aboutsummaryrefslogtreecommitdiffstats
path: root/net/batman-adv/originator.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Fix internal interface indices typesSven Eckelmann1-2/+2
batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add kernel-doc to externally visible functionsSven Eckelmann1-0/+43
According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann1-38/+38
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: include gfp.h for GFP_* definesSven Eckelmann1-1/+1
The linux/gfp.h provides the GFP_ATOMIC and GFP_KERNEL define. It should therefore be included instead of linux/fs.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann1-0/+1
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-04batman-adv: Deinline batadv_orig_hash_find, save 7339 bytesDenys Vlasenko1-0/+32
This function compiles to 288 bytes of machine code for Linux 4.14 on Debian Stretch amd64 and (6.3.0-18) with the default configuration. 27 callsites (25 used in default config). text data bss dec hex filename 179291 10317 4416 194024 2f5e8 batman-adv.ko.pre 171952 10317 4416 186685 2d93d batman-adv.ko.post Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> [sven@narfation.org: Fix includes, correct sizes+counts in commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-09-28batman-adv: Remove unnecessary parenthesesSven Eckelmann1-13/+13
checkpatch introduced with commit 63b7c73ec86b ("checkpatch: add --strict check for ifs with unnecessary parentheses") an additional test which identifies some unnecessary parentheses. Remove these unnecessary parentheses to avoid the warnings and to unify the coding style slightly more. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-09Merge tag 'batadv-next-for-davem-20161108-v2' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-4/+9
Simon Wunderlich says: ==================== pull request for net-next: batman-adv 2016-11-08 v2 This feature and cleanup patchset includes the following changes: - netlink and code cleanups by Sven Eckelmann (3 patches) - Cleanup and minor fixes by Linus Luessing (3 patches) - Speed up multicast update intervals, by Linus Luessing - Avoid (re)broadcast in meshes for some easy cases, by Linus Luessing - Clean up tx return state handling, by Sven Eckelmann (6 patches) - Fix some special mac address handling cases, by Sven Eckelmann (3 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30batman-adv: Simple (re)broadcast avoidanceLinus Lüssing1-4/+9
With this patch, (re)broadcasting on a specific interfaces is avoided: * No neighbor: There is no need to broadcast on an interface if there is no node behind it. * Single neighbor is source: If there is just one neighbor on an interface and if this neighbor is the one we actually got this broadcast packet from, then we do not need to echo it back. * Single neighbor is originator: If there is just one neighbor on an interface and if this neighbor is the originator of this broadcast packet, then we do not need to echo it back. Goodies for BATMAN V: ("Upgrade your BATMAN IV network to V now to get these for free!") Thanks to the split of OGMv1 into two packet types, OGMv2 and ELP that is, we can now apply the same optimizations stated above to OGMv2 packets, too. Furthermore, with BATMAN V, rebroadcasts can be reduced in certain multi interface cases, too, where BATMAN IV cannot. This is thanks to the removal of the "secondary interface originator" concept in BATMAN V. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-19batman-adv: Use proper name for fragments list headSven Eckelmann1-1/+1
The batman-adv codebase is using "list" for the list node (prev/next) and <list content descriptor>+"_list" for the head of a list. Not using this naming scheme can up in confusions because list_head is used for both the head of the list and the list node (prev/next) in each item of the list. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-19batman-adv: Remove needless init of variables on stackSven Eckelmann1-4/+4
Some variables are overwritten immediatelly in a functions. These don't have to be initialized to a specific value on the stack because the value will be overwritten before they will be used anywhere. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-17batman-adv: Modify neigh_list only with rcu-list functionsSven Eckelmann1-1/+1
The batadv_hard_iface::neigh_list is accessed via rcu based primitives. Thus all operations done on it have to fulfill the requirements by RCU. So using non-RCU mechanisms like hlist_add_head is not allowed because it misses the barriers required to protect concurrent readers when accessing the data behind the pointer. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Allow to disable debugfs supportSven Eckelmann1-0/+4
The files provided by batman-adv via debugfs are currently converted to netlink. Tools which are not yet converted to use the netlink interface may still rely on the old debugfs files. But systems which already upgraded their tools can save some space by disabling this feature. The default configuration of batman-adv on amd64 can reduce the size of the module by around 11% when this feature is disabled. $ size net/batman-adv/batman-adv.ko* text data bss dec hex filename 150507 10395 4160 165062 284c6 net/batman-adv/batman-adv.ko.y 137106 7099 2112 146317 23b8d net/batman-adv/batman-adv.ko.n Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for orig_node near useSven Eckelmann1-1/+0
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for neigh_node near useSven Eckelmann1-1/+1
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for neigh_ifinfo near useSven Eckelmann1-1/+1
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for orig_ifinfo near useSven Eckelmann1-0/+1
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for orig_node_vlan near useSven Eckelmann1-1/+1
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: netlink: add originator and neighbor table queriesMatthias Schiffer1-0/+160
Add BATADV_CMD_GET_ORIGINATORS and BATADV_CMD_GET_NEIGHBORS commands, using handlers bat_orig_dump and bat_neigh_dump in batadv_algo_ops. Will always return -EOPNOTSUPP for now, as no implementations exist yet. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: Rewrite based on new algo_ops structures] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+15
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05batman-adv: Free last_bonding_candidate on release of orig_nodeSven Eckelmann1-0/+7
The orig_ifinfo reference counter for last_bonding_candidate in batadv_orig_node has to be reduced when an originator node is released. Otherwise the orig_ifinfo is leaked and the reference counter the netdevice is not reduced correctly. Fixes: f3b3d9018975 ("batman-adv: add bonding again") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-05batman-adv: Fix orig_node_vlan leak on orig_node_releaseSven Eckelmann1-0/+8
batadv_orig_node_new uses batadv_orig_node_vlan_new to allocate a new batadv_orig_node_vlan and add it to batadv_orig_node::vlan_list. References to this list have also to be cleaned when the batadv_orig_node is removed. Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04batman-adv: split routing API data structure in subobjectsAntonio Quartulli1-26/+23
The routing API data structure contains several function pointers that can easily be grouped together based on the component they work with. Split the API in subobjects in order to improve definition readability. At the same time, remove the "bat_" prefix from the API object and its fields names. These are batman-adv private structs and there is no need to always prepend such prefix, which only makes function invocations much much longer. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann1-0/+1
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: move bat_algo functions into a separate fileSven Eckelmann1-0/+1
The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: remove unused callback from batadv_algo_ops structMarek Lindner1-5/+0
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: refactor batadv_neigh_node_* functions to follow common styleMarek Lindner1-6/+29
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-18batman-adv: Avoid duplicate neigh_node additionsLinus Lüssing1-2/+4
Two parallel calls to batadv_neigh_node_new() might race for creating and adding the same neig_node. Fix this by including the check for any already existing, identical neigh_node within the spin-lock. This fixes splats like the following: [ 739.535069] ------------[ cut here ]------------ [ 739.535079] WARNING: CPU: 0 PID: 0 at /usr/src/batman-adv/git/batman-adv/net/batman-adv/bat_iv_ogm.c:1004 batadv_iv_ogm_process_per_outif+0xe3f/0xe60 [batman_adv]() [ 739.535092] too many matching neigh_nodes [ 739.535094] Modules linked in: dm_mod tun ip6table_filter ip6table_mangle ip6table_nat nf_nat_ipv6 ip6_tables xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_TCPMSS xt_mark iptable_mangle xt_tcpudp xt_conntrack iptable_filter ip_tables x_tables ip_gre ip_tunnel gre bridge stp llc thermal_sys kvm_intel kvm crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd evdev pcspkr ip6_gre ip6_tunnel tunnel6 batman_adv(O) libcrc32c nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack autofs4 ext4 crc16 mbcache jbd2 xen_netfront xen_blkfront crc32c_intel [ 739.535177] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.2.0-0.bpo.1-amd64 #1 Debian 4.2.6-3~bpo8+2 [ 739.535186] 0000000000000000 ffffffffa013b050 ffffffff81554521 ffff88007d003c18 [ 739.535201] ffffffff8106fa01 0000000000000000 ffff8800047a087a ffff880079c3a000 [ 739.735602] ffff88007b82bf40 ffff88007bc2d1c0 ffffffff8106fa7a ffffffffa013aa8e [ 739.735624] Call Trace: [ 739.735639] <IRQ> [<ffffffff81554521>] ? dump_stack+0x40/0x50 [ 739.735677] [<ffffffff8106fa01>] ? warn_slowpath_common+0x81/0xb0 [ 739.735692] [<ffffffff8106fa7a>] ? warn_slowpath_fmt+0x4a/0x50 [ 739.735715] [<ffffffffa012448f>] ? batadv_iv_ogm_process_per_outif+0xe3f/0xe60 [batman_adv] [ 739.735740] [<ffffffffa0124813>] ? batadv_iv_ogm_receive+0x363/0x380 [batman_adv] [ 739.735762] [<ffffffffa0124813>] ? batadv_iv_ogm_receive+0x363/0x380 [batman_adv] [ 739.735783] [<ffffffff810b0841>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [ 739.735804] [<ffffffffa012cb39>] ? batadv_batman_skb_recv+0xc9/0x110 [batman_adv] [ 739.735825] [<ffffffff81464891>] ? __netif_receive_skb_core+0x841/0x9a0 [ 739.735838] [<ffffffff810b0841>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [ 739.735853] [<ffffffff81465681>] ? process_backlog+0xa1/0x140 [ 739.735864] [<ffffffff81464f1a>] ? net_rx_action+0x20a/0x320 [ 739.735878] [<ffffffff81073aa7>] ? __do_softirq+0x107/0x270 [ 739.735891] [<ffffffff81073d82>] ? irq_exit+0x92/0xa0 [ 739.735905] [<ffffffff8137e0d1>] ? xen_evtchn_do_upcall+0x31/0x40 [ 739.735924] [<ffffffff8155b8fe>] ? xen_do_hypervisor_callback+0x1e/0x40 [ 739.735939] <EOI> [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20 [ 739.735965] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20 [ 739.735979] [<ffffffff8100a39c>] ? xen_safe_halt+0xc/0x20 [ 739.735991] [<ffffffff8101da6c>] ? default_idle+0x1c/0xa0 [ 739.736004] [<ffffffff810abf6b>] ? cpu_startup_entry+0x2eb/0x350 [ 739.736019] [<ffffffff81b2af5e>] ? start_kernel+0x480/0x48b [ 739.736032] [<ffffffff81b2d116>] ? xen_start_kernel+0x507/0x511 [ 739.736048] ---[ end trace c106bb901244bc8c ]--- Fixes: f987ed6ebd99 ("batman-adv: protect neighbor list with rcu locks") Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann1-2/+2
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for hard_iface subfunctionsSven Eckelmann1-23/+7
The callers of the functions using batadv_hard_iface objects already make sure that they hold a valid reference. The subfunctions don't have to check whether the reference counter is > 0 because this was checked by the callers. The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Check hard_iface refcnt before calling functionSven Eckelmann1-0/+5
The batadv_hardif_list list is checked in many situations and the items in this list are given to specialized functions to modify the routing behavior. At the moment each of these called functions has to check itself whether the received batadv_hard_iface has a refcount > 0 before it can increase the reference counter and use it in other objects. This can easily lead to problems because it is not easily visible where all callers of a function got the batadv_hard_iface object from and whether they already hold a valid reference. Checking the reference counter directly before calling a subfunction with a pointer from the batadv_hardif_list avoids this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-2/+2
Antonio Quartulli says: ==================== pull request: batman-adv 20160504 In this pull request you have: - two changes to the MAINTAINERS file where one marks our mailing list as moderated and the other adds a missing documentation file - kernel-doc fixes - code refactoring and various cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04batman-adv: fix wrong names in kerneldocAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: Fix additional names] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-04batman-adv: use to_delayed_workGeliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: Fix reference counting of hardif_neigh_node object for neigh_nodeSven Eckelmann1-11/+5
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held an implicit reference to it. But this reference was never stored in form of a pointer in the batadv_neigh_node itself. Instead batadv_neigh_node_release depends on a consistent state of hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the batadv_hardif_neigh_node object which it has a reference for. But batadv_hardif_neigh_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that a neigh_addr is in this list twice or that batadv_hardif_neigh_get cannot find the batadv_hardif_neigh_node for an neigh_addr due to some other list operations taking place at the same time. Instead add a batadv_hardif_neigh_node pointer directly in batadv_neigh_node which will be used for the reference counter decremented on release of batadv_neigh_node. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: init neigh node last seen fieldMarek Lindner1-0/+1
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node_vlan *_free_ref function to *_putSven Eckelmann1-4/+4
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif_neigh *_free_ref function to *_putSven Eckelmann1-5/+5
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_ifinfo *_free_ref function to *_putSven Eckelmann1-5/+5
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_neigh_ifinfo *_free_ref function to *_putSven Eckelmann1-4/+4
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_neigh_node *_free_ref function to *_putSven Eckelmann1-8/+8
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann1-8/+8
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node *_free_ref function to *_putSven Eckelmann1-4/+4
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_orig_node to krefSven Eckelmann1-5/+9
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_orig_node_vlan to krefSven Eckelmann1-6/+20
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_hard_iface to krefSven Eckelmann1-4/+4
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.