aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/netfilter (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-03-15Revert "netfilter: x_tables: Switch synchronization to RCU"Mark Tomlinson2-14/+14
This reverts commit cc00bcaa589914096edef7fb87ca5cee4a166b5c. This (and the preceding) patch basically re-implemented the RCU mechanisms of patch 784544739a25. That patch was replaced because of the performance problems that it created when replacing tables. Now, we have the same issue: the call to synchronize_rcu() makes replacing tables slower by as much as an order of magnitude. Prior to using RCU a script calling "iptables" approx. 200 times was taking 1.16s. With RCU this increased to 11.59s. Revert these patches and fix the issue in a different way. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-03-15Revert "netfilter: x_tables: Update remaining dereference to RCU"Mark Tomlinson2-2/+2
This reverts commit 443d6e86f821a165fae3fc3fc13086d27ac140b1. This (and the following) patch basically re-implemented the RCU mechanisms of patch 784544739a25. That patch was replaced because of the performance problems that it created when replacing tables. Now, we have the same issue: the call to synchronize_rcu() makes replacing tables slower by as much as an order of magnitude. Revert these patches and fix the issue in a different way. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-27netfilter: nftables: add nft_parse_register_load() and use itPablo Neira Ayuso1-9/+9
This new function combines the netlink register attribute parser and the load validation function. This update requires to replace: enum nft_registers sreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘sreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-19netfilter: rpfilter: mask ecn bits before fib lookupGuillaume Nault1-1/+1
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17netfilter: x_tables: Update remaining dereference to RCUSubash Abhinov Kasiviswanathan2-2/+2
This fixes the dereference to fetch the RCU pointer when holding the appropriate xtables lock. Reported-by: kernel test robot <lkp@intel.com> Fixes: cc00bcaa5899 ("netfilter: x_tables: Switch synchronization to RCU") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski3-5/+7
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap. 2) Use atomic_inc_return() instead of atomic_add_return() in IPVS, from Yejune Deng. 3) Simplify check for overquota in xt_nfacct, from Kaixu Xia. 4) Move nfnl_acct_list away from struct net, from Miao Wang. 5) Pass actual sk in reject actions, from Jan Engelhardt. 6) Add timeout and protoinfo to ctnetlink destroy events, from Florian Westphal. 7) Four patches to generalize set infrastructure to support for multiple expressions per set element. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: netfilter: nftables: netlink support for several set element expressions netfilter: nftables: generalize set extension to support for several expressions netfilter: nftables: move nft_expr before nft_set netfilter: nftables: generalize set expressions support netfilter: ctnetlink: add timeout and protoinfo to destroy events netfilter: use actual socket sk for REJECT action netfilter: nfnl_acct: remove data from struct net netfilter: Remove unnecessary conversion to bool ipvs: replace atomic_add_return() netfilter: nft_reject_bridge: fix build errors due to code movement ==================== Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-14/+14
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08netfilter: x_tables: Switch synchronization to RCUSubash Abhinov Kasiviswanathan2-14/+14
When running concurrent iptables rules replacement with data, the per CPU sequence count is checked after the assignment of the new information. The sequence count is used to synchronize with the packet path without the use of any explicit locking. If there are any packets in the packet path using the table information, the sequence count is incremented to an odd value and is incremented to an even after the packet process completion. The new table value assignment is followed by a write memory barrier so every CPU should see the latest value. If the packet path has started with the old table information, the sequence counter will be odd and the iptables replacement will wait till the sequence count is even prior to freeing the old table info. However, this assumes that the new table information assignment and the memory barrier is actually executed prior to the counter check in the replacement thread. If CPU decides to execute the assignment later as there is no user of the table information prior to the sequence check, the packet path in another CPU may use the old table information. The replacement thread would then free the table information under it leading to a use after free in the packet processing context- Unable to handle kernel NULL pointer dereference at virtual address 000000000000008e pc : ip6t_do_table+0x5d0/0x89c lr : ip6t_do_table+0x5b8/0x89c ip6t_do_table+0x5d0/0x89c ip6table_filter_hook+0x24/0x30 nf_hook_slow+0x84/0x120 ip6_input+0x74/0xe0 ip6_rcv_finish+0x7c/0x128 ipv6_rcv+0xac/0xe4 __netif_receive_skb+0x84/0x17c process_backlog+0x15c/0x1b8 napi_poll+0x88/0x284 net_rx_action+0xbc/0x23c __do_softirq+0x20c/0x48c This could be fixed by forcing instruction order after the new table information assignment or by switching to RCU for the synchronization. Fixes: 80055dab5de0 ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore") Reported-by: Sean Tranchetti <stranche@codeaurora.org> Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-01netfilter: use actual socket sk for REJECT actionJan Engelhardt3-5/+7
True to the message of commit v5.10-rc1-105-g46d6c5ae953c, _do_ actually make use of state->sk when possible, such as in the REJECT modules. Reported-by: Minqiang Chen <ptpt52@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+2
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-01netfilter: nft_reject_inet: allow to use reject from inet ingressPablo Neira Ayuso1-2/+4
Enhance validation to support for reject from inet ingress chains. Note that, reject from inet ingress and netdev ingress differ. Reject packets from inet ingress are sent through ip_local_out() since inet reject emulates the IP layer receive path. So the reject packet follows to classic IP output and postrouting paths. The reject action from netdev ingress assumes the packet not yet entered the IP layer, so the reject packet is sent through dev_queue_xmit(). Therefore, reject packets from netdev ingress do not follow the classic IP output and postrouting paths. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-31netfilter: nf_reject: add reject skbuff creation helpersJose M. Guisado Gomez1-0/+122
Adds reject skbuff creation helper functions to ipv4/6 nf_reject infrastructure. Use these functions for reject verdict in bridge family. Can be reused by all different families that support reject and will not inject the reject packet through ip local out. Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-30netfilter: use actual socket sk rather than skb sk when routing harderJason A. Donenfeld2-2/+2
If netfilter changes the packet mark when mangling, the packet is rerouted using the route_me_harder set of functions. Prior to this commit, there's one big difference between route_me_harder and the ordinary initial routing functions, described in the comment above __ip_queue_xmit(): /* Note: skb->sk can be different from sk, in case of tunnels */ int __ip_queue_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, That function goes on to correctly make use of sk->sk_bound_dev_if, rather than skb->sk->sk_bound_dev_if. And indeed the comment is true: a tunnel will receive a packet in ndo_start_xmit with an initial skb->sk. It will make some transformations to that packet, and then it will send the encapsulated packet out of a *new* socket. That new socket will basically always have a different sk_bound_dev_if (otherwise there'd be a routing loop). So for the purposes of routing the encapsulated packet, the routing information as it pertains to the socket should come from that socket's sk, rather than the packet's original skb->sk. For that reason __ip_queue_xmit() and related functions all do the right thing. One might argue that all tunnels should just call skb_orphan(skb) before transmitting the encapsulated packet into the new socket. But tunnels do *not* do this -- and this is wisely avoided in skb_scrub_packet() too -- because features like TSQ rely on skb->destructor() being called when that buffer space is truely available again. Calling skb_orphan(skb) too early would result in buffers filling up unnecessarily and accounting info being all wrong. Instead, additional routing must take into account the new sk, just as __ip_queue_xmit() notes. So, this commit addresses the problem by fishing the correct sk out of state->sk -- it's already set properly in the call to nf_hook() in __ip_local_out(), which receives the sk as part of its normal functionality. So we make sure to plumb state->sk through the various route_me_harder functions, and then make correct use of it following the example of __ip_queue_xmit(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-14netfilter: nf_log: missing vlan offload tag and protoPablo Neira Ayuso2-4/+21
Dump vlan tag and proto for the usual vlan offload case if the NF_LOG_MACDECODE flag is set on. Without this information the logging is misleading as there is no reference to the VLAN header. [12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 [12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1 Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-28netfilter: delete repeated wordsRandy Dunlap1-1/+1
Drop duplicated words in net/netfilter/ and net/ipv4/netfilter/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds4-151/+81
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-07-28net: remove sockptr_advanceChristoph Hellwig2-8/+8
sockptr_advance never properly worked. Replace it with _offset variants of copy_from_sockptr and copy_to_sockptr. Fixes: ba423fdaa589 ("net: add a new sockptr_t type") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28netfilter: arp_tables: restore a SPDX identifierChristoph Hellwig1-1/+1
This was accidentally removed in an unrelated commit. Fixes: c2f12630c60f ("netfilter: switch nf_setsockopt to sockptr_t") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24netfilter: switch nf_setsockopt to sockptr_tChristoph Hellwig2-26/+26
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24netfilter: switch xt_copy_counters to sockptr_tChristoph Hellwig2-8/+6
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19netfilter: remove the compat argument to xt_copy_counters_from_userChristoph Hellwig2-4/+2
Lift the in_compat_syscall() from the callers instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19netfilter/ip_tables: clean up compat {get,set}sockopt handlingChristoph Hellwig1-65/+21
Merge the native and compat {get,set}sockopt handlers using in_compat_syscall(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19netfilter/arp_tables: clean up compat {get, set}sockopt handlingChristoph Hellwig1-64/+21
Merge the native and compat {get,set}sockopt handlers using in_compat_syscall(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-3/+3
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-0/+21
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for net-next: 1) Support for rejecting packets from the prerouting chain, from Laura Garcia Liebana. 2) Remove useless assignment in pipapo, from Stefano Brivio. 3) On demand hook registration in IPVS, from Julian Anastasov. 4) Expire IPVS connection from process context to not overload timers, also from Julian. 5) Fallback to conntrack TCP tracker to handle connection reuse in IPVS, from Julian Anastasov. 6) Several patches to support for chain bindings. 7) Expose enum nft_chain_flags through UAPI. 8) Reject unsupported chain flags from the netlink control plane. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06Replace HTTP links with HTTPS ones: IPv*Alexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30netfilter: introduce support for reject at prerouting stageLaura Garcia Liebana1-0/+21
REJECT statement can be only used in INPUT, FORWARD and OUTPUT chains. This patch adds support of REJECT, both icmp and tcp reset, at PREROUTING stage. The need for this patch comes from the requirement of some forwarding devices to reject traffic before the natting and routing decisions. The main use case is to be able to send a graceful termination to legitimate clients that, under any circumstances, the NATed endpoints are not available. This option allows clients to decide either to perform a reconnection or manage the error in their side, instead of just dropping the connection and let them die due to timeout. It is supported ipv4, ipv6 and inet families for nft infrastructure. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-25netfilter: iptables: Add a .pre_exit hook in all iptable_foo.c.David Wilder5-7/+44
Using new helpers ipt_unregister_table_pre_exit() and ipt_unregister_table_exit(). Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-25netfilter: iptables: Split ipt_unregister_table() into pre_exit and exit helpers.David Wilder1-1/+14
The pre_exit will un-register the underlying hook and .exit will do the table freeing. The netns core does an unconditional synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-25netfilter: Add MODULE_DESCRIPTION entries to kernel modulesRob Gill5-0/+5
The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules (descriptions taken from Kconfig file or code comments) Signed-off-by: Rob Gill <rrobgill@protonmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-8/+8
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-25netfilter: nf_conntrack_pptp: prevent buffer overflows in debug codePablo Neira Ayuso1-5/+2
Dan Carpenter says: "Smatch complains that the value for "cmd" comes from the network and can't be trusted." Add pptp_msg_name() helper function that checks for the array boundary. Fixes: f09943fefe6b ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-15netfilter: Replace zero-length array with flexible-array memberGustavo A. R. Silva2-4/+4
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix checkpatch.pl warning WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) in net/bridge/netfilter/ebtables.c This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-12inet: Use fallthrough;Joe Perches2-3/+3
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ And by hand: net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block that causes gcc to emit a warning if converted in-place. So move the new fallthrough; inside the containing #ifdef/#endif too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-8/+8
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-13netfilter: arp_tables: init netns pointer in xt_tgdtor_param structFlorian Westphal1-9/+10
An earlier commit (1b789577f655060d98d20e, "netfilter: arp_tables: init netns pointer in xt_tgchk_param struct") fixed missing net initialization for arptables, but turns out it was incomplete. We can get a very similar struct net NULL deref during error unwinding: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline] translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline] do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461 Also init the netns pointer in xt_tgdtor_param struct. Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-30netfilter: arp_tables: init netns pointer in xt_tgchk_param structFlorian Westphal1-11/+16
We get crash when the targets checkentry function tries to make use of the network namespace pointer for arptables. When the net pointer got added back in 2010, only ip/ip6/ebtables were changed to initialize it, so arptables has this set to NULL. This isn't a problem for normal arptables because no existing arptables target has a checkentry function that makes use of par->net. However, direct users of the setsockopt interface can provide any target they want as long as its registered for ARP or UNPSEC protocols. syzkaller managed to send a semi-valid arptables rule for RATEEST target which is enough to trigger NULL deref: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109 [..] xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019 check_target net/ipv4/netfilter/arp_tables.c:399 [inline] find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline] translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline] do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456 Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: syzbot+d7358a458d8a81aee898@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-15netfilter: nf_flow_table_offload: add IPv6 supportPablo Neira Ayuso1-1/+1
Add nf_flow_rule_route_ipv6() and use it from the IPv6 and the inet flowtable type definitions. Rename the nf_flow_rule_route() function to nf_flow_rule_route_ipv4(). Adjust maximum number of actions, which now becomes 16 to leave sufficient room for the IPv6 address mangling for NAT. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-12netfilter: nf_flow_table: hardware offload supportPablo Neira Ayuso1-0/+1
This patch adds the dataplane hardware offload to the flowtable infrastructure. Three new flags represent the hardware state of this flow: * FLOW_OFFLOAD_HW: This flow entry resides in the hardware. * FLOW_OFFLOAD_HW_DYING: This flow entry has been scheduled to be remove from hardware. This might be triggered by either packet path (via TCP RST/FIN packet) or via aging. * FLOW_OFFLOAD_HW_DEAD: This flow entry has been already removed from the hardware, the software garbage collector can remove it from the software flowtable. This patch supports for: * IPv4 only. * Aging via FLOW_CLS_STATS, no packet and byte counter synchronization at this stage. This patch also adds the action callback that specifies how to convert the flow entry into the flow_rule object that is passed to the driver. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12netfilter: nf_tables: add flowtable offload control planePablo Neira Ayuso1-0/+1
This patch adds the NFTA_FLOWTABLE_FLAGS attribute that allows users to specify the NF_FLOWTABLE_HW_OFFLOAD flag. This patch also adds a new setup interface for the flowtable type to perform the flowtable offload block callback configuration. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05icmp: remove duplicate codeMatteo Croce1-9/+1
The same code which recognizes ICMP error packets is duplicated several times. Use the icmp_is_err() and icmpv6_is_err() helpers instead, which do the same thing. ip_multipath_l3_keys() and tcf_nat_act() didn't check for all the error types, assume that they should instead. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01netfilter: drop bridge nf reset from nf_resetFlorian Westphal1-1/+1
commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-13netfilter: fix coding-style errors.Jeremy Sowden2-5/+5
Several header-files, Kconfig files and Makefiles have trailing white-space. Remove it. In netfilter/Kconfig, indent the type of CONFIG_NETFILTER_NETLINK_ACCT correctly. There are semicolons at the end of two function definitions in include/net/netfilter/nf_conntrack_acct.h and include/net/netfilter/nf_conntrack_ecache.h. Remove them. Fix indentation in nf_conntrack_l4proto.h. Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-03netfilter: synproxy: rename mss synproxy_options fieldFernando Fernandez Mancera1-2/+2
After introduce "mss_encode" field in the synproxy_options struct the field "mss" is a little confusing. It has been renamed to "mss_option". Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-16netfilter: synproxy: fix erroneous tcp mss optionFernando Fernandez Mancera1-0/+2
Now synproxy sends the mss value set by the user on client syn-ack packet instead of the mss value that client announced. Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-16netfilter: Update obsolete comments referring to ip_conntrackYonatan Goldschmidt1-2/+2
In 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") the new generic nf_conntrack was introduced, and it came to supersede the old ip_conntrack. This change updates (some) of the obsolete comments referring to old file/function names of the ip_conntrack mechanism, as well as removes a few self-referencing comments that we shouldn't maintain anymore. I did not update any comments referring to historical actions (e.g, comments like "this file was derived from ..." were left untouched, even if the referenced file is no longer here). Signed-off-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-16netfilter: nf_conntrack_sip: fix expectation clashxiao ruizhu1-6/+6
When conntracks change during a dialog, SDP messages may be sent from different conntracks to establish expects with identical tuples. In this case expects conflict may be detected for the 2nd SDP message and end up with a process failure. The fixing here is to reuse an existing expect who has the same tuple for a different conntrack if any. Here are two scenarios for the case. 1) SERVER CPE | INVITE SDP | 5060 |<----------------------|5060 | 100 Trying | 5060 |---------------------->|5060 | 183 SDP | 5060 |---------------------->|5060 ===> Conntrack 1 | PRACK | 50601 |<----------------------|5060 | 200 OK (PRACK) | 50601 |---------------------->|5060 | 200 OK (INVITE) | 5060 |---------------------->|5060 | ACK | 50601 |<----------------------|5060 | | |<--- RTP stream ------>| | | | INVITE SDP (t38) | 50601 |---------------------->|5060 ===> Conntrack 2 With a certain configuration in the CPE, SIP messages "183 with SDP" and "re-INVITE with SDP t38" will go through the sip helper to create expects for RTP and RTCP. It is okay to create RTP and RTCP expects for "183", whose master connection source port is 5060, and destination port is 5060. In the "183" message, port in Contact header changes to 50601 (from the original 5060). So the following requests e.g. PRACK and ACK are sent to port 50601. It is a different conntrack (let call Conntrack 2) from the original INVITE (let call Conntrack 1) due to the port difference. In this example, after the call is established, there is RTP stream but no RTCP stream for Conntrack 1, so the RTP expect created upon "183" is cleared, and RTCP expect created for Conntrack 1 retains. When "re-INVITE with SDP t38" arrives to create RTP&RTCP expects, current ALG implementation will call nf_ct_expect_related() for RTP and RTCP. The expects tuples are identical to those for Conntrack 1. RTP expect for Conntrack 2 succeeds in creation as the one for Conntrack 1 has been removed. RTCP expect for Conntrack 2 fails in creation because it has idential tuples and 'conflict' with the one retained for Conntrack 1. And then result in a failure in processing of the re-INVITE. 2) SERVER A CPE | REGISTER | 5060 |<------------------| 5060 ==> CT1 | 200 | 5060 |------------------>| 5060 | | | INVITE SDP(1) | 5060 |<------------------| 5060 | 300(multi choice) | 5060 |------------------>| 5060 SERVER B | ACK | 5060 |<------------------| 5060 | INVITE SDP(2) | 5060 |-------------------->| 5060 ==> CT2 | 100 | 5060 |<--------------------| 5060 | 200(contact changes)| 5060 |<--------------------| 5060 | ACK | 5060 |-------------------->| 50601 ==> CT3 | | |<--- RTP stream ---->| | | | BYE | 5060 |<--------------------| 50601 | 200 | 5060 |-------------------->| 50601 | INVITE SDP(3) | 5060 |<------------------| 5060 ==> CT1 CPE sends an INVITE request(1) to Server A, and creates a RTP&RTCP expect pair for this Conntrack 1 (CT1). Server A responds 300 to redirect to Server B. The RTP&RTCP expect pairs created on CT1 are removed upon 300 response. CPE sends the INVITE request(2) to Server B, and creates an expect pair for the new conntrack (due to destination address difference), let call CT2. Server B changes the port to 50601 in 200 OK response, and the following requests ACK and BYE from CPE are sent to 50601. The call is established. There is RTP stream and no RTCP stream. So RTP expect is removed and RTCP expect for CT2 retains. As BYE request is sent from port 50601, it is another conntrack, let call CT3, different from CT2 due to the port difference. So the BYE request will not remove the RTCP expect for CT2. Then another outgoing call is made, with the same RTP port being used (not definitely but possibly). CPE firstly sends the INVITE request(3) to Server A, and tries to create a RTP&RTCP expect pairs for this CT1. In current ALG implementation, the RTCP expect for CT1 fails in creation because it 'conflicts' with the residual one for CT2. As a result the INVITE request fails to send. Signed-off-by: xiao ruizhu <katrina.xiaorz@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-16netfilter: Fix rpfilter dropping vrf packets by mistakeMiaohe Lin1-0/+1
When firewalld is enabled with ipv4/ipv6 rpfilter, vrf ipv4/ipv6 packets will be dropped. Vrf device will pass through netfilter hook twice. One with enslaved device and another one with l3 master device. So in device may dismatch witch out device because out device is always enslaved device.So failed with the check of the rpfilter and drop the packets by mistake. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds7-398/+20
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.