aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-30Bluetooth: Add new quirk for non-persistent setup settingsSean Wang1-1/+2
Add a new quirk HCI_QUIRK_NON_PERSISTENT_SETUP allowing that a quirk that runs setup() after every open() and not just after the first open(). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement secondary advertising on different PHYsJaganath Kanakkassery2-11/+46
This patch adds support for advertising in primary and secondary channel on different PHYs. User can add the phy preference in the flag based on which phy type will be added in extended advertising parameter would be set. @ MGMT Command: Add Advertising (0x003e) plen 11 Instance: 1 Flags: 0x00000200 Advertise in CODED on Secondary channel Duration: 0 Timeout: 0 Advertising data length: 0 Scan response length: 0 < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0000 Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE Coded (0x03) Secondary max skip: 0x00 Secondary PHY: LE Coded (0x03) SID: 0x00 Scan request notifications: Disabled (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Handle ADv set terminated eventJaganath Kanakkassery2-3/+48
This event comes after connection complete event for incoming connections. Since we now have different random address for each instance, conn resp address is assigned from this event. As of now only connection part is handled as we are not enabling duration or max num of events while starting ext adv. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement Set ADV set random addressJaganath Kanakkassery6-3/+223
This basically sets the random address for the adv instance Random address can be set only if the instance is created which is done in Set ext adv param. Random address and rpa expire timer and flags have been added to adv instance which will be used when the respective instance is scheduled. This introduces a hci_get_random_address() which returns the own address type and random address (rpa or nrpa) based on the instance flags and hdev flags. New function is required since own address type should be known before setting adv params but address can be set only after setting params. < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Use ext adv for directed advJaganath Kanakkassery1-22/+45
This patch does extended advertising for directed advertising if the controller supportes. Instance 0 is used for directed advertising. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement disable and removal of adv instanceJaganath Kanakkassery4-2/+27
If ext adv is enabled then use ext adv to disable as well. Also remove the adv set during LE disable. < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Use Set ext adv/scan rsp data if controller supportsJaganath Kanakkassery4-34/+108
This patch implements Set Ext Adv data and Set Ext Scan rsp data if controller support extended advertising. Currently the operation is set as Complete data and fragment preference is set as no fragment < HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35 Handle: 0x00 Operation: Complete extended advertising data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x15 16-bit Service UUIDs (complete): 2 entries Heart Rate (0x180d) Battery Service (0x180f) Name (complete): Test LE Company: Google (224) Data: 0102 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Data (0x08|0x0037) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Impmlement extended adv enableJaganath Kanakkassery5-25/+245
This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Read no of adv sets during initJaganath Kanakkassery2-2/+32
This patch reads the number of advertising sets in the controller during init and save it in hdev. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Use selected PHYs in extended connectJaganath Kanakkassery1-16/+45
Use the selected PHYs by Set PHY Configuration management command in extended create connection. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Handle extended ADV PDU typesJaganath Kanakkassery1-13/+37
This patch defines the extended ADV types and handle it in ADV report. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Set Scan PHYs based on selected PHYs by userJaganath Kanakkassery1-9/+28
Use the PHYs selected in Set Phy Configuration management command while scanning. < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 13 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x05 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Entry 1: LE Coded Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6 Extended scan: Enabled (0x01) Filter duplicates: Enabled (0x01) Duration: 0 msec (0x0000) Period: 0.00 sec (0x0000) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement PHY changed eventJaganath Kanakkassery2-1/+25
This defines and implement phy changed event and send it to user whenever selected PHYs changes using SET_PHY_CONFIGURATION. This will be also trigerred when BREDR pkt_type is changed using the legacy ioctl HCISETPTYPE. @ MGMT Command: Set PHY Configuration (0x0045) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX < HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 All PHYs preference: 0x00 TX PHYs preference: 0x07 LE 1M LE 2M LE Coded RX PHYs preference: 0x07 LE 1M LE 2M LE Coded > HCI Event: Command Complete (0x0e) plen 4 LE Set Default PHY (0x08|0x0031) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 3 Set PHY Configuration (0x0045) plen 0 Status: Success (0x00) @ MGMT Event: PHY Configuration Changed (0x0026) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement Set PHY Confguration commandJaganath Kanakkassery2-0/+208
This enables user to set phys which will be used in all subsequent connections. Also host will use the same in LE scanning as well. @ MGMT Command: Set PHY Configuration (0x0045) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX < HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 All PHYs preference: 0x00 TX PHYs preference: 0x07 LE 1M LE 2M LE Coded RX PHYs preference: 0x07 LE 1M LE 2M LE Coded > HCI Event: Command Complete (0x0e) plen 4 LE Set Default PHY (0x08|0x0031) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 3 Set PHY Configuration (0x0045) plen 0 Status: Success (0x00) @ MGMT Event: PHY Configuration Changed (0x0026) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement Get PHY Configuration mgmt commandJaganath Kanakkassery1-0/+145
This commands basically retrieve the supported packet types of BREDR and supported PHYs of the controller. BR_1M_1SLOT, LE_1M_TX and LE_1M_RX would be supported by default. Other PHYs are supported based on the local features. Also this sets PHY_CONFIGURATION bit in supported settings. @ MGMT Command: Get PHY Configuration (0x0044) plen 0 @ MGMT Event: Command Complete (0x0001) plen 15 Get PHY Configuration (0x0044) plen 12 Status: Success (0x00) Supported PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Configurable PHYs: 0x79fe BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 2M TX LE 2M RX LE CODED TX LE CODED RX Selected PHYs: 0x07ff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Define PHY flags in hdev and set 1M as defaultJaganath Kanakkassery1-4/+5
1M is mandatory to be supported by LE controllers and the same would be set in power on. This patch defines hdev flags for LE PHYs and set 1M to default. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-18Bluetooth: Use lock_sock_nested in bt_accept_enqueuePhilipp Puschmann1-1/+1
Fixes this warning that was provoked by a pairing: [60258.016221] WARNING: possible recursive locking detected [60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G O [60258.027146] -------------------------------------------- [60258.032464] kworker/u5:0/70 is trying to acquire lock: [60258.037609] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74 [60258.046863] [60258.046863] but task is already holding lock: [60258.052704] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.062905] [60258.062905] other info that might help us debug this: [60258.069441] Possible unsafe locking scenario: [60258.069441] [60258.075368] CPU0 [60258.077821] ---- [60258.080272] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.085510] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.090748] [60258.090748] *** DEADLOCK *** [60258.090748] [60258.096676] May be due to missing lock nesting notation [60258.096676] [60258.103472] 5 locks held by kworker/u5:0/70: [60258.107747] #0: ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.117263] #1: ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.126942] #2: (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8 [60258.134806] #3: (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8 [60258.142410] #4: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.153043] [60258.153043] stack backtrace: [60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G O 4.15.0-RD1812-BSP #1 [60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [60258.172485] Workqueue: hci0 hci_rx_work [60258.176331] Backtrace: [60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c) [60258.186379] r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000 [60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc) [60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4) [60258.207144] r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c [60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98) [60258.222655] r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013 [60258.230491] r4:00000000 [60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88) [60258.240970] r7:00000000 r6:b796e870 r5:00000001 r4:b796e800 [60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74) [60258.255004] r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800 [60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88) [60258.271117] r5:b796e800 r4:ba7d2000 [60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8) [60258.283933] r5:00000001 r4:ba6dce00 [60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8) [60258.295800] r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004 [60258.303635] r4:bb05d008 [60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214) [60258.314805] r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80 [60258.322641] r4:ba6dce00 [60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8) [60258.333374] r6:80e5743c r5:bb05d7c8 r4:b7957a80 [60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc) [60258.346018] r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00 [60258.353853] r4:bb05d7c8 [60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc) [60258.364503] r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800 [60258.372338] r4:baaa5d00 [60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160) [60258.382295] r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0 [60258.390130] r4:ba831080 [60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20) [60258.399915] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4 [60258.407751] r4:baaa8ac0 r3:baabe000 Signed-off-by: Philipp Puschmann <pp@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-16Bluetooth: avoid killing an already killed socketSudip Mukherjee1-1/+2
slub debug reported: [ 440.648642] ============================================================================= [ 440.648649] BUG kmalloc-1024 (Tainted: G BU O ): Poison overwritten [ 440.648651] ----------------------------------------------------------------------------- [ 440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b [ 440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047 [ 440.648671] ___slab_alloc.constprop.24+0x1fc/0x292 [ 440.648675] __slab_alloc.isra.18.constprop.23+0x1c/0x25 [ 440.648677] __kmalloc+0xb6/0x17f [ 440.648680] sk_prot_alloc+0x6b/0xc6 [ 440.648683] sk_alloc+0x1e/0xa1 [ 440.648700] sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth] [ 440.648716] sco_connect_cfm+0x166/0x281 [bluetooth] [ 440.648731] hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth] [ 440.648746] hci_event_packet+0x28b/0x2326 [bluetooth] [ 440.648759] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648764] process_one_work+0x163/0x2b2 [ 440.648767] worker_thread+0x1a9/0x25c [ 440.648770] kthread+0xf8/0xfd [ 440.648774] ret_from_fork+0x2e/0x38 [ 440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047 [ 440.648782] __slab_free+0x4b/0x27a [ 440.648784] kfree+0x12e/0x155 [ 440.648787] __sk_destruct+0xd3/0xdf [ 440.648790] sk_destruct+0x27/0x29 [ 440.648793] __sk_free+0x75/0x91 [ 440.648795] sk_free+0x1c/0x1e [ 440.648810] sco_sock_kill+0x5a/0x5f [bluetooth] [ 440.648825] sco_conn_del+0x8e/0xba [bluetooth] [ 440.648840] sco_disconn_cfm+0x3a/0x41 [bluetooth] [ 440.648855] hci_event_packet+0x45e/0x2326 [bluetooth] [ 440.648868] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648872] process_one_work+0x163/0x2b2 [ 440.648875] worker_thread+0x1a9/0x25c [ 440.648877] kthread+0xf8/0xfd [ 440.648880] ret_from_fork+0x2e/0x38 [ 440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x (null) flags=0x40008100 [ 440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8 When KASAN was enabled, it reported: [ 210.096613] ================================================================== [ 210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127 [ 210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040 [ 210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G U O 4.14.47-20180606+ #2 [ 210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017 [ 210.096693] Workqueue: hci0 hci_rx_work [bluetooth] [ 210.096698] Call Trace: [ 210.096711] dump_stack+0x46/0x59 [ 210.096722] print_address_description+0x6b/0x23b [ 210.096729] ? ex_handler_refcount+0x5b/0x127 [ 210.096736] kasan_report+0x220/0x246 [ 210.096744] ex_handler_refcount+0x5b/0x127 [ 210.096751] ? ex_handler_clear_fs+0x85/0x85 [ 210.096757] fixup_exception+0x8c/0x96 [ 210.096766] do_trap+0x66/0x2c1 [ 210.096773] do_error_trap+0x152/0x180 [ 210.096781] ? fixup_bug+0x78/0x78 [ 210.096817] ? hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096824] ? __schedule+0x113b/0x1453 [ 210.096830] ? sysctl_net_exit+0xe/0xe [ 210.096837] ? __wake_up_common+0x343/0x343 [ 210.096843] ? insert_work+0x107/0x163 [ 210.096850] invalid_op+0x1b/0x40 [ 210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296 [ 210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160 [ 210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940 [ 210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b [ 210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488 [ 210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008 [ 210.096920] ? __sk_destruct+0x2c6/0x2d4 [ 210.096959] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.096969] ? __local_bh_enable_ip+0x43/0x5b [ 210.097004] ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth] [ 210.097039] ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth] [ 210.097075] ? l2cap_ertm_init+0x94e/0x94e [bluetooth] [ 210.097093] ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd] [ 210.097102] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097109] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097115] ? __update_load_avg_se.isra.2+0x217/0x3a4 [ 210.097122] ? set_next_entity+0x7c3/0x12cd [ 210.097128] ? pick_next_entity+0x25e/0x26c [ 210.097135] ? pick_next_task_fair+0x2ca/0xc1a [ 210.097141] ? switch_mm_irqs_off+0x346/0xb4f [ 210.097147] ? __switch_to+0x769/0xbc4 [ 210.097153] ? compat_start_thread+0x66/0x66 [ 210.097188] ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth] [ 210.097195] ? finish_task_switch+0x392/0x431 [ 210.097228] ? hci_rx_work+0x154/0x487 [bluetooth] [ 210.097260] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097269] process_one_work+0x579/0x9e9 [ 210.097277] worker_thread+0x68f/0x804 [ 210.097285] kthread+0x31c/0x32b [ 210.097292] ? rescuer_thread+0x70c/0x70c [ 210.097299] ? kthread_create_on_node+0xa3/0xa3 [ 210.097306] ret_from_fork+0x35/0x40 [ 210.097314] Allocated by task 2040: [ 210.097323] kasan_kmalloc.part.1+0x51/0xc7 [ 210.097328] __kmalloc+0x17f/0x1b6 [ 210.097335] sk_prot_alloc+0xf2/0x1a3 [ 210.097340] sk_alloc+0x22/0x297 [ 210.097375] sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth] [ 210.097410] sco_connect_cfm+0x2d0/0x566 [bluetooth] [ 210.097443] hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth] [ 210.097476] hci_event_packet+0x85e/0x7de2 [bluetooth] [ 210.097507] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097512] process_one_work+0x579/0x9e9 [ 210.097517] worker_thread+0x68f/0x804 [ 210.097523] kthread+0x31c/0x32b [ 210.097529] ret_from_fork+0x35/0x40 [ 210.097533] Freed by task 2040: [ 210.097539] kasan_slab_free+0xb3/0x15e [ 210.097544] kfree+0x103/0x1a9 [ 210.097549] __sk_destruct+0x2c6/0x2d4 [ 210.097584] sco_conn_del.isra.1+0xba/0x10e [bluetooth] [ 210.097617] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.097648] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097653] process_one_work+0x579/0x9e9 [ 210.097658] worker_thread+0x68f/0x804 [ 210.097663] kthread+0x31c/0x32b [ 210.097670] ret_from_fork+0x35/0x40 [ 210.097676] The buggy address belongs to the object at ffff880107e170e8 which belongs to the cache kmalloc-1024 of size 1024 [ 210.097681] The buggy address is located 120 bytes inside of 1024-byte region [ffff880107e170e8, ffff880107e174e8) [ 210.097683] The buggy address belongs to the page: [ 210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping: (null) index:0xffff880107e15b68 compound_mapcount: 0 [ 210.110194] flags: 0x8000000000008100(slab|head) [ 210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016 [ 210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000 [ 210.115451] page dumped because: kasan: bad access detected [ 210.115454] Memory state around the buggy address: [ 210.115460] ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 210.115465] ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115472] ^ [ 210.115477] ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115481] ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115483] ================================================================== And finally when BT_DBG() and ftrace was enabled it showed: <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_close <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_release <...>-14979 [001] .... 186.104192: sco_sock_kill: sk ef0497a0 state 9 <...>-14979 [001] .... 186.104193: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104246: sco_sock_kill <-sco_conn_del kworker/u9:2-792 [001] .... 186.104248: sco_sock_kill: sk ef0497a0 state 9 kworker/u9:2-792 [001] .... 186.104249: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct <-__sk_destruct kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct: sk ef0497a0 kworker/u9:2-792 [001] .... 186.104860: hci_conn_del <-hci_event_packet kworker/u9:2-792 [001] .... 186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266 Only in the failed case, sco_sock_kill() gets called with the same sock pointer two times. Add a check for SOCK_DEAD to avoid continue killing a socket which has already been killed. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Use extended LE Connection if supportedJaganath Kanakkassery3-18/+109
This implements extended LE craete connection and enhanced LE conn complete event if the controller supports. For now it is as good as legacy LE connection and event as no new features in the extended connection is handled. < HCI Command: LE Extended Create Connection (0x08|0x0043) plen 26 Filter policy: White list is not used (0x00) Own address type: Public (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Initiating PHYs: 0x01 Entry 0: LE 1M Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Min connection interval: 50.00 msec (0x0028) Max connection interval: 70.00 msec (0x0038) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 2 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) Status: Success (0x00) Handle: 3585 Role: Master (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Connection interval: 67.50 msec (0x0036) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 @ MGMT Event: Device Connected (0x000b) plen 40 LE Address: DB:7E:2E:1D:85:E8 (Static) Flags: 0x00000000 Data length: 27 Name (complete): Designer Mouse Appearance: Mouse (0x03c2) Flags: 0x05 LE Limited Discoverable Mode BR/EDR Not Supported 16-bit Service UUIDs (complete): 1 entry Human Interface Device (0x1812) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Introduce helpers for le conn status and completeJaganath Kanakkassery1-45/+65
This is done so that the helpers can be used for extended conn implementation which will be done in subsequent patch. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Process extended ADV report eventJaganath Kanakkassery2-0/+61
This patch enables Extended ADV report event if extended scanning is supported in the controller and process the same. The new features are not handled and for now its as good as legacy ADV report. > HCI Event: LE Meta Event (0x3e) plen 53 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x0013 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Legacy PDU Type: ADV_IND (0x0013) Address type: Random (0x01) Address: DB:7E:2E:1A:85:E8 (Static) Primary PHY: LE 1M Secondary PHY: LE 1M SID: 0x00 TX power: 0 dBm RSSI: -90 dBm (0xa6) Periodic advertising invteral: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1b 0f 09 44 65 73 69 67 6e 65 72 20 4d 6f 75 73 65 ..Designer Mouse 03 19 c2 03 02 01 05 03 03 12 18 ........... Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Use extended scanning if controller supportsJaganath Kanakkassery2-25/+136
This implements Set extended scan param and set extended scan enable commands and use it for start LE scan based on controller support. The new features added in these commands are setting of new PHY for scanning and setting of scan duration. Both features are disabled for now, meaning only 1M PHY is set and scan duration is set to 0 which means that scanning will be done untill scan disable is called. < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6 Extended scan: Enabled (0x01) Filter duplicates: Enabled (0x01) Duration: 0 msec (0x0000) Period: 0.00 sec (0x0000) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Introduce helpers for LE set scan start and completeJaganath Kanakkassery2-49/+46
Introduce a helper hci_req_start_scan() which starts an LE scan and call it from passive_Scan() and active_scan(). There is not functionality change in this patch. This is basically done to enable extended scanning if the controller supports which will be done in the subsequent patch Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Add HCI command for clear Resolv listAnkit Navik2-0/+22
Check for Resolv list supported by controller. So check the supported commmand first before issuing this command i.e.,HCI_OP_LE_CLEAR_RESOLV_LIST Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 28.919131 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 28.920016 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 28.920164 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 28.920873 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 28.921109 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 28.922016 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0 #61 [hci0] 28.922166 > HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 28.922872 LE Clear Resolving List (0x08|0x0029) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #63 [hci0] 28.923117 > HCI Event: Command Complete (0x0e) plen 12 #64 [hci0] 28.924030 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06Bluetooth: Store Resolv list sizeAnkit Navik3-0/+45
When the controller supports the Read LE Resolv List size feature, the maximum list size are read and now stored. Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 17.979791 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 17.980629 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 17.980786 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 17.981627 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #59 [hci0] 17.981786 > HCI Event: Command Complete (0x0e) plen 12 #60 [hci0] 17.982636 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-05leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König1-2/+4
Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds5-6/+9
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook2-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-67/+65
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-04Merge branch 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds8-12/+6
Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-05-30Bluetooth: Re-use kstrtobool_from_user()Andy Shevchenko3-40/+19
Re-use kstrtobool_from_user() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-26net/bluetooth: convert to ->poll_maskChristoph Hellwig4-8/+5
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-26net: convert datagram_poll users tp ->poll_maskChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26net: remove sock_no_pollChristoph Hellwig3-3/+0
Now that sock_poll handles a NULL ->poll or ->poll_mask there is no need for a stub. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-18Bluetooth: Add __hci_cmd_send functionLoic Poulain1-0/+31
This function allows to send a HCI command without expecting any controller event/response in return. This is allowed for vendor- specific commands only. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: use wait_event API instead of open-coding itJohn Keeping1-23/+7
I've seen timeout errors from HCI commands where it looks like schedule_timeout() has returned immediately; additional logging for the error case gives: req_status=1 req_result=0 remaining=10000 jiffies so the device is still in state HCI_REQ_PEND and the value returned by schedule_timeout() is the same as the original timeout (HCI_INIT_TIMEOUT on a system with HZ=1000). Use wait_event_interruptible_timeout() instead of open-coding similar behaviour which is subject to the spurious failure described above. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: Prevent buffer overflow for large advertisement dataChriz Chow1-4/+8
There are some controllers sending out advertising data with illegal length value which is longer than HCI_MAX_AD_LENGTH, causing the buffer last_adv_data overflows. To avoid these controllers from overflowing the buffer, we do not process the advertisement data if its length is incorrect. Signed-off-by: Chriz Chow <chriz.chow@aminocom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-16isdn: replace ->proc_fops with ->proc_showChristoph Hellwig1-13/+1
And switch to proc_create_single_data. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16bluetooth: switch to proc_create_seq_dataChristoph Hellwig1-35/+5
And use proc private data directly instead of doing a detour through seq->private and private state. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-08Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller3-13/+33
Johan Hedberg says: ==================== pull request: bluetooth 2018-04-08 Here's one important Bluetooth fix for the 4.17-rc series that's needed to pass several Bluetooth qualification test cases. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-03Bluetooth: Fix connection if directed advertising and privacy is usedSzymon Janc3-13/+33
Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2018-04-01Bluetooth: Mark expected switch fall-throughsGustavo A. R. Silva2-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-03-26net: Use octal not symbolic permissionsJoe Perches1-2/+2
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+7
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01Bluetooth: Fix missing encryption refresh on Security RequestSzymon Janc1-1/+7
If Security Request is received on connection that is already encrypted with sufficient security master should perform encryption key refresh procedure instead of just ignoring Slave Security Request (Core Spec 5.0 Vol 3 Part H 2.4.6). > ACL Data RX: Handle 3585 flags 0x02 dlen 6 SMP: Security Request (0x0b) len 1 Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09) < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 44264272a5c426a9e868f034cf0e69f3 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Key Refresh Complete (0x30) plen 3 Status: Success (0x00) Handle: 3585 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-02-15Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-nextDavid S. Miller1-3/+3
Johan Hedberg says: ==================== pull request: bluetooth-next 2018-02-15 Here's the first bluetooth-next pull request targetting the 4.17 kernel release. - Fixes & cleanups to Atheros and Marvell drivers - Support for two new Realtek controllers - Support for new Intel Bluetooth controller - Fix for supporting multiple slave-role Bluetooth LE connections ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12net: make getname() functions return length rather than use int* parameterDenys Vlasenko4-11/+8
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-8/+8
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-10Bluetooth: Fix incorrect bits for LE statesŁukasz Rymanowski1-3/+3
This patch fixes incorrect checks for LE states. Issues found when doing mgmt tests for scenario when Linux Kernel should do connectable advertising while connected. Signed-off-by: Łukasz Rymanowski <lukasz.rymanowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-02-07seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macroAndy Shevchenko1-13/+0
The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current users, which are many of them, and for new comers to decrease code duplication. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.