aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-05Bluetooth: Ignore CC events not matching the last HCI commandJoão Paulo Rechi Vita1-0/+5
This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-24Bluetooth: hci_core: Don't stop BT if the BD address missing in dtsBalakrishna Godavarthi1-2/+0
When flag HCI_QUIRK_USE_BDADDR_PROPERTY is set, we will read the bluetooth address from dts. If the bluetooth address node is missing from the dts we will enable it controller UNCONFIGURED state. This patch enables the normal flow even if the BD address is missing from the dts tree. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-26Bluetooth: Add quirk for reading BD_ADDR from fwnode propertyMatthias Kaehlcke1-0/+43
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve the public Bluetooth address from the firmware node property 'local-bd-address'. If quirk is set and the property does not exist or is invalid the controller is marked as unconfigured. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-01-25Bluetooth: make hw_err static, reduces object code sizeColin Ian King1-1/+1
Don't populate the const array hw_err on the stack but instead make it static. Makes the object code smaller by 45 bytes: Before: text data bss dec hex filename 100880 21090 1088 123058 1e0b2 linux/net/bluetooth/hci_core.o After: text data bss dec hex filename 100739 21186 1088 123013 1e085 linux/net/bluetooth/hci_core.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-01-25Bluetooth: Allow driver specific cmd timeout handlingRajat Jain1-0/+3
Add a hook to allow the BT driver to do device or command specific handling in case of timeouts. This is to be used by Intel driver to reset the device after certain number of timeouts. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-28Bluetooth: Fix debugfs NULL pointer dereferenceMatias Karhumaa1-0/+2
Fix crash caused by NULL pointer dereference when debugfs functions le_max_key_read, le_max_key_size_write, le_min_key_size_read or le_min_key_size_write and Bluetooth adapter was powered off. Fix is to move max_key_size and min_key_size from smp_dev to hci_dev. At the same time they were renamed to le_max_key_size and le_min_key_size. BUG: unable to handle kernel NULL pointer dereference at 00000000000002e8 PGD 0 P4D 0 Oops: 0000 [#24] SMP PTI CPU: 2 PID: 6255 Comm: cat Tainted: G D OE 4.18.9-200.fc28.x86_64 #1 Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET76WW (1.46 ) 06/21/2018 RIP: 0010:le_max_key_size_read+0x45/0xb0 [bluetooth] Code: 00 00 00 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 8b 87 c8 00 00 00 48 8d 7c 24 04 48 8b 80 48 0a 00 00 <48> 8b 80 e8 02 00 00 0f b6 48 52 e8 fb b6 b3 ed be 04 00 00 00 48 RSP: 0018:ffffab23c3ff3df0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00007f0b4ca2e000 RCX: ffffab23c3ff3f08 RDX: ffffffffc0ddb033 RSI: 0000000000000004 RDI: ffffab23c3ff3df4 RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffab23c3ff3ed8 R11: 0000000000000000 R12: ffffab23c3ff3f08 R13: 00007f0b4ca2e000 R14: 0000000000020000 R15: ffffab23c3ff3f08 FS: 00007f0b4ca0f540(0000) GS:ffff91bd5e280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002e8 CR3: 00000000629fa006 CR4: 00000000000606e0 Call Trace: full_proxy_read+0x53/0x80 __vfs_read+0x36/0x180 vfs_read+0x8a/0x140 ksys_read+0x4f/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: Add definitions and track LE resolve list modificationAnkit Navik1-0/+63
Add the definitions for adding entries to the LE resolve list and removing entries from the LE resolve list. When the LE resolve list gets changed via HCI commands make sure that the internal storage of the resolve list entries gets updated. Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Add new quirk for non-persistent setup settingsSean Wang1-1/+2
Add a new quirk HCI_QUIRK_NON_PERSISTENT_SETUP allowing that a quirk that runs setup() after every open() and not just after the first open(). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Handle ADv set terminated eventJaganath Kanakkassery1-0/+8
This event comes after connection complete event for incoming connections. Since we now have different random address for each instance, conn resp address is assigned from this event. As of now only connection part is handled as we are not enabling duration or max num of events while starting ext adv. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement Set ADV set random addressJaganath Kanakkassery1-1/+32
This basically sets the random address for the adv instance Random address can be set only if the instance is created which is done in Set ext adv param. Random address and rpa expire timer and flags have been added to adv instance which will be used when the respective instance is scheduled. This introduces a hci_get_random_address() which returns the own address type and random address (rpa or nrpa) based on the instance flags and hdev flags. New function is required since own address type should be known before setting adv params but address can be set only after setting params. < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Impmlement extended adv enableJaganath Kanakkassery1-0/+2
This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Read no of adv sets during initJaganath Kanakkassery1-2/+14
This patch reads the number of advertising sets in the controller during init and save it in hdev. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement PHY changed eventJaganath Kanakkassery1-0/+4
This defines and implement phy changed event and send it to user whenever selected PHYs changes using SET_PHY_CONFIGURATION. This will be also trigerred when BREDR pkt_type is changed using the legacy ioctl HCISETPTYPE. @ MGMT Command: Set PHY Configuration (0x0045) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX < HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 All PHYs preference: 0x00 TX PHYs preference: 0x07 LE 1M LE 2M LE Coded RX PHYs preference: 0x07 LE 1M LE 2M LE Coded > HCI Event: Command Complete (0x0e) plen 4 LE Set Default PHY (0x08|0x0031) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 3 Set PHY Configuration (0x0045) plen 0 Status: Success (0x00) @ MGMT Event: PHY Configuration Changed (0x0026) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Define PHY flags in hdev and set 1M as defaultJaganath Kanakkassery1-4/+5
1M is mandatory to be supported by LE controllers and the same would be set in power on. This patch defines hdev flags for LE PHYs and set 1M to default. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Use extended LE Connection if supportedJaganath Kanakkassery1-0/+8
This implements extended LE craete connection and enhanced LE conn complete event if the controller supports. For now it is as good as legacy LE connection and event as no new features in the extended connection is handled. < HCI Command: LE Extended Create Connection (0x08|0x0043) plen 26 Filter policy: White list is not used (0x00) Own address type: Public (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Initiating PHYs: 0x01 Entry 0: LE 1M Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Min connection interval: 50.00 msec (0x0028) Max connection interval: 70.00 msec (0x0038) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 2 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) Status: Success (0x00) Handle: 3585 Role: Master (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Connection interval: 67.50 msec (0x0036) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 @ MGMT Event: Device Connected (0x000b) plen 40 LE Address: DB:7E:2E:1D:85:E8 (Static) Flags: 0x00000000 Data length: 27 Name (complete): Designer Mouse Appearance: Mouse (0x03c2) Flags: 0x05 LE Limited Discoverable Mode BR/EDR Not Supported 16-bit Service UUIDs (complete): 1 entry Human Interface Device (0x1812) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Process extended ADV report eventJaganath Kanakkassery1-0/+9
This patch enables Extended ADV report event if extended scanning is supported in the controller and process the same. The new features are not handled and for now its as good as legacy ADV report. > HCI Event: LE Meta Event (0x3e) plen 53 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x0013 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Legacy PDU Type: ADV_IND (0x0013) Address type: Random (0x01) Address: DB:7E:2E:1A:85:E8 (Static) Primary PHY: LE 1M Secondary PHY: LE 1M SID: 0x00 TX power: 0 dBm RSSI: -90 dBm (0xa6) Periodic advertising invteral: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1b 0f 09 44 65 73 69 67 6e 65 72 20 4d 6f 75 73 65 ..Designer Mouse 03 19 c2 03 02 01 05 03 03 12 18 ........... Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Add HCI command for clear Resolv listAnkit Navik1-0/+5
Check for Resolv list supported by controller. So check the supported commmand first before issuing this command i.e.,HCI_OP_LE_CLEAR_RESOLV_LIST Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 28.919131 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 28.920016 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 28.920164 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 28.920873 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 28.921109 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 28.922016 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0 #61 [hci0] 28.922166 > HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 28.922872 LE Clear Resolving List (0x08|0x0029) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #63 [hci0] 28.923117 > HCI Event: Command Complete (0x0e) plen 12 #64 [hci0] 28.924030 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Store Resolv list sizeAnkit Navik1-0/+8
When the controller supports the Read LE Resolv List size feature, the maximum list size are read and now stored. Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 17.979791 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 17.980629 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 17.980786 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 17.981627 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #59 [hci0] 17.981786 > HCI Event: Command Complete (0x0e) plen 12 #60 [hci0] 17.982636 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-30Bluetooth: Re-use kstrtobool_from_user()Andy Shevchenko1-16/+7
Re-use kstrtobool_from_user() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: Add __hci_cmd_send functionLoic Poulain1-0/+31
This function allows to send a HCI command without expecting any controller event/response in return. This is allowed for vendor- specific commands only. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-30Bluetooth: Use bt_dev_err and bt_dev_info when possibleMarcel Holtmann1-18/+17
In case of using BT_ERR and BT_INFO, convert to bt_dev_err and bt_dev_info when possible. This allows for controller specific reporting. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-29bluetooth: remove WQ_MEM_RECLAIM from hci workqueuesTejun Heo1-4/+3
Bluetooth hci uses ordered HIGHPRI, MEM_RECLAIM workqueues. It's likely that the flags came from mechanical conversion from create_singlethread_workqueue(). Bluetooth shouldn't be depended upon for memory reclaim and the spurious MEM_RECLAIM flag can trigger the following warning. Remove WQ_MEM_RECLAIM and convert to alloc_ordered_workqueue() while at it. workqueue: WQ_MEM_RECLAIM hci0:hci_power_off is flushing !WQ_MEM_RECLAIM events:btusb_work ------------[ cut here ]------------ WARNING: CPU: 2 PID: 14231 at /home/brodo/local/kernel/git/linux/kernel/workqueue.c:2423 check_flush_dependency+0xb3/0x100 Modules linked in: CPU: 2 PID: 14231 Comm: kworker/u9:4 Not tainted 4.12.0-rc6+ #3 Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11 12/08/2016 Workqueue: hci0 hci_power_off task: ffff9432dad58000 task.stack: ffff986d43790000 RIP: 0010:check_flush_dependency+0xb3/0x100 RSP: 0018:ffff986d43793c90 EFLAGS: 00010086 RAX: 000000000000005a RBX: ffff943316810820 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000096 RDI: 0000000000000001 RBP: ffff986d43793cb0 R08: 0000000000000775 R09: ffffffff85bdd5c0 R10: 0000000000000040 R11: 0000000000000000 R12: ffffffff84d596e0 R13: ffff9432dad58000 R14: ffff94321c640320 R15: ffff9432dad58000 FS: 0000000000000000(0000) GS:ffff94331f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007b8bca242000 CR3: 000000014f60a000 CR4: 00000000003406e0 Call Trace: flush_work+0x8a/0x1c0 ? flush_work+0x184/0x1c0 ? skb_free_head+0x21/0x30 __cancel_work_timer+0x124/0x1b0 ? hci_dev_do_close+0x2a4/0x4d0 cancel_work_sync+0x10/0x20 btusb_close+0x23/0x100 hci_dev_do_close+0x2ca/0x4d0 hci_power_off+0x1e/0x50 process_one_work+0x184/0x3e0 worker_thread+0x4a/0x3a0 ? preempt_count_sub+0x9b/0x100 ? preempt_count_sub+0x9b/0x100 kthread+0x125/0x140 ? process_one_work+0x3e0/0x3e0 ? __kthread_create_on_node+0x1a0/0x1a0 ? do_syscall_64+0x58/0xd0 ret_from_fork+0x27/0x40 Code: 00 75 bf 49 8b 56 18 48 8d 8b b0 00 00 00 48 81 c6 b0 00 00 00 4d 89 e0 48 c7 c7 20 23 6b 85 c6 05 83 cd 31 01 01 e8 bf c4 0c 00 <0f> ff eb 93 80 3d 74 cd 31 01 00 75 a5 65 48 8b 04 25 00 c5 00 ---[ end trace b88fd2f77754bfec ]--- Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-1/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12Bluetooth: Send HCI Set Event Mask Page 2 command only when neededMarcel Holtmann1-2/+15
The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
2017-05-18Bluetooth: Skip vendor diagnostic configuration for HCI User ChannelMarcel Holtmann1-5/+6
When the HCI User Channel access is requested, then do not try to undermine it with vendor diagnostic configuration. The exclusive user is required to configure its own vendor diagnostic in that case and can not rely on the host stack support. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Set LE Default PHY preferencesMarcel Holtmann1-0/+12
If the LE Set Default PHY command is supported, the indicate to the controller that the host has no preferences for transmitter PHY or receiver PHY selection. Issuing this command gives the controller a clear indication that other PHY can be selected if available. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Enable LE PHY Update Complete eventMarcel Holtmann1-0/+6
If either LE Set Default PHY command or LE Set PHY commands is supported, then enable the LE PHY Update Complete event. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Enable LE Channel Selection Algorithm eventMarcel Holtmann1-0/+8
If the Channel Selection Algorithm #2 feature is supported, then enable the new LE Channel Selection Algorithm event. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Set LE Suggested Default Data Length to maximumMarcel Holtmann1-0/+9
When LE Data Packet Length Extension is supported, then actually increase the suggested default data length to the maximum to enable higher througput. < HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 2120 Max RX octets: 251 Max RX time: 2120 < HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0 > HCI Event: Command Complete (0x0e) plen 8 LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1 Status: Success (0x00) TX octets: 27 TX time: 328 < HCI Command: LE Write Suggested Default Data Length (0x08|0x0024) plen 4 TX octets: 251 TX time: 2120 > HCI Event: Command Complete (0x0e) plen 4 LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1 Status: Success (0x00) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-12Bluetooth: Change initial min and max intervalJonas Holmberg1-2/+2
Use the initial connection interval recommended in Bluetooth Specification v4.2 (30ms - 50ms). Signed-off-by: Jonas Holmberg <jonashg@axis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix wrong New Settings event when closing HCI User ChannelMarcel Holtmann1-0/+1
When closing HCI User Channel, the New Settings event was send out to inform about changed settings. However such event is wrong since the exclusive HCI User Channel access is active until the Index Added event has been sent. @ USER Close: test @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections = Close Index: 00:14:EF:22:04:12 @ MGMT Event: Index Added (0x0004) plen 0 Calling __mgmt_power_off from hci_dev_do_close requires an extra check for an active HCI User Channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-18Bluetooth: Add debugfs fields for hardware and firmware infoMarcel Holtmann1-0/+24
Some Bluetooth controllers allow for reading hardware and firmware related vendor specific infos. If they are available, then they can be exposed via debugfs now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann1-15/+13
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-05-13Bluetooth: fix power_on vs close raceJiri Slaby1-2/+2
With all the latest fixes applied, I am still able to reproduce this (and other) warning(s): WARNING: CPU: 1 PID: 19684 at ../kernel/workqueue.c:4092 destroy_workqueue+0x70a/0x770() ... Call Trace: [<ffffffff819fee81>] ? dump_stack+0xb3/0x112 [<ffffffff8117377e>] ? warn_slowpath_common+0xde/0x140 [<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770 [<ffffffff811739ae>] ? warn_slowpath_null+0x2e/0x40 [<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770 [<ffffffffa0c944c9>] ? hci_unregister_dev+0x2a9/0x720 [bluetooth] [<ffffffffa0b301db>] ? vhci_release+0x7b/0xf0 [hci_vhci] [<ffffffffa0b30160>] ? vhci_flush+0x50/0x50 [hci_vhci] [<ffffffff8117cd73>] ? do_exit+0x863/0x2b90 This is due to race present in the hci_unregister_dev path. hdev->power_on work races with hci_dev_do_close. One tries to open, the other tries to close, leading to warning like the above. (Another example is a warning in kobject_get or kobject_put depending on who wins the race.) Fix this by switching those two racers to ensure hdev->power_on never triggers while hci_dev_do_close is in progress. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_core: cancel power off delayed work properlyWei-Ning Huang1-0/+1
When the HCI_AUTO_OFF flag is cleared, the power_off delayed work need to be cancel or HCI will be powered off even if it's managed. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Use managed version of led_trigger_register in LED triggerHeiner Kallweit1-2/+0
Recently a managed version of led_trigger_register was introduced. Using devm_led_trigger_register allows to simplify the LED trigger code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit1-0/+8
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-20Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skbDouglas Anderson1-2/+4
In commit 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") we squashed down the size of the structure by using a union with the assumption that all users would use the flag to determine whether we had a req_complete or a req_complete_skb. Unfortunately we had a case in hci_req_cmd_complete() where we weren't looking at the flag. This can result in a situation where we might be storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or vice versa. During some testing I found at least one case where the function hci_req_sync_complete() was called improperly because the kernel thought that it didn't require an SKB. Looking through the stack in kgdb I found that it was called by hci_event_packet() and that hci_event_packet() had both of its locals "req_complete" and "req_complete_skb" pointing to the same place: both to hci_req_sync_complete(). Let's make sure we always check the flag. For more details on debugging done, see <http://crbug.com/588288>. Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-20Bluetooth: use list_for_each_entry*Geliang Tang1-5/+3
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Clean up current advertising instance trackingJohan Hedberg1-4/+8
We can simplify a lot of code by making sure hdev->cur_adv_instance is always up-to-date. This allows e.g. the removal of the get_current_adv_instance() helper function and the special HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00 explicit in the various calls where advertising instances aren't enabled, e.g. when HCI_ADVERTISING is set or we've just finished enabling LE. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform HCI update for power on synchronouslyJohan Hedberg1-5/+16
The request to update HCI during power on is always coming either from hdev->req_workqueue or through an ioctl, so it's safe to use hci_req_sync for it. This way we also eliminate potential races with incoming mgmt commands or other actions while powering on. Part of this refactoring is the splitting of mgmt_powered() into mgmt_power_on() and __mgmt_power_off() functions. The main reason is the different requirements as far as hdev locking is concerned, as highlighted with the __ prefix of the power off API. Since the power on in the case of clearing the AUTO_OFF flag cannot be done synchronously in the set_powered mgmt handler, the hci_power_on work callback is extended to cover this (which also simplifies the set_powered helper a lot). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable timeout behind hdev->req_workqueueJohan Hedberg1-13/+0
Since the other discoverable changes are behind req_workqueue now it only makes sense to move the discoverable timeout there as well. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move advertising instance management to hci_request.cJohan Hedberg1-18/+1
This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Clean up hci_core codePrasanna Karthik1-3/+4
Fix errors reported by checkpatch. - ERROR: spaces required around that ':' (ctx:VxW) - ERROR: open brace '{' following function declarations go on the next line Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Simplify request cleanup codeJohan Hedberg1-3/+1
The hci_req_sync_cancel() is just as much related to the request cleanup as hci_request_cancel_all() is. Just move the former into the latter and do the cleanup from a single place in hci_dev_do_close(). The important thing is to avoid deadlocks by holding the req_sync lock: previously hci_request_cancel_all was done right after releasing the lock and with this patch it's right before taking it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add error return value to hci_req_sync callbackJohan Hedberg1-13/+32
In some circumstances it may be useful to abort the request through checks done in the request callback. To make the feature possible this patch changes the return value of the request callback from void to int and aborts the request if a non-zero value is returned. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Move LE scan disable/restart behind req_workqueueJohan Hedberg1-168/+0
To avoid any risks of races, place also these LE scan modification work callbacks behind the same work queue as the other LE scan changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add HCI status return parameter to hci_req_sync()Johan Hedberg1-13/+13
In some cases it may be important to get the exact HCI status rather than the converted HCI-to-errno value. Add an optional return parameter to the hci_req_sync() API to allow for this. Since there are no good HCI translation candidates for cancelation and timeout, use the "unknown" status code for those cases. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add stubs for synchronous HCI request functionalityJohan Hedberg1-0/+4
Prepare hci_request.c to have code for doing synchronous HCI requests, such as LE scanning or advertising changes. The necessary work callbacks will be set up in hci_request_setup() and cleaned up in hci_request_cancel_all(). The former is used when an HCI device get registered, and the latter each time it is powered off (or unregistered). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.