aboutsummaryrefslogtreecommitdiffstats
path: root/net/core/dev.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-23net/ipv6: re-do dad when interface has IFF_NOARP flag changeHangbin Liu1-6/+13
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23packet: copy user buffers before orphan or cloneWillem de Bruijn2-3/+19
tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD blockWill Deacon1-1/+1
When merging support for SSBD and the CRC32 instructions, the conflict resolution for the new capability entries in arm64_features[] inadvertedly predicated the availability of the CRC32 instructions on CONFIG_ARM64_SSBD, despite the functionality being entirely unrelated. Move the #ifdef CONFIG_ARM64_SSBD down so that it only covers the SSBD capability. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-23arm64: sysreg: fix sparse warningsSergey Matyukevich1-2/+2
Specify correct type for the constants to avoid the following sparse complaints: ./arch/arm64/include/asm/sysreg.h:471:42: warning: constant 0xffffffffffffffff is so big it is unsigned long ./arch/arm64/include/asm/sysreg.h:512:42: warning: constant 0xffffffffffffffff is so big it is unsigned long Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-23drm/atomic-helper: WARN if fake_commit->hw_done is not completed as expectedVille Syrjälä1-1/+3
For real commits we WARN if ->hw_done hasn't been completed by the time drm_atomic_helper_commit_cleanup_done() is called. Let's do the same for the fake commit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-23drm/atomic-helper: Complete fake_commit->flip_done potentially earlierVille Syrjälä1-0/+3
Consider the following scenario: 1. nonblocking enable crtc 2. wait for the event 3. nonblocking disable crtc On i915 this can lead to a spurious -EBUSY from step 3 on account of non-enabled planes getting the fake_commit in step 1 and we don't complete the fake_commit-> flip_done until drm_atomic_helper_commit_hw_done() which can happen a long time after the flip event was sent out. This will become somewhat easy to hit on SKL+ once we start to add all the planes for the crtc to every modeset commit for the purposes of forcing a watermark register programming [1]. To make the race a little less pronounced let's complete fake_commit->flip_done after drm_atomic_helper_wait_for_flip_done(). For the single crtc case this should make the race quite theoretical, assuming drm_atomic_helper_wait_for_flip_done() actually has to wait for the real commit flip_done. In case the real commit flip_done gets completed singificantly before drm_atomic_helper_wait_for_flip_done(), or we are dealing with multiple crtcs whose vblanks don't line up nicely the race still exists. [1] https://patchwork.freedesktop.org/patch/262670/ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before setting the commit") Testcase: igt/kms_cursor_legacy/*nonblocking-modeset-vs-cursor-atomic Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-23drm: rcar-du: Reject modes that fail CRTC timing requirementsLaurent Pinchart1-0/+12
The hardware requires the HDSR and VDSR registers to be set to 1 or higher. This translates to a minimum combined horizontal sync and back porch of 20 pixels and a minimum vertical back porch of 3 lines. Reject modes that fail those requirements. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix external clock error checksLaurent Pinchart1-5/+9
The rcar-du driver supports probe deferral for external clocks, but implements it badly by checking the wrong pointer due to a bad copy and paste. Fix it. While at it, reject invalid clocks outright for DU channels that have a display PLL, as the external clock is mandatory in that case. This avoids a WARN_ON() at runtime. Fixes: 1b30dbde8596 ("drm: rcar-du: Add support for external pixel clock") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Enable alpha property on primary planesKieran Bingham1-1/+2
The hardware supports alpha on all planes, and using it on the primary plane can be useful. Don't restrict the alpha property to overlay planes. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: lvds: Add R8A77965 supportLaurent Pinchart1-0/+1
Add support for the R-Car M3-N (R8A77965) SoC to the LVDS encoder driver. The encoder appears identical to the M3-W version, we can thus simply point to the generic Gen3 data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23dt-bindings: display: renesas: lvds: Document r8a77965 bindingsLaurent Pinchart1-0/+1
The M3-N (r8a77965) includes one LVDS encoder. Extend the binding to support it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix vblank initializationLaurent Pinchart1-1/+1
The drm_vblank_init() takes the total number of CRTCs as an argument, but the rcar-du driver passes a bitmask of the CRTC indices. Fix it. Fixes: 4bf8e1962f91 ("drm: Renesas R-Car Display Unit DRM driver") Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix the return value in case of error in 'rcar_du_crtc_set_crc_source()'Christophe JAILLET1-1/+1
We return 0 unconditionally in 'rcar_du_crtc_set_crc_source()'. However, 'ret' is set to some error codes if some function calls fail. Return 'ret' instead to propagate the error code. Fixes: 47a52d024e89 ("media: drm: rcar-du: Add support for CRC computation") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Add R8A7744 supportBiju Das1-1/+2
Add support for the R8A7744 DU (which is very similar to the R8A7743 DU); it has 1 DPAD (RGB) output and 1 LVDS output. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Add r8a77470 supportFabrizio Castro1-0/+28
Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23dt-bindings: display: renesas: du: Document the r8a7744 bindingsBiju Das1-0/+2
Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23dt-bindings: display: renesas: du: Document the r8a77470 bindingsFabrizio Castro1-0/+2
Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix typo in commentLaurent Pinchart1-1/+1
Fix the misspelled 'belance' in a comment. Reported-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm/shmobile: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-2/+2
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm/rcar-du: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-1/+1
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon1-1/+8
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon1-2/+2
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi1-2/+7
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net/dim: Update DIM start sample after each DIM iterationTal Gilboa1-0/+2
On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22flexfiles: use per-mirror specified stateid for IOTigran Mkrtchyan3-12/+32
rfc8435 says: For tight coupling, ffds_stateid provides the stateid to be used by the client to access the file. However current implementation replaces per-mirror provided stateid with by open or lock stateid. Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and nfs4_ff_layout_prepare_ds. Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-22NFSv4.2 copy do not allocate memory under the lockOlga Kornievskaia2-20/+21
Bruce pointed out that we shouldn't allocate memory while holding a lock in the nfs4_callback_offload() and handle_async_copy() that deal with a racing CB_OFFLOAD and reply to COPY case. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-22iommu/vt-d: Use memunmap to free memremapPan Bian1-1/+1
memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-22drm/i915: Update DRIVER_DATE to 20181122Jani Nikula1-1/+1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-22drm/prime: Fix drm_gem_prime_mmap() stack useNoralf Trønnes1-11/+20
drivers/gpu/drm/drm_prime.c: In function 'drm_gem_prime_mmap': >> drivers/gpu/drm/drm_prime.c:688:1: warning: the frame size of 1592 bytes is larger than 1024 bytes [-Wframe-larger-than=] Fix by allocating on the heap. Fixes: 7698799f9554 ("drm/prime: Add drm_gem_prime_mmap()") Reported-by: kbuild test robot <lkp@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181121180215.13881-1-noralf@tronnes.org
2018-11-22drm/i915: Update DRIVER_DATE to 20181122Jani Nikula1-2/+2
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-22drm/i915: avoid rebuilding i915_gpu_error.o on version string updatesHans Holmberg1-2/+2
There is no need to rebuild i915_gpu_error.o when the version string changes as the version is available in init_utsname()->release. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121095423.20760-1-hans.ml.holmberg@owltronix.com
2018-11-22drm/sun4i: wait on implicit fence before displayQiang Yu3-0/+6
Render like lima will attach a fence to the framebuffer dma_buf, display like sun4i should wait it finish before show the framebuffer. Otherwise tearing will be observed. Signed-off-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181122014417.23285-1-yuq825@gmail.com
2018-11-22drm: Merge drm_info.c into drm_debugfs.cDaniel Vetter4-143/+90
Ever since commit cb6458f97b53d7f73043206c18014b3ca63ac345 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 8 15:41:34 2013 +0200 drm: remove procfs code, take 2 Having the code shared between procfs and debugfs in the separate drm_info.c file stopped making sense. Merge them. Noticed because Lyude asked some questions on irc about why we even have drm_info_node and I remember this old story. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121213510.31260-1-daniel.vetter@ffwll.ch
2018-11-22Revert "Input: Add the `REL_WHEEL_HI_RES` event code"Benjamin Tissoires2-20/+1
This reverts commit aaf9978c3c0291ef3beaa97610bc9c3084656a85. Quoting Peter: There is a HID feature report called "Resolution Multiplier" Described in the "Enhanced Wheel Support in Windows" doc and the "USB HID Usage Tables" page 30. http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docx https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf This was new for Windows Vista, so we're only a decade behind here. I only accidentally found this a few days ago while debugging a stuck button on a Microsoft mouse. The docs above describe it like this: a wheel control by default sends value 1 per notch. If the resolution multiplier is active, the wheel is expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or just send events more often, i.e. for less physical motion (e.g. MS Comfort mouse). For the latter, you need the right HW of course. The Sculpt mouse has tactile wheel clicks, so nothing really changes. The Comfort mouse has continuous motion with no tactile clicks. Similar to the free-wheeling Logitech mice but without any inertia. Note that the doc also says that Vista and onwards *always* enable this feature where available. An example HID definition looks like this: Usage Page Generic Desktop (0x01) Usage Resolution Multiplier (0x48) Logical Minimum 0 Logical Maximum 1 Physical Minimum 1 Physical Maximum 16 Report Size 2 # in bits Report Count 1 Feature (Data, Var, Abs) So the actual bits have values 0 or 1 and that reflects real values 1 or 16. We've only seen single-bits so far, so there's low-res and hi-res, but nothing in between. The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel). Microsoft suggests that > Vendors should ship their devices with smooth scrolling disabled and allow > Windows to enable it. This ensures that the device works like a regular HID > device on legacy operating systems that do not support smooth scrolling. (see the wheel doc linked above) The mice that we tested so far do reset on unplug. Device Support looks to be all (?) Microsoft mice but nothing else Not supported: - Logitech G500s, G303 - Roccat Kone XTD - all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a workstation that I could find don't have it. - Etekcity something something - Razer Imperator Supported: - Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4 - Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12 - Microsoft Surface mouse - yes, physical: 1:4 So again, I think this is really just available on Microsoft mice, but probably all decent MS mice released over the last decade. Looking at the hardware itself: - no noticeable notches in the weel - low-res: 18 events per 360deg rotation (click angle 20 deg) - high-res: 72 events per 360deg → matches multiplier of 4 - I can feel the notches during wheel turns - low-res: 24 events per 360 deg rotation (click angle 15 deg) - horiz wheel is tilt-based, continuous output value 1 - high-res: 24 events per 360deg with value 12 → matches multiplier of 12 - horiz wheel output rate doubles/triples?, values is 3 - It's a touch strip, not a wheel so no notches - high-res: events have value 4 instead of 1 a bit strange given that it doesn't actually have notches. Ok, why is this an issue for the current API? First, because the logitech multiplier used in Harry's patches looks suspiciously like the Resolution Multiplier so I think we should assume it's the same thing. Nestor, can you shed some light on that? - `REL_WHEEL` is defined as the number of notches, emulated where needed. - `REL_WHEEL_HI_RES` is the movement of the user's finger in microns. - `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold for action to be taken and one such action" https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel If the multiplier is set to M, this means we need an accumulated value of M until we can claim there was a wheel click. So after enabling the multiplier and setting it to the maximum (like Windows): - M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is the `REL_WHEEL_HI_RES` value. - wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm / (360deg/15deg)) - For every M units accumulated, send one `REL_WHEEL` event The problem here is that we've now hardcoded 20mm/15 deg into the kernel and we have no way of getting the size of the wheel or the click angle into the kernel. In userspace we now have to undo the kernel's calculation. If our click angle is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and calculate the correct angle instead. This also means the 15 is a hardcoded option forever and cannot be changed. In hid-logitech-hidpp.c, the microns per unit is hardcoded per device. Harry, did you measure those by hand? We'd need to update the kernel for every device and there are 10 years worth of devices from MS alone. The multiplier default is 8 which is in the right ballpark, so I'm pretty sure this is the same as the Resolution Multiplier, just in HID++ lingo. And given that the 120 magic factor is what Windows uses in the end, I can't imagine Logitech rolling their own thing here. Nestor? And we're already fairly inaccurate with the microns anyway. The MX Anywhere 2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch) would be 334 micron. That's only 80% of the fallback value of 406 in the kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7 doesn't exist because it's not a factor of 120. Summary: Best option may be to simply do what Windows is doing, all the HW manufacturers have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in fractions of 120, with 120 being one notch and divide that by the multiplier for the actual events. So e.g. the Logitech multiplier 8 would send value 15 for each event in hi-res mode. This can be converted in userspace to whatever userspace needs (combined with a hwdb there that tells you wheel size/click angle/...). Conflicts: include/uapi/linux/input-event-codes.h -> I kept the new reserved event in the code, so I had to adapt the revert slightly Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: input: Create a utility class for counting scroll events"Benjamin Tissoires2-73/+0
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration""Benjamin Tissoires1-34/+13
This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"Benjamin Tissoires1-245/+4
This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"Benjamin Tissoires1-5/+10
This reverts commit 3fe1d6bbcd16f384d2c7dab2caf8e4b2df9ea7e6. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: fix a used uninitialized GCC warning"Benjamin Tissoires1-3/+5
This reverts commit 5fe2ccbef9d7aecf5c4402c753444f1a12096cfd. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: input: simplify/fix high-res scroll event handling"Benjamin Tissoires1-21/+22
This reverts commit 044ee890286153a1aefb40cb8b6659921aecb38b. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22drm/ast: fixed cursor may disappear sometimesY.C. Chen1-1/+1
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-11-21net: faraday: ftmac100: remove netif_running(netdev) check before disabling interruptsVincent Chen1-4/+3
In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22drm/ast: change resolution may cause screen blurredY.C. Chen1-0/+1
The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-11-21net/smc: use after free fix in smc_wr_tx_put_slot()Ursula Braun1-1/+3
In smc_wr_tx_put_slot() field pend->idx is used after being cleared. That means always idx 0 is cleared in the wr_tx_mask. This results in a broken administration of available WR send payload buffers. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: atomic SMCD cursor handlingUrsula Braun2-26/+60
Running uperf tests with SMCD on LPARs results in corrupted cursors. SMCD cursors should be treated atomically to fix cursor corruption. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: add SMC-D shutdown signalHans Wippel4-14/+43
When a SMC-D link group is freed, a shutdown signal should be sent to the peer to indicate that the link group is invalid. This patch adds the shutdown signal to the SMC code. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: use queue pair number when matching link groupKarsten Graul3-9/+12
When searching for an existing link group the queue pair number is also to be taken into consideration. When the SMC server sends a new number in a CLC packet (keeping all other values equal) then a new link group is to be created on the SMC client side. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: abort CLC connection in smc_releaseHans Wippel1-0/+2
In case of a non-blocking SMC socket, the initial CLC handshake is performed over a blocking TCP connection in a worker. If the SMC socket is released, smc_release has to wait for the blocking CLC socket operations (e.g., kernel_connect) inside the worker. This patch aborts a CLC connection when the respective non-blocking SMC socket is released to avoid waiting on socket operations or timeouts. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21tcp: defer SACK compression after DupThreshEric Dumazet4-6/+17
Jean-Louis reported a TCP regression and bisected to recent SACK compression. After a loss episode (receiver not able to keep up and dropping packets because its backlog is full), linux TCP stack is sending a single SACK (DUPACK). Sender waits a full RTO timer before recovering losses. While RFC 6675 says in section 5, "Algorithm Details", (2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true -- indicating at least three segments have arrived above the current cumulative acknowledgment point, which is taken to indicate loss -- go to step (4). ... (4) Invoke fast retransmit and enter loss recovery as follows: there are old TCP stacks not implementing this strategy, and still counting the dupacks before starting fast retransmit. While these stacks probably perform poorly when receivers implement LRO/GRO, we should be a little more gentle to them. This patch makes sure we do not enable SACK compression unless 3 dupacks have been sent since last rcv_nxt update. Ideally we should even rearm the timer to send one or two more DUPACK if no more packets are coming, but that will be work aiming for linux-4.21. Many thanks to Jean-Louis for bisecting the issue, providing packet captures and testing this patch. Fixes: 5d9f4262b7ea ("tcp: add SACK compression") Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Tested-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net: skb_scrub_packet(): Scrub offload_fwd_markPetr Machata1-0/+5
When a packet is trapped and the corresponding SKB marked as already-forwarded, it retains this marking even after it is forwarded across veth links into another bridge. There, since it ingresses the bridge over veth, which doesn't have offload_fwd_mark, it triggers a warning in nbp_switchdev_frame_mark(). Then nbp_switchdev_allowed_egress() decides not to allow egress from this bridge through another veth, because the SKB is already marked, and the mark (of 0) of course matches. Thus the packet is incorrectly blocked. Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That function is called from tunnels and also from veth, and thus catches the cases where traffic is forwarded between bridges and transformed in a way that invalidates the marking. Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field") Signed-off-by: Petr Machata <petrm@mellanox.com> Suggested-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.