aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-06-26Bluetooth: Shutdown controller after workqueues are flushed or cancelledKai-Heng Feng1-8/+8
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working: [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110) Or kernel panics because other workqueues already freed skb: [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Add ncmd=0 recovery handlingManish Mandlik1-0/+22
During command status or command complete event, the controller may set ncmd=0 indicating that it is not accepting any more commands. In such a case, host holds off sending any more commands to the controller. If the controller doesn't recover from such condition, host will wait forever, until the user decides that the Bluetooth is broken and may power cycles the Bluetooth. This patch triggers the hardware error to reset the controller and driver when it gets into such state as there is no other wat out. Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+6
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02Bluetooth: Fix spelling mistakesZheng Yongjun1-4/+4
Fix some spelling mistakes in comments: udpate ==> update retreive ==> retrieve accidentially ==> accidentally correspondig ==> corresponding adddress ==> address estabilish ==> establish commplete ==> complete Unkown ==> Unknown triggerd ==> triggered transtion ==> transition Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Bluetooth: fix the erroneous flush_work() orderLin Ma1-1/+6
In the cleanup routine for failed initialization of HCI device, the flush_work(&hdev->rx_work) need to be finished before the flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can possibly invoke new cmd_work and cause a bug, like double free, in late processings. This was assigned CVE-2021-3564. This patch reorder the flush_work() to fix this bug. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Hao Xiong <mart1n@zju.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-04-08Bluetooth: Set defaults for le_scan_{int,window}_adv_monitorMarcel Holtmann1-0/+2
The le_scan_{int,window}_adv_monitor settings have not been set with a sensible default. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-04-06Bluetooth: Add support for reading AOSP vendor capabilitiesMarcel Holtmann1-0/+3
When drivers indicate support for AOSP vendor extension, initialize them and read its capabilities. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-01-29Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirkHans de Goede1-7/+11
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume. These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state. This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: btusb: fix memory leak on suspend and resumeVamshi K Sthambamkadi1-1/+2
kmemleak report: unreferenced object 0xffff9b1127f00500 (size 208): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`.............. backtrace: [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480 [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b1125c6ee00 (size 512): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270 [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330 [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90 [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b112b395788 (size 8): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 8 bytes): 20 00 00 00 00 00 04 00 ....... backtrace: [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460 [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb] [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb] [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth] [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 In pm sleep-resume context, while the btusb device rebinds, it enters hci_unregister_dev(), whilst there is a possibility of hdev receiving PM_POST_SUSPEND suspend_notifier event, leading to generation of msg frames. When hci_unregister_dev() completes, i.e. hdev context is destroyed/freed, those intermittently sent msg frames cause memory leak. BUG details: Below is stack trace of thread that enters hci_unregister_dev(), marks the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier lock - refer unregister_pm_notifier(). hci_unregister_dev+0xa5/0x320 [bluetoot] btusb_disconnect+0x68/0x150 [btusb] usb_unbind_interface+0x77/0x250 ? kernfs_remove_by_name_ns+0x75/0xa0 device_release_driver_internal+0xfe/0x1 device_release_driver+0x12/0x20 bus_remove_device+0xe1/0x150 device_del+0x192/0x3e0 ? usb_remove_ep_devs+0x1f/0x30 usb_disable_device+0x92/0x1b0 usb_disconnect+0xc2/0x270 hub_event+0x9f6/0x15d0 ? rpm_idle+0x23/0x360 ? rpm_idle+0x26b/0x360 process_one_work+0x209/0x3b0 worker_thread+0x34/0x400 ? process_one_work+0x3b0/0x3b0 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Below is stack trace of thread executing hci_suspend_notifier() which processes the PM_POST_SUSPEND event, while the unbinding thread is waiting on lock. hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth] blocking_notifier_call_chain+0x69/0x90 pm_notifier_call_chain+0x1a/0x20 pm_suspend.cold.9+0x334/0x352 state_store+0x84/0xf0 kobj_attr_store+0x12/0x20 sysfs_kf_write+0x3b/0x40 kernfs_fop_write+0xda/0x1c0 vfs_write+0xbb/0x250 ksys_write+0x61/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER is set. Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: Put HCI device if inquiry procedure interruptsPan Bian1-2/+4
Jump to the label done to decrement the reference count of HCI device hdev on path that the Inquiry procedure is interrupted. Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT remove monitorArchie Pusaka1-23/+96
Implements the monitor removal functionality for advertising monitor offloading to MSFT controllers. Supply handle = 0 to remove all monitors. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT add monitorArchie Pusaka1-9/+46
Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-07Bluetooth: Query LE tx power on startupDaniel Winkler1-0/+8
Queries tx power via HCI_LE_Read_Transmit_Power command when the hci device is initialized, and stores resulting min/max LE power in hdev struct. If command isn't available (< BT5 support), min/max values both default to HCI_TX_POWER_INVALID. This patch is manually verified by ensuring BT5 devices correctly query and receive controller tx power range. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Use intervals and tx power from mgmt cmdsDaniel Winkler1-3/+5
This patch takes the min/max intervals and tx power optionally provided in mgmt interface, stores them in the advertisement struct, and uses them when configuring the hci requests. While tx power is not used if extended advertising is unavailable, software rotation will use the min and max advertising intervals specified by the client. This change is validated manually by ensuring the min/max intervals are propagated to the controller on both hatch (extended advertising) and kukui (no extended advertising) chromebooks, and that tx power is propagated correctly on hatch. These tests are performed with multiple advertisements simultaneously. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Add helper to set adv dataDaniel Winkler1-0/+31
We wish to handle advertising data separately from advertising parameters in our new MGMT requests. This change adds a helper that allows the advertising data and scan response to be updated for an existing advertising instance. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Add toggle to switch off interleave scanHoward Chung1-0/+1
This patch add a configurable parameter to switch off the interleave scan feature. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Interleave with allowlist scanHoward Chung1-0/+3
This patch implements the interleaving between allowlist scan and no-filter scan. It'll be used to save power when at least one monitor is registered and at least one pending connection or one device to be scanned for. The durations of the allowlist scan and the no-filter scan are controlled by MGMT command: Set Default System Configuration. The default values are set randomly for now. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix attempting to set RPA timeout when unsupportedEdward Vear1-1/+1
During controller initialization, an LE Set RPA Timeout command is sent to the controller if supported. However, the value checked to determine if the command is supported is incorrect. Page 1921 of the Bluetooth Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands field corresponds to the LE Set RPA Timeout command, but currently bit 6 of octet 35 is checked. This patch checks the correct value instead. This issue led to the error seen in the following btmon output during initialization of an adapter (rtl8761b) and prevented initialization from completing. < HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2 Timeout: 900 seconds > HCI Event: Command Complete (0x0e) plen 4 LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2 Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a) = Close Index: 00:E0:4C:6B:E5:03 The error did not appear when running with this patch. Signed-off-by: Edward Vear <edwardvear@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-09-29Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-nextDavid S. Miller1-2/+39
Johan Hedberg says: ==================== pull request: bluetooth-next 2020-09-29 Here's the main bluetooth-next pull request for 5.10: - Multiple fixes to suspend/resume handling - Added mgmt events for controller suspend/resume state - Improved extended advertising support - btintel: Enhanced support for next generation controllers - Added Qualcomm Bluetooth SoC WCN6855 support - Several other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20Bluetooth: Update Adv monitor count upon removalMiao-chen Chou1-0/+2
This fixes the count of Adv monitor upon monitor removal. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-remove command on one console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-18net: bluetooth: delete duplicated wordsRandy Dunlap1-1/+1
Drop repeated words in net/bluetooth/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-13Bluetooth: Emit controller suspend and resume eventsAbhishek Pandit-Subedi1-1/+25
Emit controller suspend and resume events when we are ready for suspend and we've resumed from suspend. The controller suspend event will report whatever suspend state was successfully entered. The controller resume event will check the first HCI event that was received after we finished preparing for suspend and, if it was a connection event, store the address of the peer that caused the event. If it was not a connection event, we mark the wake reason as an unexpected event. Here is a sample btmon trace with these events: @ MGMT Event: Controller Suspended (0x002d) plen 1 Suspend state: Page scanning and/or passive scanning (2) @ MGMT Event: Controller Resumed (0x002e) plen 8 Wake reason: Remote wake due to peer device connection (2) LE Address: CD:F3:CD:13:C5:9A (OUI CD-F3-CD) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Report num supported adv instances for hw offloadingDaniel Winkler1-1/+1
Here we make sure we properly report the number of supported advertising slots when we are using hardware offloading. If no hardware offloading is available, we default this value to HCI_MAX_ADV_INSTANCES for use in software rotation as before. This change has been tested on kukui (no ext adv) and hatch (ext adv) chromebooks by verifying "SupportedInstances" shows 5 (the default) and 6 (slots supported by controller), respectively. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Re-order clearing suspend tasksAbhishek Pandit-Subedi1-1/+1
Unregister_pm_notifier is a blocking call so suspend tasks should be cleared beforehand. Otherwise, the notifier will wait for completion before returning (and we encounter a 2s timeout on resume). Fixes: 0e9952804ec9c8 (Bluetooth: Clear suspend tasks on unregister) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-01Bluetooth: Clear suspend tasks on unregisterAbhishek Pandit-Subedi1-0/+11
While unregistering, make sure to clear the suspend tasks before cancelling the work. If the unregister is called during resume from suspend, this will unnecessarily add 2s to the resume time otherwise. Fixes: 4e8c36c3b0d73d (Bluetooth: Fix suspend notifier race) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Enable RPA TimeoutSathish Narasimman1-0/+8
Enable RPA timeout during bluetooth initialization. The RPA timeout value is used from hdev, which initialized from debug_fs Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Translate additional address type correctlyMarcel Holtmann1-0/+9
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: Fix suspend notifier raceAbhishek Pandit-Subedi1-2/+3
Unregister from suspend notifications and cancel suspend preparations before running hci_dev_do_close. Otherwise, the suspend notifier may race with unregister and cause cmd_timeout even after hdev has been freed. Below is the trace from when this panic was seen: [ 832.578518] Bluetooth: hci_core.c:hci_cmd_timeout() hci0: command 0x0c05 tx timeout [ 832.586200] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 832.586203] #PF: supervisor read access in kernel mode [ 832.586205] #PF: error_code(0x0000) - not-present page [ 832.586206] PGD 0 P4D 0 [ 832.586210] PM: suspend exit [ 832.608870] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 832.613232] CPU: 3 PID: 10755 Comm: kworker/3:7 Not tainted 5.4.44-04894-g1e9dbb96a161 #1 [ 832.630036] Workqueue: events hci_cmd_timeout [bluetooth] [ 832.630046] RIP: 0010:__queue_work+0xf0/0x374 [ 832.630051] RSP: 0018:ffff9b5285f1fdf8 EFLAGS: 00010046 [ 832.674033] RAX: ffff8a97681bac00 RBX: 0000000000000000 RCX: ffff8a976a000600 [ 832.681162] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8a976a000748 [ 832.688289] RBP: ffff9b5285f1fe38 R08: 0000000000000000 R09: ffff8a97681bac00 [ 832.695418] R10: 0000000000000002 R11: ffff8a976a0006d8 R12: ffff8a9745107600 [ 832.698045] usb 1-6: new full-speed USB device number 119 using xhci_hcd [ 832.702547] R13: ffff8a9673658850 R14: 0000000000000040 R15: 000000000000001e [ 832.702549] FS: 0000000000000000(0000) GS:ffff8a976af80000(0000) knlGS:0000000000000000 [ 832.702550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 832.702550] CR2: 0000000000000000 CR3: 000000010415a000 CR4: 00000000003406e0 [ 832.702551] Call Trace: [ 832.702558] queue_work_on+0x3f/0x68 [ 832.702562] process_one_work+0x1db/0x396 [ 832.747397] worker_thread+0x216/0x375 [ 832.751147] kthread+0x138/0x140 [ 832.754377] ? pr_cont_work+0x58/0x58 [ 832.758037] ? kthread_blkcg+0x2e/0x2e [ 832.761787] ret_from_fork+0x22/0x40 [ 832.846191] ---[ end trace fa93f466da517212 ]--- Fixes: 9952d90ea2885 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: Return NOTIFY_DONE for hci_suspend_notifierMax Chou1-1/+1
The original return is NOTIFY_STOP, but notifier_call_chain would stop the future call for register_pm_notifier even registered on other Kernel modules with the same priority which value is zero. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllersIsmael Ferreras Morezuelas1-2/+4
For some reason they tend to squat on the very first CSR/ Cambridge Silicon Radio VID/PID instead of paying fees. This is an extremely common problem; the issue goes as back as 2013 and these devices are only getting more popular, even rebranded by reputable vendors and sold by retailers everywhere. So, at this point in time there are hundreds of modern dongles reusing the ID of what originally was an early Bluetooth 1.1 controller. Linux is the only place where they don't work due to spotty checks in our detection code. It only covered a minimum subset. So what's the big idea? Take advantage of the fact that all CSR chips report the same internal version as both the LMP sub-version and HCI revision number. It always matches, couple that with the manufacturer code, that rarely lies, and we now have a good idea of who is who. Additionally, by compiling a list of user-reported HCI/lsusb dumps, and searching around for legit CSR dongles in similar product ranges we can find what CSR BlueCore firmware supported which Bluetooth versions. That way we can narrow down ranges of fakes for each of them. e.g. Real CSR dongles with LMP subversion 0x73 are old enough that support BT 1.1 only; so it's a dead giveaway when some third-party BT 4.0 dongle reuses it. So, to sum things up; there are multiple classes of fake controllers reusing the same 0A12:0001 VID/PID. This has been broken for a while. Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891 IC markings on 0x7558: FR3191AHAL 749H15143 (???) https://bugzilla.kernel.org/show_bug.cgi?id=60824 Fixes: 81cac64ba258ae (Deal with USB devices that are faking CSR vendor) Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com> Tested-by: Mike Johnson <yuyuyak@gmail.com> Tested-by: Ricardo Rodrigues <ekatonb@gmail.com> Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com> Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: Fix kernel oops triggered by hci_adv_monitors_clear()Miao-chen Chou1-2/+0
This fixes the kernel oops by removing unnecessary background scan update from hci_adv_monitors_clear() which shouldn't invoke any work queue. The following test was performed. - Run "rmmod btusb" and verify that no kernel oops is triggered. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: Adding a configurable autoconnect timeoutAlain Michaud1-0/+1
This patch adds a configurable LE autoconnect timeout. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-18Bluetooth: Update background scan and report device based on advertisement monitorsMiao-chen Chou1-0/+13
This calls hci_update_background_scan() when there is any update on the advertisement monitors. If there is at least one advertisement monitor, the filtering policy of scan parameters should be 0x00. This also reports device found mgmt events if there is at least one monitor. The following cases were tested with btmgmt advmon-* commands. (1) add a ADV monitor and observe that the passive scanning is triggered. (2) remove the last ADV monitor and observe that the passive scanning is terminated. (3) with a LE peripheral paired, repeat (1) and observe the passive scanning continues. (4) with a LE peripheral paired, repeat (2) and observe the passive scanning continues. (5) with a ADV monitor, suspend/resume the host and observe the passive scanning continues. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_REMOVE_ADV_MONITORMiao-chen Chou1-0/+31
This adds the request handler of MGMT_OP_REMOVE_ADV_MONITOR command. Note that the controller-based monitoring is not yet in place. This removes the internal monitor(s) without sending HCI traffic, so the request returns immediately. The following test was performed. - Issue btmgmt advmon-remove with valid and invalid handles. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_ADD_ADV_PATTERNS_MONITORMiao-chen Chou1-0/+40
This adds the request handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR command. Note that the controller-based monitoring is not yet in place. This tracks the content of the monitor without sending HCI traffic, so the request returns immediately. The following manual test was performed. - Issue btmgmt advmon-add with valid and invalid inputs. - Issue btmgmt advmon-add more the allowed number of monitors. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURESMiao-chen Chou1-1/+9
This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES command. Since the controller-based monitoring is not yet in place, this report only the supported features but not the enabled features. The following test was performed. - Issuing btmgmt advmon-features. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Replace wakeable list with flagAbhishek Pandit-Subedi1-1/+0
Since the classic device list now supports flags, convert the wakeable list into a flag on the existing device list. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add bdaddr_list_with_flags for classic whitelistAbhishek Pandit-Subedi1-0/+58
In order to more easily add device flags to classic devices, create a new type of bdaddr_list that supports setting flags. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: centralize default value initialization.Alain Michaud1-1/+13
This patch centralized the initialization of default parameters. This is required to allow clients to more easily customize the default system parameters. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connectionsAlain Michaud1-0/+1
This change adds support for reporting the BT_PKT_STATUS to the socket CMSG data to allow the implementation of a packet loss correction on erroneous data received on the SCO socket. The patch was partially developed by Marcel Holtmann and validated by Hsin-yu Chao. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-08Bluetooth: Allow suspend even when preparation has failedAbhishek Pandit-Subedi1-7/+10
It is preferable to allow suspend even when Bluetooth has problems preparing for sleep. When Bluetooth fails to finish preparing for suspend, log the error and allow the suspend notifier to continue instead. To also make it clearer why suspend failed, change bt_dev_dbg to bt_dev_err when handling the suspend timeout. Fixes: dd522a7429b07e ("Bluetooth: Handle LE devices during suspend") Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Add hook for driver to prevent wake from suspendAbhishek Pandit-Subedi1-2/+4
Let drivers have a hook to disable configuring scanning during suspend. Drivers should use the device_may_wakeup function call to determine whether hci should be configured for wakeup. For example, an implementation for btusb may look like the following: bool btusb_prevent_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return !device_may_wakeup(&data->udev->dev); } Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Rename BT_SUSPEND_COMPLETEAbhishek Pandit-Subedi1-1/+1
Renamed BT_SUSPEND_COMPLETE to BT_SUSPEND_CONFIGURE_WAKE since it sets up the event filter and whitelist for wake-up. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-16Bluetooth: Enhanced Connection Complete event belongs to LL PrivacyMarcel Holtmann1-8/+0
The Enhanced Connection Complete event is use in conjunction with LL Privacy and not Extended Advertising. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Enable LE Enhanced Connection Complete event.Marcel Holtmann1-0/+8
In case LL Privacy is supported by the controller, it is also a good idea to use the LE Enhanced Connection Complete event for getting all information about the new connection and its addresses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for Read Local Simple Pairing OptionsMarcel Holtmann1-0/+4
With the Read Local Simple Pairing Options command it is possible to retrieve the support for max encryption key size supported by the controller and also if the controller correctly verifies the ECDH public key during pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add framework for Microsoft vendor extensionMiao-chen Chou1-0/+5
Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03Bluetooth: Prioritize SCO trafficAbhishek Pandit-Subedi1-49/+57
When scheduling TX packets, send all SCO/eSCO packets first, check for pending SCO/eSCO packets after every ACL/LE packet and send them if any are pending. This is done to make sure that we can meet SCO deadlines on slow interfaces like UART. If we were to queue up multiple ACL packets without checking for a SCO packet, we might miss the SCO timing. For example: The time it takes to send a maximum size ACL packet (1024 bytes): t = 10/8 * 1024 bytes * 8 bits/byte * 1 packet / baudrate where 10/8 is uart overhead due to start/stop bits per byte Replace t = 3.75ms (SCO deadline), which gives us a baudrate of 2730666. At a baudrate of 3000000, if we didn't check for SCO packets within 1024 bytes, we would miss the 3.75ms timing window. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-23Bluetooth: Restore running state if suspend failsAbhishek Pandit-Subedi1-19/+20
If Bluetooth fails to enter the suspended state correctly, restore the state to running (re-enabling scans). PM_POST_SUSPEND is only sent to notifiers that successfully return from PM_PREPARE_SUSPEND notification so we should recover gracefully if it fails. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Handle BR/EDR devices during suspendAbhishek Pandit-Subedi1-3/+19
To handle BR/EDR devices, we first disable page scan and disconnect all connected devices. Once that is complete, we add event filters (for devices that can wake the system) and re-enable page scan. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.