aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/netfilter (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-13ipv6: mcast: better catch silly mtu valuesEric Dumazet1-10/+15
syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13Revert "ravb: add workaround for clock when resuming with WoL enabled"Geert Uytterhoeven1-25/+2
This reverts commit fbf3d034f2ff6264183cfa6845770e8cc2a986c8. As of commit 560869100b99a3da ("clk: renesas: cpg-mssr: Restore module clocks during resume"), the workaround is no longer needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-12tcp md5sig: Use skb's saddr when replying to an incoming segmentChristoph Paasch2-2/+2
The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11fou: fix some member types in guehdrXin Long1-9/+9
guehdr struct is used to build or parse gue packets, which are always in big endian. It's better to define all guehdr members as __beXX types. Also, in validate_gue_flags it's not good to use a __be32 variable for both Standard flags(__be16) and Private flags (__be32), and pass it to other funcions. This patch could fix a bunch of sparse warnings from fou. Fixes: 5024c33ac354 ("gue: Add infrastructure for flags and options") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11sctp: make sure stream nums can match optlen in sctp_setsockopt_reset_streamsXin Long1-1/+5
Now in sctp_setsockopt_reset_streams, it only does the check optlen < sizeof(*params) for optlen. But it's not enough, as params->srs_number_streams should also match optlen. If the streams in params->srs_stream_list are less than stream nums in params->srs_number_streams, later when dereferencing the stream list, it could cause a slab-out-of-bounds crash, as reported by syzbot. This patch is to fix it by also checking the stream numbers in sctp_setsockopt_reset_streams to make sure at least it's not greater than the streams in the list. Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11net: ipv4: fix for a race condition in raw_sendmsgMohamed Ghannam1-5/+10
inet->hdrincl is racy, and could lead to uninitialized stack pointer usage, so its value should be read only once. Fixes: c008ba5bdc9f ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt") Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11netlink: Add netns check on tapsKevin Cernekee1-0/+3
Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11net: sh_eth: do not advertise Gigabit capabilities when not availableThomas Petazzoni1-0/+10
Not all variants of the sh_eth hardware have Gigabit support. Unfortunately, the current driver doesn't tell the PHY about the limited MAC capabilities. Due to this, if you have a Gigabit capable PHY, the PHY will advertise its Gigabit capability and establish a link at 1Gbit/s, even though the MAC doesn't support it. In order to avoid this, we use the recently introduced phy_set_max_speed() to tell the PHY to not advertise speed higher than 100 MBit/s. Tested on a SH7786 platform, with a Gigabit PHY. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11net: phy: meson-gxl: detect LPA corruptionJerome Brunet1-1/+73
The purpose of this change is to fix the incorrect detection of the link partner (LP) advertised capabilities which sometimes happens with this PHY (roughly 1 time in a dozen) This issue may cause the link to be negotiated at 10Mbps/Full or 10Mbps/Half when 100MBps/Full is actually possible. In some case, the link is even completely broken and no communication is possible. To detect the corruption, we must look for a magic undocumented bit in the WOL bank (hint given by the SoC vendor kernel) but this is not enough to cover all cases. We also have to look at the LPA ack. If the LP supports Aneg but did not ack our base code when aneg is completed, we assume something went wrong. The detection of a corrupted LPA triggers a restart of the aneg process. This solves the problem but may take up to 6 retries to complete. Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11ptr_ring: add barriersMichael S. Tsirkin1-0/+9
Users of ptr_ring expect that it's safe to give the data structure a pointer and have it be available to consumers, but that actually requires an smb_wmb or a stronger barrier. In absence of such barriers and on architectures that reorder writes, consumer might read an un=initialized value from an skb pointer stored in the skb array. This was observed causing crashes. To fix, add memory barriers. The barrier we use is a wmb, the assumption being that producers do not need to read the value so we do not need to order these reads. Reported-by: George Cherian <george.cherian@cavium.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11mac80211: fix locking in ieee80211_sta_tear_down_BA_sessionsJohannes Berg1-3/+2
Due to overlap between commit 1281103770e9 ("mac80211: Simplify locking in ieee80211_sta_tear_down_BA_sessions()") and the way that Luca modified commit 72e2c3438ba3 ("mac80211: tear down RX aggregations first") when sending it upstream from Intel's internal tree, we get the following warning: WARNING: CPU: 0 PID: 5472 at net/mac80211/agg-tx.c:315 ___ieee80211_stop_tx_ba_session+0x158/0x1f0 since there's no appropriate locking around the call to ___ieee80211_stop_tx_ba_session; Sara's original just had a call to the locked __ieee80211_stop_tx_ba_session (one less underscore) but it looks like Luca modified both of the calls when fixing it up for upstream, leading to the problem at hand. Move the locking appropriately to fix this problem. Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-08kmemcheck: rip it out for realMichal Hocko13-13/+0
Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-08net: mvpp2: fix the RSS table entry offsetAntoine Tenart1-1/+1
The macro used to access or set an RSS table entry was using an offset of 8, while it should use an offset of 0. This lead to wrongly configure the RSS table, not accessing the right entries. Fixes: 1d7d15d79fb4 ("net: mvpp2: initialize the RSS tables") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp: evaluate packet losses upon RTT changeYuchung Cheng1-11/+8
RACK skips an ACK unless it advances the most recently delivered TX timestamp (rack.mstamp). Since RACK also uses the most recent RTT to decide if a packet is lost, RACK should still run the loss detection whenever the most recent RTT changes. For example, an ACK that does not advance the timestamp but triggers the cwnd undo due to reordering, would then use the most recent (higher) RTT measurement to detect further losses. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp: fix off-by-one bug in RACKYuchung Cheng1-3/+3
RACK should mark a packet lost when remaining wait time is zero. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp: always evaluate losses in RACK upon undoYuchung Cheng1-0/+1
When sender detects spurious retransmission, all packets marked lost are remarked to be in-flight. However some may be considered lost based on its timestamps in RACK. This patch forces RACK to re-evaluate, which may be skipped previously if the ACK does not advance RACK timestamp. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp: correctly test congestion state in RACKYuchung Cheng1-1/+2
RACK does not test the loss recovery state correctly to compute the reordering window. It assumes if lost_out is zero then TCP is not in loss recovery. But it can be zero during recovery before calling tcp_rack_detect_loss(): when an ACK acknowledges all packets marked lost before receiving this ACK, but has not yet to discover new ones by tcp_rack_detect_loss(). The fix is to simply test the congestion state directly. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08bnxt_en: Fix sources of spurious netpoll warningsCalvin Owens1-2/+2
After applying 2270bc5da3497945 ("bnxt_en: Fix netpoll handling") and 903649e718f80da2 ("bnxt_en: Improve -ENOMEM logic in NAPI poll loop."), we still see the following WARN fire: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1875170 at net/core/netpoll.c:165 netpoll_poll_dev+0x15a/0x160 bnxt_poll+0x0/0xd0 exceeded budget in poll <snip> Call Trace: [<ffffffff814be5cd>] dump_stack+0x4d/0x70 [<ffffffff8107e013>] __warn+0xd3/0xf0 [<ffffffff8107e07f>] warn_slowpath_fmt+0x4f/0x60 [<ffffffff8179519a>] netpoll_poll_dev+0x15a/0x160 [<ffffffff81795f38>] netpoll_send_skb_on_dev+0x168/0x250 [<ffffffff817962fc>] netpoll_send_udp+0x2dc/0x440 [<ffffffff815fa9be>] write_ext_msg+0x20e/0x250 [<ffffffff810c8125>] call_console_drivers.constprop.23+0xa5/0x110 [<ffffffff810c9549>] console_unlock+0x339/0x5b0 [<ffffffff810c9a88>] vprintk_emit+0x2c8/0x450 [<ffffffff810c9d5f>] vprintk_default+0x1f/0x30 [<ffffffff81173df5>] printk+0x48/0x50 [<ffffffffa0197713>] edac_raw_mc_handle_error+0x563/0x5c0 [edac_core] [<ffffffffa0197b9b>] edac_mc_handle_error+0x42b/0x6e0 [edac_core] [<ffffffffa01c3a60>] sbridge_mce_output_error+0x410/0x10d0 [sb_edac] [<ffffffffa01c47cc>] sbridge_check_error+0xac/0x130 [sb_edac] [<ffffffffa0197f3c>] edac_mc_workq_function+0x3c/0x90 [edac_core] [<ffffffff81095f8b>] process_one_work+0x19b/0x480 [<ffffffff810967ca>] worker_thread+0x6a/0x520 [<ffffffff8109c7c4>] kthread+0xe4/0x100 [<ffffffff81884c52>] ret_from_fork+0x22/0x40 This happens because we increment rx_pkts on -ENOMEM and -EIO, resulting in rx_pkts > 0. Fix this by only bumping rx_pkts if we were actually given a non-zero budget. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp_bbr: reset long-term bandwidth sampling on loss recovery undoNeal Cardwell1-0/+1
Fix BBR so that upon notification of a loss recovery undo BBR resets long-term bandwidth sampling. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this can cause BBR to spuriously estimate that we are seeing loss rates high enough to trigger long-term bandwidth estimation. To avoid that problem, this commit resets long-term bandwidth sampling on loss recovery undo events. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp_bbr: reset full pipe detection on loss recovery undoNeal Cardwell1-0/+4
Fix BBR so that upon notification of a loss recovery undo BBR resets the full pipe detection (STARTUP exit) state machine. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this could previously cause BBR to spuriously estimate that the pipe is full. Since spurious loss recovery means that our overall sending will have slowed down spuriously, this commit gives a flow more time to probe robustly for bandwidth and decide the pipe is really full. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08tcp_bbr: record "full bw reached" decision in new full_bw_reached bitNeal Cardwell1-2/+5
This commit records the "full bw reached" decision in a new full_bw_reached bit. This is a pure refactor that does not change the current behavior, but enables subsequent fixes and improvements. In particular, this enables simple and clean fixes because the full_bw and full_bw_cnt can be unconditionally zeroed without worrying about forgetting that we estimated we filled the pipe in Startup. And it enables future improvements because multiple code paths can be used for estimating that we filled the pipe in Startup; any new code paths only need to set this bit when they think the pipe is full. Note that this fix intentionally reduces the width of the full_bw_cnt counter, since we have never used the most significant bit. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08sfc: pass valid pointers from efx_enqueue_unwindBert Kenward1-1/+4
The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers cannot be NULL. Add a paranoid warning to check this condition and fix the one case where they were NULL. efx_enqueue_unwind() is called very rarely, during error handling. Without this fix it would fail with a NULL pointer dereference in efx_dequeue_buffer, with efx_enqueue_skb in the call stack. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Tested-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08gianfar: Disable EEE autoneg by defaultClaudiu Manoil1-0/+5
This controller does not support EEE, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that gianfar connects to, to prevent the above unwanted outcome. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Tested-by: Yangbo Lu <Yangbo.lu@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08of: overlay: Make node skipping in init_overlay_changeset() clearerGeert Uytterhoeven1-10/+11
Make it more clear that nodes without "__overlay__" subnodes are skipped, by reverting the logic and using continue. This also reduces indentation level. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-08of: overlay: Fix out-of-bounds write in init_overlay_changeset()Geert Uytterhoeven1-3/+4
If an overlay has no "__symbols__" node, but it has nodes without "__overlay__" subnodes at the end (e.g. a "__fixups__" node), after filling in all fragments for nodes with "__overlay__" subnodes, "fragment = &fragments[cnt]" will point beyond the end of the allocated array. Hence writing to "fragment->overlay" will overwrite unallocated memory, which may lead to a crash later. Fix this by deferring both the assignment to "fragment" and the offending write afterwards until we know for sure the node has an "__overlay__" subnode, and thus a valid entry in "fragments[]". Fixes: 61b4de4e0b384f4a ("of: overlay: minor restructuring") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-08tcp: invalidate rate samples during SACK renegingYousuk Seung5-7/+19
Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08can: peak/pcie_fd: fix potential bug in restarting tx queueStephane Grosjean1-6/+3
Don't rely on can_get_echo_skb() return value to wake the network tx queue up: can_get_echo_skb() returns 0 if the echo array slot was not occupied, but also when the DLC of the released echo frame was 0. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-08can: usb_8dev: cancel urb on -EPIPE and -EPROTOMartin Kelly1-0/+2
In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-08can: kvaser_usb: cancel urb on -EPIPE and -EPROTOMartin Kelly1-0/+2
In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-08can: esd_usb2: cancel urb on -EPIPE and -EPROTOMartin Kelly1-0/+2
In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-08can: ems_usb: cancel urb on -EPIPE and -EPROTOMartin Kelly1-0/+2
In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-08can: mcba_usb: cancel urb on -EPROTOMartin Kelly1-0/+1
When we unplug the device, we can see both -EPIPE and -EPROTO depending on exact timing and what system we run on. If we continue to resubmit URBs, they will immediately fail, and they can cause stalls, especially on slower CPUs. Fix this by not resubmitting on -EPROTO, as we already do on -EPIPE. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-07usbnet: fix alignment for frames with no ethernet headerBjørn Mork3-1/+7
The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07tcp: use current time in tcp_rcv_space_adjust()Eric Dumazet1-0/+1
When I switched rcv_rtt_est to high resolution timestamps, I forgot that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust() Using an old timestamp leads to autotuning lags. Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07netlink: Relax attr validation for fixed length typesDavid Ahern1-6/+16
Commit 28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types") requires attributes using types NLA_U* and NLA_S* to have an exact length. This change is exposing bugs in various userspace commands that are sending attributes with an invalid length (e.g., attribute has type NLA_U8 and userspace sends NLA_U32). While the commands are clearly broken and need to be fixed, users are arguing that the sudden change in enforcement is breaking older commands on newer kernels for use cases that otherwise "worked". Relax the validation to print a warning mesage similar to what is done for messages containing extra bytes after parsing. Fixes: 28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types") Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07adding missing rcu_read_unlock in ipxip6_rcvNikita V. Shirokov1-1/+1
commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: dsa: mv88e6xxx: Unregister MDIO bus on error pathAndrew Lunn1-14/+16
The MDIO busses need to be unregistered before they are freed, otherwise BUG() is called. Add a call to the unregister code if the registration fails, since we can have multiple busses, of which some may correctly register before one fails. This requires moving the code around a little. Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: dsa: mv88e6xxx: Fix interrupt masking on removalAndrew Lunn1-2/+2
When removing the interrupt handling code, we should mask the generation of interrupts. The code however unmasked all interrupts. This can then cause a new interrupt. We then get into a deadlock where the interrupt thread is waiting to run, and the code continues, trying to remove the interrupt handler, which means waiting for the thread to complete. On a UP machine this deadlocks. Fix so we really mask interrupts in the hardware. The same error is made in the error path when install the interrupt handling code. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: ethernet: arc: fix error handling in emac_rockchip_probeBranislav Radocaj1-2/+5
If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Branislav Radocaj <branislav@radocaj.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: mvmdio: disable/unprepare clocks in EPROBE_DEFER caseTobias Jordan1-1/+2
add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07virtio_net: fix return value check in receive_mergeable()Yunjian Wang1-1/+1
The function virtqueue_get_buf_ctx() could return NULL, the return value 'buf' need to be checked with NULL, not value 'ctx'. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-07virtio_mmio: add cleanup for virtio_mmio_removeweiping zhang1-0/+6
cleanup all resource allocated by virtio_mmio_probe. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-12-07virtio_mmio: add cleanup for virtio_mmio_probeweiping zhang1-10/+41
As mentioned at drivers/base/core.c: /* * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up the * reference initialized in this function instead. */ so we don't free vm_dev until vm_dev.dev.release be called. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-12-07drm/bridge: analogix dp: Fix runtime PM state in get_modes() callbackMarek Szyprowski1-0/+2
get_modes() callback might be called asynchronously from the DRM core and it is not synchronized with bridge_enable(), which sets proper runtime PM state of the main DP device. Fix this by calling pm_runtime_get_sync() before calling drm_get_edid(), which in turn calls drm_dp_i2c_xfer() and analogix_dp_transfer() to ensure that main DP device is runtime active when doing any access to its registers. This fixes the following kernel issue on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 62 Comm: kworker/0:2 Not tainted 4.13.0-rc2-00364-g4a97a3da420b #3357 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events output_poll_execute task: edc14800 task.stack: edcb2000 PC is at analogix_dp_transfer+0x15c/0x2fc LR is at analogix_dp_transfer+0x134/0x2fc pc : [<c0468538>] lr : [<c0468510>] psr: 60000013 sp : edcb3be8 ip : 0000002a fp : 00000001 r10: 00000000 r9 : edcb3cd8 r8 : edcb3c40 r7 : 00000000 r6 : edd3b380 r5 : edd3b010 r4 : 00000064 r3 : 00000000 r2 : f0ad3000 r1 : edcb3c40 r0 : edd3b010 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process kworker/0:2 (pid: 62, stack limit = 0xedcb2210) Stack: (0xedcb3be8 to 0xedcb4000) [<c0468538>] (analogix_dp_transfer) from [<c0424ba4>] (drm_dp_i2c_do_msg+0x8c/0x2b4) [<c0424ba4>] (drm_dp_i2c_do_msg) from [<c0424e64>] (drm_dp_i2c_xfer+0x98/0x214) [<c0424e64>] (drm_dp_i2c_xfer) from [<c057b2d8>] (__i2c_transfer+0x140/0x29c) [<c057b2d8>] (__i2c_transfer) from [<c057b4a4>] (i2c_transfer+0x70/0xe4) [<c057b4a4>] (i2c_transfer) from [<c0441de4>] (drm_do_probe_ddc_edid+0xb4/0x114) [<c0441de4>] (drm_do_probe_ddc_edid) from [<c0441e5c>] (drm_probe_ddc+0x18/0x28) [<c0441e5c>] (drm_probe_ddc) from [<c0445728>] (drm_get_edid+0x124/0x2d4) [<c0445728>] (drm_get_edid) from [<c0465ea0>] (analogix_dp_get_modes+0x90/0x114) [<c0465ea0>] (analogix_dp_get_modes) from [<c0425e8c>] (drm_helper_probe_single_connector_modes+0x198/0x68c) [<c0425e8c>] (drm_helper_probe_single_connector_modes) from [<c04325d4>] (drm_setup_crtcs+0x1b4/0xd18) [<c04325d4>] (drm_setup_crtcs) from [<c04344a8>] (drm_fb_helper_hotplug_event+0x94/0xd0) [<c04344a8>] (drm_fb_helper_hotplug_event) from [<c0425a50>] (drm_kms_helper_hotplug_event+0x24/0x28) [<c0425a50>] (drm_kms_helper_hotplug_event) from [<c04263ec>] (output_poll_execute+0x6c/0x174) [<c04263ec>] (output_poll_execute) from [<c0136f18>] (process_one_work+0x188/0x3fc) [<c0136f18>] (process_one_work) from [<c01371f4>] (worker_thread+0x30/0x4b8) [<c01371f4>] (worker_thread) from [<c013daf8>] (kthread+0x128/0x164) [<c013daf8>] (kthread) from [<c0108510>] (ret_from_fork+0x14/0x24) Code: 0a000002 ea000009 e2544001 0a00004a (e59537c8) ---[ end trace cddc7919c79f7878 ]--- Reported-by: Misha Komarovskiy <zombah@gmail.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171121074936.22520-1-m.szyprowski@samsung.com
2017-12-07brcmfmac: Avoid build error with make W=1Andy Shevchenko1-1/+1
When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for the first run, all next ones are okay. CC [M] drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union! scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed Seems like something happened with W=1 and wrong kernel doc format. As a quick fix remove dubious /** in the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"Radhakrishna Sripada2-16/+0
This reverts commit 8f067837c4b713ce2e69be95af7b2a5eb3bd7de8. HSD says "WA withdrawn. It was causing corruption with some images. WA is not strictly necessary since this bug just causes loss of FBC compression with some sizes and images, but doesn't break anything." Fixes: 8f067837c4b7 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171117010825.23118-1-radhakrishna.sripada@intel.com (cherry picked from commit 0cfecb7c4b9b45ed1776162e132b43f92564f3f4) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-07drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usageBoris Brezillon1-1/+2
With CONFIG_REFCOUNT_FULL enabled, refcount_inc() complains when it's passed a refcount object that has its counter set to 0. In this driver, this is a valid use case since we want to increment ->usecnt only when the BO object starts to be used by real HW components and this is definitely not the case when the BO is created. Fix the problem by using refcount_inc_not_zero() instead of refcount_inc() and fallback to refcount_set(1) when refcount_inc_not_zero() returns false. Note that this 2-steps operation is not racy here because the whole section is protected by a mutex which guarantees that the counter does not change between the refcount_inc_not_zero() and refcount_set() calls. Fixes: b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20171122203928.28135-1-boris.brezillon@free-electrons.com
2017-12-07drm/i915: Call i915_gem_init_userptr() before taking struct_mutexChris Wilson1-6/+5
We don't need struct_mutex to initialise userptr (it just allocates a workqueue for itself etc), but we do need struct_mutex later on in i915_gem_init() in order to feed requests onto the HW. This should break the chain [ 385.697902] ====================================================== [ 385.697907] WARNING: possible circular locking dependency detected [ 385.697913] 4.14.0-CI-Patchwork_7234+ #1 Tainted: G U [ 385.697917] ------------------------------------------------------ [ 385.697922] perf_pmu/2631 is trying to acquire lock: [ 385.697927] (&mm->mmap_sem){++++}, at: [<ffffffff811bfe1e>] __might_fault+0x3e/0x90 [ 385.697941] but task is already holding lock: [ 385.697946] (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0 [ 385.697957] which lock already depends on the new lock. [ 385.697963] the existing dependency chain (in reverse order) is: [ 385.697970] -> #4 (&cpuctx_mutex){+.+.}: [ 385.697980] __mutex_lock+0x86/0x9b0 [ 385.697985] perf_event_init_cpu+0x5a/0x90 [ 385.697991] perf_event_init+0x178/0x1a4 [ 385.697997] start_kernel+0x27f/0x3f1 [ 385.698003] verify_cpu+0x0/0xfb [ 385.698006] -> #3 (pmus_lock){+.+.}: [ 385.698015] __mutex_lock+0x86/0x9b0 [ 385.698020] perf_event_init_cpu+0x21/0x90 [ 385.698025] cpuhp_invoke_callback+0xca/0xc00 [ 385.698030] _cpu_up+0xa7/0x170 [ 385.698035] do_cpu_up+0x57/0x70 [ 385.698039] smp_init+0x62/0xa6 [ 385.698044] kernel_init_freeable+0x97/0x193 [ 385.698050] kernel_init+0xa/0x100 [ 385.698055] ret_from_fork+0x27/0x40 [ 385.698058] -> #2 (cpu_hotplug_lock.rw_sem){++++}: [ 385.698068] cpus_read_lock+0x39/0xa0 [ 385.698073] apply_workqueue_attrs+0x12/0x50 [ 385.698078] __alloc_workqueue_key+0x1d8/0x4d8 [ 385.698134] i915_gem_init_userptr+0x5f/0x80 [i915] [ 385.698176] i915_gem_init+0x7c/0x390 [i915] [ 385.698213] i915_driver_load+0x99e/0x15c0 [i915] [ 385.698250] i915_pci_probe+0x33/0x90 [i915] [ 385.698256] pci_device_probe+0xa1/0x130 [ 385.698262] driver_probe_device+0x293/0x440 [ 385.698267] __driver_attach+0xde/0xe0 [ 385.698272] bus_for_each_dev+0x5c/0x90 [ 385.698277] bus_add_driver+0x16d/0x260 [ 385.698282] driver_register+0x57/0xc0 [ 385.698287] do_one_initcall+0x3e/0x160 [ 385.698292] do_init_module+0x5b/0x1fa [ 385.698297] load_module+0x2374/0x2dc0 [ 385.698302] SyS_finit_module+0xaa/0xe0 [ 385.698307] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 385.698311] -> #1 (&dev->struct_mutex){+.+.}: [ 385.698320] __mutex_lock+0x86/0x9b0 [ 385.698361] i915_mutex_lock_interruptible+0x4c/0x130 [i915] [ 385.698403] i915_gem_fault+0x206/0x760 [i915] [ 385.698409] __do_fault+0x1a/0x70 [ 385.698413] __handle_mm_fault+0x7c4/0xdb0 [ 385.698417] handle_mm_fault+0x154/0x300 [ 385.698440] __do_page_fault+0x2d6/0x570 [ 385.698445] page_fault+0x22/0x30 [ 385.698449] -> #0 (&mm->mmap_sem){++++}: [ 385.698459] lock_acquire+0xaf/0x200 [ 385.698464] __might_fault+0x68/0x90 [ 385.698470] _copy_to_user+0x1e/0x70 [ 385.698475] perf_read+0x1aa/0x290 [ 385.698480] __vfs_read+0x23/0x120 [ 385.698484] vfs_read+0xa3/0x150 [ 385.698488] SyS_read+0x45/0xb0 [ 385.698493] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 385.698497] other info that might help us debug this: [ 385.698505] Chain exists of: &mm->mmap_sem --> pmus_lock --> &cpuctx_mutex [ 385.698517] Possible unsafe locking scenario: [ 385.698522] CPU0 CPU1 [ 385.698526] ---- ---- [ 385.698529] lock(&cpuctx_mutex); [ 385.698553] lock(pmus_lock); [ 385.698558] lock(&cpuctx_mutex); [ 385.698564] lock(&mm->mmap_sem); [ 385.698568] *** DEADLOCK *** [ 385.698574] 1 lock held by perf_pmu/2631: [ 385.698578] #0: (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0 [ 385.698589] stack backtrace: [ 385.698595] CPU: 3 PID: 2631 Comm: perf_pmu Tainted: G U 4.14.0-CI-Patchwork_7234+ #1 [ 385.698602] Hardware name: /NUC6CAYB, BIOS AYAPLCEL.86A.0040.2017.0619.1722 06/19/2017 [ 385.698609] Call Trace: [ 385.698615] dump_stack+0x5f/0x86 [ 385.698621] print_circular_bug.isra.18+0x1d0/0x2c0 [ 385.698627] __lock_acquire+0x19c3/0x1b60 [ 385.698634] ? generic_exec_single+0x77/0xe0 [ 385.698640] ? lock_acquire+0xaf/0x200 [ 385.698644] lock_acquire+0xaf/0x200 [ 385.698650] ? __might_fault+0x3e/0x90 [ 385.698655] __might_fault+0x68/0x90 [ 385.698660] ? __might_fault+0x3e/0x90 [ 385.698665] _copy_to_user+0x1e/0x70 [ 385.698670] perf_read+0x1aa/0x290 [ 385.698675] __vfs_read+0x23/0x120 [ 385.698682] ? __fget+0x101/0x1f0 [ 385.698686] vfs_read+0xa3/0x150 [ 385.698691] SyS_read+0x45/0xb0 [ 385.698696] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 385.698701] RIP: 0033:0x7ff1c46876ed [ 385.698705] RSP: 002b:00007fff13552f90 EFLAGS: 00000293 ORIG_RAX: 0000000000000000 [ 385.698712] RAX: ffffffffffffffda RBX: ffffc90000647ff0 RCX: 00007ff1c46876ed [ 385.698718] RDX: 0000000000000010 RSI: 00007fff13552fa0 RDI: 0000000000000005 [ 385.698723] RBP: 000056063d300580 R08: 0000000000000000 R09: 0000000000000060 [ 385.698729] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000046 [ 385.698734] R13: 00007fff13552c6f R14: 00007ff1c6279d00 R15: 00007ff1c6279a40 Testcase: igt/perf_pmu Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171122172621.16158-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit ee48700dd57d9ce783ec40f035b324d0b75632e4) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-07s390: fix compat system call tableHeiko Carstens1-3/+3
When wiring up the socket system calls the compat entries were incorrectly set. Not all of them point to the corresponding compat wrapper functions, which clear the upper 33 bits of user space pointers, like it is required. Fixes: 977108f89c989 ("s390: wire up separate socketcalls system calls") Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-06proc: show si_ptr in /proc/<pid>/timers without hashingLinus Torvalds1-1/+1
It's a user pointer, and while the permissions of the file are pretty questionable (should it really be readable to everybody), hashing the pointer isn't going to be the solution. We should take a closer look at more of the /proc/<pid> file permissions in general. Sure, we do want many of them to often be readable (for 'ps' and friends), but I think we should probably do a few conversions from S_IRUGO to S_IRUSR. Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.