aboutsummaryrefslogtreecommitdiffstats
path: root/net/batman-adv/main.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann1-1/+1
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21batman-adv: Let packet.h include its headers directlySven Eckelmann1-2/+0
The headers used by packet.h should also be included by it directly. main.h is currently dealing with it in batman-adv, but this will no longer work when this header is moved to include/uapi/linux/. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15batman-adv: Add kernel-doc to functions in headersSven Eckelmann1-13/+69
Externally visible functions should be documented with kernel-doc. This usually refers to non-static functions but also static inline files in headers are visible in other files and should therefore be documented. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add kernel-doc to enums in headersSven Eckelmann1-0/+32
All enums in types.h are already documented. But some other headers still have private enums which also should be documented. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann1-3/+3
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann1-0/+1
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-04batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-09-28batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-07-29batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-05-23batman-adv: decrease maximum fragment sizeMatthias Schiffer1-1/+1
With this patch the maximum fragment size is reduced from 1400 to 1280 bytes. Fragmentation v2 correctly uses the smaller of 1400 and the interface MTU, thus generally supporting interfaces with an MTU < 1400 bytes, too. However, currently "Fragmentation v2" does not support re-fragmentation. Which means that once a packet is split into two packets of 1400 + x bytes for instance and the next hop provides an interface with an even smaller MTU of 1280 bytes, then the larger fragment is lost. A maximum fragment size of 1280 bytes is a safer option as this is the minimum MTU required by IPv6, making interfaces with an MTU < 1280 rather exotic. Regarding performance, this should have no negative impact on unicast traffic: Having some more bytes in the smaller and some less in the larger does not change the sum of both fragments. Concerning TT, choosing 1280 bytes fragments might result in more TT messages than necessary when a large network is bridged into batman-adv. However, the TT overhead in general is marginal due to its reactive nature, therefore such a performance impact on TT should not be noticeable for a user. Cc: Matthias Schiffer <mschiffer@universe-factory.net> [linus.luessing@c0d3.blue: Added commit message] Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-05-23batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-16batman-adv: Convert BATADV_PRINT_VID macro to functionSven Eckelmann1-2/+14
The BATADV_PRINT_VID is not free of of possible side-effects. This can be avoided when the the macro is converted to a simple inline function. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-16batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-01batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Use own timer for multicast TT and TVLV updatesLinus Lüssing1-0/+1
Instead of latching onto the OGM period, this patch introduces a worker dedicated to multicast TT and TVLV updates. The reasoning is, that upon roaming especially the translation table should be updated timely to minimize connectivity issues. With BATMAN V, the idea is to greatly increase the OGM interval to reduce overhead. Unfortunately, right now this could lead to a bad user experience if multicast traffic is involved. Therefore this patch introduces a fixed 500ms update interval for multicast TT entries and the multicast TVLV. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-19batman-adv: Avoid precedence issues in macrosSven Eckelmann1-2/+2
It must be avoided that arguments to a macro are evaluated ungrouped (which enforces normal operator precendence). Otherwise the result of the macro is not well defined. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-17batman-adv: Move batadv_sum_counter to soft-interface.cSven Eckelmann1-21/+0
The function batadv_sum_counter is only used in soft-interface.c and has no special relevance for main.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-17batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2016-07-04batman-adv: throughput meter implementationAntonio Quartulli1-0/+8
The throughput meter module is a simple, kernel-space replacement for throughtput measurements tool like iperf and netperf. It is intended to approximate TCP behaviour. It is invoked through batctl: the protocol is connection oriented, with cumulative acknowledgment and a dynamic-size sliding window. The test *can* be interrupted by batctl. A receiver side timeout avoids unlimited waitings for sender packets: after one second of inactivity, the receiver abort the ongoing test. Based on a prototype from Edo Monticelli <montik@autistici.org> Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann1-67/+2
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: move bat_algo functions into a separate fileSven Eckelmann1-4/+0
The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: split tvlv into a separate fileMarkus Pargmann1-34/+0
The tvlv functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~45%, 588 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c Signed-off-by: Markus Pargmann <mpa@pengutronix.de> [sven@narfation.org: fix conflicts with current version, fix includes, rewrote commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Keep includes ordered by filenameSven Eckelmann1-3/+3
It is easier to detect if a include is already there for a used functionality when the includes are ordered. Using an alphabetic order together with the grouping in commit 1e2c2a4fe4a5 ("batman-adv: Add required includes to all files") makes includes better manageable. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Adding logging of mcast flag changesLinus Lüssing1-1/+3
With this patch changes relevant to a node's own multicast flags are printed to the 'mcast' log level. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann1-1/+1
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: add detection for complex bridge loopsSimon Wunderlich1-0/+4
There are network setups where the current bridge loop avoidance can't detect bridge loops. The minimal setup affected would consist of two LANs and two separate meshes, connected in a ring like that: A...(mesh1)...B | | (LAN1) (LAN2) | | C...(mesh2)...D Since both the meshes and backbones are separate, the bridge loop avoidance has not enough information to detect and avoid the loop in this case. Even if these scenarios can't be fixed easily, these kind of loops can be detected. This patch implements a periodic check (running every 60 seconds for now) which sends a broadcast frame with a random MAC address on each backbone VLAN. If a broadcast frame with the same MAC address is received shortly after on the mesh, we know that there must be a loop and report that incident as well as throw an uevent to let others handle that problem. Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04batman-adv: fix wrong names in kerneldocAntonio Quartulli1-1/+2
Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: Fix additional names] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-04batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-29batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-29batman-adv: ELP - send unicast ELP packets for throughput samplingAntonio Quartulli1-0/+3
In case of an unused wireless link, the mac80211 throughput estimation won't get updated further. Consequently, the reported throughput metric will become obsolete. With this patch unicast sampling is introduced by periodically sending unicast ELP packets to each neighbor on idle WiFi links. These sampling packets will fill an entire frame, so that the measurement is as reliable as possible Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: ELP - compute the metric based on the estimated throughputAntonio Quartulli1-0/+1
In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: OGMv2 - implement originators logicAntonio Quartulli1-0/+2
Add the support for recognising new originators in the network and rebroadcast their OGMs. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: OGMv2 - add basic infrastructureAntonio Quartulli1-0/+1
This is the initial implementation of the new OGM protocol (version 2). It has been designed to work on top of the newly added ELP. In the previous version the OGM protocol was used to both measure link qualities and flood the network with the metric information. In this version the protocol is in charge of the latter task only, leaving the former to ELP. This means being able to decouple the interval used by the neighbor discovery from the OGM broadcasting, which revealed to be costly in dense networks and needed to be relaxed so leading to a less responsive routing protocol. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: ELP - creating neighbor structuresLinus Luessing1-0/+3
Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-23batman-adv: remove unused BATADV_BONDING_TQ_THRESHOLD constantAntonio Quartulli1-5/+0
BATADV_BONDING_TQ_THRESHOLD is not used anymore since the implementation of the bat_neigh_is_similar_or_better() API function. Such function uses the more generic BATADV_TQ_SIMILARITY_THRESHOLD constant. Therefore, remove definition of the unused BATADV_BONDING_TQ_THRESHOLD constant. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-10batman-adv: add seqno maximum age and protection start flag parametersSimon Wunderlich1-0/+3
To allow future use of the window protected function with different maximum sequence numbers, add a parameter to set this value which was previously hardcoded. Another parameter added for future use is a flag to return whether the protection window has started. While at it, also fix the kerneldoc. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: update copyright years for 2016Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc of main functionsSven Eckelmann1-0/+4
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc parsing of return descriptionSven Eckelmann1-3/+10
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: increase BLA wait periods to 6Simon Wunderlich1-1/+1
If networks take a long time to come up, e.g. due to lossy links, then the bridge loop avoidance wait time to suppress broadcasts may not wait long enough and detect a backbone before the mesh is brought up. Increasing the wait period further to 60 seconds makes this scenario less likely. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-08-27batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Replace C99 int types with kernel typeSven Eckelmann1-25/+23
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: Clarify calculation precedence for '&' and '?'Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann1-16/+13
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Use common Jenkins Hash implementationSven Eckelmann1-0/+1
An unoptimized version of the Jenkins one-at-a-time hash function is used and partially copied all over the code wherever an hashtable is used. Instead the optimized version shared between the whole kernel should be used to reduce code duplication and use better optimized code. Only the DAT code must use the old implementation because it is used as distributed hash function which has to be common for all nodes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: main, batadv_compare_eth return boolMarkus Pargmann1-1/+1
Declare the returntype of batadv_compare_eth as bool. The function called inside this helper function (ether_addr_equal_unaligned) also uses bool as return value, so there is no need to return int. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.