aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-08Bluetooth: fix conding style issues all over the treeGustavo F. Padovan1-27/+22
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-03Bluetooth: Don't force DISCOVERY_STOPPED state in inquiry_cache_flushAndre Guedes1-1/+0
We are not supposed to force DISCOVERY_STOPPED in inquiry_cache_flush because we may break the discovery state machine. For instance, during interleaved discovery, when we are about to start inquiry, the state machine forcibly goes to DISCOVERY_STOPPED while it should stay in DISCOVERY_FINDING state. This problem results in unexpected behaviors such as sending two mgmt_discovering events to userspace (when only one event is expected) and Stop Discovery failures. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-01Bluetooth: Fix init sequence for some CSR based controllersJohan Hedberg1-1/+21
Some CSR controllers will generate a spontaneous reset during init and just eat up any pending command without sending a command complete for it. This patch solves the issue by just resending whatever was the last sent command. hci_send_cmd is not used since we need to bypass all other commands in the send queue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-29Bluetooth: change min_t() cast in hci_reassembly()Dan Carpenter1-1/+1
"count" is type int so the cast to __u16 truncates the high bits away and triggers a Smatch static checker warning. It looks like a high value of count could cause a forever loop, but I didn't follow it through to see if count is capped somewhere. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Add legacy pairing info to dev_found eventsJohan Hedberg1-1/+7
This patch makes sure that legacy pairing vs SSP infomation gets properly propageted to the device_found events in the form of the legacy pairing flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix clearing of dev_class when powering downJohan Hedberg1-0/+1
We should assume a value of 0 for the device class when powered off. The appropriate place to do this is in hci_dev_do_close(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix EIR data clearing when powering offJohan Hedberg1-0/+2
When powering off we should assume that the EIR data isn't valid anymore. This patch makes sure it gets cleared in hci_dev_do_close and thereby ensures that a correct new EIR is recreated when powering on again. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix two minor style issues in HCI codeMarcel Holtmann1-1/+1
WARNING: min() should probably be min_t(__u16, scb->expect, count) + len = min(scb->expect, (__u16)count); WARNING: Statements terminations use 1 semicolon + INIT_LIST_HEAD(&conn->chan_list);; Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-21Bluetooth: mgmt: Allow connectable/discoverable changes in off stateJohan Hedberg1-0/+1
This patch makes it possible to toggle the connectable & discoverable settings when powered off. Two new hdev->dev_flags flags are added to track what the scan mode should be when the device is finally powered on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: Don't send New Settings event during setup power downMarcel Holtmann1-9/+11
When the controller gets brought up for initial setup, it will be brought back down after a timeout. In that case, don't send a New Settings event. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-21Bluetooth: mgmt: Add address type parameter to Discovering eventJohan Hedberg1-2/+1
This patch adds an address type parameter to the Discovering event. The value matches that given to Start/Stop Discovery. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-20Bluetooth: Set supported settings based on enabled HS and/or LEMarcel Holtmann1-5/+0
Since neither High Speed (HS) nor Low Energy (LE) are fully implemented yet, only expose them in supported settings when enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Add support for HCI monitor channelMarcel Holtmann1-3/+10
The HCI monitor channel can be used to monitor all packets and events from the Bluetooth subsystem. The monitor is not bound to any specific HCI device and allows even capturing multiple devices at the same time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Remove HCI notifier handlingMarcel Holtmann1-15/+1
The HCI notifier handling was never used outside of Bluetooth core layer and thus remove it and replace it with direct function calls. Also move the stack internal event generation into the HCI socket layer. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Split sending for HCI raw and control socketsMarcel Holtmann1-2/+2
The sending functions for HCI raw and control sockets have nothing in common except that they iterate over the socket list. Split them into two so they can do their job more efficient. In addition the code becomes more readable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19Bluetooth: Merge INQUIRY and LE_SCAN discovery statesAndre Guedes1-4/+2
This patch merges DISCOVERY_INQUIRY and DISCOVERY_LE_SCAN states into a new state called DISCOVERY_FINDING. From the discovery perspective, we are pretty much worried about to know just if we are finding devices than what exactly phase of "finding devices" (inquiry or LE scan) we are currently running. Besides, to know if the controller is performing inquiry or LE scan we should check HCI_INQUIRY or HCI_LE_SCAN bits in hdev flags. Moreover, merging this two states will simplify the discovery state machine and will keep interleaved discovery implementation simpler. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19Bluetooth: Track discovery typeAndre Guedes1-0/+2
This patch adds to struct discovery_state the field 'type' so that we can track the discovery type the device is performing. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Fix event sending with DISCOVERY_STOPPED stateAndre Guedes1-1/+2
We are not supposed to send mgmt_discovering events if we are transiting from DISCOVERY_STARTING to DISCOVERY_STOPPED state. It doesn't make sense to send mgmt_discovering event once discovery procedure has not been even started. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add address type to mgmt blacklist messagesJohan Hedberg1-4/+4
This patch updates the implmentation for mgmt_block_device and mgmt_unblock_device and their corresponding events to match the latest API specification. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Add hci_le_scan()Andre Guedes1-0/+35
We are not supposed to block in start_discovery() because start_discovery code is running in write() syscall context and this would block the write operation on the mgmt socket. This way, we cannot directly call hci_do_le_scan() to scan LE devices in start_discovery(). To overcome this issue a derefered work (hdev->le_scan) was created so we can properly call hci_do_le_scan(). The helper function hci_le_scan() simply set LE scan parameters and queue hdev->le_scan work. The work is queued on system_long_wq since it can sleep for a few seconds in the worst case (timeout). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add hci_do_le_scan()Andre Guedes1-0/+74
This patch adds to hci_core the hci_do_le_scan function which should be used to scan LE devices. In order to enable LE scan, hci_do_le_scan() sends commands (Set LE Scan Parameters and Set LE Scan Enable) to the controller and waits for its results. If commands were executed successfully a delayed work is scheduled to disable the ongoing scanning after some amount of time. This function blocks. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Minor code refactoringAndre Guedes1-4/+7
This patch does a trivial code refacting in hci_discovery_active. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: LE scan should send Discovering eventsAndre Guedes1-0/+2
Send MGMT Discovering events once LE scan starts/stops so the userspace can track when local adapters are discovering LE devices. This way, we also keep the same behavior of inquiry which sends MGMT Discovering events once inquiry starts/stops even if it is triggered by an external tool (e.g. hcitool). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add missing QUIRK_NO_RESET test to hci_dev_do_closeJohan Hedberg1-1/+2
We should only perform a reset in hci_dev_do_close if the HCI_QUIRK_NO_RESET flag is set (since in such a case a reset will not be performed when initializing the device). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Helper removes duplicated codeAndrei Emeltchenko1-18/+13
Use __check_timout helper to remove duplicated code Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Recalculate sched HCI blk/pkt flow ctrlAndrei Emeltchenko1-6/+79
Split HCI scheduling for block and packet flow control. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add support for notifying userspace of new LTK'sVinicius Costa Gomes1-0/+3
If we want to have proper pairing support over LE we need to inform userspace that a new LTK is available, so userspace can store that key permanently. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Use the updated key structures for handling LTKsVinicius Costa Gomes1-43/+33
This updates all the users of the older way, that was using the link_keys list to store the SMP keys, to use the new way. This includes defining new types for the keys, we have a type for each combination of STK/LTK and Master/Slave. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add new structures for handling SMP Long Term KeysVinicius Costa Gomes1-0/+31
This includes a new list for storing the keys and a new structure used to represent each key. Some notes: authenticated is used to identify that the key may be used to setup a HIGH security link. As the same list is used to store both the STK's and the LTK's the type field is used so we can separate between those two types of keys and if the key should be used when in the master or slave role. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Use GFP_KERNEL in hci_add_adv_entry()Andre Guedes1-1/+1
This function is not called in interrupt context anymore, so it should use GFP_KERNEL to allocate memory. Signed-off-by: Andre Guedes <aguedespe@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Fix 'enable_hs' typeFabio Estevam1-1/+1
Fix the following build warning: CC [M] net/bluetooth/hci_core.o net/bluetooth/hci_core.c: In function ‘__check_enable_hs’: net/bluetooth/hci_core.c:2587: warning: return from incompatible pointer type module_param in hci_core.c passes 'enable_hs' as bool format, so fix this variable definition type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Sort to-be-resolved devices by RSSI during discoveryJohan Hedberg1-1/+27
This patch makes sure that devices with stronger signal (RSSI closer to 0) are sorted first in the resolve list and will therefore get their names resolved first during device discovery. Since it's more likely that the device the user is trying to discover has a strong signal due to its proximity this ensures that the user gets the "device found" event for it more quickly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Move mgmt related flags from hdev->flags to hdev->dev_flagsJohan Hedberg1-15/+15
There's no point in exposing these to user-space (which is what happens to everything in hdev->flags) so move them to dev_flags instead. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Remove __hci_dev_put/holdDavid Herrmann1-2/+2
Since we remove the owner field of hci_dev hci_dev_put and __hci_dev_put do the same so we can merge them into one function. Same for hci_dev_hold and __hci_dev_hold. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Correctly take hci_dev->dev refcountDavid Herrmann1-1/+1
The hci_dev->dev device structure has an internal refcount. This refcount is used to protect the whole hci_dev object. However, we currently do not use it. Therefore, if someone calls hci_free_dev() we currently immediately destroy the hci_dev object because we never took the device refcount. This even happens if the hci_dev->refcnt is not 0. In fact, the hci_dev->refcnt is totally useless in its current state. Therefore, we simply remove hci_dev->refcnt and instead use hci_dev->dev refcnt. This fixes all the symptoms and also correctly integrates the device structure into our bluetooth bus system. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Remove HCI-owner fieldDavid Herrmann1-2/+1
After unregistering an hci_dev object a bluetooth driver does not have any callbacks in the hci_dev structure left over. Therefore, there is no need to keep a reference to the module. Previously, we needed this to protect the hci-destruct callback. However, this callback is no longer available so we do not need this owner field, anymore. Drivers now call hci_unregister_dev() and they are done with the object. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Make hci-destruct callback optionalDavid Herrmann1-1/+1
Several drivers already provide an empty callback so we can actually make this optional and then remove all those empty callbacks in the drivers. This callback isn't needed at all by most drivers as they can remove their allocated structures on device disconnect and not on hci destruction. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Remove magic number from ACL TOAndrei Emeltchenko1-1/+2
Adds HCI_ACL_TX_TIMEOUT and clear conversion from msec to jiffies Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add name resolving support for mgmt based discoveryJohan Hedberg1-1/+33
This patch adds the necessary logic to perform name lookups after inquiry completes. This is done by checking for entries in the resolve list after each inquiry complete and remote name complete HCI event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Add discovery state trackingJohan Hedberg1-0/+25
This patch adds proper state tracking to the device discovery process. This makes it possible to return appropriate errors when trying to stop a non-active discovery or start discovery when it is already ongoing. Once name resolving is implemented this also makes it possible to know what the right action to do is when a remote name lookup is cancelled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Rename hdev->inq_cache to hdev->discoveryJohan Hedberg1-6/+6
This struct is used for not just inquiry caching but also for general device discovery state tracking so it's better to rename it to something more appropriate. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Flush inquiry cache when starting mgmt triggered inquiryJohan Hedberg1-0/+2
For the remote name state tracking for the management interface to work the cache needs to be flushed whenever inquiry is started. The hci_do_inquiry function is only used by the management interface so by having the flushing done from it ensures that old ioctl based functionality isn't affected. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Return updated name state with hci_inquiry_cache_updateJohan Hedberg1-2/+7
If user-space has already confirmed the name for a remote device we shouldn't request confirmation again. The simplest way to do this is to return the name state from hci_inquiry_cache_update (if it is anything else than unknown then we do not need confirmation from user-space). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Add initial mgmt_confirm_name supportJohan Hedberg1-11/+47
This patch adds initial support for mgmt_confirm_name. It adds the necessary tracking of the name state by extending the inquiry cache. The actual name resolving operation (to be done once inquiry is finished) is not yet part of this patch. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Convert inquiry cache to use standard list typesJohan Hedberg1-14/+17
This makes it possible to use the convenience functions provided for standard kernel list types and it also makes it easier to extend the use of the cache for the management interface where e.g. name resolving control will be needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2011-12-23Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"Gustavo F. Padovan1-1/+1
This reverts commit e1b6eb3ccb0c2a34302a9fd87dd15d7b86337f23. This was causing a delay of 10 seconds in the resume process of a Thinkpad laptop. I'm afraid this could affect more devices once 3.2 is released. Reported-by: Tomáš Janoušek <tomi@nomi.cz> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22Bluetooth: Don't disable interrupt when locking the queueGustavo F. Padovan1-2/+2
We run everything in process context now. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22Bluetooth: remove *_bh usage from hci_dev_list and hci_cb_listGustavo F. Padovan1-12/+12
They don't need to disable interrupts anymore, we only run in process context now. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.