aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/gre_demux.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-21fou: make local function staticstephen hemminger2-49/+47
The build header functions are not used by any other code. net/ipv6/fou6.c:36:5: warning: no previous prototype for ‘fou6_build_header’ [-Wmissing-prototypes] net/ipv6/fou6.c:54:5: warning: no previous prototype for ‘gue6_build_header’ [-Wmissing-prototypes] Need to do some code rearranging to satisfy different Kconfig possiblities. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21tcpnv: do not export local functionstephen hemminger1-3/+2
The TCP New Vegas congestion control was exporting an internal function tcpnv_get_info which is not used by any other in tree kernel code. Make it static. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21inet: fix warning about missing prototypestephen hemminger1-0/+1
The prototype for inet_rcv_saddr_equal was not being included. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21ila: propagate error code in ila_outputstephen hemminger1-1/+1
This warning: net/ipv6/ila/ila_lwt.c: In function ‘ila_output’: net/ipv6/ila/ila_lwt.c:42:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] It looks like the code attempts to set propagate different error values, but always returned -EINVAL. Compile tested only. Needs review by original author. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21dcb: enforce minimum length on IEEE_APPS attributestephen hemminger1-4/+7
Found by reviewing the warning about unused policy table. The code implies that it meant to check for size, but since it unrolled the loop for attribute validation that is never used. Instead do explicit check for attribute. Compile tested only. Needs review by original author. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: ethernet: update drivers to make both SW and HW TX timestampsMiroslav Lichvar4-10/+6
Some drivers were calling the skb_tx_timestamp() function only when a hardware timestamp was not requested. Now that applications can use the SOF_TIMESTAMPING_OPT_TX_SWHW option to request both software and hardware timestamps, the drivers need to be modified to unconditionally call skb_tx_timestamp(). CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: allow simultaneous SW and HW transmit timestampingMiroslav Lichvar5-11/+34
Add SOF_TIMESTAMPING_OPT_TX_SWHW option to allow an outgoing packet to be looped to the socket's error queue with a software timestamp even when a hardware transmit timestamp is expected to be provided by the driver. Applications using this option will receive two separate messages from the error queue, one with a software timestamp and the other with a hardware timestamp. As the hardware timestamp is saved to the shared skb info, which may happen before the first message with software timestamp is received by the application, the hardware timestamp is copied to the SCM_TIMESTAMPING control message only when the skb has no software timestamp or it is an incoming packet. While changing sw_tx_timestamp(), inline it in skb_tx_timestamp() as there are no other users. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: fix documentation of struct scm_timestampingMiroslav Lichvar1-1/+7
The scm_timestamping struct may return multiple non-zero fields, e.g. when both software and hardware RX timestamping is enabled, or when the SO_TIMESTAMP(NS) option is combined with SCM_TIMESTAMPING and a false software timestamp is generated in the recvmsg() call in order to always return a SCM_TIMESTAMP(NS) message. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: add new control message for incoming HW-timestamped packetsMiroslav Lichvar4-2/+48
Add SOF_TIMESTAMPING_OPT_PKTINFO option to request a new control message for incoming packets with hardware timestamps. It contains the index of the real interface which received the packet and the length of the packet at layer 2. The index is useful with bonding, bridges and other interfaces, where IP_PKTINFO doesn't allow applications to determine which PHC made the timestamp. With the L2 length (and link speed) it is possible to transpose preamble timestamps to trailer timestamps, which are used in the NTP protocol. While this information could be provided by two new socket options independently from timestamping, it doesn't look like they would be very useful. With this option any performance impact is limited to hardware timestamping. Use dev_get_by_napi_id() to get the device and its index. On kernels with disabled CONFIG_NET_RX_BUSY_POLL or drivers not using NAPI, a zero index will be returned in the control message. CC: Richard Cochran <richardcochran@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: add function to retrieve original skb device using NAPI IDMiroslav Lichvar3-0/+36
Since commit b68581778cd0 ("net: Make skb->skb_iif always track skb->dev") skbs don't have the original index of the interface which received the packet. This information is now needed for a new control message related to hardware timestamping. Instead of adding a new field to skb, we can find the device by the NAPI ID if it is available, i.e. CONFIG_NET_RX_BUSY_POLL is enabled and the driver is using NAPI. Add dev_get_by_napi_id() and also skb_napi_id() to hide the CONFIG_NET_RX_BUSY_POLL ifdef. CC: Richard Cochran <richardcochran@gmail.com> Suggested-by: Willem de Bruijn <willemb@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: ethernet: update drivers to handle HWTSTAMP_FILTER_NTP_ALLMiroslav Lichvar18-2/+18
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: define receive timestamp filter for NTPMiroslav Lichvar2-0/+5
Add HWTSTAMP_FILTER_NTP_ALL to the hwtstamp_rx_filters enum for timestamping of NTP packets. There is currently only one driver (phyter) that could support it directly. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21cxgb4 : retrieve port information from firmwareGanesh Goudar5-3/+70
issue get port information command to firmware to retrieve port information and update if it is different from what was last recorded and also add indication for supported link modes for firmware port types FW_PORT_TYPE_SFP28, FW_PORT_TYPE_KR_SFP28, FW_PORT_TYPE_CR4_QSFP. Based on the original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21ibmveth: Support to enable LSO/CSO for Trunk VEA.Sivakumar Krishnasamy2-18/+90
Current largesend and checksum offload feature in ibmveth driver, - Source VM sends the TCP packets with ip_summed field set as CHECKSUM_PARTIAL and TCP pseudo header checksum is placed in checksum field - CHECKSUM_PARTIAL flag in SKB will enable ibmveth driver to mark "no checksum" and "checksum good" bits in transmit buffer descriptor before the packet is delivered to pseries PowerVM Hypervisor - If ibmveth has largesend capability enabled, transmit buffer descriptors are market accordingly before packet is delivered to Hypervisor (along with mss value for packets with length > MSS) - Destination VM's ibmveth driver receives the packet with "checksum good" bit set and so, SKB's ip_summed field is set with CHECKSUM_UNNECESSARY - If "largesend" bit was on, mss value is copied from receive descriptor into SKB's gso_size and other flags are appropriately set for packets > MSS size - The packet is now successfully delivered up the stack in destination VM The offloads described above works fine for TCP communication among VMs in the same pseries server ( VM A <=> PowerVM Hypervisor <=> VM B ) We are now enabling support for OVS in pseries PowerVM environment. One of our requirements is to have ibmveth driver configured in "Trunk" mode, when they are used with OVS. This is because, PowerVM Hypervisor will no more bridge the packets between VMs, instead the packets are delivered to IO Server which hosts OVS to bridge them between VMs or to external networks (flow shown below), VM A <=> PowerVM Hypervisor <=> IO Server(OVS) <=> PowerVM Hypervisor <=> VM B In "IO server" the packet is received by inbound Trunk ibmveth and then delivered to OVS, which is then bridged to outbound Trunk ibmveth (shown below), Inbound Trunk ibmveth <=> OVS <=> Outbound Trunk ibmveth In this model, we hit the following issues which impacted the VM communication performance, - Issue 1: ibmveth doesn't support largesend and checksum offload features when configured as "Trunk". Driver has explicit checks to prevent enabling these offloads. - Issue 2: SYN packet drops seen at destination VM. When the packet originates, it has CHECKSUM_PARTIAL flag set and as it gets delivered to IO server's inbound Trunk ibmveth, on validating "checksum good" bits in ibmveth receive routine, SKB's ip_summed field is set with CHECKSUM_UNNECESSARY flag. This packet is then bridged by OVS (or Linux Bridge) and delivered to outbound Trunk ibmveth. At this point the outbound ibmveth transmit routine will not set "no checksum" and "checksum good" bits in transmit buffer descriptor, as it does so only when the ip_summed field is CHECKSUM_PARTIAL. When this packet gets delivered to destination VM, TCP layer receives the packet with checksum value of 0 and with no checksum related flags in ip_summed field. This leads to packet drops. So, TCP connections never goes through fine. - Issue 3: First packet of a TCP connection will be dropped, if there is no OVS flow cached in datapath. OVS while trying to identify the flow, computes the checksum. The computed checksum will be invalid at the receiving end, as ibmveth transmit routine zeroes out the pseudo checksum value in the packet. This leads to packet drop. - Issue 4: ibmveth driver doesn't have support for SKB's with frag_list. When Physical NIC has GRO enabled and when OVS bridges these packets, OVS vport send code will end up calling dev_queue_xmit, which in turn calls validate_xmit_skb. In validate_xmit_skb routine, the larger packets will get segmented into MSS sized segments, if SKB has a frag_list and if the driver to which they are delivered to doesn't support NETIF_F_FRAGLIST feature. This patch addresses the above four issues, thereby enabling end to end largesend and checksum offload support for better performance. - Fix for Issue 1 : Remove checks which prevent enabling TCP largesend and checksum offloads. - Fix for Issue 2 : When ibmveth receives a packet with "checksum good" bit set and if its configured in Trunk mode, set appropriate SKB fields using skb_partial_csum_set (ip_summed field is set with CHECKSUM_PARTIAL) - Fix for Issue 3: Recompute the pseudo header checksum before sending the SKB up the stack. - Fix for Issue 4: Linearize the SKBs with frag_list. Though we end up allocating buffers and copying data, this fix gives upto 4X throughput increase. Note: All these fixes need to be dropped together as fixing just one of them will lead to other issues immediately (especially for Issues 1,2 & 3). Signed-off-by: Sivakumar Krishnasamy <ksiva@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Support 1G advertisment.Sudarsana Reddy Kalluru1-0/+8
Some variants of adapters support the 1G speed capability. Need to allow the configuration of 1G speed if adapter supports it. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Fix setting of Management bitfieldsTomer Tayar1-1/+1
The management firmware HSI contains masks which are already shifted to their right place, so QED_MFW_SET_FIELD() is clearing incorrect fields by shifting the mask by the offset. Luckily, today we set the fields in an incrementing order [so we're not erasing any previously set fields], but this still needs fixing. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: qedr closure after setting stateMintz, Yuval1-1/+2
This is benign, but it makes more sense to start the close sequence only after changing the internal state [in case it would once care]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Correct print in iscsi error-flowMintz, Yuval1-1/+1
If too many CQs are requested, qed would print the available number as if it's a resource and not a feature leading to the wrong print. Fixes: 08737a3fa30a ("qed: Inform qedi the number of possible CQs") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Revise alloc/setup/free flowTomer Tayar15-177/+177
Re-organize the logic that allocates and frees memory of various sub-components of the hw-function - a. No need to pass pointers to said structure as parameters; The internal logic knows exactly where to find/set the data. b. Nullify pointers after cleanup to prevent possible errors to re-entrant code. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Don't use an internal MAC fieldMintz, Yuval3-28/+38
Driver maintains its primary MAC in a private field which gets updated when ndo_dev_set_mac() gets called. However, there are flows where the primary MAC of the device can change without said NDO being called [bond device in TLB mode configuring slaves' addresses], resulting in a configuration where there's a mismatch between what's apparent to user [the netdevice's value] and what's configured in the HW [the private value]. As we don't have any real motivation of maintaining this private field, simply remove it and start using the netdevice's field instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Add missing Status-block freeSudarsana Reddy Kalluru1-4/+7
When destroying the datapath channels, qede doesn't notify qed of the released status blocks which were acquired during the initialization. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Honor user request for Tx buffersSudarsana Reddy Kalluru3-15/+15
Driver always allocates the maximal number of tx-buffers irrespective of actual Tx ring config. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Allow WoL to activate by defaultMintz, Yuval1-0/+6
When management firmware declares that the device is WoL-capable, the default driver behavior would be to allow the management firmware to take the decision of whether it's actually needed or not. Problem is ethtool interface doesn't have a 'default' kind of option, and user would see the interface WoL as disabled, which doesn't accurately reflect the actual configuration. More-so, if the user actually wants to explicitly disable WoL he'd have to first enable it [otherwise ethtool would block the command]. Instead of allowing management to make the decision, enable WoL by default on all devices capable of it. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19xgene: Check all RGMII phy mode variantsIyappan Subramanian3-15/+18
This patch addresses the review comment from the previous patch set, by using phy_interface_mode_is_rgmii() helper function to address all RGMII phy mode variants. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19phy: Add helper function to check phy interface modeIyappan Subramanian1-2/+12
Added helper function that checks phy_mode is RGMII (all variants) 'bool phy_interface_mode_is_rgmii(phy_interface_t mode)' Changed the following function, to use the above. 'bool phy_interface_is_rgmii(struct phy_device *phydev)' Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19sk_buff.h: improve description of CHECKSUM_{COMPLETE, UNNECESSARY}Davide Caratti1-2/+5
Add FCoE to the list of protocols that can set CHECKSUM_UNNECESSARY; add a note to CHECKSUM_COMPLETE section to specify that it does not apply to SCTP and FCoE protocols. Suggested-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19openvswitch: more accurate checksumming in queue_userspace_packet()Davide Caratti1-1/+1
if skb carries an SCTP packet and ip_summed is CHECKSUM_PARTIAL, it needs CRC32c in place of Internet Checksum: use skb_csum_hwoffload_help to avoid corrupting such packets while queueing them towards userspace. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19net: more accurate checksumming in validate_xmit_skb()Davide Caratti4-14/+27
skb_csum_hwoffload_help() uses netdev features and skb->csum_not_inet to determine if skb needs software computation of Internet Checksum or crc32c (or nothing, if this computation can be done by the hardware). Use it in place of skb_checksum_help() in validate_xmit_skb() to avoid corruption of non-GSO SCTP packets having skb->ip_summed equal to CHECKSUM_PARTIAL. While at it, remove references to skb_csum_off_chk* functions, since they are not present anymore in Linux _ see commit cf53b1da73bd ("Revert "net: Add driver helper functions to determine checksum offloadability""). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19net: use skb->csum_not_inet to identify packets needing crc32cDavide Caratti5-7/+13
skb->csum_not_inet carries the indication on which algorithm is needed to compute checksum on skb in the transmit path, when skb->ip_summed is equal to CHECKSUM_PARTIAL. If skb carries a SCTP packet and crc32c hasn't been yet written in L4 header, skb->csum_not_inet is assigned to 1; otherwise, assume Internet Checksum is needed and thus set skb->csum_not_inet to 0. Suggested-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19sk_buff: remove support for csum_bad in sk_buffDavide Caratti7-36/+6
This bit was introduced with commit 5a21232983aa ("net: Support for csum_bad in skbuff") to reduce the stack workload when processing RX packets carrying a wrong Internet Checksum. Up to now, only one driver and GRO core are setting it. Suggested-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19net: introduce skb_crc32c_csum_helpDavide Caratti3-1/+44
skb_crc32c_csum_help is like skb_checksum_help, but it is designed for checksumming SCTP packets using crc32c (see RFC3309), provided that libcrc32c.ko has been loaded before. In case libcrc32c is not loaded, invoking skb_crc32c_csum_help on a skb results in one the following printouts: warn_crc32c_csum_update: attempt to compute crc32c without libcrc32c.ko warn_crc32c_csum_combine: attempt to compute crc32c without libcrc32c.ko Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19skbuff: add stub to help computing crc32c on SCTP packetsDavide Caratti3-0/+34
sctp_compute_checksum requires crc32c symbol (provided by libcrc32c), so it can't be used in net core. Like it has been done previously with other symbols (e.g. ipv6_dst_lookup), introduce a stub struct skb_checksum_ops to allow computation of crc32c checksum in net core after sctp.ko (and thus libcrc32c) has been loaded. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19tcp: warn on negative reordering valuesSoheil Hassas Yeganeh1-0/+3
Commit bafbb9c73241 ("tcp: eliminate negative reordering in tcp_clean_rtx_queue") fixes an issue for negative reordering metrics. To be resilient to such errors, warn and return when a negative metric is passed to tcp_update_reordering(). Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net/mlx5e: Fix possible memory leakWei Yongjun1-4/+4
'encap_header' is malloced and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18qed: Remove unused including <linux/version.h>Wei Yongjun5-5/+0
Remove including <linux/version.h> that is not needed. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18ibmvnic: fix missing unlock on error in __ibmvnic_reset()Wei Yongjun1-0/+1
Add the missing unlock before return from function __ibmvnic_reset() in the error handling case. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net1080: Remove unused function nc_dump_ttl()Matthias Kaehlcke1-9/+0
The function is not used, removing it fixes the following warning when building with clang: drivers/net/usb/net1080.c:271:20: error: unused function 'nc_dump_ttl' [-Werror,-Wunused-function] Also remove the definition of TTL_THIS, which is only used in nc_dump_ttl() Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18r8152: Remove unused function usb_ocp_read()Matthias Kaehlcke1-6/+0
The function is not used, removing it fixes the following warning when building with clang: drivers/net/usb/r8152.c:825:5: error: unused function 'usb_ocp_read' [-Werror,-Wunused-function] Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18qed: Utilize FW 8.20.0.0Mintz, Yuval20-2961/+4734
This pushes qed [and as result, all qed* drivers] into using 8.20.0.0 firmware. The changes are mostly contained in qed with minor changes to qedi due to some HSI changes. Content-wise, the firmware contains fixes to various issues exposed since the release of the previous firmware, including: - Corrects iSCSI fast retransmit when data digest is enabled. - Stop draining packets when receiving several consecutive PFCs. - Prevent possible assertion when consecutively opening/closing many connections. - Prevent possible assertion due to too long BDQ fetch time. In addition, the new firmware would allow us to later add iWARP support in qed and qedr. Changes from previous version ----------------------------- - V2: Fix warning in qed_debug.c Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18tcp: fix tcp_rearm_rto()Eric Dumazet1-6/+6
skbs in (re)transmit queue no longer have a copy of jiffies at the time of the transmit : skb->skb_mstamp is now in usec unit, with no correlation to tcp_jiffies32. We have to convert rto from jiffies to usec, compute a time difference in usec, then convert the delta to HZ units. Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18mlxsw: spectrum: Avoid possible NULL pointer dereferenceIdo Schimmel1-4/+2
In case we got an FDB notification for a port that doesn't exist we execute an FDB entry delete to prevent it from re-appearing the next time we poll for notifications. If the operation failed we would trigger a NULL pointer dereference as 'mlxsw_sp_port' is NULL. Fix it by reporting the error using the underlying bus device instead. Fixes: 12f1501e7511 ("mlxsw: spectrum: remove FDB entry in case we get unknown object notification") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18liquidio: make the spinlock octeon_devices_lock staticColin Ian King1-1/+1
octeon_devices_lock can be made static as it does not need to be in global scope. Cleans up sparse warning: "warning: symbol 'octeon_devices_lock' was not declared. Should it be static?" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18sh_eth: Do not print an error message for probe deferralGeert Uytterhoeven1-1/+2
EPROBE_DEFER is not an error, hence printing an error message like sh-eth ee700000.ethernet: failed to initialise MDIO may confuse the user. To fix this, suppress the error message in case of probe deferral. While at it, shorten the message, and add the actual error code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18sh_eth: Use platform device for printing before register_netdev()Geert Uytterhoeven1-1/+1
The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18mlxsw: spectrum_dpipe: Fix sparse warningsArkadi Sharshevsky1-1/+4
drivers/net/ethernet/mellanox/mlxsw//spectrum_dpipe.c:221:52: warning: Using plain integer as NULL pointer drivers/net/ethernet/mellanox/mlxsw//spectrum_dpipe.c:221:74: warning: Using plain integer as NULL pointer Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18mlxsw: spectrum_router: Fix rif counter freeing routineArkadi Sharshevsky1-0/+3
During rif counter freeing the counter index can be invalid. Add check of validity before freeing the counter. Fixes: e0c0afd8aa4e ("mlxsw: spectrum: Support for counters on router interfaces") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18mlxsw: spectrum_dpipe: Fix incorrect entry indexArkadi Sharshevsky1-1/+2
In case of disabled counters the entry index will be incorrect. Fix this by moving the entry index set before the counter status check. Fixes: 2ba5999f009d ("mlxsw: spectrum: Add Support for erif table entries access") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.Eric Anholt2-0/+5
Cygnus is a small family of SoCs, of which we currently have devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the same as 58xx, just requiring a tiny bit of setup that was previously missing. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: use switchdev_obj_dump_cb_t everywhereVivien Didelot7-16/+16
Now that the DSA public header includes switchdev.h, use the provided switchdev_obj_dump_cb_t typedef for the object dump callback. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include switchdev.h only onceVivien Didelot8-13/+1
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.