aboutsummaryrefslogtreecommitdiffstats
path: root/net/bridge/br_if.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-07-20bridge: multicast: fix handling of temp and perm entriesSatish Ashok1-0/+1
When the bridge (or port) is brought down/up flush only temp entries and leave the perm ones. Flush perm entries only when deleting the bridge device or the associated port. Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24bridge: vlan: flush the dynamically learned entries on port vlan deleteNikolay Aleksandrov1-2/+2
Add a new argument to br_fdb_delete_by_port which allows to specify a vid to match when flushing entries and use it in nbp_vlan_delete() to flush the dynamically learned entries of the vlan/port pair when removing a vlan from a port. Before this patch only the local mac was being removed and the dynamically learned ones were left to expire. Note that the do_all argument is still respected and if specified, the vid will be ignored. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14bridge: reset bridge mtu after deleting an interfaceVenkat Venkatsubra1-0/+2
On adding an interface br_add_if() sets the MTU to the min of all the interfaces. Do the same thing on removing an interface too in br_del_if. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19net: bridge: reject DSA-enabled master netdevices as bridge membersFlorian Fainelli1-2/+8
DSA-enabled master network devices with a switch tagging protocol should strip the protocol specific format before handing the frame over to higher layer. When adding such a DSA master network device as a bridge member, we go through the following code path when receiving a frame: __netif_receive_skb_core -> first ptype check against ptype_all is not returning any handler for this skb -> check and invoke rx_handler: -> deliver frame to the bridge layer: br_handle_frame DSA registers a ptype handler with the fake ETH_XDSA ethertype, which is called *after* the bridge-layer rx_handler has run. br_handle_frame() tries to parse the frame it received from the DSA master network device, and will not be able to match any of its conditions and jumps straight at the end of the end of br_handle_frame() and returns RX_HANDLER_CONSUMED there. Since we returned RX_HANDLER_CONSUMED, __netif_receive_skb_core() stops RX processing for this frame and returns NET_RX_SUCCESS, so we never get a chance to call our switch tag packet processing logic and deliver frames to the DSA slave network devices, and so we do not get any functional bridge members at all. Instead of cluttering the bridge receive path with DSA-specific checks, and rely on assumptions about how __netif_receive_skb_core() is processing frames, we simply deny adding the DSA master network device (conduit interface) as a bridge member, leaving only the slave DSA network devices to be bridge members, since those will work correctly in all circumstances. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12bridge: Add ability to enable TSOToshiaki Makita1-0/+1
Currently a bridge device turns off TSO feature if no bridge ports support it. We can always enable it, since packets can be segmented on ports by software as well as on the bridge device. This will reduce the number of packets processed in the bridge. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05bridge: Add filtering support for default_pvidVlad Yasevich1-0/+3
Currently when vlan filtering is turned on on the bridge, the bridge will drop all traffic untill the user configures the filter. This isn't very nice for ports that don't care about vlans and just want untagged traffic. A concept of a default_pvid was recently introduced. This patch adds filtering support for default_pvid. Now, ports that don't care about vlans and don't define there own filter will belong to the VLAN of the default_pvid and continue to receive untagged traffic. This filtering can be disabled by setting default_pvid to 0. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: bridge: add a br_set_state helper functionFlorian Fainelli1-1/+1
In preparation for being able to propagate port states to e.g: notifiers or other kernel parts, do not manipulate the port state directly, but instead use a helper function which will allow us to do a bit more than just setting the state. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09bridge: switch order of rx_handler reg and upper dev linkJiri Pirko1-7/+8
The thing is that netdev_master_upper_dev_link calls call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev). That generates rtnl link message and during that, rtnl_link_ops->fill_slave_info is called. But with current ordering, rx_handler and IFF_BRIDGE_PORT are not set yet so there would have to be check for that in fill_slave_info callback. Resolve this by reordering to similar what bonding and team does to avoid the check. Also add removal of IFF_BRIDGE_PORT flag into error path. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-1/+1
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05bridge: Fix incorrect judgment of promiscToshiaki Makita1-1/+2
br_manage_promisc() incorrectly expects br_auto_port() to return only 0 or 1, while it actually returns flags, i.e., a subset of BR_AUTO_MASK. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01bridge: fix the unbalanced promiscuous count when add_if failedwangweidong1-1/+1
As commit 2796d0c648c94 ("bridge: Automatically manage port promiscuous mode."), make the add_if use dev_set_allmulti instead of dev_set_promiscuous, so when add_if failed, we should do dev_set_allmulti(dev, -1). Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Reviewed-by: Amos Kong <akong@redhat.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18bridge: fix spelling of promiscuousstephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bridge: Automatically manage port promiscuous mode.Vlad Yasevich1-7/+98
There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bridge: Introduce BR_PROMISC flagVlad Yasevich1-1/+1
Introduce a BR_PROMISC per-port flag that will help us track if the current port is supposed to be in promiscuous mode or not. For now, always start in promiscuous mode. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bridge: Keep track of ports capable of automatic discovery.Vlad Yasevich1-0/+24
By default, ports on the bridge are capable of automatic discovery of nodes located behind the port. This is accomplished via flooding of unknown traffic (BR_FLOOD) and learning the mac addresses from these packets (BR_LEARNING). If the above functionality is disabled by turning off these flags, the port requires static configuration in the form of static FDB entries to function properly. This patch adds functionality to keep track of all ports capable of automatic discovery. This will later be used to control promiscuity settings. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29netpoll: Remove gfp parameter from __netpoll_setupEric W. Biederman1-1/+1
The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10bridge: Change local fdb entries whenever mac address of bridge device changesToshiaki Makita1-3/+3
Vlan code may need fdb change when changing mac address of bridge device even if it is caused by the mac address changing of a bridge port. Example configuration: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address aa:bb:cc:dd:ee:ff brctl addif br0 eth0 brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab bridge vlan add dev br0 vid 10 self bridge vlan add dev eth0 vid 10 We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and f->addr == 12:34:56:78:90:ab at this time. Next, change the mac address of eth0 to greater value. ip link set eth0 address ee:ff:12:34:56:78 Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff. However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not able to communicate using br0 on vlan 10. Address this issue by deleting and adding local entries whenever changing the mac address of the bridge device. If there already exists an entry that has the same address, for example, in case that br_fdb_changeaddr() has already inserted it, br_fdb_change_mac_address() will simply fail to insert it and no duplicated entry will be made, as it was. This approach also needs br_add_if() to call br_fdb_insert() before br_stp_recalculate_bridge_id() so that we don't create an entry whose dst == NULL in this function to preserve previous behavior. Note that this is a slight change in behavior where the bridge device can receive the traffic to the new address before calling br_stp_recalculate_bridge_id() in br_add_if(). However, it is not a problem because we have already the address on the new port and such a way to insert new one before recalculating bridge id is taken in br_device_event() as well. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13bridge: move br_net_exit() to br.cWANG Cong1-15/+0
And it can become static. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bridge: spelling fixestanxiaojun1-1/+1
Fix spelling errors in bridge driver. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20bridge: flush br's address entry in fdb when remove theDing Tianhong1-0/+2
bridge dev When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9 [ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 563.468200] 0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8 [ 563.468204] ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8 [ 563.468206] ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78 [ 563.468209] Call Trace: [ 563.468218] [<ffffffff814d1c92>] dump_stack+0x6a/0x78 [ 563.468234] [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100 [ 563.468242] [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge] [ 563.468247] [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge] [ 563.468254] [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0 [ 563.468259] [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b [ 570.377958] Bridge firewalling registered --------------------------- cut here ------------------------------- The reason is that when the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge. v2: according to the Toshiaki Makita and Vlad's suggestion, I only delete the vlan0 entry, it still have a leak here if the vlan id is other number, so I need to call fdb_delete_by_port(br, NULL, 1) to flush all entries whose dst is NULL for the bridge. Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14bridge: Fix memory leak when deleting bridge with vlan filtering enabledToshiaki Makita1-0/+1
We currently don't call br_vlan_flush() when deleting a bridge, which leads to memory leak if br->vlan_info is allocated. Steps to reproduce: while : do brctl addbr br0 bridge vlan add dev br0 vid 10 self brctl delbr br0 done We can observe the cache size of corresponding slab entry (as kmalloc-2048 in SLUB) is increased. kmemleak output: unreferenced object 0xffff8800b68a7000 (size 2048): comm "bridge", pid 2086, jiffies 4295774704 (age 47.656s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 48 9b 36 00 88 ff ff .........H.6.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815eb6ae>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8116a1ca>] kmem_cache_alloc_trace+0xca/0x220 [<ffffffffa03eddd6>] br_vlan_add+0x66/0xe0 [bridge] [<ffffffffa03e543c>] br_setlink+0x2dc/0x340 [bridge] [<ffffffff8150e481>] rtnl_bridge_setlink+0x101/0x200 [<ffffffff8150d9d9>] rtnetlink_rcv_msg+0x99/0x260 [<ffffffff81528679>] netlink_rcv_skb+0xa9/0xc0 [<ffffffff8150d938>] rtnetlink_rcv+0x28/0x30 [<ffffffff81527ccd>] netlink_unicast+0xdd/0x190 [<ffffffff8152807f>] netlink_sendmsg+0x2ff/0x740 [<ffffffff814e8368>] sock_sendmsg+0x88/0xc0 [<ffffffff814e8ac8>] ___sys_sendmsg.part.14+0x298/0x2b0 [<ffffffff814e91de>] __sys_sendmsg+0x4e/0x90 [<ffffffff814e922e>] SyS_sendmsg+0xe/0x10 [<ffffffff81601669>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29bridge: inherit slave devices needed_headroomFlorian Fainelli1-0/+3
Some slave devices may have set a dev->needed_headroom value which is different than the default one, most likely in order to prepend a hardware descriptor in front of the Ethernet frame to send. Whenever a new slave is added to a bridge, ensure that we update the needed_headroom value accordingly to account for the slave needed_headroom value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26bridge: cleanup netpoll codestephen hemminger1-1/+2
This started out with fixing a sparse warning, then I realized that the wrapper function br_netpoll_info could just be collapsed away by rolling it into the enable code. Also, eliminate unnecessary goto's Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11bridge: Add a flag to control unicast packet flood.Vlad Yasevich1-1/+1
Add a flag to control flood of unicast traffic. By default, flood is on and the bridge will flood unicast traffic if it doesn't know the destination. When the flag is turned off, unicast traffic without an FDB will not be forwarded to the specified port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11bridge: Add flag to control mac learning.Vlad Yasevich1-1/+1
Allow user to control whether mac learning is enabled on the port. By default, mac learning is enabled. Disabling mac learning will cause new dynamic FDB entries to not be created for a particular port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15bridge: make user modified path cost stickystephen hemminger1-1/+2
Keep a STP port path cost value if it was set by a user. Don't replace it with the link-speed based path cost whenever the link goes down and comes back up. Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02bridge: remove a redundant synchronize_net()Eric Dumazet1-1/+0
commit 00cfec37484761 (net: add a synchronize_net() in netdev_rx_handler_unregister()) allows us to remove the synchronized_net() call from del_nbp() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13bridge: Add vlan support for local fdb entriesVlad Yasevich1-1/+1
When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13bridge: Add netlink interface to configure vlans on bridge portsVlad Yasevich1-0/+1
Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13bridge: Add vlan filtering infrastructureVlad Yasevich1-0/+1
Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04bridge: remove usage of netdev_set_master()Jiri Pirko1-3/+3
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30bridge: respect RFC2863 operational statestephen hemminger1-3/+3
The bridge link detection should follow the operational state of the lower device, rather than the carrier bit. This allows devices like tunnels that are controlled by userspace control plane to work with bridge STP link management. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21bridge: call br_netpoll_disable in br_add_ifGao feng1-3/+5
When netdev_set_master faild in br_add_if, we should call br_netpoll_disable to do some cleanup jobs,such as free the memory of struct netpoll which allocated in br_netpoll_enable. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: add some comments for NETDEV_RELEASEAmerigo Wang1-0/+4
Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()Amerigo Wang1-1/+1
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)stephen hemminger1-0/+1
This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław1-2/+3
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+5
2011-10-18bridge: fix hang on removal of bridge via netlinkstephen hemminger1-4/+5
Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03bridge: fix ordering of NEWLINK and NEWNEIGH eventsstephen hemminger1-8/+7
When port is added to a bridge, the old code would send the new neighbor netlink message before the subsequent new link message. This bug makes it difficult to use the monitoring API in an application. This code changes the ordering to add the forwarding entry after the port is setup. One of the error checks (for invalid address) is moved earlier in the process to avoid having to do unwind. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller1-1/+5
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-15net: consolidate and fix ethtool_ops->get_settings callingJiri Pirko1-1/+1
This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15br: remove redundant check and initJiri Pirko1-14/+12
Since these checks and initialization are done in dev_ethtool_get_settings called later on, remove this redundancy. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22bridge: fix a possible net_device leakEric Dumazet1-1/+5
Jan Beulich reported a possible net_device leak in bridge code after commit bb900b27a2f4 (bridge: allow creating bridge devices with netlink) Reported-by: Jan Beulich <JBeulich@novell.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-09Bridge: Always send NETDEV_CHANGEADDR up on br MAC change.Andrei Warkentin1-1/+5
This ensures the neighbor entries associated with the bridge dev are flushed, also invalidating the associated cached L2 headers. This means we br_add_if/br_del_if ports to implement hand-over and not wind up with bridge packets going out with stale MAC. This means we can also change MAC of port device and also not wind up with bridge packets going out with stale MAC. This builds on Stephen Hemminger's patch, also handling the br_del_if case and the port MAC change case. Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bridge: notifier called with the wrong devicestephen hemminger1-1/+1
If a new device is added to a bridge, the ethernet address of the bridge network device may change. When the address changes, the appropriate callback is called, but with the wrong device argument. The address of the bridge device (ie br0) changes not the address of the device being passed to add_if (ie eth0). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22net: remove synchronize_net() from netdev_set_master()Eric Dumazet1-0/+1
In the old days, we used to access dev->master in __netif_receive_skb() in a rcu_read_lock section. So one synchronize_net() call was needed in netdev_set_master() to make sure another cpu could not use old master while/after we release it. We now use netdev_rx_handler infrastructure and added one synchronize_net() call in bond_release()/bond_release_all() Remove the obsolete synchronize_net() from netdev_set_master() and add one in bridge del_nbp() after its netdev_rx_handler_unregister() call. This makes enslave -d a bit faster. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22bridge: call NETDEV_JOIN notifiers when add a slaveAmerigo Wang1-0/+2
In the previous patch I added NETDEV_JOIN, now we can notify netconsole when adding a device to a bridge too. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny1-2/+2
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.