aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/ip_gre.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-18gre: clear IFF_TX_SKB_SHARINGJiri Benc1-2/+3
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by gre as it modifies the skb on xmit. Also, clean up whitespace in ipgre_tap_setup when we're already touching it. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-10vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devicesDavid Wragg1-0/+8
Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: David Wragg <david@weave.works> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-25ip_tunnel: Move stats update to iptunnel_xmit()Pravin B Shelar1-4/+3
By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30net: remove unnecessary mroute.h includesNikolay Aleksandrov1-1/+0
It looks like many files are including mroute.h unnecessarily, so remove the include. Most importantly remove it from ipv6. CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22openvswitch: Fix egress tunnel info.Pravin B Shelar1-9/+37
While transitioning to netdev based vport we broke OVS feature which allows user to retrieve tunnel packet egress information for lwtunnel devices. Following patch fixes it by introducing ndo operation to get the tunnel egress info. Same ndo operation can be used for lwtunnel devices and compat ovs-tnl-vport devices. So after adding such device operation we can remove similar operation from ovs-vport. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc1-1/+2
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc1-1/+1
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27tunnel: introduce udp_tun_rx_dst()Pravin B Shelar1-16/+5
Introduce function udp_tun_rx_dst() to initialize tunnel dst on receive path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20route: move lwtunnel state to dst_entryJiri Benc1-1/+1
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: use tos and ttl fields also for IPv6Jiri Benc1-4/+4
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: add IPv6 addresses to ip_tunnel_keyJiri Benc1-5/+5
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10gre: Remove support for sharing GRE protocol hook.Pravin B Shelar1-16/+199
Support for sharing GREPROTO_CISCO port was added so that OVS gre port and kernel GRE devices can co-exist. After flow-based tunneling patches OVS GRE protocol processing is completely moved to ip_gre module. so there is no need for GRE protocol hook. Following patch consolidates GRE protocol related functions into ip_gre module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10openvswitch: Use regular GRE net_device instead of vportPravin B Shelar1-0/+36
Using GRE tunnel meta data collection feature, we can implement OVS GRE vport. This patch removes all of the OVS specific GRE code and make OVS use a ip_gre net_device. Minimal GRE vport is kept to handle compatibility with current userspace application. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10ip_gre: Add support to collect tunnel metadata.Pravin B Shelar1-16/+179
Following patch create new tunnel flag which enable tunnel metadata collection on given device. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03ipv4: coding style: comparison for equality with NULLIan Morris1-2/+2
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ipip,gre,vti,sit: implement ndo_get_iflinkNicolas Dichtel1-0/+2
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc1-2/+2
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc1-2/+2
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08gre/ipip: use be16 variants of netlink functionsSabrina Dubroca1-6/+6
encap.sport and encap.dport are __be16, use nla_{get,put}_be16 instead of nla_{get,put}_u16. Fixes the sparse warnings: warning: incorrect type in assignment (different base types) expected restricted __be32 [addressable] [usertype] o_key got restricted __be16 [addressable] [usertype] i_flags warning: incorrect type in assignment (different base types) expected restricted __be16 [usertype] sport got unsigned short warning: incorrect type in assignment (different base types) expected restricted __be16 [usertype] dport got unsigned short warning: incorrect type in argument 3 (different base types) expected unsigned short [unsigned] [usertype] value got restricted __be16 [usertype] sport warning: incorrect type in argument 3 (different base types) expected unsigned short [unsigned] [usertype] value got restricted __be16 [usertype] dport Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19tunnels: advertise link netns via netlinkNicolas Dichtel1-0/+2
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31gre: allow live address changestephen hemminger1-0/+1
The GRE tap device supports Ethernet over GRE, but doesn't care about the source address of the tunnel, therefore it can be changed without bring device down. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15gre: fix the inner mac header in nbma tunnel xmit pathTimo Teräs1-4/+5
The NBMA GRE tunnels temporarily push GRE header that contain the per-packet NBMA destination on the skb via header ops early in xmit path. It is the later pulled before the real GRE header is constructed. The inner mac was thus set differently in nbma case: the GRE header has been pushed by neighbor layer, and mac header points to beginning of the temporary gre header (set by dev_queue_xmit). Now that the offloads expect mac header to point to the gre payload, fix the xmit patch to: - pull first the temporary gre header away - and reset mac header to point to gre payload This fixes tso to work again with nbma tunnels. Fixes: 14051f0452a2 ("gre: Use inner mac length when computing tunnel length") Signed-off-by: Timo Teräs <timo.teras@iki.fi> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05fou: Fix typo in returning flags in netlinkTom Herbert1-1/+1
When filling netlink info, dport is being returned as flags. Fix instances to return correct value. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet1-1/+1
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01gre: Set inner protocol in v4 and v6 GRE transmitTom Herbert1-0/+2
Call skb_set_inner_protocol to set inner Ethernet protocol to protocol being encapsulation by GRE before tunnel_xmit. This is needed for GSO if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19gre: Setup and TX path for gre/UDP foo-over-udp encapsulationTom Herbert1-5/+85
Added netlink attrs to configure FOU encapsulation for GRE, netlink handling of these flags, and properly adjust MTU for encapsulation. ip_tunnel_encap is called from ip_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-10gre: allow changing mac address when device is upstephen hemminger1-0/+1
There is no need to require forcing device down on a Ethernet GRE (gretap) tunnel to change the MAC address. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23gre: add x-netns supportNicolas Dichtel1-3/+3
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12gre: don't allow to add the same tunnel twiceNicolas Dichtel1-1/+1
Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c54419321455 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27net: gre: use icmp_hdr() to get inner ip headerDuan Jiong1-1/+1
When dealing with icmp messages, the skb->data points the ip header that triggered the sending of the icmp message. In gre_cisco_err(), the parse_gre_header() is called, and the iptunnel_pull_header() is called to pull the skb at the end of the parse_gre_header(), so the skb->data doesn't point the inner ip header. Unfortunately, the ipgre_err still needs those ip addresses in inner ip header to look up tunnel by ip_tunnel_lookup(). So just use icmp_hdr() to get inner ip header instead of skb->data. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18ipv4: be friend with drop monitorEric Dumazet1-2/+2
Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18ip_gre: fix msg_name parsing for recvfrom/recvmsgTimo Teräs1-0/+1
ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c54419321455 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2013-08-15ipip: add x-netns supportNicolas Dichtel1-2/+2
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09ip_gre: fix ipgre_header to return correct offsetTimo Teräs1-1/+1
Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01gre: fix a regression in ioctlCong Wang1-4/+5
When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c54419321455631079c7d ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: export gre_handle_offloads() function.Pravin B Shelar1-32/+2
This is required for OVS GRE offloading. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: export gre_build_header() function.Pravin B Shelar1-39/+1
This is required for ovs gre module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: Allow multiple protocol listener for gre protocol.Pravin B Shelar1-147/+26
Currently there is only one user is allowed to register for gre protocol. Following patch adds de-multiplexer. So that multiple modules can listen on gre protocol e.g. kernel gre devices and ovs. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31iptunnel: specify protocol outside IP headerNicolas Dichtel1-1/+1
Before this patch, ip_tunnel_xmit() was using the field protocol from the IP header passed into argument. There is no functional change, this patch prepares the support of IPv4 over IPv4 for module sit. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20ip_gre: fix a possible crash in ipgre_err()Eric Dumazet1-1/+2
Another fix needed in ipgre_err(), as parse_gre_header() might change skb->head. Bug added in commit c54419321455 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25net: ipv4: typo issue, remove erroneous semicolonChen Gang1-1/+1
Need remove erroneous semicolon, which is found by EXTRA_CFLAGS=-W, the related commit number: c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code") Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08ip_gre: fix a possible crash in parse_gre_header()Eric Dumazet1-3/+5
pskb_may_pull() can change skb->head, so we must init iph/greh after calling it. Bug added in commit c54419321455 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-30ip_gre: don't overwrite iflink during net_dev initAntonio Quartulli1-1/+0
iflink is currently set to 0 in __gre_tunnel_init(). This function is invoked in gre_tap_init() and ipgre_tunnel_init() which are both used to initialise the ndo_init field of the respective net_device_ops structs (ipgre.. and gre_tap..) used by GRE interfaces. However, in netdevice_register() iflink is first set to -1, then ndo_init is invoked and then iflink is assigned to a proper value if and only if it still was -1. Assigning 0 to iflink in ndo_init is therefore first preventing netdev_register() to correctly assign it a proper value and then breaking iflink at all since 0 has not correct meaning. Fix this by removing the iflink assignment in __gre_tunnel_init(). Introduced by c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26GRE: Refactor GRE tunneling code.Pravin B Shelar1-1187/+317
Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+1
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-16Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally"Timo Teräs1-4/+1
This reverts commit 412ed94744d16806fbec3bd250fd94e71cde5a1f. The commit is wrong as tiph points to the outer IPv4 header which is installed at ipgre_header() and not the inner one which is protocol dependant. This commit broke succesfully opennhrp which use PF_PACKET socket with ETH_P_NHRP protocol. Additionally ssl_addr is set to the link-layer IPv4 address. This address is written by ipgre_header() to the skb earlier, and this is the IPv4 header tiph should point to - regardless of the inner protocol payload. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10tunnel: use iptunnel_xmit() againCong Wang1-15/+1
With recent patches from Pravin, most tunnels can't use iptunnel_xmit() any more, due to ip_select_ident() and skb->ip_summed. But we can just move these operations out of iptunnel_xmit(), so that tunnels can use it again. This by the way fixes a bug in vxlan (missing nf_reset()) for net-next. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Revert "ip_gre: propogate target device GSO capability to the tunnel device"Pravin B Shelar1-8/+2
This reverts commit eb6b9a8cad65e820b145547844b108117cece3a0. Above commit limits GSO capability of gre device to just TSO, but software GRE-GSO is capable of handling all GSO capabilities. This patch also fixes following panic which reverted commit introduced:- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a2 IP: [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] PGD 42bc19067 PUD 42bca9067 PMD 0 Oops: 0000 [#1] SMP Pid: 2636, comm: ip Tainted: GF 3.8.0+ #83 Dell Inc. PowerEdge R620/0KCKR5 RIP: 0010:[<ffffffffa0680fd1>] [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] RSP: 0018:ffff88042bfcb708 EFLAGS: 00010246 RAX: 00000000000005b6 RBX: ffff88042d2fa000 RCX: 0000000000000044 RDX: 0000000000000018 RSI: 0000000000000078 RDI: 0000000000000060 RBP: ffff88042bfcb748 R08: 0000000000000018 R09: 000000000000000c R10: 0000000000000020 R11: 000000000101010a R12: ffff88042d2fa800 R13: 0000000000000000 R14: ffff88042d2fa800 R15: ffff88042cd7f650 FS: 00007fa784f55700(0000) GS:ffff88043fd20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a2 CR3: 000000042d8b9000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 2636, threadinfo ffff88042bfca000, task ffff88042d142a80) Stack: 0000000100000000 002f000000000000 0a01010100000000 000000000b010101 ffff88042d2fa800 ffff88042d2fa000 ffff88042bfcb858 ffff88042f418c00 ffff88042bfcb798 ffffffffa068199a ffff88042bfcb798 ffff88042d2fa830 Call Trace: [<ffffffffa068199a>] ipgre_newlink+0xca/0x160 [ip_gre] [<ffffffff8143b692>] rtnl_newlink+0x532/0x5f0 [<ffffffff8143b2fc>] ? rtnl_newlink+0x19c/0x5f0 [<ffffffff81438978>] rtnetlink_rcv_msg+0x2c8/0x340 [<ffffffff814386b0>] ? rtnetlink_rcv+0x40/0x40 [<ffffffff814560f9>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81438695>] rtnetlink_rcv+0x25/0x40 [<ffffffff81455ddc>] netlink_unicast+0x1ac/0x230 [<ffffffff81456a45>] netlink_sendmsg+0x265/0x380 [<ffffffff814138c0>] sock_sendmsg+0xb0/0xe0 [<ffffffff8141141e>] ? move_addr_to_kernel+0x4e/0x90 [<ffffffff81420445>] ? verify_iovec+0x85/0xf0 [<ffffffff81414ffd>] __sys_sendmsg+0x3fd/0x420 [<ffffffff8114b701>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff8114f39f>] ? vma_link+0xcf/0xe0 [<ffffffff81415239>] sys_sendmsg+0x49/0x90 [<ffffffff814ffd19>] system_call_fastpath+0x16/0x1b CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25IP_GRE: Fix GRE_CSUM case.Pravin B Shelar1-4/+8
commit "ip_gre: allow CSUM capable devices to handle packets" aa0e51cdda005cd37e2, broke GRE_CSUM case. GRE_CSUM needs checksum computed for inner packet. Therefore csum-calculation can not be offloaded if tunnel device requires GRE_CSUM. Following patch fixes it by computing inner packet checksum for GRE_CSUM type, for all other type of GRE devices csum is offloaded. CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>