aboutsummaryrefslogtreecommitdiffstats
path: root/net/dsa/legacy.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-22net: dsa: legacy: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: remove redundant null pointer check before put_devicezhong jiang1-2/+1
put_device has taken the null pinter check into account. So it is safe to remove the duplicated check before put_device. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12net: dsa: Fix dsa_is_user_port() test inversionFlorian Fainelli1-1/+1
During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: dsa: Support internal phy on 'cpu' portSebastian Reichel1-2/+2
This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: dsa: Allow compiling out legacy supportFlorian Fainelli1-20/+0
Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out support for the old platform device and Device Tree binding registration. Support for these configurations is scheduled to be removed in 4.17. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli1-1/+1
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown master deviceVivien Didelot1-18/+2
Add DSA helpers to setup and teardown a master net device wired to its CPU port. This centralizes the dsa_ptr assignment. This also makes the master ethtool helpers static at the same time. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: dsa: remove name arg from slave createVivien Didelot1-1/+1
Now that slave dsa_port always have their name set, there is no need to pass it to dsa_slave_create() anymore. Remove this argument. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: dsa: get port name at parse timeVivien Didelot1-0/+1
Get the optional "label" property and assign a default one directly at parse time instead of doing it when creating the slave. For legacy, simply assign the port name stored in cd->port_names. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: move fixed link registration helpersVivien Didelot1-2/+2
The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: remove port masksVivien Didelot1-3/+0
Now that DSA core provides port types, there is no need to keep this information at the switch level. This is a static information that is part of a DSA core dsa_port structure. Remove them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: define port typesVivien Didelot1-0/+6
Introduce an enumerated type for ports, which will be way more explicit to identify a port type instead of digging into switch port masks. A port can be of type CPU, DSA, user, or unused by default. This is a static parsed information that cannot be changed at runtime. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: introduce dsa_user_ports helperVivien Didelot1-1/+1
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: use dsa_is_user_port everywhereVivien Didelot1-2/+2
Most of the DSA code still check ds->enabled_port_mask directly to inspect a given port type instead of using the provided dsa_is_user_port helper. Change this. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26net: dsa: legacy: don't unmask port bitmapsVivien Didelot1-4/+0
The legacy code does not unmask the cpu_port_mask and dsa_port_mask as stated. But this is done on the error path and those masks won't be used after that. So instead of fixing the bit operation, simply remove it. Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: split dsa_port's netdev memberVivien Didelot1-7/+7
The dsa_port structure has a "netdev" member, which can be used for either the master device, or the slave device, depending on its type. It is true that today, CPU port are not exposed to userspace, thus the port's netdev member can be used to point to its master interface. But it is still slightly confusing, so split it into more explicit "master" and "slave" members inside an anonymous union. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: add slave to port helperVivien Didelot1-4/+2
Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: remove .set_addrVivien Didelot1-6/+0
Now that there is no user for the .set_addr function, remove it from DSA. If a switch supports this feature (like mv88e6xxx), the implementation can be done in the driver setup. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: remove tag ops from the switch treeVivien Didelot1-2/+0
Now that the dsa_ptr is a dsa_port instance, there is no need to keep the tag operations in the dsa_switch_tree structure. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: change dsa_ptr for a dsa_portVivien Didelot1-1/+1
With DSA, a master net device (CPU facing interface) has a dsa_ptr pointer to which hangs a dsa_switch_tree. This is not correct because a master interface is wired to a dedicated switch port, and because we can theoretically have several master interfaces pointing to several CPU ports of the same switch fabric. Change the master interface's dsa_ptr for the CPU dsa_port pointer. This is a step towards supporting multiple CPU ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: prepare master receive hot pathVivien Didelot1-0/+4
In preparation to make DSA master devices point to their corresponding CPU port instead of the whole tree, add copies of dst and rcv in the dsa_port structure so that we keep fast access in the receive hot path. Also keep the copies at the beginning of the dsa_port structure in order to ensure they are available in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: add tagging ops to portVivien Didelot1-0/+1
The DSA tagging protocol operations are specific to each CPU port, thus the dsa_device_ops pointer belongs to the dsa_port structure. >From now on assign a slave's xmit copy from its CPU port tagging operations. This will ease the future support for multiple CPU ports. Also keep the tag_ops at the beginning of the dsa_port structure so that we ensure copies for hot path are in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: use temporary dsa_device_ops variableVivien Didelot1-3/+5
When resolving the DSA tagging protocol used by a CPU switch, use a temporary "tag_ops" variable to store the dsa_device_ops instead of using directly dst->tag_ops. This will make the future patches moving this pointer around easier to read. There is no functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: move master ethtool codeVivien Didelot1-2/+2
DSA overrides the master device ethtool ops, so that it can inject stats from its dedicated switch CPU port as well. The related code is currently split in dsa.c and slave.c, but it only scopes the master net device. Move it to a new master.c DSA core file. This file will be later extented with master net device specific code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: setup master ethtool after dsa_ptrVivien Didelot1-7/+3
DSA overrides the master's ethtool ops so that we can inject its CPU port's statistics. Because of that, we need to setup the ethtool ops after the master's dsa_ptr pointer has been assigned, not before. This patch setups the ethtool ops after dsa_ptr is assigned, and restores them before it gets cleared. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB add/del implementation inside DSAArkadi Sharshevsky1-0/+22
Currently DSA uses switchdev's implementation of FDB add/del ndos. This patch moves the implementation inside DSA in order to support the legacy way for static FDB configuration. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: remove useless args of dsa_slave_createVivien Didelot1-1/+1
dsa_slave_create currently takes 4 arguments while it only needs the related dsa_port and its name. Remove all other arguments. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: remove useless args of dsa_cpu_dsa_setupVivien Didelot1-3/+1
dsa_cpu_dsa_setup currently takes 4 arguments but they are all available from the dsa_port argument. Remove all others. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: remove useless argument in legacy setupVivien Didelot1-8/+8
dsa_switch_alloc() already assigns ds-dev, which can be used in dsa_switch_setup_one and dsa_cpu_dsa_setups instead of requiring an additional struct device argument. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: dsa: Fix legacy probingFlorian Fainelli1-11/+8
After commit 6d3c8c0dd88a ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev") and a29342e73911 ("net: dsa: Associate slave network device with CPU port") we would be seeing NULL pointer dereferences when accessing dst->cpu_dp->netdev too early. In the legacy code, we actually know early in advance the master network device, so pass it down to the relevant functions. Fixes: 6d3c8c0dd88a ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev") Fixes: a29342e73911 ("net: dsa: Associate slave network device with CPU port") Reported-by: Jason Cobham <jcobham@questertangent.com> Tested-by: Jason Cobham <jcobham@questertangent.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Associate slave network device with CPU portFlorian Fainelli1-0/+1
In preparation for supporting multiple CPU ports with DSA, have the dsa_port structure know which CPU it is associated with. This will be important in order to make sure the correct CPU is used for transmission of the frames. If not for functional reasons, for performance (e.g: load balancing) and forwarding decisions. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli1-9/+13
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-47/+0
Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net: dsa: Pass dsa_port reference to ethtool setup/restoreFlorian Fainelli1-2/+2
We do not need to have a reference to a dsa_switch, instead we should pass a reference to a CPU dsa_port, change that. This is a preliminary change to better support multiple CPU ports. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02net: dsa: Move dsa_switch_{suspend,resume} out of legacy.cFlorian Fainelli1-47/+0
dsa_switch_suspend() and dsa_switch_resume() are functions that belong in net/dsa/dsa.c and are not part of the legacy platform support code. Fixes: a6a71f19fe5e ("net: dsa: isolate legacy code") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: dsa: do not cast dstVivien Didelot1-1/+1
dsa_ptr is not a void pointer anymore since Nov 2011, as of cf50dcc24f82 ("dsa: Change dsa_uses_{dsa, trailer}_tags() into inline functions"), but an explicit dsa_switch_tree pointer, thus remove the (void *) cast. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include dsa.h only onceVivien Didelot1-1/+1
The public include/net/dsa.h file is meant for DSA drivers, while all DSA core files share a common private header net/dsa/dsa_priv.h file. Ensure that dsa_priv.h is the only DSA core file to include net/dsa.h, and add a new line to separate absolute and relative headers at the same time. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot1-6/+4
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: dsa: isolate legacy codeVivien Didelot1-0/+818
This patch moves as is the legacy DSA code from dsa.c to legacy.c, except the few shared symbols which remain in dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.