aboutsummaryrefslogtreecommitdiffstats
path: root/net/bridge (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-12-15switchdev: Pass original device to port netdev driverIdo Schimmel4-0/+6
switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: add possibility to pass information about upper device via notifierJiri Pirko1-1/+1
Sometimes the drivers and other code would find it handy to know some internal information about upper device being changed. So allow upper-code to pass information down to notifier listeners during linking. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: propagate upper priv via netdev_master_upper_dev_linkJiri Pirko1-1/+1
Eliminate netdev_master_upper_dev_link_private and pass priv directly as a parameter of netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16switchdev: bridge: Check return code is not EOPNOTSUPPIdo Schimmel2-2/+2
When NET_SWITCHDEV=n, switchdev_port_attr_set simply returns EOPNOTSUPP. In this case we should not emit errors and warnings to the kernel log. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 0bc05d585d38 ("switchdev: allow caller to explicitly request attr_set as deferred") Fixes: 6ac311ae8bfb ("Adding switchdev ageing notification on port bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-10Revert "bridge: Allow forward delay to be cfgd when STP enabled"Vlad Yasevich1-4/+9
This reverts commit 34c2d9fb0498c066afbe610b15e18995fd8be792. There are 2 reasons for this revert: 1) The commit in question doesn't do what it says it does. The description reads: "Allow bridge forward delay to be configured when Spanning Tree is enabled." This was already the case before the commit was made. What the commit actually do was disallow invalid values or 'forward_delay' when STP was turned off. 2) The above change was actually a change in the user observed behavior and broke things like libvirt and other network configs that set 'forward_delay' to 0 without enabling STP. The value of 0 is actually used when STP is turned off to immediately mark the bridge as forwarding. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02bridge: vlan: Use rcu_dereference instead of rtnl_dereferenceIdo Schimmel1-1/+1
br_should_learn() is protected by RCU and not by RTNL, so use correct flavor of nbp_vlan_group(). Fixes: 907b1e6e83ed ("bridge: vlan: use proper rcu for the vlgrp member") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02bridge: vlan: Use correct flag name in commentIdo Schimmel1-3/+3
The flag used to indicate if a VLAN should be used for filtering - as opposed to context only - on the bridge itself (e.g. br0) is called 'brentry' and not 'brvlan'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02bridge: vlan: Prevent possible use-after-freeIdo Schimmel1-0/+2
When adding a port to a bridge we initialize VLAN filtering on it. We do not bail out in case an error occurred in nbp_vlan_init, as it can be used as a non VLAN filtering bridge. However, if VLAN filtering is required and an error occurred in nbp_vlan_init, we should set vlgrp to NULL, so that VLAN filtering functions (e.g. br_vlan_find, br_get_pvid) will know the struct is invalid and will not try to access it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30bridge: set is_local and is_static before fdb entry is added to the fdb hashtableRoopa Prabhu2-9/+10
Problem Description: We can add fdbs pointing to the bridge with NULL ->dst but that has a few race conditions because br_fdb_insert() is used which first creates the fdb and then, after the fdb has been published/linked, sets "is_local" to 1 and in that time frame if a packet arrives for that fdb it may see it as non-local and either do a NULL ptr dereference in br_forward() or attach the fdb to the port where it arrived, and later br_fdb_insert() will make it local thus getting a wrong fdb entry. Call chain br_handle_frame_finish() -> br_forward(): But in br_handle_frame_finish() in order to call br_forward() the dst should not be local i.e. skb != NULL, whenever the dst is found to be local skb is set to NULL so we can't forward it, and here comes the problem since it's running only with RCU when forwarding packets it can see the entry before "is_local" is set to 1 and actually try to dereference NULL. The main issue is that if someone sends a packet to the switch while it's adding the entry which points to the bridge device, it may dereference NULL ptr. This is needed now after we can add fdbs pointing to the bridge. This poses a problem for br_fdb_update() as well, while someone's adding a bridge fdb, but before it has is_local == 1, it might get moved to a port if it comes as a source mac and then it may get its "is_local" set to 1 This patch changes fdb_create to take is_local and is_static as arguments to set these values in the fdb entry before it is added to the hash. Also adds null check for port in br_forward. Fixes: 3741873b4f73 ("bridge: allow adding of fdb entries pointing to the bridge device") Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21netlink: Rightsize IFLA_AF_SPEC size calculationArad, Ronen1-20/+1
if_nlmsg_size() overestimates the minimum allocation size of netlink dump request (when called from rtnl_calcit()) or the size of the message (when called from rtnl_getlink()). This is because ext_filter_mask is not supported by rtnl_link_get_af_size() and rtnl_link_get_size(). The over-estimation is significant when at least one netdev has many VLANs configured (8 bytes for each configured VLAN). This patch-set "rightsizes" the protocol specific attribute size calculation by propagating ext_filter_mask to rtnl_link_get_af_size() and adding this a argument to get_link_af_size op in rtnl_af_ops. Bridge module already used filtering aware sizing for notifications. br_get_link_af_size_filtered() is consistent with the modified get_link_af_size op so it replaces br_get_link_af_size() in br_af_ops. br_get_link_af_size() becomes unused and thus removed. Signed-off-by: Ronen Arad <ronen.arad@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21Adding switchdev ageing notification on port bridgedElad Raz1-0/+12
Configure ageing time to the HW for newly bridged device CC: Scott Feldman <sfeldma@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Elad Raz <eladr@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso12-208/+706
This merge resolves conflicts with 75aec9df3a78 ("bridge: Remove br_nf_push_frag_xmit_sk") as part of Eric Biederman's effort to improve netns support in the network stack that reached upstream via David's net-next tree. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Conflicts: net/bridge/br_netfilter_hooks.c
2015-10-16netfilter: remove hook owner refcountingFlorian Westphal3-13/+0
since commit 8405a8fff3f8 ("netfilter: nf_qeueue: Drop queue entries on nf_unregister_hook") all pending queued entries are discarded. So we can simply remove all of the owner handling -- when module is removed it also needs to unregister all its hooks. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-15bridge: defer switchdev fdb del call in fdb_del_external_learnJiri Pirko2-1/+7
Since spinlock is held here, defer the switchdev operation. Also, ensure that defered switchdev ops are processed before port master device is unlinked. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: remove pointers from switchdev objectsJiri Pirko1-1/+1
When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: allow caller to explicitly request attr_set as deferredJiri Pirko1-1/+2
Caller should know if he can call attr_set directly (when holding RTNL) or if he has to defer the att_set processing for later. This also allows drivers to sleep inside attr_set and report operation status back to switchdev core. Switchdev core then warns if status is not ok, instead of silent errors happening in drivers. Benefit from newly introduced switchdev deferred ops infrastructure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: move back vlan_flushNikolay Aleksandrov3-10/+25
Ido Schimmel reported a problem with switchdev devices because of the order change of del_nbp operations, more specifically the move of nbp_vlan_flush() which deletes all vlans and frees vlgrp after the rx_handler has been unregistered. So in order to fix this move vlan_flush back where it was and make it destroy the rhtable after NULLing vlgrp and waiting a grace period to make sure noone can see it. Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: drop unnecessary flush codeNikolay Aleksandrov1-8/+1
As Ido Schimmel pointed out the vlan_vid_del() code in nbp_vlan_flush is unnecessary (and is actually a remnant of the old vlan code) so we can remove it. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: use rcu for vlan_list traversal in br_fill_ifinfoNikolay Aleksandrov1-8/+13
br_fill_ifinfo is called by br_ifinfo_notify which can be called from many contexts with different locks held, sometimes it relies upon bridge's spinlock only which is a problem for the vlan code, so use explicitly rcu for that to avoid problems. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: use proper rcu for the vlgrp memberNikolay Aleksandrov6-53/+104
The bridge and port's vlgrp member is already used in RCU way, currently we rely on the fact that it cannot disappear while the port exists but that is error-prone and we might miss places with improper locking (either RCU or RTNL must be held to walk the vlan_list). So make it official and use RCU for vlgrp to catch offenders. Introduce proper vlgrp accessors and use them consistently throughout the code. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: fix gc_timer mod/del race conditionNikolay Aleksandrov1-1/+9
commit c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev") introduced a timer race condition because the gc_timer can get rearmed after it's supposedly stopped and flushed in br_dev_delete() leading to a use of freed memory. So take rtnl to sync with bridge destruction when setting ageing_timer. Here's the trace reproduced with these two commands running in parallel: while :; do echo 10000 > /sys/class/net/br0/bridge/ageing_timer; done; while :; do brctl addbr br0; ip l set br0 up; ip l set br0 down; brctl delbr br0; done; [ 300.000029] BUG: unable to handle kernel paging request at ffffffff811c59d3 [ 300.000263] IP: [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.000422] PGD 1a0f067 PUD 1a10063 PMD 10001e1 [ 300.000639] Oops: 0003 [#1] SMP [ 300.000793] Modules linked in: bridge stp llc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd snd_hda_codec_generic qxl drm_kms_helper psmouse pcspkr ttm snd_hda_intel 9pnet_virtio evdev serio_raw joydev snd_hda_codec 9pnet virtio_balloon drm snd_hwdep virtio_console snd_hda_core pvpanic snd_pcm i2c_piix4 snd_timer acpi_cpufreq parport_pc snd parport soundcore button processor i2c_core ipv6 autofs4 hid_generic usbhid hid ext4 crc16 mbcache jbd2 sg sr_mod cdrom ata_generic virtio_blk virtio_net e1000 ehci_pci uhci_hcd ehci_hcd usbcore usb_common floppy ata_piix libata virtio_pci virtio_ring virtio scsi_mod [ 300.004008] CPU: 1 PID: 1169 Comm: bash Not tainted 4.3.0-rc3+ #46 [ 300.004008] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 300.004008] task: ffff880035be2200 ti: ffff88003795c000 task.ti: ffff88003795c000 [ 300.004008] RIP: 0010:[<ffffffff810f168e>] [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.004008] RSP: 0018:ffff88003fd03e78 EFLAGS: 00010046 [ 300.004008] RAX: ffff88003fd0ef60 RBX: 840fc78949c08548 RCX: 00000001ffffffff [ 300.004008] RDX: 0000000000000000 RSI: ffffffff811c59d3 RDI: ffff88003fd0df00 [ 300.004008] RBP: ffff88003fd03e78 R08: 00000000ffffffff R09: 0000000000000000 [ 300.004008] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003fd0df00 [ 300.004008] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffff816032e0 [ 300.004008] FS: 00007fcbdd609700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 300.004008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.004008] CR2: ffffffff811c59d3 CR3: 0000000037879000 CR4: 00000000000406e0 [ 300.004008] Stack: [ 300.004008] ffff88003fd03ea8 ffffffff810f1775 ffff88003c8cb958 ffff88003fd0df00 [ 300.004008] 0000000000000000 0000000000000001 ffff88003fd03f18 ffffffff810f28c4 [ 300.004008] ffff88003fd0eb68 ffff88003fd0e968 ffff88003fd0e768 ffff88003fd0df68 [ 300.004008] Call Trace: [ 300.004008] <IRQ> [ 300.004008] [<ffffffff810f1775>] cascade+0x45/0x70 [ 300.004008] [<ffffffff810f28c4>] run_timer_softirq+0x2f4/0x340 [ 300.004008] [<ffffffff8107e380>] __do_softirq+0xd0/0x440 [ 300.004008] [<ffffffff8107e8a3>] irq_exit+0xb3/0xc0 [ 300.004008] [<ffffffff815c2032>] smp_apic_timer_interrupt+0x42/0x50 [ 300.004008] [<ffffffff815bfe37>] apic_timer_interrupt+0x87/0x90 [ 300.004008] <EOI> [ 300.004008] [<ffffffff811fb80c>] ? create_object+0x13c/0x2e0 [ 300.004008] [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70 [ 300.004008] [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70 [ 300.004008] [<ffffffff8101e17f>] print_context_stack+0x7f/0xf0 [ 300.004008] [<ffffffff8101d55b>] dump_trace+0x11b/0x300 [ 300.004008] [<ffffffff8102970b>] save_stack_trace+0x2b/0x50 [ 300.004008] [<ffffffff811fb80c>] create_object+0x13c/0x2e0 [ 300.004008] [<ffffffff815b2e8e>] kmemleak_alloc+0x4e/0xb0 [ 300.004008] [<ffffffff811e475d>] kmem_cache_alloc_trace+0x18d/0x2f0 [ 300.004008] [<ffffffff8128b139>] kernfs_fop_open+0xc9/0x380 [ 300.004008] [<ffffffff8120214f>] do_dentry_open+0x1ff/0x2f0 [ 300.004008] [<ffffffff8128b070>] ? kernfs_fop_release+0x70/0x70 [ 300.004008] [<ffffffff812034f9>] vfs_open+0x59/0x60 [ 300.004008] [<ffffffff812130de>] path_openat+0x1ce/0x1260 [ 300.004008] [<ffffffff812154ae>] do_filp_open+0x7e/0xe0 [ 300.004008] [<ffffffff812251ff>] ? __alloc_fd+0xaf/0x180 [ 300.004008] [<ffffffff8120387b>] do_sys_open+0x12b/0x210 [ 300.004008] [<ffffffff8120397e>] SyS_open+0x1e/0x20 [ 300.004008] [<ffffffff815bf0b6>] entry_SYSCALL_64_fastpath+0x16/0x7a [ 300.004008] Code: 66 90 48 8b 46 10 48 8b 4f 40 55 48 89 c2 48 89 e5 48 29 ca 48 81 fa ff 00 00 00 77 20 0f b6 c0 48 8d 44 c7 68 48 8b 10 48 85 d2 <48> 89 16 74 04 48 89 72 08 48 89 30 48 89 46 08 5d c3 48 81 fa [ 300.004008] RIP [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.004008] RSP <ffff88003fd03e78> [ 300.004008] CR2: ffffffff811c59d3 Fixes: c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: vlan: enforce no pvid flag in vlan rangesNikolay Aleksandrov1-0/+3
Currently it's possible for someone to send a vlan range to the kernel with the pvid flag set which will result in the pvid bouncing from a vlan to vlan and isn't correct, it also introduces problems for hardware where it doesn't make sense having more than 1 pvid. iproute2 already enforces this, so let's enforce it on kernel-side as well. Reported-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: try switchdev op first in __vlan_vid_add/delJiri Pirko1-36/+22
Some drivers need to implement both switchdev vlan ops and vid_add/kill ndos. For that to work in bridge code, we need to try switchdev op first when adding/deleting vlan id. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12netfilter: bridge: avoid unused label warningArnd Bergmann1-12/+4
With the ARM mini2440_defconfig, the bridge netfilter code gets built with both CONFIG_NF_DEFRAG_IPV4 and CONFIG_NF_DEFRAG_IPV6 disabled, which leads to a harmless gcc warning: net/bridge/br_netfilter_hooks.c: In function 'br_nf_dev_queue_xmit': net/bridge/br_netfilter_hooks.c:792:2: warning: label 'drop' defined but not used [-Wunused-label] This gets rid of the warning by cleaning up the code to avoid the respective #ifdefs causing this problem, and replacing them with if(IS_ENABLED()) checks. I have verified that the resulting object code is unchanged, and an additional advantage is that we now get compile coverage of the unused functions in more configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: dd302b59bde0 ("netfilter: bridge: don't leak skb in error paths") Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12bridge: push bridge setting ageing_time down to switchdevScott Feldman5-7/+29
Use SWITCHDEV_F_SKIP_EOPNOTSUPP to skip over ports in bridge that don't support setting ageing_time (or setting bridge attrs in general). If push fails, don't update ageing_time in bridge and return err to user. If push succeeds, update ageing_time in bridge and run gc_timer now to recalabrate when to run gc_timer next, based on new ageing_time. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: allow adding of fdb entries pointing to the bridge deviceRoopa Prabhu2-30/+93
This patch enables adding of fdb entries pointing to the bridge device. This can be used to propagate mac address of vlan interfaces configured on top of the vlan filtering bridge. Before: $bridge fdb add 44:38:39:00:27:9f dev bridge RTNETLINK answers: Invalid argument After: $bridge fdb add 44:38:39:00:27:9f dev bridge Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: add support for port's multicast_router attributeNikolay Aleksandrov1-0/+19
Add IFLA_BRPORT_MULTICAST_ROUTER to allow setting/getting port's multicast_router via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: allow to flush port's fdbNikolay Aleksandrov1-0/+3
Add IFLA_BRPORT_FLUSH to allow flushing port's fdb similar to sysfs's flush. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's timer valuesNikolay Aleksandrov1-0/+14
Add the following attributes in order to export port's timer values: IFLA_BRPORT_MESSAGE_AGE_TIMER, IFLA_BRPORT_FORWARD_DELAY_TIMER and IFLA_BRPORT_HOLD_TIMER. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's topology_change_ack and config_pendingNikolay Aleksandrov1-1/+6
Add IFLA_BRPORT_TOPOLOGY_CHANGE_ACK and IFLA_BRPORT_CONFIG_PENDING to allow getting port's topology_change_ack and config_pending respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's id and numberNikolay Aleksandrov1-1/+5
Add IFLA_BRPORT_(ID|NO) to allow getting port's port_id and port_no respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's designated cost and portNikolay Aleksandrov1-1/+5
Add IFLA_BRPORT_DESIGNATED_(COST|PORT) to allow getting the port's designated cost and port respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's bridge idNikolay Aleksandrov1-1/+4
Add IFLA_BRPORT_BRIDGE_ID to allow getting the designated bridge id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's root idNikolay Aleksandrov1-1/+4
Add IFLA_BRPORT_ROOT_ID to allow getting the designated root id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: make br_fill_info's frame size smallerNikolay Aleksandrov1-23/+19
When KASAN is enabled the frame size grows > 2048 bytes and we get a warning, so make it smaller. net/bridge/br_netlink.c: In function 'br_fill_info': >> net/bridge/br_netlink.c:1110:1: warning: the frame size of 2160 bytes >> is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/net-nextDavid S. Miller1-9/+4
Eric W. Biederman says: ==================== net: Pass net through ip fragmention This is the next installment of my work to pass struct net through the output path so the code does not need to guess how to figure out which network namespace it is in, and ultimately routes can have output devices in another network namespace. This round focuses on passing net through ip fragmentation which we seem to call from about everywhere. That is the main ip output paths, the bridge netfilter code, and openvswitch. This has to happend at once accross the tree as function pointers are involved. First some prep work is done, then ipv4 and ipv6 are converted and then temporary helper functions are removed. ==================== Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for default_pvidNikolay Aleksandrov3-8/+20
Add IFLA_BR_VLAN_DEFAULT_PVID to allow setting/getting bridge's default_pvid via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for netfilter tables configNikolay Aleksandrov1-1/+36
Add support to allow getting/setting netfilter tables settings. Currently these are IFLA_BR_NF_CALL_IPTABLES, IFLA_BR_NF_CALL_IP6TABLES and IFLA_BR_NF_CALL_ARPTABLES. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for igmp's intervalsNikolay Aleksandrov1-1/+69
Add support to set/get all of the igmp's configurable intervals via netlink. These currently are: IFLA_BR_MCAST_LAST_MEMBER_INTVL IFLA_BR_MCAST_MEMBERSHIP_INTVL IFLA_BR_MCAST_QUERIER_INTVL IFLA_BR_MCAST_QUERY_INTVL IFLA_BR_MCAST_QUERY_RESPONSE_INTVL IFLA_BR_MCAST_STARTUP_QUERY_INTVL Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_startup_query_countNikolay Aleksandrov1-6/+16
Add IFLA_BR_MCAST_STARTUP_QUERY_CNT to allow setting/getting br->multicast_startup_query_count via netlink. Also align the ifla comments. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_last_member_countNikolay Aleksandrov1-1/+11
Add IFLA_BR_MCAST_LAST_MEMBER_CNT to allow setting/getting br->multicast_last_member_count via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for igmp's hash_maxNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_HASH_MAX to allow setting/getting br->hash_max via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for igmp's hash_elasticityNikolay Aleksandrov1-1/+11
Add IFLA_BR_MCAST_HASH_ELASTICITY to allow setting/getting br->hash_elasticity via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_querierNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_QUERIER to allow setting/getting br->multicast_querier via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_query_use_ifaddrNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_QUERY_USE_IFADDR to allow setting/getting br->multicast_query_use_ifaddr via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_snoopingNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_SNOOPING to allow enabling/disabling multicast snooping via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_routerNikolay Aleksandrov1-0/+19
Add IFLA_BR_MCAST_ROUTER to allow setting and retrieving br->multicast_router when igmp snooping is enabled. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add fdb flushNikolay Aleksandrov1-0/+3
Simple attribute that flushes the bridge's fdb. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add group_addr supportNikolay Aleksandrov1-1/+24
Add IFLA_BR_GROUP_ADDR attribute to allow setting and retrieving the group_addr via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export all timersNikolay Aleksandrov1-1/+15
Export the following bridge timers (also exported via sysfs): IFLA_BR_HELLO_TIMER, IFLA_BR_TCN_TIMER, IFLA_BR_TOPOLOGY_CHANGE_TIMER, IFLA_BR_GC_TIMER via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.