path: root/net/ipv4/ip_vti.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-01-09vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnelSu Yanjun1-0/+50
Recently we run a network test over ipcomp virtual tunnel.We find that if a ipv4 packet needs fragment, then the peer can't receive it. We deep into the code and find that when packet need fragment the smaller fragment will be encapsulated by ipip not ipcomp. So when the ipip packet goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code always set skb'dev to the last fragment's dev. After ipv4 defrag processing, when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV error. This patch adds compatible support for the ipip process in ipcomp virtual tunnel. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-01ip: validate header length on virtual device xmitWillem de Bruijn1-3/+9
KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_redirect()Maciej Żenczykowski1-1/+1
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()Maciej Żenczykowski1-1/+1
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-19ip_vti: fix a null pointer deferrence when create vti fallback tunnelHaishuang Yan1-1/+2
After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will be NULL and will cause following crash: [ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941 [ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0 [ 2742.852818] Oops: 0002 [#1] SMP PTI [ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2 [ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014 [ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti] [ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00 [ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246 [ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013 [ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980 [ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000 [ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980 [ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000 [ 2742.870473] FS: 00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000 [ 2742.872143] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0 [ 2742.874821] Call Trace: [ 2742.875358] ops_init+0x38/0xf0 [ 2742.876078] setup_net+0xd9/0x1f0 [ 2742.876789] copy_net_ns+0xb7/0x130 [ 2742.877538] create_new_namespaces+0x11a/0x1d0 [ 2742.878525] unshare_nsproxy_namespaces+0x55/0xa0 [ 2742.879526] ksys_unshare+0x1a7/0x330 [ 2742.880313] __x64_sys_unshare+0xe/0x20 [ 2742.881131] do_syscall_64+0x5b/0x180 [ 2742.881933] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reproduce: echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net modprobe ip_vti unshare -n Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-19vti4: Don't override MTU passed on link creation via IFLA_MTUStefano Brivio1-1/+0
Don't hardcode a MTU value on vti tunnel initialization, ip_tunnel_newlink() is able to deal with this already. See also commit ffc2b6ee4174 ("ip_gre: fix IFLA_MTU ignored on NEWLINK"). Fixes: 1181412c1a67 ("net/ipv4: VTI support new module for ip_vti.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-03-19vti4: Don't count header length twice on tunnel setupStefano Brivio1-1/+0
This re-introduces the effect of commit a32452366b72 ("vti4: Don't count header length twice.") which was accidentally reverted by merge commit f895f0cfbb77 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec"). The commit message from Steffen Klassert said: We currently count the size of LL_MAX_HEADER and struct iphdr twice for vti4 devices, this leads to a wrong device mtu. The size of LL_MAX_HEADER and struct iphdr is already counted in ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init(). And this is still the case now: ip_tunnel_bind_dev() already accounts for the header length of the link layer (not necessarily LL_MAX_HEADER, if the output device is found), plus one IP header. For example, with a vti device on top of veth, with MTU of 1500, the existing implementation would set the initial vti MTU to 1332, accounting once for LL_MAX_HEADER (128, included in hard_header_len by vti) and twice for the same IP header (once from hard_header_len, once from ip_tunnel_bind_dev()). It should instead be 1480, because ip_tunnel_bind_dev() is able to figure out that the output device is veth, so no additional link layer header is attached, and will properly count one single IP header. The existing issue had the side effect of avoiding PMTUD for most xfrm policies, by arbitrarily lowering the initial MTU. However, the only way to get a consistent PMTU value is to let the xfrm PMTU discovery do its course, and commit d6af1a31cc72 ("vti: Add pmtu handling to vti_xmit.") now takes care of local delivery cases where the application ignores local socket notifications. Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code") Fixes: f895f0cfbb77 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-25net: don't call update_pmtu unconditionallyNicolas Dichtel1-1/+1
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01ip_vti: remove the useless err_count check in vti_xmitXin Long1-9/+0
Unlike ipip and gre, ip_vti never uses err_count in vti4_err, so no need to check err_count in vti_xmit, it's value always 0. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Just simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmitAlexey Kodanev1-1/+2
When running LTP IPsec tests, KASan might report: BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti] Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack+0x63/0x89 print_address_description+0x7c/0x290 kasan_report+0x28d/0x370 ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti] __asan_report_load4_noabort+0x19/0x20 vti_tunnel_xmit+0xeee/0xff0 [ip_vti] ? vti_init_net+0x190/0x190 [ip_vti] ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 dev_hard_start_xmit+0x147/0x510 ? icmp_echo.part.24+0x1f0/0x210 __dev_queue_xmit+0x1394/0x1c60 ... Freed by task 0: save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kmem_cache_free+0x81/0x1e0 kfree_skbmem+0xb1/0xe0 kfree_skb+0x75/0x170 kfree_skb_list+0x3e/0x60 __dev_queue_xmit+0x1298/0x1c60 dev_queue_xmit+0x10/0x20 neigh_resolve_output+0x3a8/0x740 ip_finish_output2+0x5c0/0xe70 ip_finish_output+0x4ba/0x680 ip_output+0x1c1/0x3a0 xfrm_output_resume+0xc65/0x13d0 xfrm_output+0x1e4/0x380 xfrm4_output_finish+0x5c/0x70 Can be fixed if we get skb->len before dst_output(). Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code") Fixes: 22e1b23dafa8 ("vti6: Support inter address family tunneling.") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv4: speedup ipv6 tunnels dismantleEric Dumazet1-4/+3
Implement exit_batch() method to dismantle more devices per round. (rtnl_lock() ... unregister_netdevice_many() ... rtnl_unlock()) Tested: $ cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait ; grep net_namespace /proc/slabinfo Before patch : $ time ./add_del_unshare.sh net_namespace 126 282 5504 1 2 : tunables 8 4 0 : slabdata 126 282 0 real 1m38.965s user 0m0.688s sys 0m37.017s After patch: $ time ./add_del_unshare.sh net_namespace 135 291 5504 1 2 : tunables 8 4 0 : slabdata 135 291 0 real 0m22.117s user 0m0.728s sys 0m35.328s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18vti: revert flush x-netns xfrm cache when vti interface is removedFlorian Westphal1-31/+0
flow cache is removed in next commit. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.changelinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08vti: check nla_put_* return valueHangbin Liu1-6/+7
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ip_tunnel: Allow policy-based routing through tunnelsCraig Gallek1-5/+15
This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18netns: make struct pernet_operations::id unsigned intAlexey Dobriyan1-1/+1
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09vti: use right inner_mode for inbound inter address family policy checksthomas.zeitlhofer+lkml@ze-it.at1-1/+14
In case of inter address family tunneling (IPv6 over vti4 or IPv4 over vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are using the wrong address family. As a result, all inbound inter address family traffic is dropped. Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the inner_mode that contains the right address family for the inbound policy checks. Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-08-09vti: flush x-netns xfrm cache when vti interface is removedLance Richardson1-0/+31
When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local remote key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 ip netns add secure ip link add vti_test type vti local remote key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo ip netns exec secure ip route add dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src dst \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src dst \ proto esp mode tunnel mark 1 ip xfrm state add src dst proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src dst proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31vti: Add pmtu handling to vti_xmit.Steffen Klassert1-0/+18
We currently rely on the PMTU discovery of xfrm. However if a packet is locally sent, the PMTU mechanism of xfrm tries to do local socket notification what might not work for applications like ping that don't check for this. So add pmtu handling to vti_xmit to report MTU changes immediately. Reported-by: Mark McKinstry <Mark.McKinstry@alliedtelesis.co.nz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-12-25ip_tunnel: Move stats update to iptunnel_xmit()Pravin B Shelar1-1/+1
By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30net: remove unnecessary mroute.h includesNikolay Aleksandrov1-1/+0
It looks like many files are including mroute.h unnecessarily, so remove the include. Most importantly remove it from ipv6. CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: Pass net into dst_output and remove dst_output_okfnEric W. Biederman1-1/+1
Replace dst_output_okfn with dst_output Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17net: Merge dst_output and dst_output_skEric W. Biederman1-1/+1
Add a sock paramter to dst_output making dst_output_sk superfluous. Add a skb->sk parameter to all of the callers of dst_output Have the callers of dst_output_sk call dst_output. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-28ip_vti/ip6_vti: Preserve skb->mark after rcv_cb callAlexander Duyck1-2/+7
The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified after completing the function. This resulted in the original skb->mark value being lost. Since we only need skb->mark to be set for xfrm_policy_check we can pull the assignment into the rcv_cb calls and then just restore the original mark after xfrm_policy_check has been completed. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-28ip_vti/ip6_vti: Do not touch skb->mark on xmitAlexander Duyck1-2/+3
Instead of modifying skb->mark we can simply modify the flowi_mark that is generated as a result of the xfrm_decode_session. By doing this we don't need to actually touch the skb->mark and it can be preserved as it passes out through the tunnel. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-03ipv4: coding style: comparison for inequality with NULLIan Morris1-1/+1
The ipv4 code uses a mixture of coding styles. In some instances check for non-NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ipip,gre,vti,sit: implement ndo_get_iflinkNicolas Dichtel1-1/+1
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc1-2/+2
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc1-2/+2
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19tunnels: advertise link netns via netlinkNicolas Dichtel1-0/+1
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23ip_tunnel: the lack of vti_link_ops' dellink() cause kernel paniclucien1-0/+1
Now the vti_link_ops do not point the .dellink, for fb tunnel device (ip_vti0), the net_device will be removed as the default .dellink is unregister_netdevice_queue,but the tunnel still in the tunnel list, then if we add a new vti tunnel, in ip_tunnel_find(): hlist_for_each_entry_rcu(t, head, hash_node) { if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr && link == t->parms.link && ==> type == t->dev->type && ip_tunnel_key_match(&t->parms, flags, key)) break; } the panic will happen, cause dev of ip_tunnel *t is null: [ 3835.072977] IP: [<ffffffffa04103fd>] ip_tunnel_find+0x9d/0xc0 [ip_tunnel] [ 3835.073008] PGD b2c21067 PUD b7277067 PMD 0 [ 3835.073008] Oops: 0000 [#1] SMP ..... [ 3835.073008] Stack: [ 3835.073008] ffff8800b72d77f0 ffffffffa0411924 ffff8800bb956000 ffff8800b72d78e0 [ 3835.073008] ffff8800b72d78a0 0000000000000000 ffffffffa040d100 ffff8800b72d7858 [ 3835.073008] ffffffffa040b2e3 0000000000000000 0000000000000000 0000000000000000 [ 3835.073008] Call Trace: [ 3835.073008] [<ffffffffa0411924>] ip_tunnel_newlink+0x64/0x160 [ip_tunnel] [ 3835.073008] [<ffffffffa040b2e3>] vti_newlink+0x43/0x70 [ip_vti] [ 3835.073008] [<ffffffff8150d4da>] rtnl_newlink+0x4fa/0x5f0 [ 3835.073008] [<ffffffff812f68bb>] ? nla_strlcpy+0x5b/0x70 [ 3835.073008] [<ffffffff81508fb0>] ? rtnl_link_ops_get+0x40/0x60 [ 3835.073008] [<ffffffff8150d11f>] ? rtnl_newlink+0x13f/0x5f0 [ 3835.073008] [<ffffffff81509cf4>] rtnetlink_rcv_msg+0xa4/0x270 [ 3835.073008] [<ffffffff8126adf5>] ? sock_has_perm+0x75/0x90 [ 3835.073008] [<ffffffff81509c50>] ? rtnetlink_rcv+0x30/0x30 [ 3835.073008] [<ffffffff81529e39>] netlink_rcv_skb+0xa9/0xc0 [ 3835.073008] [<ffffffff81509c48>] rtnetlink_rcv+0x28/0x30 .... modprobe ip_vti ip link del ip_vti0 type vti ip link add ip_vti0 type vti rmmod ip_vti do that one or more times, kernel will panic. fix it by assigning ip_tunnel_dellink to vti_link_ops' dellink, in which we skip the unregister of fb tunnel device. do the same on ip6_vti. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet1-1/+1
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-26vti: Simplify error handling in module init and exitMathias Krause1-33/+21
The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-06-11ip_vti: Fix 'ip tunnel add' with 'key' parametersDmitry Popov1-1/+7
ip tunnel add remote local mode vti ikey 1 okey 2 translates to p->iflags = VTI_ISVTI|GRE_KEY and p->i_key = 1, but GRE_KEY != TUNNEL_KEY, so ip_tunnel_ioctl would set i_key to 0 (same story with o_key) making us unable to create vti tunnels with [io]key via ip tunnel. We cannot simply translate GRE_KEY to TUNNEL_KEY (as GRE module does) because vti_tunnels with same local/remote addresses but different ikeys will be treated as different then. So, imo the best option here is to move p->i_flags & *_KEY check for vti tunnels from ip_tunnel.c to ip_vti.c and to think about [io]_mark field for ip_tunnel_parm in the future. Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller1-1/+4
Conflicts: net/ipv4/ip_vti.c Steffen Klassert says: ==================== pull request (net): ipsec 2014-05-15 This pull request has a merge conflict in net/ipv4/ip_vti.c between commit 8d89dcdf80d8 ("vti: don't allow to add the same tunnel twice") and commit a32452366b72 ("vti4:Don't count header length twice"). It can be solved like it is done in linux-next. 1) Fix a ipv6 xfrm output crash when a packet is rerouted by netfilter to not use IPsec. 2) vti4 counts some header lengths twice leading to an incorrect device mtu. Fix this by counting these headers only once. 3) We don't catch the case if an unsupported protocol is submitted to the xfrm protocol handlers, this can lead to NULL pointer dereferences. Fix this by adding the appropriate checks. 4) vti6 may unregister pernet ops twice on init errors. Fix this by removing one of the calls to do it only once. From Mathias Krause. 5) Set the vti tunnel mark before doing a lookup in the error handlers. Otherwise we don't find the correct xfrm state. ==================== The conflict in ip_vti.c was simple, 'net' had a commit removing a line from vti_tunnel_init() and this tree being merged had a commit adding a line to the same location. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12vti: Use the tunnel mark for lookup in the error handlers.Steffen Klassert1-1/+4
We need to use the mark we get from the tunnels o_key to lookup the right vti state in the error handlers. This patch ensures that. Fixes: df3893c1 ("vti: Update the ipv4 side to use it's own receive hook.") Fixes: fa9ad96d ("vti6: Update the ipv6 side to use its own receive hook.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-16vti4: Don't count header length twice.Steffen Klassert1-1/+0
We currently count the size of LL_MAX_HEADER and struct iphdr twice for vti4 devices, this leads to a wrong device mtu. The size of LL_MAX_HEADER and struct iphdr is already counted in ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init(). Fixes: b9959fd3 ("vti: switch to new ip tunnel code") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-12vti: don't allow to add the same tunnel twiceNicolas Dichtel1-1/+1
Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote local key 41 ip l a vti2 type vti remote local key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25vti4: Enable namespace changingSteffen Klassert1-1/+0
vti4 is now fully namespace aware, so allow namespace changing for vti devices Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25vti4: Check the tunnel endpoints of the xfrm state and the vti interfaceSteffen Klassert1-5/+24
The tunnel endpoints of the xfrm_state we got from the xfrm_lookup must match the tunnel endpoints of the vti interface. This patch ensures this matching. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25vti4: Support inter address family tunneling.Steffen Klassert1-14/+34
With this patch we can tunnel ipv6 traffic via a vti4 interface. A vti4 interface can now have an ipv6 address and ipv6 traffic can be routed via a vti4 interface. The resulting traffic is xfrm transformed and tunneled throuhg ipv4 if matching IPsec policies and states are present. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25vti4: Use the on xfrm_lookup returned dst_entry directlySteffen Klassert1-11/+11
We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25vti: Update the ipv4 side to use it's own receive hook.Steffen Klassert1-47/+187
With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-18ipv4: be friend with drop monitorEric Dumazet1-1/+1
Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04net: unify the pcpu_tstats and br_cpu_netstats as oneLi RongQing1-1/+1
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19xfrm: Release dst if this dst is improper for vti tunnelfan.du1-0/+1
After searching rt by the vti tunnel dst/src parameter, if this rt has neither attached to any transformation nor the transformation is not tunnel oriented, this rt should be released back to ip layer. otherwise causing dst memory leakage. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+11
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>