aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/icmp.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-07-14mib: add struct net to ICMPMSGIN_INC_STATS_BHPavel Emelyanov1-1/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMPMSGOUT_INC_STATSPavel Emelyanov1-1/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMP_INC_STATS_BHPavel Emelyanov1-5/+5
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mib: add struct net to ICMP_INC_STATSPavel Emelyanov1-1/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14inet: toss struct net initialization aroundPavel Emelyanov1-3/+1
Some places, that deal with ICMP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. Since I will need this net soon, I declare a struct net on the stack and use it in the existing places in a separate patch not to spoil the future ones. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14icmp: add struct net argument to icmp_out_countPavel Emelyanov1-1/+1
This routine deals with ICMP statistics, but doesn't have a struct net at hands, so add one. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11net: remove CVS keywordsAdrian Bunk1-2/+0
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29ipv4: Update MTU to all related cache entries in ip_rt_frag_needed()Timo Teras1-1/+2
Add struct net_device parameter to ip_rt_frag_needed() and update MTU to cache entries where ifindex is specified. This is similar to what is already done in ip_rt_redirect(). Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-21[IPV4]: Convert do_gettimeofday() to getnstimeofday().YOSHIFUJI Hideaki1-4/+4
What do_gettimeofday() does is to call getnstimeofday() and to convert the result from timespec{} to timeval{}. After that, these callers convert the result again to msec. Use getnstimeofday() and convert the units at once. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-21[IPV4]: Make icmp_sk_init() static.Adrian Bunk1-1/+1
This patch makes the needlessly global icmp_sk_init() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14[IPV4]: Use NIPQUAD_FMT to format ipv4 addresses.YOSHIFUJI Hideaki1-6/+6
And use %u to format port. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-11/+13
Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-03[ICMP]: Simplify ICMP control socket creation.Denis V. Lunev1-18/+7
Replace sock_create_kern with inet_ctl_sock_create. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03[ICMP]: Ensure that ICMP relookup maintains status quoHerbert Xu1-11/+13
The ICMP relookup path is only meant to modify behaviour when appropriate IPsec policies are in place and marked as requiring relookups. It is certainly not meant to modify behaviour when IPsec policies don't exist at all. However, due to an oversight on the error paths existing behaviour may in fact change should one of the relookup steps fail. This patch corrects this by redirecting all errors on relookup failures to the previous code path. That is, if the initial xfrm_lookup let the packet pass, we will stand by that decision should the relookup fail due to an error. This should be safe from a security point-of-view because compliant systems must install a default deny policy so the packet would'nt have passed in that case. Many thanks to Julian Anastasov for pointing out this error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-27Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-3/+3
Conflicts: drivers/net/usb/rndis_host.c drivers/net/wireless/b43/dma.c net/ipv6/ndisc.c
2008-03-26[ICMP]: Dst entry leak in icmp_send host re-lookup code (v2).Pavel Emelyanov1-3/+3
Commit 8b7817f3a959ed99d7443afc12f78a7e1fcc2063 ([IPSEC]: Add ICMP host relookup support) introduced some dst leaks on error paths: the rt pointer can be forgotten to be put. Fix it bu going to a proper label. Found after net namespace's lo refused to unregister :) Many thanks to Den for valuable help during debugging. Herbert pointed out, that xfrm_lookup() will put the rtable in case of error itself, so the first goto fix is redundant. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NETNS][ICMP]: Build fix for NET_NS=n case (dev->nd_net is omitted).Pavel Emelyanov1-2/+2
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NETNS][ICMP]: Use per-net sysctls in ipv4/icmp.c.Pavel Emelyanov1-9/+16
This mostly re-uses the net, used in icmp netnsization patches from Denis. After this ICMP sysctls are completely virtualized. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NETNS][ICMP]: Move ICMP sysctls on struct net.Pavel Emelyanov1-29/+31
Initialization is moved to icmp_sk_init, all the places, that refer to them use init_net for now. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki1-4/+4
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-05[IPV4]: Add 'rtable' field in struct sk_buff to alias 'dst' and avoid castsEric Dumazet1-5/+5
(Anonymous) unions can help us to avoid ugly casts. A common cast it the (struct rtable *)skb->dst one. Defining an union like : union { struct dst_entry *dst; struct rtable *rtable; }; permits to use skb->rtable in place. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Section conflict between icmp_sk_init/icmp_sk_exit.Denis V. Lunev1-1/+3
Functions from __exit section should not be called from ones in __init section. Fix this conflict. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Make icmp_sk per namespace.Denis V. Lunev1-17/+32
All preparations are done. Now just add a hook to perform an initialization on namespace startup and replace icmp_sk macro with proper inline call. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: icmp(v6)_sk should not pin a namespace.Denis V. Lunev1-8/+4
So, change icmp(v6)_sk creation/disposal to the scheme used in the netlink for rtnl, i.e. create a socket in the context of the init_net and assign the namespace without getting a referrence later. Also use sk_release_kernel instead of sock_release to properly destroy such sockets. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Allocate data for __icmp(v6)_sk dynamically.Denis V. Lunev1-5/+10
Own __icmp(v6)_sk should be present in each namespace. So, it should be allocated dynamically. Though, alloc_percpu does not fit the case as it implies additional dereferrence for no bonus. Allocate data for pointers just like __percpu_alloc_mask does and place pointers to struct sock into this array. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Pass proper ICMP socket into icmp(v6)_xmit_(un)lock.Denis V. Lunev1-9/+10
We have to get socket lock inside icmp(v6)_xmit_lock/unlock. The socket is get from global variable now. When this code became namespaces, one should pass a namespace and get socket from it. Though, above is useless. Socket is available in the caller, just pass it inside. This saves a bit of code now and saves more later. add/remove: 0/0 grow/shrink: 1/3 up/down: 1/-169 (-168) function old new delta icmp_rcv 718 719 +1 icmpv6_rcv 2343 2303 -40 icmp_send 1566 1518 -48 icmp_reply 549 468 -81 Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Store sock rather than socket for ICMP flow control.Denis V. Lunev1-14/+13
Basically, there is no difference, what to store: socket or sock. Though, sock looks better as there will be 1 less dereferrence on the fast path. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Optimize icmp_socket usage.Denis V. Lunev1-12/+17
Use this macro only once in a function to save a bit of space. add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-98 (-98) function old new delta icmp_reply 562 561 -1 icmp_push_reply 305 258 -47 icmp_init 273 223 -50 Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Add return code to icmp_init.Denis V. Lunev1-4/+22
icmp_init could fail and this is normal for namespace other than initial. So, the panic should be triggered only on init_net initialization path. Additionally create rollback path for icmp_init as a separate function. It will also be used later during namespace destruction. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[INET]: Remove struct net_proto_family* from _init calls.Denis V. Lunev1-1/+1
struct net_proto_family* is not used in icmp[v6]_init, ndisc_init, igmp_init and tcp_v4_init. Remove it. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05[ICMP]: Restore pskb_pull calls in receive functionHerbert Xu1-1/+2
Somewhere along the development of my ICMP relookup patch the header length check went AWOL on the non-IPsec path. This patch restores the check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace for ICMP replying code.Denis V. Lunev1-8/+13
All needed API is done, the namespace is available when required from the device on the DST entry from the incoming packet. So, just replace init_net with proper namespace. Other protocols will follow. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Routing cache virtualization.Denis V. Lunev1-1/+1
Basically, this piece looks relatively easy. Namespace is already available on the dst entry via device and the device is safe to dereferrence. Compare it with one of a searcher and skip entry if appropriate. The only exception is ip_rt_frag_needed. So, add namespace parameter to it. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace parameter to ip_route_output_key.Denis V. Lunev1-2/+2
Needed to propagate it down to the ip_route_output_flow. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace parameter to __ip_route_output_key.Denis V. Lunev1-2/+2
This is only required to propagate it down to the ip_route_output_slow. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[DST]: shrinks sizeof(struct rtable) by 64 bytes on x86_64Eric Dumazet1-6/+7
On x86_64, sizeof(struct rtable) is 0x148, which is rounded up to 0x180 bytes by SLAB allocator. We can reduce this to exactly 0x140 bytes, without alignment overhead, and store 12 struct rtable per PAGE instead of 10. rate_tokens is currently defined as an "unsigned long", while its content should not exceed 6*HZ. It can safely be converted to an unsigned int. Moving tclassid right after rate_tokens to fill the 4 bytes hole permits to save 8 bytes on 'struct dst_entry', which finally permits to save 8 bytes on 'struct rtable' Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inet_(dev_)add_type.Eric W. Biederman1-2/+2
The patch extends the inet_addr_type and inet_dev_addr_type with the network namespace pointer. That allows to access the different tables relatively to the network namespace. The modification of the signature function is reported in all the callers of the inet_addr_type using the pointer to the well known init_net. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ICMP]: Avoid sparse warnings in net/ipv4/icmp.cEric Dumazet1-2/+2
CHECK net/ipv4/icmp.c net/ipv4/icmp.c:249:13: warning: context imbalance in 'icmp_xmit_unlock' - unexpected unlock net/ipv4/icmp.c:376:13: warning: context imbalance in 'icmp_reply' - different lock contexts for basic block net/ipv4/icmp.c:430:6: warning: context imbalance in 'icmp_send' - different lock contexts for basic block Solution is to declare both icmp_xmit_lock() and icmp_xmit_unlock() as inline Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Do not let packets pass when ICMP flag is offHerbert Xu1-2/+5
This fixes a logical error in ICMP policy checks which lets packets through if the state ICMP flag is off. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Fix reversed ICMP6 policy checkHerbert Xu1-1/+1
The policy check I added for ICMP on IPv6 is reversed. This patch fixes that. It also adds an skb->sp check so that unprotected packets that fail the policy check do not crash the machine. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Add ICMP host relookup supportHerbert Xu1-3/+79
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch implements this for ICMP traffic that originates from or terminates on localhost. This is activated on outbound with the new policy flag XFRM_POLICY_ICMP, and on inbound by the new state flag XFRM_STATE_ICMP. On inbound the policy check is now performed by the ICMP protocol so that it can repeat the policy check where necessary. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPv4] RAW: Compact the API for the kernelPavel Emelyanov1-14/+1
The raw sockets functions are explicitly used from inside the kernel in two places: 1. in ip_local_deliver_finish to intercept skb-s 2. in icmp_error For this purposes many functions and even data structures, that are naturally internal for raw protocol, are exported. Compact the API to two functions and hide all the other (including hash table and rwlock) inside the net/ipv4/raw.c Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21[ICMP]: ICMP_MIB_OUTMSGS increment duplicatedWang Chen1-1/+0
Commit "96793b482540f3a26e2188eaf75cb56b7829d3e3" (Add ICMPMsgStats MIB (RFC 4293)) made a mistake. In that patch, David L added a icmp_out_count() in ip_push_pending_frames(), remove icmp_out_count() from icmp_reply(). But he forgot to remove icmp_out_count() from icmp_send() too. Since icmp_send and icmp_reply will call icmp_push_reply, which will call ip_push_pending_frames, a duplicated increment happened in icmp_send. This patch remove the icmp_out_count from icmp_send too. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-26[INET]: Unexport icmpmsg_statisticsAdrian Bunk1-1/+0
This patch removes the unused EXPORT_SYMBOL(icmpmsg_statistics). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPV4]: Add ICMPMsgStats MIB (RFC 4293)David L Stevens1-47/+6
Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman1-1/+1
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03[ICMP]: Fix icmp_errors_use_inbound_ifaddr sysctlPatrick McHardy1-6/+9
Currently when icmp_errors_use_inbound_ifaddr is set and an ICMP error is sent after the packet passed through ip_output(), an address from the outgoing interface is chosen as ICMP source address since skb->dev doesn't point to the incoming interface anymore. Fix this by doing an interface lookup on rt->dst.iif and using that device. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[IPV4]: icmp: fix crash with sysctl_icmp_errors_use_inbound_ifaddrPatrick McHardy1-1/+4
When icmp_send is called on the local output path before the packet hits ip_output, skb->dev is not set, causing a crash when sysctl_icmp_errors_use_inbound_ifaddr is set. This can happen with the netfilter REJECT target or IPsec tunnels. Let routing decide the ICMP source address in that case, since the packet is locally generated there is no inbound interface and the sysctl should not apply. The option actually seems to be unfixable broken, on the path after ip_output() skb->dev points to the outgoing device and we don't know the incoming device anymore, so its going to do the absolute wrong thing and pick the address of the outgoing interface. Add a comment about this. Reported by Curtis Doty <Curtis@GreenKey.net>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo1-1/+2
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce icmp_hdr(), remove skb->h.icmphArnaldo Carvalho de Melo1-7/+7
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>