aboutsummaryrefslogtreecommitdiffstats
path: root/net/dsa/dsa.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-06net: dsa: move netdevice notifier registrationVivien Didelot1-6/+4
Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: use ds->num_ports when possibleVivien Didelot1-8/+8
The dsa_switch structure contains the number of ports. Use it where the structure is valid instead of the DSA_MAX_PORTS value. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: variable number of portsVivien Didelot1-3/+2
Change the ports[DSA_MAX_PORTS] array of the dsa_switch structure for a zero-length array, allocated at the same time as the dsa_switch structure itself. A dsa_switch_alloc() helper is provided for that. This commit brings no functional change yet since we pass DSA_MAX_PORTS as the number of ports for the moment. Future patches can update the DSA drivers separately to support dynamic number of ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26net: dsa: Make most functions take a dsa_port argumentFlorian Fainelli1-6/+9
In preparation for allowing platform data, and therefore no valid device_node pointer, make most DSA functions takes a pointer to a dsa_port structure whenever possible. While at it, introduce a dsa_port_is_valid() helper function which checks whether port->dn is NULL or not at the moment. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24net: dsa: Fix inverted test for multiple CPU interfaceAndrew Lunn1-1/+1
Remove the wrong !, otherwise we get false positives about having multiple CPU interfaces. Fixes: b22de490869d ("net: dsa: store CPU switch structure in the tree") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20net: dsa: Remove hwmon supportAndrew Lunn1-4/+0
Only the Marvell mv88e6xxx DSA driver made use of the HWMON support in DSA. The temperature sensor registers are actually in the embedded PHYs, and the PHY driver now supports it. So remove all HWMON support from DSA and drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: dsa: use cpu_switch instead of ds[0]Vivien Didelot1-1/+1
Now that the DSA Ethernet switches are true Linux devices, the CPU switch is not necessarily the first one. If its address is higher than the second switch on the same MDIO bus, its index will be 1, not 0. Avoid any confusion by using dst->cpu_switch instead of dst->ds[0]. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: dsa: store CPU switch structure in the treeVivien Didelot1-4/+3
Store a dsa_switch pointer to the CPU switch in the tree instead of only its index. This avoids the need to initialize it to -1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Make dsa_switch_ops constFlorian Fainelli1-5/+5
Now that we have properly encapsulated and made drivers utilize exported functions, we can switch dsa_switch_ops to be a annotated with const. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Encapsulate legacy switch drivers into dsa_switch_driverFlorian Fainelli1-5/+7
In preparation for making struct dsa_switch_ops const, encapsulate it within a dsa_switch_driver which has a list pointer and a pointer to dsa_switch_ops. This allows us to take the list_head pointer out of dsa_switch_ops, which is written to by {un,}register_switch_driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07net: dsa: move HWMON support to its own fileVivien Didelot1-129/+2
Isolate the HWMON support in DSA in its own file. Currently only the legacy DSA code is concerned. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06net: dsa: remove version stringVivien Didelot1-5/+0
The dsa_driver_version string is irrelevant and has not been bumped since its introduction about 9 years ago. Kill it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: dsa: remove out label in dsa_switch_setup_oneVivien Didelot1-27/+13
The "out" label in dsa_switch_setup_one() is useless, thus remove it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29of_mdio: add helper to deregister fixed-link PHYsJohan Hovold1-10/+2
Add helper to deregister fixed-link PHYs registered using of_phy_register_fixed_link(). Convert the two drivers that care to deregister their fixed-link PHYs to use the new helper, but note that most drivers currently fail to do so. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27net: dsa: fix fixed-link-phy device leaksJohan Hovold1-1/+4
Make sure to drop the reference taken by of_phy_find_device() when registering and deregistering the fixed-link PHY-device. Fixes: 39b0c705195e ("net: dsa: Allow configuration of CPU & DSA port speeds/duplex") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20net-next: dsa: make the set_addr() operation optionalJohn Crispin1-3/+5
Only 1 of the 3 drivers currently has a set_addr() operation. Make the set_addr() callback optional to reduce the amount of empty stubs inside the drivers. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net-next: dsa: add Qualcomm tag RX/TX handlerJohn Crispin1-0/+3
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-24net: dsa: rename switch operations structureVivien Didelot1-35/+35
Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22net: dsa: Allow the DSA driver to indicate the tag protocolAndrew Lunn1-1/+4
DSA drivers may drive different families of switches which need different tag protocol. Rather than hard code the tag protocol in the driver structure, have a callback for the DSA core to call. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19net: dsa: bcm_sf2: Make it a real platform device driverFlorian Fainelli1-1/+0
The Broadcom Starfighter 2 switch driver should be a proper platform driver, now that the DSA code has been updated to allow that, register a switch device, feed it with the proper configuration data coming from Device Tree and register our switch device with DSA. The bulk of the changes consist in moving what bcm_sf2_sw_setup() did into the platform driver probe function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19net: dsa: Export suspend/resume functionsFlorian Fainelli1-2/+4
In preparation for allowing switch drivers to implement system-wide suspend/resume functions, export dsa_switch_suspend and dsa_switch_resume() such that these are callable from the appropriate driver specific suspend/resume functions. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-08net: dsa: initialize the routing tableVivien Didelot1-0/+6
The routing table of every switch in a tree is currently initialized to all zeros. This is an issue since 0 is a valid port number. Add a DSA_RTABLE_NONE=-1 constant to initialize the signed values of the routing table pointing to other switches. This fixes the device mapping of the mv88e6xxx driver where the port pointing to the switch itself and to non-existent switches was wrongly configured to be 0. It is now set to the expected 0xf value. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: dsa: Initialize CPU port ethtool ops per treeFlorian Fainelli1-0/+41
Now that we can properly support multiple distinct trees in the system, using a global variable: dsa_cpu_port_ethtool_ops is getting clobbered as soon as the second switch tree gets probed, and we don't want that. We need to move this to be dynamically allocated, and since we can't really be comparing addresses anymore to determine first time initialization versus any other times, just move this to dsa.c and dsa2.c where the remainder of the dst/ds initialization happens. The operations teardown restores the master netdev's ethtool_ops to its original ethtool_ops pointer (typically within the Ethernet driver) Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Add new binding implementationAndrew Lunn1-0/+5
The existing DSA binding has a number of limitations and problems. The main problem is that it cannot represent a switch as a linux device, hanging off some bus. It is limited to one CPU port. The DSA platform device is artificial, and does not really represent hardware. Implement a new binding which can be embedded into any type of node on a bus to represent one switch device, and its links to other switches. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Make mdio bus optionalAndrew Lunn1-11/+13
The switch may want to instantiate its own MDIO bus. Only do it centrally if the switch has not already created one, and the read op is implemented. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Refactor selection of tag ops into a functionAndrew Lunn1-26/+45
Replace the two switch statements with an array lookup, and store the result in the dsa tree structure. The drivers no longer need to know the selected tag protocol, so remove it from the dsa switch structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Split up creating/destroying of DSA and CPU portsAndrew Lunn1-35/+51
Refactor the code to setup a single DSA/CPU port into a function of its own, and export it, so it can be used by the new binding. Similarly, refactor the destroy code into a function. When destroying the ports, don't put the of node. They should be released at the end along with the normal ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Copy the routing table into the switch structureAndrew Lunn1-0/+2
The new binding will not have a chip data structure, it will place the routing directly into the switch structure. To enable backwards compatibility, copy the routing from the chip data into the switch structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Remove dynamic allocate of routing tableAndrew Lunn1-12/+0
With a maximum of four switches, the size of the routing table is the same as the pointer to it. Removing it makes the code simpler. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Move port device node into port structureAndrew Lunn1-4/+4
Move the port device node structure into the port structure, from the chip data. This information is needed in the next step of implementing the new binding. The chip data structure is used while parsing the whole old binding, before the individual switch structures exist. With the new bindings, this is reversed, the switches exist first, and the interconnections between the switches is derived from the individual switch bindings. Thus this chip data structure becomes unneeded. Signed-off-by: Andrew Lunn <andrew@lunn.ch> eviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Add a ports structure and use it in the switch structureAndrew Lunn1-4/+4
There are going to be more per-port members added to the switch structure. So add a port structure and move the netdev into it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Rename switch chip data to cdAndrew Lunn1-9/+9
The dsa_switch structure contains a dsa_chip_data member called pd. However in the rest of the code, pd is used for dsa_platform_data. This is confusing. Rename it cd, which is already often used in dsa.c and slave.c for this data type. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Remove master_dev from switch structureAndrew Lunn1-1/+1
The switch drivers only use the master_dev member for dev_info() messages. Now that the device is passed to the old style probe, and new style drivers are probed as true linux drivers, this is no longer needed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Move gpio reset into switch driverAndrew Lunn1-16/+0
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: dsa: remove tag_protocol from dsa_switchVivien Didelot1-3/+2
Having the tag protocol in dsa_switch_driver for setup time and in dsa_switch_tree for runtime is enough. Remove dsa_switch's one. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: constify probed nameVivien Didelot1-3/+3
Change the dsa_switch_driver.probe function to return a const char *. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13dsa: Rename phys_port_mask to enabled_port_maskAndrew Lunn1-4/+4
The phys in phys_port_mask suggests this mask is about PHYs. In fact, it means physical ports. Rename to enabled_port_mask, indicating external enabled ports of the switch, which is hopefully less confusing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Remove allocation of driver private memoryAndrew Lunn1-1/+1
The drivers now allocate their own memory for private usage. Remove the allocation from the core code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Have the switch driver allocate there own private memoryAndrew Lunn1-3/+5
Now the switch devices have a dev pointer, make use of it for allocating the drivers private data structures using a devm_kzalloc(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Pass the dsa device to the switch driversAndrew Lunn1-3/+4
By passing a device structure to the switch devices, it allows them to use devm_* methods for resource management. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14phy: fixed: Fix removal of phys.Andrew Lunn1-3/+1
The fixed phys delete function simply removed the fixed phy from the internal linked list and freed the memory. It however did not unregister the associated phy device. This meant it was still possible to find the phy device on the mdio bus. Make fixed_phy_del() an internal function and add a fixed_phy_unregister() to unregisters the phy device and then uses fixed_phy_del() to free resources. Modify DSA to use this new API function, so we don't leak phys. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14dsa: dsa: Fix freeing of fixed-phys from user ports.Andrew Lunn1-3/+0
All ports types can have a fixed PHY associated with it. Remove the check which limits removal to only CPU and DSA ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14dsa: Destroy fixed link phys after the phy has been disconnectedAndrew Lunn1-12/+12
The phy is disconnected from the slave in dsa_slave_destroy(). Don't destroy fixed link phys until after this, since there can be fixed linked phys connected to ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10net: dsa: Fix cleanup resources upon module removalNeil Armstrong1-8/+8
The initial commit badly merged into the dsa_resume method instead of the dsa_remove_dst method. As consequence, the dst->master_netdev->dsa_ptr is not set to NULL on removal and re-bind of the dsa device fails with error -17. Fixes: b0dc635d923c ("net: dsa: cleanup resources upon module removal ") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn1-1/+1
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: move dsa slave destroy code to slave.cNeil Armstrong1-2/+1
Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: Add missing master netdev dev_put() callsNeil Armstrong1-1/+5
Upon probe failure or unbinding, add missing dev_put() calls. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: cleanup resources upon module removalNeil Armstrong1-0/+8
Make sure that we unassign the master_netdev dsa_ptr to make the packet processing go through the regular Ethernet receive path. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: remove DSA link pollingNeil Armstrong1-43/+0
Since no more DSA driver uses the polling callback, and since the phylib handles the link detection, remove the link polling work and timer code. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24net: dsa: include gpio consumer header fileArnd Bergmann1-0/+1
After the introduction of the switch gpio reset API, I'm getting build errors in configurations that disable CONFIG_GPIOLIB: net/dsa/dsa.c:783:16: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] The reason is that linux/gpio/consumer.h is not automatically included without gpiolib support. This adds an explicit #include statement to make it compile in all configurations. The reset functionality will not work without gpiolib, which is what you get when disabling the feature. As far as I can tell, gpiolib is supported on all architectures on which you can have DSA at the moment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cc30c16344fc ("net: dsa: Add support for a switch reset gpio") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.