aboutsummaryrefslogtreecommitdiffstats
path: root/net/dsa (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-12net: dsa: Initialize DSA_SKB_CB(skb)->deferred_xmit variableVladimir Oltean1-0/+2
The sk_buff control block can have any contents on xmit put there by the stack, so initialization is mandatory, since we are checking its value after the actual DSA xmit (the tagger may have changed it). The DSA_SKB_ZERO() macro could have been used for this purpose, but: - Zeroizing a 48-byte memory region in the hotpath is best avoided. - It would have triggered a warning with newer compilers since __dsa_skb_cb contains a structure within a structure, and the {0} initializer was incorrect for that purpose. So simply remove the DSA_SKB_ZERO() macro and initialize the deferred_xmit variable by hand (which should be done for all further dsa_skb_cb variables which need initialization - currently none - to avoid the performance penalty). Fixes: 97a69a0dea9a ("net: dsa: Add support for deferred xmit") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-10dsa: tag_brcm: Fix build error without CONFIG_NET_DSA_TAG_BRCM_PREPENDYueHaibing1-1/+1
Fix gcc build error: net/dsa/tag_brcm.c:211:16: error: brcm_prepend_netdev_ops undeclared here (not in a function); did you mean brcm_netdev_ops? DSA_TAG_DRIVER(brcm_prepend_netdev_ops); ^ ./include/net/dsa.h:708:10: note: in definition of macro DSA_TAG_DRIVER .ops = &__ops, \ ^~~~~ ./include/net/dsa.h:701:36: warning: dsa_tag_driver_brcm_prepend_netdev_ops defined but not used [-Wunused-variable] #define DSA_TAG_DRIVER_NAME(__ops) dsa_tag_driver ## _ ## __ops ^ ./include/net/dsa.h:707:30: note: in expansion of macro DSA_TAG_DRIVER_NAME static struct dsa_tag_driver DSA_TAG_DRIVER_NAME(__ops) = { \ ^~~~~~~~~~~~~~~~~~~ net/dsa/tag_brcm.c:211:1: note: in expansion of macro DSA_TAG_DRIVER DSA_TAG_DRIVER(brcm_prepend_netdev_ops); Like the CONFIG_NET_DSA_TAG_BRCM case, brcm_prepend_netdev_ops and DSA_TAG_PROTO_BRCM_PREPEND should be wrappeed by CONFIG_NET_DSA_TAG_BRCM_PREPEND. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b74b70c44986 ("net: dsa: Support prepended Broadcom tag") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+6
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: Fix error cleanup path in dsa_init_moduleYueHaibing1-2/+9
BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: sja1105: Add support for traffic through standalone portsVladimir Oltean3-0/+141
In order to support this, we are creating a make-shift switch tag out of a VLAN trunk configured on the CPU port. Termination of normal traffic on switch ports only works when not under a vlan_filtering bridge. Termination of management (PTP, BPDU) traffic works under all circumstances because it uses a different tagging mechanism (incl_srcpt). We are making use of the generic CONFIG_NET_DSA_TAG_8021Q code and leveraging it from our own CONFIG_NET_DSA_TAG_SJA1105. There are two types of traffic: regular and link-local. The link-local traffic received on the CPU port is trapped from the switch's regular forwarding decisions because it matched one of the two DMAC filters for management traffic. On transmission, the switch requires special massaging for these link-local frames. Due to a weird implementation of the switching IP, by default it drops link-local frames that originate on the CPU port. It needs to be told where to forward them to, through an SPI command ("management route") that is valid for only a single frame. So when we're sending link-local traffic, we are using the dsa_defer_xmit mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Add support for deferred xmitVladimir Oltean2-12/+54
Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Allow drivers to filter packets they can decode source port fromVladimir Oltean1-0/+1
Frames get processed by DSA and redirected to switch port net devices based on the ETH_P_XDSA multiplexed packet_type handler found by the network stack when calling eth_type_trans(). The running assumption is that once the DSA .rcv function is called, DSA is always able to decode the switch tag in order to change the skb->dev from its master. However there are tagging protocols (such as the new DSA_TAG_PROTO_SJA1105, user of DSA_TAG_PROTO_8021Q) where this assumption is not completely true, since switch tagging piggybacks on the absence of a vlan_filtering bridge. Moreover, management traffic (BPDU, PTP) for this switch doesn't rely on switch tagging, but on a different mechanism. So it would make sense to at least be able to terminate that. Having DSA receive traffic it can't decode would put it in an impossible situation: the eth_type_trans() function would invoke the DSA .rcv(), which could not change skb->dev, then eth_type_trans() would be invoked again, which again would call the DSA .rcv, and the packet would never be able to exit the DSA filter and would spiral in a loop until the whole system dies. This happens because eth_type_trans() doesn't actually look at the skb (so as to identify a potential tag) when it deems it as being ETH_P_XDSA. It just checks whether skb->dev has a DSA private pointer installed (therefore it's a DSA master) and that there exists a .rcv callback (everybody except DSA_TAG_PROTO_NONE has that). This is understandable as there are many switch tags out there, and exhaustively checking for all of them is far from ideal. The solution lies in introducing a filtering function for each tagging protocol. In the absence of a filtering function, all traffic is passed to the .rcv DSA callback. The tagging protocol should see the filtering function as a pre-validation that it can decode the incoming skb. The traffic that doesn't match the filter will bypass the DSA .rcv callback and be left on the master netdevice, which wasn't previously possible. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Optional VLAN-based port separation for switches without taggingVladimir Oltean3-0/+234
This patch provides generic DSA code for using VLAN (802.1Q) tags for the same purpose as a dedicated switch tag for injection/extraction. It is based on the discussions and interest that has been so far expressed in https://www.spinics.net/lists/netdev/msg556125.html. Unlike all other DSA-supported tagging protocols, CONFIG_NET_DSA_TAG_8021Q does not offer a complete solution for drivers (nor can it). Instead, it provides generic code that driver can opt into calling: - dsa_8021q_xmit: Inserts a VLAN header with the specified contents. Can be called from another tagging protocol's xmit function. Currently the LAN9303 driver is inserting headers that are simply 802.1Q with custom fields, so this is an opportunity for code reuse. - dsa_8021q_rcv: Retrieves the TPID and TCI from a VLAN-tagged skb. Removing the VLAN header is left as a decision for the caller to make. - dsa_port_setup_8021q_tagging: For each user port, installs an Rx VID and a Tx VID, for proper untagged traffic identification on ingress and steering on egress. Also sets up the VLAN trunk on the upstream (CPU or DSA) port. Drivers are intentionally left to call this function explicitly, depending on the context and hardware support. The expected switch behavior and VLAN semantics should not be violated under any conditions. That is, after calling dsa_port_setup_8021q_tagging, the hardware should still pass all ingress traffic, be it tagged or untagged. For uniformity with the other tagging protocols, a module for the dsa_8021q_netdev_ops structure is registered, but the typical usage is to set up another tagging protocol which selects CONFIG_NET_DSA_TAG_8021Q, and calls the API from tag_8021q.h. Null function definitions are also provided so that a "depends on" is not forced in the Kconfig. This tagging protocol only works when switch ports are standalone, or when they are added to a VLAN-unaware bridge. It will probably remain this way for the reasons below. When added to a bridge that has vlan_filtering 1, the bridge core will install its own VLANs and reset the pvids through switchdev. For the bridge core, switchdev is a write-only pipe. All VLAN-related state is kept in the bridge core and nothing is read from DSA/switchdev or from the driver. So the bridge core will break this port separation because it will install the vlan_default_pvid into all switchdev ports. Even if we could teach the bridge driver about switchdev preference of a certain vlan_default_pvid (task difficult in itself since the current setting is per-bridge but we would need it per-port), there would still exist many other challenges. Firstly, in the DSA rcv callback, a driver would have to perform an iterative reverse lookup to find the correct switch port. That is because the port is a bridge slave, so its Rx VID (port PVID) is subject to user configuration. How would we ensure that the user doesn't reset the pvid to a different value (which would make an O(1) translation impossible), or to a non-unique value within this DSA switch tree (which would make any translation impossible)? Finally, not all switch ports are equal in DSA, and that makes it difficult for the bridge to be completely aware of this anyway. The CPU port needs to transmit tagged packets (VLAN trunk) in order for the DSA rcv code to be able to decode source information. But the bridge code has absolutely no idea which switch port is the CPU port, if nothing else then just because there is no netdevice registered by DSA for the CPU port. Also DSA does not currently allow the user to specify that they want the CPU port to do VLAN trunking anyway. VLANs are added to the CPU port using the same flags as they were added on the user port. So the VLANs installed by dsa_port_setup_8021q_tagging per driver request should remain private from the bridge's and user's perspective, and should not alter the VLAN semantics observed by the user. In the current implementation a VLAN range ending at 4095 (VLAN_N_VID) is reserved for this purpose. Each port receives a unique Rx VLAN and a unique Tx VLAN. Separate VLANs are needed for Rx and Tx because they serve different purposes: on Rx the switch must process traffic as untagged and process it with a port-based VLAN, but with care not to hinder bridging. On the other hand, the Tx VLAN is where the reachability restrictions are imposed, since by tagging frames in the xmit callback we are telling the switch onto which port to steer the frame. Some general guidance on how this support might be employed for real-life hardware (some comments made by Florian Fainelli): - If the hardware supports VLAN tag stacking, it should somehow back up its private VLAN settings when the bridge tries to override them. Then the driver could re-apply them as outer tags. Dedicating an outer tag per bridge device would allow identical inner tag VID numbers to co-exist, yet preserve broadcast domain isolation. - If the switch cannot handle VLAN tag stacking, it should disable this port separation when added as slave to a vlan_filtering bridge, in that case having reduced functionality. - Drivers for old switches that don't support the entire VLAN_N_VID range will need to rework the current range selection mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Export symbols for dsa_port_vid_{add, del}Vladimir Oltean1-0/+2
This is needed so that the newly introduced tag_8021q may access these core DSA functions when built as a module. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Call driver's setup callback after setting up its switchdev notifierVladimir Oltean1-4/+4
This allows the driver to perform some manipulations of its own during setup, using generic switchdev calls. Having the notifiers registered at setup time is important because otherwise any switchdev transaction emitted during this time would be ignored (dispatched to an empty call chain). One current usage scenario is for the driver to request DSA to set up 802.1Q based switch tagging for its ports. There is no danger for the driver setup code to start racing now with switchdev events emitted from the network stack (such as bridge core) even if the notifier is registered earlier. This is because the network stack needs a net_device as a vehicle to perform switchdev operations, and the slave net_devices are registered later than the core driver setup anyway (ds->ops->setup in dsa_switch_setup vs dsa_port_setup). Luckily DSA doesn't need a net_device to carry out switchdev callbacks, and therefore drivers shouldn't assume either that net_devices are available at the time their switchdev callbacks get invoked. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>- Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net/dsa: use intermediate representation for matchall offloadPieter Jansen van Vuuren1-9/+7
Updates dsa hardware switch handling infrastructure to use the newer intermediate representation for flow actions in matchall offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Remove legacy probing supportAndrew Lunn5-774/+0
Now that all drivers can be probed using more traditional methods, remove the legacy probe code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Add more convenient functions for installing port VLANsVladimir Oltean3-21/+36
This hides the need to perform a two-phase transaction and construct a switchdev_obj_port_vlan struct. Call graph (including a function that will be introduced in a follow-up patch) looks like this now (same for the *_vlan_del function): dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Skip calling .port_vlan_filtering on no changeVladimir Oltean1-0/+3
Even if VLAN filtering is global, DSA will call this callback once per each port. Drivers should not have to compare the global state with the requested change. So let DSA do it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Keep the vlan_filtering setting in dsa_switch if it's globalVladimir Oltean1-1/+4
The current behavior is not as obvious as one would assume (which is that, if the driver set vlan_filtering_is_global = 1, then checking any dp->vlan_filtering would yield the same result). Only the ports which are actively enslaved into a bridge would have vlan_filtering set. This makes it tricky for drivers to check what the global state is. So fix this and make the struct dsa_switch hold this global setting. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Unset vlan_filtering when ports leave the bridgeVladimir Oltean1-0/+29
When ports are standalone (after they left the bridge), they should have no VLAN filtering semantics (they should pass all traffic to the CPU). Currently this is not true for switchdev drivers, because the bridge "forgets" to unset that. Normally one would think that doing this at the bridge layer would be a better idea, i.e. call br_vlan_filter_toggle() from br_del_if(), similar to how nbp_vlan_init() is called from br_add_if(). However what complicates that approach, and makes this one preferable, is the fact that for the bridge core, vlan_filtering is a per-bridge setting, whereas for switchdev/DSA it is per-port. Also there are switches where the setting is per the entire device, and unsetting vlan_filtering one by one, for each leaving port, would not be possible from the bridge core without a certain level of awareness. So do this in DSA and let drivers be unaware of it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Be aware of switches where VLAN filtering is a global settingVladimir Oltean1-7/+45
On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Store vlan_filtering as a property of dsa_portVladimir Oltean1-4/+8
This allows drivers to query the VLAN setting imposed by the bridge driver directly from DSA, instead of keeping their own state based on the .port_vlan_filtering callback. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Fix pharse -> phase typoVladimir Oltean1-1/+1
Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Allow tag drivers to be built as modulesAndrew Lunn2-29/+73
Make the CONFIG symbols tristate and add help text. The broadcom and Microchip KSZ tag drivers support two different tagging protocols in one driver. Add a configuration option for the drivers, and then options to select the protocol. Create a submenu for the tagging drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: tab/space cleanup Help text wording NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden v3: More tabification Punctuation v4: trailler->trailer Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: tag_brcm: Avoid unused symbolsAndrew Lunn1-2/+6
It is possible that the driver is compiled with both CONFIG_NET_DSA_TAG_BRCM and CONFIG_NET_DSA_TAG_BRCM_PREPEND disabled. This results in warnings about unused symbols. Add some conditional compilation to avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2 Reorder patch to before tag drivers can be modules Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Cleanup unneeded table and make tag structures staticAndrew Lunn11-76/+11
Now that tag drivers dynamically register, we don't need the static table. Remove it. This also means the tag driver structures can be made static. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Make use of the list of tag driversAndrew Lunn1-5/+34
Implement the _get and _put functions to make use of the list of tag drivers. Also, trigger the loading of the module, based on the alias information. The _get function takes a reference on the tag driver, so it cannot be unloaded, and the _put function releases the reference. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2: Make tag_driver_register void Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Add stub tag driver put methodAndrew Lunn4-0/+9
When a DSA switch driver is unloaded, the lock on the tag driver should be released so the module can be unloaded. Add the needed calls, but leave the actual release code as a stub. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2 Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Rename dsa_resolve_tag_protocol() to _get ready for lockingAndrew Lunn4-4/+5
dsa_resolve_tag_protocol() is used to find the tagging driver needed by a switch driver. When the tagging drivers become modules, it will be necassary to take a reference on the module to prevent it being unloaded. So rename this function to _get() to indicate it has some locking properties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Register the none tagger opsAndrew Lunn1-0/+7
The none tagger is special in that it does not live in a tag_*.c file, but is within the core. Register/unregister when DSA is loaded/unloaded. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Keep link list of tag driversAndrew Lunn1-0/+28
Let the tag drivers register themselves with the DSA core, keeping them in a linked list. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Add boilerplate helper to register DSA tag driver modulesAndrew Lunn10-2/+52
A DSA tag driver module will need to register the tag protocols it implements with the DSA core. Add macros containing this boiler plate. The registration/unregistration code is currently just a stub. A Later patch will add the real implementation. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2 Fix indent of #endif Rewrite to move list pointer into a new structure v3 Move kdoc next to macro Fix THIS_MODULE indentation Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Add TAG protocol to tag opsAndrew Lunn10-0/+12
In order that we can match the tagging protocol a switch driver request to the tagger, we need to know what protocol the tagger supports. Add this information to the ops structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2 More tag protocol to end of structure to keep hot members at the beginning. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Add MODULE_LICENSE to tag driversAndrew Lunn9-0/+9
All the tag drivers are some variant of GPL. Add a MODULE_LICENSE() indicating this, so the drivers can later be compiled as modules. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Add MODULE_ALIAS to taggers in preparation to become modulesAndrew Lunn9-0/+22
When the tag drivers become modules, we will need to dynamically load them based on what the switch drivers need. Add aliases to map between the TAG protocol and the driver. In order to do this, we need the tag protocol number as something which the C pre-processor can stringinfy. Only the compiler knows the value of an enum, CPP cannot use them. So add #defines. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Move tagger name into its ops structureAndrew Lunn10-43/+13
Rather than keep a list to map a tagger ops to a name, place the name into the ops structure. This removes the hard coded list, a step towards making the taggers more dynamic. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2: Move name to end of structure, keeping the hot entries at the beginning. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Add SPDX header to tag drivers.Andrew Lunn8-52/+8
Add an SPDX header, and remove the license boilerplate text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+10
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04dsa: pass switch ID through devlink_port_attrs_set()Jiri Pirko2-1/+10
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Leave ndo_get_port_parent_id implementation only for legacy. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: devlink: extend port attrs for switch IDJiri Pirko1-1/+1
Extend devlink_port_attrs_set() to pass switch ID for ports which are part of switch and store it in port attrs. For other ports, this is NULL. Note that this allows the driver to group devlink ports into one or more switches according to the actual topology. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: dsa: read mac address from DT for slave deviceXiaofei Shen2-1/+5
Before creating a slave netdevice, get the mac address from DTS and apply in case it is valid. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: dsa: Implement flow_dissect callback for tag_qcaxiaofeis1-0/+10
Add flow_dissect for qca tagged packet to get the right hash. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28dsa: do not support ndo_get_phys_port_name for non-legacy portsJiri Pirko1-0/+7
Since each non-legacy slave has its own devlink port instance correctly set, rely on devlink core to generate correct phys port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28dsa: implement ndo_get_devlink_portJiri Pirko1-0/+8
In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: Avoid null pointer when failing to connect to PHYVladimir Oltean1-4/+4
When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the day by connecting to an alternative PHY, none other than a PHY on the switch's internal MDIO bus, at an address equal to the port's index. However this does not take into consideration the scenario when the switch that failed to probe an external PHY does not have an internal MDIO bus at all. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24net: devlink: select NET_DEVLINK from driversJiri Pirko1-0/+1
Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24dsa: move devlink_port_attrs_set() call before registerJiri Pirko1-21/+26
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24dsa: add missing net/devlink.h includeJiri Pirko1-0/+1
devlink functions are in use, so include the related header file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: dsa: Use prepare/commit phase in dsa_slave_vlan_rx_add_vid()Florian Fainelli1-3/+6
We were skipping the prepare phase which causes some problems with at least a couple of drivers: - mv88e6xxx chooses to skip programming VID = 0 with -EOPNOTSUPP in the prepare phase, but we would still try to force this VID since we would only call the commit phase and so we would get the driver to return -EINVAL instead - qca8k does not currently have a port_vlan_add() callback implemented, yet we would try to call that unconditionally leading to a NPD Fix both issues by conforming to the current model doing a prepare/commit phase, this makes us consistent throughout the code and assumptions. Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Michal Vokáč <michal.vokac@ysoft.com> Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: dsa: add KSZ9893 switch tagging supportTristram Ha3-0/+37
KSZ9893 switch is similar to KSZ9477 switch except the ingress tail tag has 1 byte instead of 2 bytes. The size of the portmap is smaller and so the override and lookup bits are also moved. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+11
2019-02-27net: Remove switchdev_opsFlorian Fainelli1-5/+0
Now that we have converted all possible callers to using a switchdev notifier for attributes we do not have a need for implementing switchdev_ops anymore, and this can be removed from all drivers the net_device structure. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: dsa: Handle SWITCHDEV_PORT_ATTR_SETFlorian Fainelli1-0/+18
Following patches will change the way we communicate setting a port's attribute and use notifiers towards that goal. Prepare DSA to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET from both atomic and process context and use a small helper to translate the event notifier into something that dsa_slave_port_attr_set() can process. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.