aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/tcp_input.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-11tcp: rate limit synflood warnings furtherWillem de Bruijn1-2/+2
Convert pr_info to net_info_ratelimited to limit the total number of synflood warnings. Commit 946cedccbd73 ("tcp: Change possible SYN flooding messages") rate limits synflood warnings to one per listener. Workloads that open many listener sockets can still see a high rate of log messages. Syzkaller is one frequent example. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31tcp: change IPv6 flow-label upon receiving spurious retransmissionYuchung Cheng1-0/+13
Currently a Linux IPv6 TCP sender will change the flow label upon timeouts to potentially steer away from a data path that has gone bad. However this does not help if the problem is on the ACK path and the data path is healthy. In this case the receiver is likely to receive repeated spurious retransmission because the sender couldn't get the ACKs in time and has recurring timeouts. This patch adds another feature to mitigate this problem. It leverages the DSACK states in the receiver to change the flow label of the ACKs to speculatively re-route the ACK packets. In order to allow triggering on the second consecutive spurious RTO, the receiver changes the flow label upon sending a second consecutive DSACK for a sequence number below RCV.NXT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11tcp: avoid resetting ACK timer upon receiving packet with ECN CWR flagYuchung Cheng1-4/+4
Previously commit 9aee40006190 ("tcp: ack immediately when a cwr packet arrives") calls tcp_enter_quickack_mode to force sending two immediate ACKs upon receiving a packet w/ CWR flag. The side effect is it'll also reset the delayed ACK timer and interactive session tracking. This patch removes that side effect by using the new ACK_NOW flag to force an immmediate ACK. Packetdrill to demonstrate: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> +.1 < [ect0] . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 < [ect0] . 1:1001(1000) ack 1 win 257 +0 > [ect01] . 1:1(0) ack 1001 +0 write(4, ..., 1) = 1 +0 > [ect01] P. 1:2(1) ack 1001 +0 < [ect0] . 1001:2001(1000) ack 2 win 257 +0 write(4, ..., 1) = 1 +0 > [ect01] P. 2:3(1) ack 2001 +0 < [ect0] . 2001:3001(1000) ack 3 win 257 +0 < [ect0] . 3001:4001(1000) ack 3 win 257 // Ack delayed ... +.01 < [ce] P. 4001:4501(500) ack 3 win 257 +0 > [ect01] . 3:3(0) ack 4001 +0 > [ect01] E. 3:3(0) ack 4501 +.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 win 100 +.01 < [ect0] W. 4501:5501(1000) ack 4 win 257 // No delayed ACK on CWR flag +0 > [ect01] . 4:4(0) ack 5501 +.31 < [ect0] . 5501:6501(1000) ack 4 win 257 +0 > [ect01] . 4:4(0) ack 6501 Fixes: 9aee40006190 ("tcp: ack immediately when a cwr packet arrives") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11tcp: always ACK immediately on hole repairsYuchung Cheng1-2/+2
RFC 5681 sec 4.2: To provide feedback to senders recovering from losses, the receiver SHOULD send an immediate ACK when it receives a data segment that fills in all or part of a gap in the sequence space. When a gap is partially filled, __tcp_ack_snd_check already checks the out-of-order queue and correctly send an immediate ACK. However when a gap is fully filled, the previous implementation only resets pingpong mode which does not guarantee an immediate ACK because the quick ACK counter may be zero. This patch addresses this issue by marking the one-time immediate ACK flag instead. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11tcp: mandate a one-time immediate ACKYuchung Cheng1-1/+3
Add a new flag to indicate a one-time immediate ACK. This flag is occasionaly set under specific TCP protocol states in addition to the more common quickack mechanism for interactive application. In several cases in the TCP code we want to force an immediate ACK but do not want to call tcp_enter_quickack_mode() because we do not want to forget the icsk_ack.pingpong or icsk_ack.ato state. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+8
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01tcp: add stat of data packet reordering eventsWei Wang1-1/+2
Introduce a new TCP stats to record the number of reordering events seen and expose it in both tcp_info (TCP_INFO) and opt_stats (SOF_TIMESTAMPING_OPT_STATS). Application can use this stats to track the frequency of the reordering events in addition to the existing reordering stats which tracks the magnitude of the latest reordering event. Note: this new stats tracks reordering events triggered by ACKs, which could often be fewer than the actual number of packets being delivered out-of-order. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01tcp: add dsack blocks received statsWei Wang1-0/+1
Introduce a new TCP stat to record the number of DSACK blocks received (RFC4989 tcpEStatsStackDSACKDups) and expose it in both tcp_info (TCP_INFO) and opt_stats (SOF_TIMESTAMPING_OPT_STATS). Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25tcp: ack immediately when a cwr packet arrivesLawrence Brakmo1-1/+8
We observed high 99 and 99.9% latencies when doing RPCs with DCTCP. The problem is triggered when the last packet of a request arrives CE marked. The reply will carry the ECE mark causing TCP to shrink its cwnd to 1 (because there are no packets in flight). When the 1st packet of the next request arrives, the ACK was sometimes delayed even though it is CWR marked, adding up to 40ms to the RPC latency. This patch insures that CWR marked data packets arriving will be acked immediately. Packetdrill script to reproduce the problem: 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Modified based on comments by Neal Cardwell <ncardwell@google.com> Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-13/+52
2018-07-23tcp: add tcp_ooo_try_coalesce() helperEric Dumazet1-4/+21
In case skb in out_or_order_queue is the result of multiple skbs coalescing, we would like to get a proper gso_segs counter tracking, so that future tcp_drop() can report an accurate number. I chose to not implement this tracking for skbs in receive queue, since they are not dropped, unless socket is disconnected. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23tcp: call tcp_drop() from tcp_data_queue_ofo()Eric Dumazet1-2/+2
In order to be able to give better diagnostics and detect malicious traffic, we need to have better sk->sk_drops tracking. Fixes: 9f5afeae5152 ("tcp: use an RB tree for ooo receive queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23tcp: detect malicious patterns in tcp_collapse_ofo_queue()Eric Dumazet1-2/+13
In case an attacker feeds tiny packets completely out of order, tcp_collapse_ofo_queue() might scan the whole rb-tree, performing expensive copies, but not changing socket memory usage at all. 1) Do not attempt to collapse tiny skbs. 2) Add logic to exit early when too many tiny skbs are detected. We prefer not doing aggressive collapsing (which copies packets) for pathological flows, and revert to tcp_prune_ofo_queue() which will be less expensive. In the future, we might add the possibility of terminating flows that are proven to be malicious. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23tcp: avoid collapses in tcp_prune_queue() if possibleEric Dumazet1-0/+3
Right after a TCP flow is created, receiving tiny out of order packets allways hit the condition : if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) tcp_clamp_window(sk); tcp_clamp_window() increases sk_rcvbuf to match sk_rmem_alloc (guarded by tcp_rmem[2]) Calling tcp_collapse_ofo_queue() in this case is not useful, and offers a O(N^2) surface attack to malicious peers. Better not attempt anything before full queue capacity is reached, forcing attacker to spend lots of resource and allow us to more easily detect the abuse. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23tcp: free batches of packets in tcp_prune_ofo_queue()Eric Dumazet1-4/+11
Juha-Matti Tilli reported that malicious peers could inject tiny packets in out_of_order_queue, forcing very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet. out_of_order_queue rb-tree can contain thousands of nodes, iterating over all of them is not nice. Before linux-4.9, we would have pruned all packets in ofo_queue in one go, every XXXX packets. XXXX depends on sk_rcvbuf and skbs truesize, but is about 7000 packets with tcp_rmem[2] default of 6 MB. Since we plan to increase tcp_rmem[2] in the future to cope with modern BDP, can not revert to the old behavior, without great pain. Strategy taken in this patch is to purge ~12.5 % of the queue capacity. Fixes: 36a6503fedda ("tcp: refine tcp_prune_ofo_queue() to not drop all packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20tcp: do not delay ACK in DCTCP upon CE status changeYuchung Cheng1-1/+2
Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change has to be sent immediately so the sender can respond quickly: """ When receiving packets, the CE codepoint MUST be processed as follows: 1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to true and send an immediate ACK. 2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE to false and send an immediate ACK. """ Previously DCTCP implementation may continue to delay the ACK. This patch fixes that to implement the RFC by forcing an immediate ACK. Tested with this packetdrill script provided by Larry Brakmo 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 +0.005 < [ce] . 2001:3001(1000) ack 2 win 257 +0.000 > [ect01] . 2:2(0) ack 2001 // Previously the ACK below would be delayed by 40ms +0.000 > [ect01] E. 2:2(0) ack 3001 +0.500 < F. 9501:9501(0) ack 4 win 257 Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tcp: Don't coalesce decrypted and encrypted SKBsBoris Pismenny1-0/+12
Prevent coalescing of decrypted and encrypted SKBs in GRO and TCP layer. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-14tcp: remove redundant rcv_nxt updateYafang Shao1-1/+0
tcp_rcv_nxt_update() is already executed in tcp_data_queue(). This line is redundant. See bellow, tcp_queue_rcv tcp_rcv_nxt_update(tcp_sk(sk), TCP_SKB_CB(skb)->end_seq); tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq); <<<< redundant Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12tcp: use monotonic timestamps for PAWSArnd Bergmann1-1/+1
Using get_seconds() for timestamps is deprecated since it can lead to overflows on 32-bit systems. While the interface generally doesn't overflow until year 2106, the specific implementation of the TCP PAWS algorithm breaks in 2038 when the intermediate signed 32-bit timestamps overflow. A related problem is that the local timestamps in CLOCK_REALTIME form lead to unexpected behavior when settimeofday is called to set the system clock backwards or forwards by more than 24 days. While the first problem could be solved by using an overflow-safe method of comparing the timestamps, a nicer solution is to use a monotonic clocksource with ktime_get_seconds() that simply doesn't overflow (at least not until 136 years after boot) and that doesn't change during settimeofday(). To make 32-bit and 64-bit architectures behave the same way here, and also save a few bytes in the tcp_options_received structure, I'm changing the type to a 32-bit integer, which is now safe on all architectures. Finally, the ts_recent_stamp field also (confusingly) gets used to store a jiffies value in tcp_synq_overflow()/tcp_synq_no_recent_overflow(). This is currently safe, but changing the type to 32-bit requires some small changes there to keep it working. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+11
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: Record receive queue number for a connectionAmritha Nambiar1-0/+3
This patch adds a new field to sock_common 'skc_rx_queue_mapping' which holds the receive queue number for the connection. The Rx queue is marked in tcp_finish_connect() to allow a client app to do SO_INCOMING_NAPI_ID after a connect() call to get the right queue association for a socket. Rx queue is also marked in tcp_conn_request() to allow syn-ack to go on the right tx-queue associated with the queue on which syn is received. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-01tcp: prevent bogus FRTO undos with non-SACK flowsIlpo Järvinen1-0/+9
If SACK is not enabled and the first cumulative ACK after the RTO retransmission covers more than the retransmitted skb, a spurious FRTO undo will trigger (assuming FRTO is enabled for that RTO). The reason is that any non-retransmitted segment acknowledged will set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is no indication that it would have been delivered for real (the scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK case so the check for that bit won't help like it does with SACK). Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo in tcp_process_loss. We need to use more strict condition for non-SACK case and check that none of the cumulatively ACKed segments were retransmitted to prove that progress is due to original transmissions. Only then keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in non-SACK case. (FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS to better indicate its purpose but to keep this change minimal, it will be done in another patch). Besides burstiness and congestion control violations, this problem can result in RTO loop: When the loss recovery is prematurely undoed, only new data will be transmitted (if available) and the next retransmission can occur only after a new RTO which in case of multiple losses (that are not for consecutive packets) requires one RTO per loss to recover. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30tcp: add new SNMP counter for drops when try to queue in rcv queueYafang Shao1-2/+6
When sk_rmem_alloc is larger than the receive buffer and we can't schedule more memory for it, the skb will be dropped. In above situation, if this skb is put into the ofo queue, LINUX_MIB_TCPOFODROP is incremented to track it. While if this skb is put into the receive queue, there's no record. So a new SNMP counter is introduced to track this behavior. LINUX_MIB_TCPRCVQDROP: Number of packets meant to be queued in rcv queue but dropped because socket rcvbuf limit hit. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28tcp: add one more quick ack after after ECN eventsEric Dumazet1-2/+2
Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea5fdd ("tcp: do not aggressively quick ack after ECN events") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Neal Cardwell <ncardwell@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26tcp: add SNMP counter for zero-window dropsYafang Shao1-2/+6
It will be helpful if we could display the drops due to zero window or no enough window space. So a new SNMP MIB entry is added to track this behavior. This entry is named LINUX_MIB_TCPZEROWINDOWDROP and published in /proc/net/netstat in TcpExt line as TCPZeroWindowDrop. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22tcp: ignore rcv_rtt sample with old ts ecr valueWei Wang1-3/+11
When receiving multiple packets with the same ts ecr value, only try to compute rcv_rtt sample with the earliest received packet. This is because the rcv_rtt calculated by later received packets could possibly include long idle time or other types of delay. For example: (1) server sends last packet of reply with TS val V1 (2) client ACKs last packet of reply with TS ecr V1 (3) long idle time passes (4) client sends next request data packet with TS ecr V1 (again!) At this time, the rcv_rtt computed on server with TS ecr V1 will be inflated with the idle time and should get ignored. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05tcp: refactor tcp_ecn_check_ce to remove sk type castYousuk Seung1-12/+14
Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock* instead of tcp_sock* to clean up type casts. This is a pure refactor patch. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31tcp: minor optimization around tcp_hdr() usage in receive pathYafang Shao1-3/+3
This is additional to the commit ea1627c20c34 ("tcp: minor optimizations around tcp_hdr() usage"). At this point, skb->data is same with tcp_hdr() as tcp header has not been pulled yet. So use the less expensive one to get the tcp header. Remove the third parameter of tcp_rcv_established() and put it into the function body. Furthermore, the local variables are listed as a reverse christmas tree :) Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22tcp: do not aggressively quick ack after ECN eventsEric Dumazet1-2/+2
ECN signals currently forces TCP to enter quickack mode for up to 16 (TCP_MAX_QUICKACKS) following incoming packets. We believe this is not needed, and only sending one immediate ack for the current packet should be enough. This should reduce the extra load noticed in DCTCP environments, after congestion events. This is part 2 of our effort to reduce pure ACK packets. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22tcp: add max_quickacks param to tcp_incr_quickack and tcp_enter_quickack_modeEric Dumazet1-11/+13
We want to add finer control of the number of ACK packets sent after ECN events. This patch is not changing current behavior, it only enables following change. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18tcp: add tcp_comp_sack_nr sysctlEric Dumazet1-1/+2
This per netns sysctl allows for TCP SACK compression fine-tuning. This limits number of SACK that can be compressed. Using 0 disables SACK compression. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18tcp: add tcp_comp_sack_delay_ns sysctlEric Dumazet1-2/+2
This per netns sysctl allows for TCP SACK compression fine-tuning. Its default value is 1,000,000, or 1 ms to meet TSO autosizing period. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18tcp: add SACK compressionEric Dumazet1-6/+29
When TCP receives an out-of-order packet, it immediately sends a SACK packet, generating network load but also forcing the receiver to send 1-MSS pathological packets, increasing its RTX queue length/depth, and thus processing time. Wifi networks suffer from this aggressive behavior, but generally speaking, all these SACK packets add fuel to the fire when networks are under congestion. This patch adds a high resolution timer and tp->compressed_ack counter. Instead of sending a SACK, we program this timer with a small delay, based on RTT and capped to 1 ms : delay = min ( 5 % of RTT, 1 ms) If subsequent SACKs need to be sent while the timer has not yet expired, we simply increment tp->compressed_ack. When timer expires, a SACK is sent with the latest information. Whenever an ACK is sent (if data is sent, or if in-order data is received) timer is canceled. Note that tcp_sack_new_ofo_skb() is able to force a SACK to be sent if the sack blocks need to be shuffled, even if the timer has not expired. A new SNMP counter is added in the following patch. Two other patches add sysctls to allow changing the 1,000,000 and 44 values that this commit hard-coded. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18tcp: do not force quickack when receiving out-of-order packetsEric Dumazet1-2/+0
As explained in commit 9f9843a751d0 ("tcp: properly handle stretch acks in slow start"), TCP stacks have to consider how many packets are acknowledged in one single ACK, because of GRO, but also because of ACK compression or losses. We plan to add SACK compression in the following patch, we must therefore not call tcp_enter_quickack_mode() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: don't mark recently sent packets lost on RTOYuchung Cheng1-4/+8
An RTO event indicates the head has not been acked for a long time after its last (re)transmission. But the other packets are not necessarily lost if they have been only sent recently (for example due to application limit). This patch would prohibit marking packets sent within an RTT to be lost on RTO event, using similar logic in TCP RACK detection. Normally the head (SND.UNA) would be marked lost since RTO should fire strictly after the head was sent. An exception is when the most recent RACK RTT measurement is larger than the (previous) RTO. To address this exception the head is always marked lost. Congestion control interaction: since we may not mark every packet lost, the congestion window may be more than 1 (inflight plus 1). But only one packet will be retransmitted after RTO, since tcp_retransmit_timer() calls tcp_retransmit_skb(...,segs=1). The connection still performs slow start from one packet (with Cubic congestion control). This commit was tested in an A/B test with Google web servers, and showed a reduction of 2% in (spurious) retransmits post timeout (SlowStartRetrans), and correspondingly reduced DSACKs (DSACKIgnoredOld) by 7%. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: new helper tcp_rack_skb_timeoutYuchung Cheng1-5/+5
Create and export a new helper tcp_rack_skb_timeout and move tcp_is_rack to prepare the final RTO change. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: separate loss marking and state update on RTOYuchung Cheng1-2/+2
Previously when TCP times out, it first updates cwnd and ssthresh, marks packets lost, and then updates congestion state again. This was fine because everything not yet delivered is marked lost, so the inflight is always 0 and cwnd can be safely set to 1 to retransmit one packet on timeout. But the inflight may not always be 0 on timeout if TCP changes to mark packets lost based on packet sent time. Therefore we must first mark the packet lost, then set the cwnd based on the (updated) inflight. This is not a pure refactor. Congestion control may potentially break if it uses (not yet updated) inflight to compute ssthresh. Fortunately all existing congestion control modules does not do that. Also it changes the inflight when CA_LOSS_EVENT is called, and only westwood processes such an event but does not use inflight. This change has two other minor side benefits: 1) consistent with Fast Recovery s.t. the inflight is updated first before tcp_enter_recovery flips state to CA_Recovery. 2) avoid intertwining loss marking with state update, making the code more readable. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: new helper tcp_timeout_mark_lostYuchung Cheng1-21/+29
Refactor using a new helper, tcp_timeout_mark_loss(), that marks packets lost upon RTO. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: account lost retransmit after timeoutYuchung Cheng1-15/+3
The previous approach for the lost and retransmit bits was to wipe the slate clean: zero all the lost and retransmit bits, correspondingly zero the lost_out and retrans_out counters, and then add back the lost bits (and correspondingly increment lost_out). The new approach is to treat this very much like marking packets lost in fast recovery. We don’t wipe the slate clean. We just say that for all packets that were not yet marked sacked or lost, we now mark them as lost in exactly the same way we do for fast recovery. This fixes the lost retransmit accounting at RTO time and greatly simplifies the RTO code by sharing much of the logic with Fast Recovery. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: simpler NewReno implementationYuchung Cheng1-8/+11
This is a rewrite of NewReno loss recovery implementation that is simpler and standalone for readability and better performance by using less states. Note that NewReno refers to RFC6582 as a modification to the fast recovery algorithm. It is used only if the connection does not support SACK in Linux. It should not to be confused with the Reno (AIMD) congestion control. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17tcp: disable RFC6675 loss detectionYuchung Cheng1-4/+8
This patch disables RFC6675 loss detection and make sysctl net.ipv4.tcp_recovery = 1 controls a binary choice between RACK (1) or RFC6675 (0). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-01tcp: Add clean acked data hookIlya Lesokhin1-0/+25
Called when a TCP segment is acknowledged. Could be used by application protocols who hold additional metadata associated with the stream data. This is required by TLS device offload to release metadata associated with acknowledged TLS records. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+2
2018-04-24Revert "net: init sk_cookie for inet socket"Yafang Shao1-7/+1
This reverts commit <c6849a3ac17e> ("net: init sk_cookie for inet socket") Per discussion with Eric, when update sock_net(sk)->cookie_gen, the whole cache cache line will be invalidated, as this cache line is shared with all cpus, that may cause great performace hit. Bellow is the data form Eric. "Performance is reduced from ~5 Mpps to ~3.8 Mpps with 16 RX queues on my host" when running synflood test. Have to revert it to prevent from cache line false sharing. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net: init sk_cookie for inet socketYafang Shao1-1/+7
With sk_cookie we can identify a socket, that is very helpful for traceing and statistic, i.e. tcp tracepiont and ebpf. So we'd better init it by default for inet socket. When using it, we just need call atomic64_read(&sk->sk_cookie). Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net: introduce a new tracepoint for tcp_rcv_space_adjustYafang Shao1-0/+2
tcp_rcv_space_adjust is called every time data is copied to user space, introducing a tcp tracepoint for which could show us when the packet is copied to user. When a tcp packet arrives, tcp_rcv_established() will be called and with the existed tracepoint tcp_probe we could get the time when this packet arrives. Then this packet will be copied to user, and tcp_rcv_space_adjust will be called and with this new introduced tracepoint we could get the time when this packet is copied to user. With these two tracepoints, we could figure out whether the user program processes this packet immediately or there's latency. Hence in the printk message, sk_cookie is printed as a key to relate tcp_rcv_space_adjust with tcp_probe. Maybe we could export sockfd in this new tracepoint as well, then we could relate this new tracepoint with epoll/read/recv* tracepoints, and finally that could show us the whole lifespan of this packet. But we could also implement that with pid as these functions are executed in process context. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23tcp: don't read out-of-bounds opsizeJann Horn1-5/+2
The old code reads the "opsize" variable from out-of-bounds memory (first byte behind the segment) if a broken TCP segment ends directly after an opcode that is neither EOL nor NOP. The result of the read isn't used for anything, so the worst thing that could theoretically happen is a pagefault; and since the physmap is usually mostly contiguous, even that seems pretty unlikely. The following C reproducer triggers the uninitialized read - however, you can't actually see anything happen unless you put something like a pr_warn() in tcp_parse_md5sig_option() to print the opsize. ==================================== #define _GNU_SOURCE #include <arpa/inet.h> #include <stdlib.h> #include <errno.h> #include <stdarg.h> #include <net/if.h> #include <linux/if.h> #include <linux/ip.h> #include <linux/tcp.h> #include <linux/in.h> #include <linux/if_tun.h> #include <err.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <string.h> #include <stdio.h> #include <unistd.h> #include <sys/ioctl.h> #include <assert.h> void systemf(const char *command, ...) { char *full_command; va_list ap; va_start(ap, command); if (vasprintf(&full_command, command, ap) == -1) err(1, "vasprintf"); va_end(ap); printf("systemf: <<<%s>>>\n", full_command); system(full_command); } char *devname; int tun_alloc(char *name) { int fd = open("/dev/net/tun", O_RDWR); if (fd == -1) err(1, "open tun dev"); static struct ifreq req = { .ifr_flags = IFF_TUN|IFF_NO_PI }; strcpy(req.ifr_name, name); if (ioctl(fd, TUNSETIFF, &req)) err(1, "TUNSETIFF"); devname = req.ifr_name; printf("device name: %s\n", devname); return fd; } #define IPADDR(a,b,c,d) (((a)<<0)+((b)<<8)+((c)<<16)+((d)<<24)) void sum_accumulate(unsigned int *sum, void *data, int len) { assert((len&2)==0); for (int i=0; i<len/2; i++) { *sum += ntohs(((unsigned short *)data)[i]); } } unsigned short sum_final(unsigned int sum) { sum = (sum >> 16) + (sum & 0xffff); sum = (sum >> 16) + (sum & 0xffff); return htons(~sum); } void fix_ip_sum(struct iphdr *ip) { unsigned int sum = 0; sum_accumulate(&sum, ip, sizeof(*ip)); ip->check = sum_final(sum); } void fix_tcp_sum(struct iphdr *ip, struct tcphdr *tcp) { unsigned int sum = 0; struct { unsigned int saddr; unsigned int daddr; unsigned char pad; unsigned char proto_num; unsigned short tcp_len; } fakehdr = { .saddr = ip->saddr, .daddr = ip->daddr, .proto_num = ip->protocol, .tcp_len = htons(ntohs(ip->tot_len) - ip->ihl*4) }; sum_accumulate(&sum, &fakehdr, sizeof(fakehdr)); sum_accumulate(&sum, tcp, tcp->doff*4); tcp->check = sum_final(sum); } int main(void) { int tun_fd = tun_alloc("inject_dev%d"); systemf("ip link set %s up", devname); systemf("ip addr add 192.168.42.1/24 dev %s", devname); struct { struct iphdr ip; struct tcphdr tcp; unsigned char tcp_opts[20]; } __attribute__((packed)) syn_packet = { .ip = { .ihl = sizeof(struct iphdr)/4, .version = 4, .tot_len = htons(sizeof(syn_packet)), .ttl = 30, .protocol = IPPROTO_TCP, /* FIXUP check */ .saddr = IPADDR(192,168,42,2), .daddr = IPADDR(192,168,42,1) }, .tcp = { .source = htons(1), .dest = htons(1337), .seq = 0x12345678, .doff = (sizeof(syn_packet.tcp)+sizeof(syn_packet.tcp_opts))/4, .syn = 1, .window = htons(64), .check = 0 /*FIXUP*/ }, .tcp_opts = { /* INVALID: trailing MD5SIG opcode after NOPs */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 19 } }; fix_ip_sum(&syn_packet.ip); fix_tcp_sum(&syn_packet.ip, &syn_packet.tcp); while (1) { int write_res = write(tun_fd, &syn_packet, sizeof(syn_packet)); if (write_res != sizeof(syn_packet)) err(1, "packet write failed"); } } ==================================== Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19tcp: export packets delivery infoYuchung Cheng1-1/+5
Export data delivered and delivered with CE marks to 1) SNMP TCPDelivered and TCPDeliveredCE 2) getsockopt(TCP_INFO) 3) Timestamping API SOF_TIMESTAMPING_OPT_STATS Note that for SCM_TSTAMP_ACK, the delivery info in SOF_TIMESTAMPING_OPT_STATS is reported before the info was fully updated on the ACK. These stats help application monitor TCP delivery and ECN status on per host, per connection, even per message level. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19tcp: track total bytes delivered with ECN CE marksYuchung Cheng1-0/+2
Introduce a new delivered_ce stat in tcp socket to estimate number of packets being marked with CE bits. The estimation is done via ACKs with ECE bit. Depending on the actual receiver behavior, the estimation could have biases. Since the TCP sender can't really see the CE bit in the data path, so the sender is technically counting packets marked delivered with the "ECE / ECN-Echo" flag set. With RFC3168 ECN, because the ECE bit is sticky, this count can drastically overestimate the nummber of CE-marked data packets With DCTCP-style ECN this should be reasonably precise unless there is loss in the ACK path, in which case it's not precise. With AccECN proposal this can be made still more precise, even in the case some degree of ACK loss. However this is sender's best estimate of CE information. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19tcp: new helper to calculate newly deliveredYuchung Cheng1-2/+15
Add new helper tcp_newly_delivered() to prepare the ECN accounting change. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>