aboutsummaryrefslogtreecommitdiffstats
path: root/net/bridge/br_if.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-10bridge: Fix error path for kobject_init_and_add()Tobin C. Harding1-7/+6
Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump). Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree(). Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29net: bridge: use netif_is_bridge_port()Julian Wiedmann1-1/+1
Replace the br_port_exists() macro with its twin from netdevice.h CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: bridge: Issue NETDEV_PRE_CHANGEADDRPetr Machata1-0/+9
When a port is attached to a bridge, the address of the bridge in question may change as well. Even if it would not change at this point (because the current bridge address is lower), it might end up changing later as a result of detach of another port, which can't be vetoed. Therefore issue NETDEV_PRE_CHANGEADDR regardless of whether the address will be used at this point or not, and make sure all involved parties would agree with the change. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: bridge: Propagate extack to switchdevPetr Machata1-1/+1
ndo_bridge_setlink has been updated in the previous patch to have extack available, and changelink RTNL op has had this argument since the time extack was added. Propagate both through the bridge driver to eventually reach br_switchdev_port_vlan_add(), where it will be used by subsequent patches. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21bridge: Allow querying bridge port flagsIdo Schimmel1-0/+12
Allow querying bridge port flags so that drivers capable of performing VxLAN learning will update the bridge driver only if learning is enabled on its bridge port corresponding to the VxLAN device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert mtu_set_by_user to a bitNikolay Aleksandrov1-2/+2
Convert the last remaining bool option to a bit thus reducing the overall net_bridge size further by 8 bytes. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31bridge: Switch to bitmap_zalloc()Andy Shevchenko1-3/+2
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: bridge: add support for backup portNikolay Aleksandrov1-0/+53
This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20bridge: make sure objects belong to container's ownerTyler Hicks1-0/+9
When creating various bridge objects in /sys/class/net/... make sure that they belong to the container's owner instead of global root (if they belong to a container/namespace). Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Overlapping changes in selftests Makefile. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03net: bridge: avoid duplicate notification on up/down/change netdev eventsNikolay Aleksandrov1-3/+8
While handling netdevice events, br_device_event() sometimes uses br_stp_(disable|enable)_port which unconditionally send a notification, but then a second notification for the same event is sent at the end of the br_device_event() function. To avoid sending duplicate notifications in such cases, check if one has already been sent (i.e. br_stp_enable/disable_port have been called). The patch is based on a change by Satish Ashok. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29bridge: check iface upper dev when setting master via ioctlHangbin Liu1-2/+2
When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible. v1 -> v2: use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device. Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31net: bridge: disable bridge MTU auto tuning if it was set manuallyNikolay Aleksandrov1-15/+21
As Roopa noted today the biggest source of problems when configuring bridge and ports is that the bridge MTU keeps changing automatically on port events (add/del/changemtu). That leads to inconsistent behaviour and network config software needs to chase the MTU and fix it on each such event. Let's improve on that situation and allow for the user to set any MTU within ETH_MIN/MAX limits, but once manually configured it is the user's responsibility to keep it correct afterwards. In case the MTU isn't manually set - the behaviour reverts to the previous and the bridge follows the minimum MTU. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31net: bridge: set min MTU on port events and allow user to set maxNikolay Aleksandrov1-29/+14
Recently the bridge was changed to automatically set maximum MTU on port events (add/del/changemtu) when vlan filtering is enabled, but that actually changes behaviour in a way which breaks some setups and can lead to packet drops. In order to still allow that maximum to be set while being compatible, we add the ability for the user to tune the bridge MTU up to the maximum when vlan filtering is enabled, but that has to be done explicitly and all port events (add/del/changemtu) lead to resetting that MTU to the minimum as before. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23net: bridge: fix direct access to bridge vlan_enabled and use helperNikolay Aleksandrov1-1/+1
We need to use br_vlan_enabled() helper otherwise we'll break builds without bridge vlans: net/bridge//br_if.c: In function ‘br_mtu’: net/bridge//br_if.c:458:8: error: ‘const struct net_bridge’ has no member named ‘vlan_enabled’ if (br->vlan_enabled) ^ net/bridge//br_if.c:462:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ scripts/Makefile.build:324: recipe for target 'net/bridge//br_if.o' failed Fixes: 419d14af9e07 ("bridge: Allow max MTU when multiple VLANs present") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23bridge: Allow max MTU when multiple VLANs presentChas Williams1-4/+22
If the bridge is allowing multiple VLANs, some VLANs may have different MTUs. Instead of choosing the minimum MTU for the bridge interface, choose the maximum MTU of the bridge members. With this the user only needs to set a larger MTU on the member ports that are participating in the large MTU VLANS. Signed-off-by: Chas Williams <3chas3@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: bridge: add notifications for the bridge dev on vlan changeNikolay Aleksandrov1-2/+2
Currently the bridge device doesn't generate any notifications upon vlan modifications on itself because it doesn't use the generic bridge notifications. With the recent changes we know if anything was modified in the vlan config thus we can generate a notification when necessary for the bridge device so add support to br_ifinfo_notify() similar to how other combined functions are done - if port is present it takes precedence, otherwise notify about the bridge. I've explicitly marked the locations where the notification should be always for the port by setting bridge to NULL. I've also taken the liberty to rearrange each modified function's local variables in reverse xmas tree as well. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd floodRoopa Prabhu1-0/+5
This patch adds a new bridge port flag BR_NEIGH_SUPPRESS to suppress arp and nd flood on bridge ports. It implements rfc7432, section 10. https://tools.ietf.org/html/rfc7432#section-10 for ethernet VPN deployments. It is similar to the existing BR_PROXYARP* flags but has a few semantic differences to conform to EVPN standard. Unlike the existing flags, this new flag suppresses flood of all neigh discovery packets (arp and nd) to tunnel ports. Supports both vlan filtering and non-vlan filtering bridges. In case of EVPN, it is mainly used to avoid flooding of arp and nd packets to tunnel ports like vxlan. This patch adds netlink and sysfs support to set this bridge port flag. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: bridge: Pass extack to down to netdev_master_upper_dev_linkDavid Ahern1-4/+11
Pass extack arg to br_add_if. Add messages for a couple of failures and pass arg to netdev_master_upper_dev_link. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to upper device linkingDavid Ahern1-1/+1
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26bridge: Export VLAN filtering stateIdo Schimmel1-1/+1
It's useful for drivers supporting bridge offload to be able to query the bridge's VLAN filtering state. Currently, upon enslavement to a bridge master, the offloading driver will only learn about the bridge's VLAN filtering state after the bridge device was already linked with its slave. Being able to query the bridge's VLAN filtering state allows such drivers to forbid enslavement in case resource couldn't be allocated for a VLAN-aware bridge and also choose the correct initialization routine for the enslaved port, which is dependent on the bridge type. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27bridge: add per-port broadcast flood flagMike Manning1-1/+1
Support for l2 multicast flood control was added in commit b6cb5ac8331b ("net: bridge: add per-port multicast flood flag"). It allows broadcast as it was introduced specifically for unknown multicast flood control. But as broadcast is a special case of multicast, this may also need to be disabled. For this purpose, introduce a flag to disable the flooding of received l2 broadcasts. This approach is backwards compatible and provides flexibility in filtering for the desired packet types. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Mike Manning <mmanning@brocade.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25bridge: move bridge multicast cleanup to ndo_uninitXin Long1-1/+0
During removing a bridge device, if the bridge is still up, a new mdb entry still can be added in br_multicast_add_group() after all mdb entries are removed in br_multicast_dev_del(). Like the path: mld_ifc_timer_expire -> mld_sendpack -> ... br_multicast_rcv -> br_multicast_add_group The new mp's timer will be set up. If the timer expires after the bridge is freed, it may cause use-after-free panic in br_multicast_group_expired. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa07ed2c8>] br_multicast_group_expired+0x28/0xb0 [bridge] Call Trace: <IRQ> [<ffffffff81094536>] call_timer_fn+0x36/0x110 [<ffffffffa07ed2a0>] ? br_mdb_free+0x30/0x30 [bridge] [<ffffffff81096967>] run_timer_softirq+0x237/0x340 [<ffffffff8108dcbf>] __do_softirq+0xef/0x280 [<ffffffff8169889c>] call_softirq+0x1c/0x30 [<ffffffff8102c275>] do_softirq+0x65/0xa0 [<ffffffff8108e055>] irq_exit+0x115/0x120 [<ffffffff81699515>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff81697a5d>] apic_timer_interrupt+0x6d/0x80 Nikolay also found it would cause a memory leak - the mdb hash is reallocated and not freed due to the mdb rehash. unreferenced object 0xffff8800540ba800 (size 2048): backtrace: [<ffffffff816e2287>] kmemleak_alloc+0x67/0xc0 [<ffffffff81260bea>] __kmalloc+0x1ba/0x3e0 [<ffffffffa05c60ee>] br_mdb_rehash+0x5e/0x340 [bridge] [<ffffffffa05c74af>] br_multicast_new_group+0x43f/0x6e0 [bridge] [<ffffffffa05c7aa3>] br_multicast_add_group+0x203/0x260 [bridge] [<ffffffffa05ca4b5>] br_multicast_rcv+0x945/0x11d0 [bridge] [<ffffffffa05b6b10>] br_dev_xmit+0x180/0x470 [bridge] [<ffffffff815c781b>] dev_hard_start_xmit+0xbb/0x3d0 [<ffffffff815c8743>] __dev_queue_xmit+0xb13/0xc10 [<ffffffff815c8850>] dev_queue_xmit+0x10/0x20 [<ffffffffa02f8d7a>] ip6_finish_output2+0x5ca/0xac0 [ipv6] [<ffffffffa02fbfc6>] ip6_finish_output+0x126/0x2c0 [ipv6] [<ffffffffa02fc245>] ip6_output+0xe5/0x390 [ipv6] [<ffffffffa032b92c>] NF_HOOK.constprop.44+0x6c/0x240 [ipv6] [<ffffffffa032bd16>] mld_sendpack+0x216/0x3e0 [ipv6] [<ffffffffa032d5eb>] mld_ifc_timer_expire+0x18b/0x2b0 [ipv6] This could happen when ip link remove a bridge or destroy a netns with a bridge device inside. With Nikolay's suggestion, this patch is to clean up bridge multicast in ndo_uninit after bridge dev is shutdown, instead of br_dev_delete, so that netif_running check in br_multicast_add_group can avoid this issue. v1->v2: - fix this issue by moving br_multicast_dev_del to ndo_uninit, instead of calling dev_close in br_dev_delete. (NOTE: Depends upon b6fe0440c637 ("bridge: implement missing ndo_uninit()")) Fixes: e10177abf842 ("bridge: multicast: fix handling of temp and perm entries") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bridge: implement missing ndo_uninit()Ido Schimmel1-1/+0
While the bridge driver implements an ndo_init(), it was missing a symmetric ndo_uninit(), causing the different de-initialization operations to be scattered around its dellink() and destructor(). Implement a symmetric ndo_uninit() and remove the overlapping operations from its dellink() and destructor(). This is a prerequisite for the next patch, as it allows us to have a proper cleanup upon changelink() failure during the bridge's newlink(). Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: break include loop netdevice.h, dsa.h, devlink.hAndrew Lunn1-0/+1
There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06bridge: move to workqueue gcNikolay Aleksandrov1-1/+1
Move the fdb garbage collector to a workqueue which fires at least 10 milliseconds apart and cleans chain by chain allowing for other tasks to run in the meantime. When having thousands of fdbs the system is much more responsive. Most importantly remove the need to check if the matched entry has expired in __br_fdb_get that causes false-sharing and is completely unnecessary if we cleanup entries, at worst we'll get 10ms of traffic for that entry before it gets deleted. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: bridge: add per-port multicast flood flagNikolay Aleksandrov1-1/+1
Add a per-port flag to control the unknown multicast flood, similar to the unknown unicast flood flag and break a few long lines in the netlink flag exports. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26bridge: switchdev: Add forward mark support for stacked devicesIdo Schimmel1-3/+7
switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of port netdevs so that packets being flooded by the device won't be flooded twice. It works by assigning a unique identifier (the ifindex of the first bridge port) to bridge ports sharing the same parent ID. This prevents packets from being flooded twice by the same switch, but will flood packets through bridge ports belonging to a different switch. This method is problematic when stacked devices are taken into account, such as VLANs. In such cases, a physical port netdev can have upper devices being members in two different bridges, thus requiring two different 'offload_fwd_mark's to be configured on the port netdev, which is impossible. The main problem is that packet and netdev marking is performed at the physical netdev level, whereas flooding occurs between bridge ports, which are not necessarily port netdevs. Instead, packet and netdev marking should really be done in the bridge driver with the switch driver only telling it which packets it already forwarded. The bridge driver will mark such packets using the mark assigned to the ingress bridge port and will prevent the packet from being forwarded through any bridge port sharing the same mark (i.e. having the same parent ID). Remove the current switchdev 'offload_fwd_mark' implementation and instead implement the proposed method. In addition, make rocker - the sole user of the mark - use the proposed method. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30net: bridge: add support for IGMP/MLD stats and export them via netlinkNikolay Aleksandrov1-2/+7
This patch adds stats support for the currently used IGMP/MLD types by the bridge. The stats are per-port (plus one stat per-bridge) and per-direction (RX/TX). The stats are exported via netlink via the new linkxstats API (RTM_GETSTATS). In order to minimize the performance impact, a new option is used to enable/disable the stats - multicast_stats_enabled, similar to the recent vlan stats. Also in order to avoid multiple IGMP/MLD type lookups and checks, we make use of the current "igmp" member of the bridge private skb->cb region to record the type on Rx (both host-generated and external packets pass by multicast_rcv()). We can do that since the igmp member was used as a boolean and all the valid IGMP/MLD types are positive values. The normal bridge fast-path is not affected at all, the only affected paths are the flooding ones and since we make use of the IGMP/MLD type, we can quickly determine if the packet should be counted using cache-hot data (cb's igmp member). We add counters for: * IGMP Queries * IGMP Leaves * IGMP v1/v2/v3 reports * MLD Queries * MLD Leaves * MLD v1/v2 reports These are invaluable when monitoring or debugging complex multicast setups with bridges. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21bridge: update max_gso_segs and max_gso_sizeEric Dumazet1-0/+16
It can be useful to lower max_gso_segs on NIC with very low number of TX descriptors like bcmgenet. However, this is defeated by bridge since it does not propagate the lower value of max_gso_segs and max_gso_size. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Petri Gynther <pgynther@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bridge: notify enslaved devices of headroom changesPaolo Abeni1-2/+35
On bridge needed_headroom changes, the enslaved devices are notified via the ndo_set_rx_headroom method Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: bridge: use __ethtool_get_ksettingsDavid Decotigny1-3/+3
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: Propagate vlan add failure to userElad Raz1-1/+10
Disallow adding interfaces to a bridge when vlan filtering operation failed. Send the failure code to the user. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: add possibility to pass information about upper device via notifierJiri Pirko1-1/+1
Sometimes the drivers and other code would find it handy to know some internal information about upper device being changed. So allow upper-code to pass information down to notifier listeners during linking. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: propagate upper priv via netdev_master_upper_dev_linkJiri Pirko1-1/+1
Eliminate netdev_master_upper_dev_link_private and pass priv directly as a parameter of netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15bridge: defer switchdev fdb del call in fdb_del_external_learnJiri Pirko1-0/+3
Since spinlock is held here, defer the switchdev operation. Also, ensure that defered switchdev ops are processed before port master device is unlinked. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: move back vlan_flushNikolay Aleksandrov1-2/+1
Ido Schimmel reported a problem with switchdev devices because of the order change of del_nbp operations, more specifically the move of nbp_vlan_flush() which deletes all vlans and frees vlgrp after the rx_handler has been unregistered. So in order to fix this move vlan_flush back where it was and make it destroy the rhtable after NULLing vlgrp and waiting a grace period to make sure noone can see it. Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01bridge: vlan: fix possible null ptr derefs on port init and deinitNikolay Aleksandrov1-1/+2
When a new port is being added we need to make vlgrp available after rhashtable has been initialized and when removing a port we need to flush the vlans and free the resources after we're sure noone can use the port, i.e. after it's removed from the port list and synchronize_rcu is executed. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20bridge: multicast: fix handling of temp and perm entriesSatish Ashok1-0/+1
When the bridge (or port) is brought down/up flush only temp entries and leave the perm ones. Flush perm entries only when deleting the bridge device or the associated port. Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24bridge: vlan: flush the dynamically learned entries on port vlan deleteNikolay Aleksandrov1-2/+2
Add a new argument to br_fdb_delete_by_port which allows to specify a vid to match when flushing entries and use it in nbp_vlan_delete() to flush the dynamically learned entries of the vlan/port pair when removing a vlan from a port. Before this patch only the local mac was being removed and the dynamically learned ones were left to expire. Note that the do_all argument is still respected and if specified, the vid will be ignored. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14bridge: reset bridge mtu after deleting an interfaceVenkat Venkatsubra1-0/+2
On adding an interface br_add_if() sets the MTU to the min of all the interfaces. Do the same thing on removing an interface too in br_del_if. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19net: bridge: reject DSA-enabled master netdevices as bridge membersFlorian Fainelli1-2/+8
DSA-enabled master network devices with a switch tagging protocol should strip the protocol specific format before handing the frame over to higher layer. When adding such a DSA master network device as a bridge member, we go through the following code path when receiving a frame: __netif_receive_skb_core -> first ptype check against ptype_all is not returning any handler for this skb -> check and invoke rx_handler: -> deliver frame to the bridge layer: br_handle_frame DSA registers a ptype handler with the fake ETH_XDSA ethertype, which is called *after* the bridge-layer rx_handler has run. br_handle_frame() tries to parse the frame it received from the DSA master network device, and will not be able to match any of its conditions and jumps straight at the end of the end of br_handle_frame() and returns RX_HANDLER_CONSUMED there. Since we returned RX_HANDLER_CONSUMED, __netif_receive_skb_core() stops RX processing for this frame and returns NET_RX_SUCCESS, so we never get a chance to call our switch tag packet processing logic and deliver frames to the DSA slave network devices, and so we do not get any functional bridge members at all. Instead of cluttering the bridge receive path with DSA-specific checks, and rely on assumptions about how __netif_receive_skb_core() is processing frames, we simply deny adding the DSA master network device (conduit interface) as a bridge member, leaving only the slave DSA network devices to be bridge members, since those will work correctly in all circumstances. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12bridge: Add ability to enable TSOToshiaki Makita1-0/+1
Currently a bridge device turns off TSO feature if no bridge ports support it. We can always enable it, since packets can be segmented on ports by software as well as on the bridge device. This will reduce the number of packets processed in the bridge. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05bridge: Add filtering support for default_pvidVlad Yasevich1-0/+3
Currently when vlan filtering is turned on on the bridge, the bridge will drop all traffic untill the user configures the filter. This isn't very nice for ports that don't care about vlans and just want untagged traffic. A concept of a default_pvid was recently introduced. This patch adds filtering support for default_pvid. Now, ports that don't care about vlans and don't define there own filter will belong to the VLAN of the default_pvid and continue to receive untagged traffic. This filtering can be disabled by setting default_pvid to 0. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: bridge: add a br_set_state helper functionFlorian Fainelli1-1/+1
In preparation for being able to propagate port states to e.g: notifiers or other kernel parts, do not manipulate the port state directly, but instead use a helper function which will allow us to do a bit more than just setting the state. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09bridge: switch order of rx_handler reg and upper dev linkJiri Pirko1-7/+8
The thing is that netdev_master_upper_dev_link calls call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev). That generates rtnl link message and during that, rtnl_link_ops->fill_slave_info is called. But with current ordering, rx_handler and IFF_BRIDGE_PORT are not set yet so there would have to be check for that in fill_slave_info callback. Resolve this by reordering to similar what bonding and team does to avoid the check. Also add removal of IFF_BRIDGE_PORT flag into error path. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-1/+1
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>