+12
At the moment there is no explicit reactivation of an hard-interface upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is reactivated as soon as the next OGM is scheduled for sending, but this mechanism does not work with B.A.T.M.A.N. V. The latter does not rely on the same scheduling mechanism as its predecessor and for this reason the hard-interface remains deactivated forever after being brought down once. This patch fixes the reactivation mechanism by adding a new routing API which explicitly allows each algorithm to perform any needed operation upon interface re-activation. Such API is optional and is implemented by B.A.T.M.A.N. V only and it just takes care of setting the iface status to ACTIVE Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: B.A.T.M.A.N. V - implement bat_neigh_print APILinus Luessing1-0/+55
Lists all neighbours detected by the Echo Locating Protocol (ELP) and their throughput metric. Initially Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29batman-adv: B.A.T.M.A.N. V - implement bat_orig_print APIAntonio Quartulli1-0/+105
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API callsAntonio Quartulli1-0/+38
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: ELP - compute the metric based on the estimated throughputAntonio Quartulli1-0/+3
In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: add throughput override attribute to hard_ifacesAntonio Quartulli1-0/+6
This attribute is exported to user space to disable the link throughput auto-detection by setting a fixed value. The throughput override value is used when batman-adv is computing the link throughput towards a neighbour. If the value is set to 0 then batman-adv will try to detect the throughput by itself. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: OGMv2 - add basic infrastructureAntonio Quartulli1-3/+48
This is the initial implementation of the new OGM protocol (version 2). It has been designed to work on top of the newly added ELP. In the previous version the OGM protocol was used to both measure link qualities and flood the network with the metric information. In this version the protocol is in charge of the latter task only, leaving the former to ELP. This means being able to decouple the interval used by the neighbor discovery from the OGM broadcasting, which revealed to be costly in dense networks and needed to be relaxed so leading to a less responsive routing protocol. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: ELP - creating neighbor structuresLinus Luessing1-1/+22
Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29batman-adv: ELP - adding basic infrastructureLinus Luessing1-0/+74
The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.