aboutsummaryrefslogtreecommitdiffstats
path: root/net/dsa (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+6
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19dsa: set devlink port attrs for dsa portsJiri Pirko1-0/+24
Set the attrs and allow to expose port flavour to user via devlink. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: dsa: Do not register devlink for unused portsFlorian Fainelli1-3/+6
Even if commit 1d27732f411d ("net: dsa: setup and teardown ports") indicated that registering a devlink instance for unused ports is not a problem, and this is true, this can be confusing nonetheless, so let's not do it. Fixes: 1d27732f411d ("net: dsa: setup and teardown ports") Reported-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Plug in PHYLINK supportFlorian Fainelli2-132/+171
Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Eliminate dsa_slave_get_link()Florian Fainelli1-11/+1
Since we use PHYLIB to manage the per-port link indication, this will also be reflected correctly in the network device's carrier state, so we can use ethtool_op_get_link() instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Add PHYLINK switch operationsFlorian Fainelli2-1/+6
In preparation for adding support for PHYLINK within DSA, define a number of operations that we will need and that switch drivers can start implementing. Proper integration with PHYLINK will follow in subsequent patches. We start selecting PHYLINK (which implies PHYLIB) in net/dsa/Kconfig such that drivers can be guaranteed that this dependency is properly taken care of and can start referencing PHYLINK helper functions without requiring stubs or anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: fix added_by_user switchdev notificationVivien Didelot1-5/+7
Commit 161d82de1ff8 ("net: bridge: Notify about !added_by_user FDB entries") causes the below oops when bringing up a slave interface, because dsa_port_fdb_add is still scheduled, but with a NULL address. To fix this, keep the dsa_slave_switchdev_event function agnostic of the notified info structure and handle the added_by_user flag in the specific dsa_slave_switchdev_event_work function. [ 75.512263] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 75.519063] pgd = (ptrval) [ 75.520545] [00000000] *pgd=00000000 [ 75.522839] Internal error: Oops: 17 [#1] ARM [ 75.525898] Modules linked in: [ 75.527673] CPU: 0 PID: 9 Comm: kworker/u2:1 Not tainted 4.17.0-rc2 #78 [ 75.532988] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 75.538153] Workqueue: dsa_ordered dsa_slave_switchdev_event_work [ 75.542970] PC is at mv88e6xxx_port_db_load_purge+0x60/0x1b0 [ 75.547341] LR is at mdiobus_read_nested+0x6c/0x78 [ 75.550833] pc : [<804cd5c0>] lr : [<804bba84>] psr: 60070013 [ 75.555796] sp : 9f54bd78 ip : 9f54bd87 fp : 9f54bddc [ 75.559719] r10: 00000000 r9 : 0000000e r8 : 9f6a6010 [ 75.563643] r7 : 00000000 r6 : 81203048 r5 : 9f6a6010 r4 : 9f6a601c [ 75.568867] r3 : 00000000 r2 : 00000000 r1 : 0000000d r0 : 00000000 [ 75.574094] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 75.579933] Control: 10c53c7d Table: 9de20059 DAC: 00000051 [ 75.584384] Process kworker/u2:1 (pid: 9, stack limit = 0x(ptrval)) [ 75.589349] Stack: (0x9f54bd78 to 0x9f54c000) [ 75.592406] bd60: 00000000 00000000 [ 75.599295] bd80: 00000391 9f299d10 9f299d68 8014317c 9f7f0000 8120af00 00006dc2 00000000 [ 75.606186] bda0: 8120af00 00000000 9f54bdec 1c9f5d92 8014317c 9f6a601c 9f6a6010 00000000 [ 75.613076] bdc0: 00000000 00000000 9dd1141c 8125a0b4 9f54be0c 9f54bde0 804cd8a8 804cd56c [ 75.619966] bde0: 0000000e 80143680 00000001 9dce9c1c 81203048 9dce9c10 00000003 00000000 [ 75.626858] be00: 9f54be5c 9f54be10 806abcac 804cd864 9f54be54 80143664 8014317c 80143054 [ 75.633748] be20: ffcaa81d 00000000 812030b0 1c9f5d92 00000000 81203048 9f54beb4 00000003 [ 75.640639] be40: ffffffff 00000000 9dd1141c 8125a0b4 9f54be84 9f54be60 80138e98 806abb18 [ 75.647529] be60: 81203048 9ddc4000 9dce9c54 9f72a300 00000000 00000000 9f54be9c 9f54be88 [ 75.654420] be80: 801390bc 80138e50 00000000 9dce9c54 9f54beac 9f54bea0 806a9524 801390a0 [ 75.661310] bea0: 9f54bedc 9f54beb0 806a9c7c 806a950c 9f54becc 00000000 00000000 00000000 [ 75.668201] bec0: 9f540000 1c9f5d92 805fe604 9ddffc00 9f54befc 9f54bee0 806ab228 806a9c38 [ 75.675092] bee0: 806ab178 9ddffc00 9f4c1900 9f40d200 9f54bf34 9f54bf00 80131e30 806ab184 [ 75.681983] bf00: 9f40d214 9f54a038 9f40d200 9f40d200 9f4c1918 812119a0 9f40d214 9f54a038 [ 75.688873] bf20: 9f40d200 9f4c1900 9f54bf7c 9f54bf38 80132124 80131d1c 9f5f2dd8 00000000 [ 75.695764] bf40: 812119a0 9f54a038 812119a0 81259c5b 9f5f2dd8 9f5f2dc0 9f53dbc0 00000000 [ 75.702655] bf60: 9f4c1900 801320b4 9f5f2dd8 9f4f7e88 9f54bfac 9f54bf80 80137ad0 801320c0 [ 75.709544] bf80: 9f54a000 9f53dbc0 801379a0 00000000 00000000 00000000 00000000 00000000 [ 75.716434] bfa0: 00000000 9f54bfb0 801010e8 801379ac 00000000 00000000 00000000 00000000 [ 75.723324] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 75.730206] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 75.737083] Backtrace: [ 75.738252] [<804cd560>] (mv88e6xxx_port_db_load_purge) from [<804cd8a8>] (mv88e6xxx_port_fdb_add+0x50/0x68) [ 75.746795] r10:8125a0b4 r9:9dd1141c r8:00000000 r7:00000000 r6:00000000 r5:9f6a6010 [ 75.753323] r4:9f6a601c [ 75.754570] [<804cd858>] (mv88e6xxx_port_fdb_add) from [<806abcac>] (dsa_switch_event+0x1a0/0x660) [ 75.762238] r8:00000000 r7:00000003 r6:9dce9c10 r5:81203048 r4:9dce9c1c [ 75.767655] [<806abb0c>] (dsa_switch_event) from [<80138e98>] (notifier_call_chain+0x54/0x94) [ 75.774893] r10:8125a0b4 r9:9dd1141c r8:00000000 r7:ffffffff r6:00000003 r5:9f54beb4 [ 75.781423] r4:81203048 [ 75.782672] [<80138e44>] (notifier_call_chain) from [<801390bc>] (raw_notifier_call_chain+0x28/0x30) [ 75.790514] r9:00000000 r8:00000000 r7:9f72a300 r6:9dce9c54 r5:9ddc4000 r4:81203048 [ 75.796982] [<80139094>] (raw_notifier_call_chain) from [<806a9524>] (dsa_port_notify+0x24/0x38) [ 75.804483] [<806a9500>] (dsa_port_notify) from [<806a9c7c>] (dsa_port_fdb_add+0x50/0x6c) [ 75.811371] [<806a9c2c>] (dsa_port_fdb_add) from [<806ab228>] (dsa_slave_switchdev_event_work+0xb0/0x10c) [ 75.819635] r4:9ddffc00 [ 75.820885] [<806ab178>] (dsa_slave_switchdev_event_work) from [<80131e30>] (process_one_work+0x120/0x3a4) [ 75.829241] r6:9f40d200 r5:9f4c1900 r4:9ddffc00 r3:806ab178 [ 75.833612] [<80131d10>] (process_one_work) from [<80132124>] (worker_thread+0x70/0x574) [ 75.840415] r10:9f4c1900 r9:9f40d200 r8:9f54a038 r7:9f40d214 r6:812119a0 r5:9f4c1918 [ 75.846945] r4:9f40d200 [ 75.848191] [<801320b4>] (worker_thread) from [<80137ad0>] (kthread+0x130/0x160) [ 75.854300] r10:9f4f7e88 r9:9f5f2dd8 r8:801320b4 r7:9f4c1900 r6:00000000 r5:9f53dbc0 [ 75.860830] r4:9f5f2dc0 [ 75.862076] [<801379a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) [ 75.867999] Exception stack(0x9f54bfb0 to 0x9f54bff8) [ 75.871753] bfa0: 00000000 00000000 00000000 00000000 [ 75.878640] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 75.885519] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 75.890844] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801379a0 [ 75.897377] r4:9f53dbc0 r3:9f54a000 [ 75.899663] Code: e3a02000 e3a03000 e14b26f4 e24bc055 (e5973000) [ 75.904575] ---[ end trace fbca818a124dbf0d ]--- Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03switchdev: Add fdb.added_by_user to switchdev notificationsPetr Machata1-1/+4
The following patch enables sending notifications also for events on FDB entries that weren't added by the user. Give the drivers the information necessary to distinguish between the two origins of FDB entries. To maintain the current behavior, have switchdev-implementing drivers bail out on notifications about non-user-added FDB entries. In case of mlxsw driver, allow a call to mlxsw_sp_span_respin() so that SPAN over bridge catches up with the changed FDB. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27net: dsa: Allow providing PHY statistics from CPU portFlorian Fainelli2-5/+99
Implement the same type of ethtool diversion that we have for ETH_SS_STATS and make it work with ETH_SS_PHY_STATS. This allows providing PHY level statistics for CPU ports that are directly connecting to a PHY device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27net: dsa: Add helper function to obtain PHY device of a given portFlorian Fainelli1-11/+22
In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27net: dsa: Pass stringset to ethtool operationsFlorian Fainelli2-10/+16
Up until now we largely assumed that we were interested in ETH_SS_STATS type of strings for all ethtool operations, this is about to change with the introduction of additional string sets, e.g: ETH_SS_PHY_STATS. Update all functions to take an appropriate stringset argument and act on it when it is different than ETH_SS_STATS for now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27net: dsa: Do not check for ethtool_ops validityFlorian Fainelli1-3/+3
This is completely redundant with what netdev_set_default_ethtool_ops() does, we are always guaranteed to have a valid dev->ethtool_ops pointer, however, within that structure, not all function calls may be populated, so we still have to check them individually. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08net: dsa: Discard frames from unused portsAndrew Lunn1-1/+7
The Marvell switches under some conditions will pass a frame to the host with the port being the CPU port. Such frames are invalid, and should be dropped. Not dropping them can result in a crash when incrementing the receive statistics for an invalid port. Reported-by: Chris Healy <cphealy@gmail.com> Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12net: dsa: Fix dsa_is_user_port() test inversionFlorian Fainelli1-1/+1
During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04dsa: Pass the port to get_sset_count()Andrew Lunn2-3/+3
By passing the port, we allow different ports to have different statistics. This is useful since some ports have SERDES interfaces with their own statistic counters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14net: dsa: forward timestamping callbacks to switch driversBrandon Streiff2-0/+66
Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14net: dsa: forward hardware timestamping ioctls to switch driverBrandon Streiff1-0/+29
This patch adds support to the dsa slave network device so that switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the ethtool timestamp-info interface. Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: dsa: Support internal phy on 'cpu' portSebastian Reichel4-32/+86
This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05net: dsa: Move padding into Broadcom taggerFlorian Fainelli1-0/+12
Instead of having the different master network device drivers potentially used by DSA/Broadcom tags, move the padding necessary for the switches to accept short packets where it makes most sense: within tag_brcm.c. This avoids multiplying the number of similar commits to e.g: bgmac, bcmsysport, etc. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: dsa: Fix dsa_legacy_register() return valueFlorian Fainelli1-1/+1
We need to make the dsa_legacy_register() stub return 0 in order for dsa_init_module() to successfully register and continue registering the ETH_P_XDSA packet handler. Fixes: 2a93c1a3651f ("net: dsa: Allow compiling out legacy support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Three sets of overlapping changes, two in the packet scheduler and one in the meson-gxl PHY driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: dsa: mediatek: combine MediaTek tag with VLAN tagSean Wang1-9/+29
In order to let MT7530 switch can recognize well those egress packets having both special tag and VLAN tag, the information about the special tag should be carried on the existing VLAN tag. On the other hand, it's unnecessary for extra handling for ingress packets when VLAN tag is present since it is able to put the VLAN tag after the special tag and then follow the existing way to parse. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net: remove duplicate includesPravin Shedge1-1/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: dsa: Allow compiling out legacy supportFlorian Fainelli5-21/+40
Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out support for the old platform device and Device Tree binding registration. Support for these configurations is scheduled to be removed in 4.17. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-06act_mirred: get rid of tcfm_ifindex from struct tcf_mirredCong Wang1-4/+1
tcfm_dev always points to the correct netdev and we already hold a refcnt, so no need to use tcfm_ifindex to lookup again. If we would support moving target netdev across netns, using pointer would be better than ifindex. This also fixes dumping obsolete ifindex, now after the target device is gone we just dump 0 as ifindex. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05net: dsa: assign a CPU port to DSA portVivien Didelot1-1/+1
DSA ports also need to have a dedicated CPU port assigned to them, because they need to know where to egress frames targeting the CPU, e.g. To_Cpu frames received on a Marvell Tag port. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: support cross-chip FDB operationsVivien Didelot1-10/+4
When a MAC address is added to or removed from a switch port in the fabric, the target switch must program its port and adjacent switches must program their local DSA port used to reach the target switch. For this purpose, use the dsa_towards_port() helper to identify the local switch port which must be programmed. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: add switch mdb bitmap functionsVivien Didelot1-15/+33
This patch brings no functional changes. It moves out the MDB code iterating on a multicast group into new dsa_switch_mdb_{prepare,add}_bitmap() functions. This gives us a better isolation of the two switchdev phases. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: add switch vlan bitmap functionsVivien Didelot1-15/+34
This patch brings no functional changes. It moves out the VLAN code iterating on a list of VLAN members into new dsa_switch_vlan_{prepare,add}_bitmap() functions. This gives us a better isolation of the two switchdev phases. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: remove trans argument from mdb opsVivien Didelot1-2/+2
The DSA switch MDB ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from MDB prepare and add operations. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: remove trans argument from vlan opsVivien Didelot1-2/+2
The DSA switch VLAN ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from VLAN prepare and add operations. At the same time, fix the following checkpatch warning: WARNING: line over 80 characters #74: FILE: drivers/net/dsa/dsa_loop.c:177: + const struct switchdev_obj_port_vlan *vlan) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-26net: dsa: fix 'increment on 0' warningVivien Didelot1-11/+14
Setting the refcount to 0 when allocating a tree to match the number of switch devices it holds may cause an 'increment on 0; use-after-free', if CONFIG_REFCOUNT_FULL is enabled. To fix this, do not decrement the refcount of a newly allocated tree, increment it when an already allocated tree is found, and decrement it after the probing of a switch, as done with the previous behavior. At the same time, make dsa_tree_get and dsa_tree_put accept a NULL argument to simplify callers, and return the tree after incrementation, as most kref users like of_node_get and of_node_put do. Fixes: 8e5bf9759a06 ("net: dsa: simplify tree reference counting") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: dsa: lan9303: calculate offload_fwd_mark from tagEgil Hjelmeland1-16/+8
The lan9303 set bits in the host CPU tag indicating if a ingress frame is a trapped IGMP or STP frame. Use these bits to calculate skb->offload_fwd_mark more efficiently. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: dsa: Fix dependencies on bridgeAndrew Lunn1-0/+1
DSA now uses one of the symbols exported by the bridge, br_vlan_enabled(). This has a stub, if the bridge is not enabled. However, if the bridge is enabled, we cannot have DSA built in and the bridge as a module, otherwise we get undefined symbols at link time: net/dsa/port.o: In function `dsa_port_vlan_add': net/dsa/port.c:255: undefined reference to `br_vlan_enabled' net/dsa/port.o: In function `dsa_port_vlan_del': net/dsa/port.c:270: undefined reference to `br_vlan_enabled' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Support prepended Broadcom tagFlorian Fainelli5-7/+40
Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the 4-bytes Broadcom tag that we already support, but in a format where it is pre-pended to the packet instead of located between the MAC SA and the Ethertyper (DSA_TAG_PROTO_BRCM). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: tag_brcm: Prepare for supporting prepended tagFlorian Fainelli1-11/+34
In preparation for supporting the same Broadcom tag format, but instead of inserted between the MAC SA and EtherType, prepended to the Ethernet frame, restructure the code a little bit to make that possible and take an offset parameter. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli2-2/+2
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
2017-11-11net: dsa: lan9303: Clear offload_fwd_mark for IGMPEgil Hjelmeland1-0/+13
Now that IGMP packets no longer is flooded in HW, we want the SW bridge to forward packets based on bridge configuration. To make that happen, IGMP packets must have skb->offload_fwd_mark = 0. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: {e}dsa: set offload_fwd_mark on received packetsAndrew Lunn2-0/+4
The software bridge needs to know if a packet has already been bridged by hardware offload to ports in the same hardware offload, in order that it does not re-flood them, causing duplicates. This is particularly true for broadcast and multicast traffic which the host has requested. By setting offload_fwd_mark in the skb the bridge will only flood to ports in other offloads and other netifs. Set this flag in the DSA and EDSA tag driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: Fix SWITCHDEV_ATTR_ID_PORT_PARENT_IDAndrew Lunn1-2/+3
SWITCHDEV_ATTR_ID_PORT_PARENT_ID is used by the software bridge when determining which ports to flood a packet out. If the packet originated from a switch, it assumes the switch has already flooded the packet out the switches ports, so the bridge should not flood the packet itself out switch ports. Ports on the same switch are expected to return the same parent ID when SWITCHDEV_ATTR_ID_PORT_PARENT_ID is called. DSA gets this wrong with clusters of switches. As far as the software bridge is concerned, the cluster is all one switch. A packet from any switch in the cluster can be assumed to have been flooded as needed out of all ports of the cluster, not just the switch it originated from. Hence all ports of a cluster should return the same parent. The old implementation did not, each switch in the cluster had its own ID. Also wrong was that the ID was not unique if multiple DSA instances are in operation. Use the tree ID as the parent ID, which is the same for all switches in a cluster and unique across switch clusters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: return after vlan prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the VLAN addition on every ports member of a it. Fix this. Fixes: 1ca4aa9cd4cc ("net: dsa: check VLAN capability of every switch") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: return after mdb prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the MDB addition on every ports member of a multicast group. Fix this. Fixes: a1a6b7ea7f2d ("net: dsa: add cross-chip multicast support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: Don't add vlans when vlan filtering is disabledAndrew Lunn1-2/+8
The software bridge can be build with vlan filtering support included. However, by default it is turned off. In its turned off state, it still passes VLANs via switchev, even though they are not to be used. Don't pass these VLANs to the hardware. Only do so when vlan filtering is enabled. This fixes at least one corner case. There are still issues in other corners, such as when vlan_filtering is later enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: switch: Don't add CPU port to an mdb by defaultAndrew Lunn1-1/+1
Now that the host indicates when a multicast group should be forwarded from the switch to the host, don't do it by default. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: add more const attributesAndrew Lunn2-5/+5
The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: slave: Handle switchdev host mdb add/delAndrew Lunn1-0/+13
Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: rename probe and remove switch functionsVivien Didelot1-4/+4
This commit brings no functional changes. It gets rid of the underscore prefixed _dsa_register_switch and _dsa_unregister_switch functions in favor of dsa_switch_probe() which parses and adds a switch to a tree and dsa_switch_remove() which removes a switch from a tree. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup a tree when adding a switch to itVivien Didelot1-19/+16
Now that the tree setup is centralized, we can simplify the code a bit more by setting up or tearing down the tree directly when adding or removing a switch to/from it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.