aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/udp_tunnel.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-02vxlan: Fix alignment and code style of vxlan.cNiu Xilei1-10/+11
Fixed Coding function and style issues Signed-off-by: Niu Xilei <niu_xilei@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02selftests: mlxsw: Add a self-test for port-default priorityPetr Machata2-0/+199
Send non-IP traffic to a port and observe that it gets prioritized according to the lldptool app=$prio,1,0 rules. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02mlxsw: spectrum_dcb: Allow setting default port priorityPetr Machata1-0/+17
When APP TLV selector 1 (EtherType) is used with PID of 0, the corresponding entry specifies "default application priority [...] when application priority is not otherwise specified." mlxsw currently supports this type of APP entry, but uses it only as a fallback for unspecified DSCP rules. However non-IP traffic is prioritized according to port-default priority, not according to the DSCP-to-prio tables, and thus it's currently not possible to prioritize such traffic correctly. Extend the use of the abovementioned APP entry to also set default port priority. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02mlxsw: reg: Add QoS Port DSCP to Priority Mapping RegisterPetr Machata1-0/+33
Add QPDP. This register controls the port default Switch Priority and Color. The default Switch Priority and Color are used for frames where the trust state uses default values. Currently there are two cases where this applies: a port is in trust-PCP state, but a packet arrives untagged; and a port is in trust-DSCP state, but a non-IP packet arrives. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02page_pool: help compiler remove code in case CONFIG_NUMA=nJesper Dangaard Brouer1-0/+9
When kernel is compiled without NUMA support, then page_pool NUMA config setting (pool->p.nid) doesn't make any practical sense. The compiler cannot see that it can remove the code paths. This patch avoids reading pool->p.nid setting in case of !CONFIG_NUMA, in allocation and numa check code, which helps compiler to see the optimisation potential. It leaves update code intact to keep API the same. $ ./scripts/bloat-o-meter net/core/page_pool.o-numa-enabled \ net/core/page_pool.o-numa-disabled add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-113 (-113) Function old new delta page_pool_create 401 398 -3 __page_pool_alloc_pages_slow 439 426 -13 page_pool_refill_alloc_cache 425 328 -97 Total: Before=3611, After=3498, chg -3.13% Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02page_pool: handle page recycle for NUMA_NO_NODE conditionJesper Dangaard Brouer1-19/+61
The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31igc: Remove serdes comments from a description of methodsSasha Neftin1-2/+2
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31e1000e: Use netdev_info instead of pr_info for link messagesAlexander Duyck1-8/+9
Replace the pr_info calls with netdev_info in all cases related to the netdevice link state. As a result of this patch the link messages will change as shown below. Before: e1000e: ens3 NIC Link is Down e1000e: ens3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx After: e1000e 0000:00:03.0 ens3: NIC Link is Down e1000e 0000:00:03.0 ens3: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add legacy power management supportSasha Neftin4-0/+246
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add 64 bit DMA access supportSasha Neftin1-0/+3
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix parameter descriptions for a several functionsSasha Neftin1-3/+7
igc_watchdog, igc_set_interrupt_capability, igc_init_interrupt_scheme, __igc_open and __igc_close parameter descriptions has not reflected functions meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix the parameter description for igc_alloc_rx_buffersSasha Neftin1-1/+2
The function description for igc_alloc_rx_buffers has not reflected the function meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Remove excess parameter description from igc_is_non_eopSasha Neftin1-1/+0
The function description for igc_is_non_eop includes an extra @skb parameter description. This parameter doesn't exist on the function, so remove it. Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Prefer to use the pci_release_mem_regions methodSasha Neftin1-2/+1
Use the pci_release_mem_regions method instead of the pci_release_selected_regions method Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Improve the DMA mapping flowSasha Neftin1-15/+9
Improve the probe flow and set both the DMA mask and the coherent to the same thing. Make the flow optimized and cleared. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add scatter gather supportSasha Neftin1-0/+1
Scatter gather is used to do DMA data transfers of data that is written to noncontiguous areas of memory. This patch enables scatter gather support. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igb: dont drop packets if rx flow control is enabledRobert Beckett3-14/+42
If Rx flow control has been enabled (via autoneg or forced), packets should not be dropped due to Rx descriptor ring exhaustion. Instead pause frames should be used to apply back pressure. This only applies if VFs are not in use. Move SRRCTL setup to its own function for easy reuse and only set drop enable bit if Rx flow control is not enabled. Since v1: always enable dropping of packets if VFs in use. Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-30hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()Taehee Yoo1-1/+2
hsr slave interfaces don't have debugfs directory. So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name is changed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link set dummy0 name ap Splat looks like: [21071.899367][T22666] ap: renamed from dummy0 [21071.914005][T22666] ================================================================== [21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666 [21071.926941][T22666] [21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240 [21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [21071.935094][T22666] Call Trace: [21071.935867][T22666] dump_stack+0x96/0xdb [21071.936687][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.937774][T22666] print_address_description.constprop.5+0x1be/0x360 [21071.939019][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940081][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940949][T22666] __kasan_report+0x12a/0x16f [21071.941758][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.942674][T22666] kasan_report+0xe/0x20 [21071.943325][T22666] hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.944187][T22666] hsr_netdev_notify+0x1fe/0x9b0 [hsr] [21071.945052][T22666] ? __module_text_address+0x13/0x140 [21071.945897][T22666] notifier_call_chain+0x90/0x160 [21071.946743][T22666] dev_change_name+0x419/0x840 [21071.947496][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.948600][T22666] ? netdev_adjacent_rename_links+0x280/0x280 [21071.949577][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.950672][T22666] ? lock_downgrade+0x6e0/0x6e0 [21071.951345][T22666] ? do_setlink+0x811/0x2ef0 [21071.951991][T22666] do_setlink+0x811/0x2ef0 [21071.952613][T22666] ? is_bpf_text_address+0x81/0xe0 [ ... ] Reported-by: syzbot+9328206518f08318a5fd@syzkaller.appspotmail.com Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net/sched: add delete_empty() to filters and use it in cls_flowerDavide Caratti4-51/+22
Revert "net/sched: cls_u32: fix refcount leak in the error path of u32_change()", and fix the u32 refcount leak in a more generic way that preserves the semantic of rule dumping. On tc filters that don't support lockless insertion/removal, there is no need to guard against concurrent insertion when a removal is in progress. Therefore, for most of them we can avoid a full walk() when deleting, and just decrease the refcount, like it was done on older Linux kernels. This fixes situations where walk() was wrongly detecting a non-empty filter, like it happened with cls_u32 in the error path of change(), thus leading to failures in the following tdc selftests: 6aa7: (filter, u32) Add/Replace u32 with source match and invalid indev 6658: (filter, u32) Add/Replace u32 with custom hash table and invalid handle 74c2: (filter, u32) Add/Replace u32 filter with invalid hash table id On cls_flower, and on (future) lockless filters, this check is necessary: move all the check_empty() logic in a callback so that each filter can have its own implementation. For cls_flower, it's sufficient to check if no IDRs have been allocated. This reverts commit 275c44aa194b7159d1191817b20e076f55f0e620. Changes since v1: - document the need for delete_empty() when TCF_PROTO_OPS_DOIT_UNLOCKED is used, thanks to Vlad Buslov - implement delete_empty() without doing fl_walk(), thanks to Vlad Buslov - squash revert and new fix in a single patch, to be nice with bisect tests that run tdc on u32 filter, thanks to Dave Miller Fixes: 275c44aa194b ("net/sched: cls_u32: fix refcount leak in the error path of u32_change()") Fixes: 6676d5e416ee ("net: sched: set dedicated tcf_walker flag when tp is empty") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net/ncsi: Fix gma flag setting after responseVijay Khemka2-3/+6
gma_flag was set at the time of GMA command request but it should only be set after getting successful response. Movinng this flag setting in GMA response handler. This flag is used mainly for not repeating GMA command once received MAC address. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30sctp: add enabled check for path tracepoint loop.Kevin Kou1-2/+3
sctp_outq_sack is the main function handles SACK, it is called very frequently. As the commit "move trace_sctp_probe_path into sctp_outq_sack" added below code to this function, sctp tracepoint is disabled most of time, but the loop of transport list will be always called even though the tracepoint is disabled, this is unnecessary. + /* SCTP path tracepoint for congestion control debugging. */ + list_for_each_entry(transport, transport_list, transports) { + trace_sctp_probe_path(transport, asoc); + } This patch is to add tracepoint enabled check at outside of the loop of transport list, and avoid traversing the loop when trace is disabled, it is a small optimization. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Empty the RX timestamping queue on PTP settings changeVladimir Oltean1-0/+3
When disabling PTP timestamping, don't reset the switch with the new static config until all existing PTP frames have been timestamped on the RX path or dropped. There's nothing we can do with these afterwards. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Use PTP core's dedicated kernel thread for RX timestampingVladimir Oltean3-20/+16
And move the queue of skb's waiting for RX timestamps into the ptp_data structure, since it isn't needed if PTP is not compiled. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: introduce ptp_cancel_worker_syncVladimir Oltean2-0/+15
In order to effectively use the PTP kernel thread for tasks such as timestamping packets, allow the user control over stopping it, which is needed e.g. when the timestamping queues must be drained. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30tcp: Fix highest_sack and highest_sack_seqCambda Zhu1-0/+3
>From commit 50895b9de1d3 ("tcp: highest_sack fix"), the logic about setting tp->highest_sack to the head of the send queue was removed. Of course the logic is error prone, but it is logical. Before we remove the pointer to the highest sack skb and use the seq instead, we need to set tp->highest_sack to NULL when there is no skb after the last sack, and then replace NULL with the real skb when new skb inserted into the rtx queue, because the NULL means the highest sack seq is tp->snd_nxt. If tp->highest_sack is NULL and new data sent, the next ACK with sack option will increase tp->reordering unexpectedly. This patch sets tp->highest_sack to the tail of the rtx queue if it's NULL and new data is sent. The patch keeps the rule that the highest_sack can only be maintained by sack processing, except for this only case. Fixes: 50895b9de1d3 ("tcp: highest_sack fix") Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: fix the race between the release of ptp_clock and cdevVladis Dronov4-44/+39
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/SVladimir Oltean2-6/+9
For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30Documentation: net: dsa: sja1105: Remove text about taprio base-time limitationVladimir Oltean1-6/+0
Since commit 86db36a347b4 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source"), this paragraph is no longer true. So remove it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Remove restriction of zero base-time for taprio offloadVladimir Oltean1-5/+0
The check originates from the initial implementation which was not based on PTP time but on a standalone clock source. In the meantime we can now program the PTPSCHTM register at runtime with the dynamic base time (actually with a value that is 200 ns smaller, to avoid writing DELTA=0 in the Schedule Entry Points Parameters Table). And we also have logic for moving the actual base time in the future of the PHC's current time base, so the check for zero serves no purpose, since even if the user will specify zero, that's not what will end up in the static config table where the limitation is. Fixes: 86db36a347b4 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Really make the PTP command read-writeVladimir Oltean1-1/+1
When activating tc-taprio offload on the switch ports, the TAS state machine will try to check whether it is running or not, but will find both the STARTED and STOPPED bits as false in the sja1105_tas_check_running function. So the function will return -EINVAL (an abnormal situation) and the kernel will keep printing this from the TAS FSM workqueue: [ 37.691971] sja1105 spi0.1: An operation returned -22 The reason is that the underlying function that gets called, sja1105_ptp_commit, does not actually do a SPI_READ, but a SPI_WRITE. So the command buffer remains initialized with zeroes instead of retrieving the hardware state. Fix that. Fixes: 41603d78b362 ("net: dsa: sja1105: Make the PTP command read-write") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slotVladimir Oltean2-3/+3
The PTP egress timestamp N must be captured from register PTPEGR_TS[n], where n = 2 * PORT + TSREG. There are 10 PTPEGR_TS registers, 2 per port. We are only using TSREG=0. As opposed to the management slots, which are 4 in number (SJA1105_NUM_PORTS, minus the CPU port). Any management frame (which includes PTP frames) can be sent to any non-CPU port through any management slot. When the CPU port is not the last port (#4), there will be a mismatch between the slot and the port number. Luckily, the only mainline occurrence with this switch (arch/arm/boot/dts/ls1021a-tsn.dts) does have the CPU port as #4, so the issue did not manifest itself thus far. Fixes: 47ed985e97f5 ("net: dsa: sja1105: Add logic for TX timestamping") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30sfc: avoid duplicate error handling code in 'efx_ef10_sriov_set_vf_mac()'Christophe JAILLET1-3/+2
'eth_zero_addr()' is already called in the error handling path. This is harmless, but there is no point in calling it twice, so remove one. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30tcp_cubic: refactor code to perform a divide only when neededEric Dumazet1-23/+28
Neal Cardwell suggested to not change ca->delay_min and apply the ack delay cushion only when Hystart ACK train is still under consideration. This should avoid a 64bit divide unless needed. Tested: 40Gbit(mlx4) testbed (with sch_fq as packet scheduler) $ echo -n 'file tcp_cubic.c +p' >/sys/kernel/debug/dynamic_debug/control $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 14815 16280 15293 15563 11574 15145 14789 18548 16972 12520 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 1396 0.0 $ dmesg | tail -10 [ 4873.951350] hystart_ack_train (116 > 93) delay_min 24 (+ ack_delay 69) cwnd 80 [ 4875.155379] hystart_ack_train (55 > 50) delay_min 21 (+ ack_delay 29) cwnd 160 [ 4876.333921] hystart_ack_train (69 > 62) delay_min 23 (+ ack_delay 39) cwnd 130 [ 4877.519037] hystart_ack_train (69 > 60) delay_min 22 (+ ack_delay 38) cwnd 130 [ 4878.701559] hystart_ack_train (87 > 63) delay_min 24 (+ ack_delay 39) cwnd 160 [ 4879.844597] hystart_ack_train (93 > 50) delay_min 21 (+ ack_delay 29) cwnd 216 [ 4880.956650] hystart_ack_train (74 > 67) delay_min 20 (+ ack_delay 47) cwnd 108 [ 4882.098500] hystart_ack_train (61 > 57) delay_min 23 (+ ack_delay 34) cwnd 130 [ 4883.262056] hystart_ack_train (72 > 67) delay_min 21 (+ ack_delay 46) cwnd 130 [ 4884.418760] hystart_ack_train (74 > 67) delay_min 29 (+ ack_delay 38) cwnd 152 10Gbit(bnx2x) testbed (with sch_fq as packet scheduler) $ echo -n 'file tcp_cubic.c +p' >/sys/kernel/debug/dynamic_debug/control $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpk52 -l -4000000; done;nstat|egrep "Hystart" 7050 7065 7100 6900 7202 7263 7189 6869 7463 7034 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 3199 0.0 $ dmesg | tail -10 [ 176.920012] hystart_ack_train (161 > 141) delay_min 83 (+ ack_delay 58) cwnd 264 [ 179.144645] hystart_ack_train (164 > 159) delay_min 120 (+ ack_delay 39) cwnd 444 [ 181.354527] hystart_ack_train (214 > 168) delay_min 125 (+ ack_delay 43) cwnd 436 [ 183.539565] hystart_ack_train (170 > 147) delay_min 96 (+ ack_delay 51) cwnd 326 [ 185.727309] hystart_ack_train (177 > 160) delay_min 61 (+ ack_delay 99) cwnd 128 [ 187.947142] hystart_ack_train (184 > 167) delay_min 123 (+ ack_delay 44) cwnd 367 [ 190.166680] hystart_ack_train (230 > 153) delay_min 116 (+ ack_delay 37) cwnd 444 [ 192.327285] hystart_ack_train (210 > 206) delay_min 86 (+ ack_delay 120) cwnd 152 [ 194.511392] hystart_ack_train (173 > 151) delay_min 94 (+ ack_delay 57) cwnd 239 [ 196.736023] hystart_ack_train (149 > 146) delay_min 105 (+ ack_delay 41) cwnd 399 Fixes: 42f3a8aaae66 ("tcp_cubic: tweak Hystart detection for short RTT flows") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Neal Cardwell <ncardwell@google.com> Link: https://www.spinics.net/lists/netdev/msg621886.html Link: https://www.spinics.net/lists/netdev/msg621797.html Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy6-19/+30
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29Linux 5.5-rc4Linus Torvalds1-1/+1
2019-12-29mlxsw: spectrum: Use dedicated policer for VRRP packetsIdo Schimmel2-2/+8
Currently, VRRP packets and packets that hit exceptions during routing (e.g., MTU error) are policed using the same policer towards the CPU. This means, for example, that misconfiguration of the MTU on a routed interface can prevent VRRP packets from reaching the CPU, which in turn can cause the VRRP daemon to assume it is the Master router. Fix this by using a dedicated policer for VRRP packets. Fixes: 11566d34f895 ("mlxsw: spectrum: Add VRRP traps") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29mlxsw: spectrum_router: Skip loopback RIFs during MAC validationAmit Cohen1-0/+3
When a router interface (RIF) is created the MAC address of the backing netdev is verified to have the same MSBs as existing RIFs. This is required in order to avoid changing existing RIF MAC addresses that all share the same MSBs. Loopback RIFs are special in this regard as they do not have a MAC address, given they are only used to loop packets from the overlay to the underlay. Without this change, an error is returned when trying to create a RIF after the creation of a GRE tunnel that is represented by a loopback RIF. 'rif->dev->dev_addr' points to the GRE device's local IP, which does not share the same MSBs as physical interfaces. Adding an IP address to any physical interface results in: Error: mlxsw_spectrum: All router interface MAC addresses must have the same prefix. Fix this by skipping loopback RIFs during MAC validation. Fixes: 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29locks: print unsigned ino in /proc/locksAmir Goldstein1-1/+1
An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2019-12-28net: dsa: Deny PTP on master if switch supports itVladimir Oltean1-0/+30
It is possible to kill PTP on a DSA switch completely and absolutely, until a reboot, with a simple command: tcpdump -i eth2 -j adapter_unsynced where eth2 is the switch's DSA master. Why? Well, in short, the PTP API in place today is a bit rudimentary and relies on applications to retrieve the TX timestamps by polling the error queue and looking at the cmsg structure. But there is no timestamp identification of any sorts (except whether it's HW or SW), you don't know how many more timestamps are there to come, which one is this one, from whom it is, etc. In other words, the SO_TIMESTAMPING API is fundamentally limited in that you can get a single HW timestamp from the stack. And the "-j adapter_unsynced" flag of tcpdump enables hardware timestamping. So let's imagine what happens when the DSA master decides it wants to deliver TX timestamps to the skb's socket too: - The timestamp that the user space sees is taken by the DSA master. Whereas the RX timestamp will eventually be overwritten by the DSA switch. So the RX and TX timestamps will be in different time bases (aka garbage). - The user space applications have no way to deal with the second (real) TX timestamp finally delivered by the DSA switch, or even to know to wait for it. Take ptp4l from the linuxptp project, for example. This is its behavior after running tcpdump, before the patch: ptp4l[172]: [6469.594] Unexpected data on socket err queue: ptp4l[172]: [6469.693] rms 8 max 16 freq -21257 +/- 11 delay 748 +/- 0 ptp4l[172]: [6469.711] Unexpected data on socket err queue: ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 03 aa 05 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.721] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 01 c6 b1 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.838] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 03 aa 06 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.848] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 13 02 ptp4l[172]: 0010 00 36 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 04 1a 45 05 7f ptp4l[172]: 0030 00 00 5e 05 41 32 27 c2 1a 68 00 04 9f ff fe 05 ptp4l[172]: 0040 de 06 00 01 ptp4l[172]: [6469.855] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 01 c6 b2 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.974] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 03 aa 07 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 The ptp4l program itself is heavily patched to show this (more details here [0]). Otherwise, by default it just hangs. On the other hand, with the DSA patch to disallow HW timestamping applied: tcpdump -i eth2 -j adapter_unsynced tcpdump: SIOCSHWTSTAMP failed: Device or resource busy So it is a fact of life that PTP timestamping on the DSA master is incompatible with timestamping on the switch MAC, at least with the current API. And if the switch supports PTP, taking the timestamps from the switch MAC is highly preferable anyway, due to the fact that those don't contain the queuing latencies of the switch. So just disallow PTP on the DSA master if there is any PTP-capable switch attached. [0]: https://sourceforge.net/p/linuxptp/mailman/message/36880648/ Fixes: 0336369d3a4d ("net: dsa: forward hardware timestamping ioctls to switch driver") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28gianfar: Fix TX timestamping with a stacked DSA driverVladimir Oltean1-3/+7
The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue. But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing. Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar. There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver. So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it. [0]: https://www.spinics.net/lists/netdev/msg619699.html Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28net/wan/fsl_ucc_hdlc: remove set but not used variables 'ut_info' and 'ret'Chen Zhou1-9/+5
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wan/fsl_ucc_hdlc.c: In function ucc_hdlc_irq_handler: drivers/net/wan/fsl_ucc_hdlc.c:643:23: warning: variable ut_info set but not used [-Wunused-but-set-variable] drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_suspend: drivers/net/wan/fsl_ucc_hdlc.c:880:23: warning: variable ut_info set but not used [-Wunused-but-set-variable] drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_resume: drivers/net/wan/fsl_ucc_hdlc.c:925:6: warning: variable ret set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27riscv: export flush_icache_all to modulesOlof Johansson1-0/+1
This is needed by LKDTM (crash dump test module), it calls flush_icache_range(), which on RISC-V turns into flush_icache_all(). On other architectures, the actual implementation is exported, so follow that precedence and export it here too. Fixes build of CONFIG_LKDTM that fails with: ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined! Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: reject invalid syscalls below -1David Abdurachmanov1-0/+1
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops with "Unable to handle kernel paging request at virtual address" message. This happens when enosys stressor starts testing random non-valid syscalls. I forgot to redirect any syscall below -1 to sys_ni_syscall. With the patch kernel oops messages are gone while running stress-ng enosys stressor. Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: fix compile failure with EXPORT_SYMBOL() & !MMULuc Van Oostenryck2-3/+4
When support for !MMU was added, the declaration of __asm_copy_to_user() & __asm_copy_from_user() were #ifdefed out hence their EXPORT_SYMBOL() give an error message like: .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here Since these symbols are not defined with !MMU it's wrong to export them. Same for __clear_user() (even though this one is also declared in include/asm-generic/uaccess.h and thus doesn't give an error message). Fix this by doing the EXPORT_SYMBOL() directly where these symbols are defined: inside lib/uaccess.S itself. Fixes: 6bd33e1ece52 ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU") Reported-by: kbuild test robot <lkp@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27ethtool: provide link state with LINKSTATE_GET requestMichal Kubecek9-6/+146
Implement LINKSTATE_GET netlink request to get link state information. At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl command is returned. LINKSTATE_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: add LINKMODES_NTF notificationMichal Kubecek5-2/+12
Send ETHTOOL_MSG_LINKMODES_NTF notification message whenever device link settings or advertised modes are modified using ETHTOOL_MSG_LINKMODES_SET netlink message or ETHTOOL_SLINKSETTINGS or ETHTOOL_SSET ioctl commands. The notification message has the same format as reply to LINKMODES_GET request. ETHTOOL_MSG_LINKMODES_SET netlink request only triggers the notification if there is a change but the ioctl command handlers do not check if there is an actual change and trigger the notification whenever the commands are executed. As all work is done by ethnl_default_notify() handler and callback functions introduced to handle LINKMODES_GET requests, all that remains is adding entries for ETHTOOL_MSG_LINKMODES_NTF into ethnl_notify_handlers and ethnl_default_notify_ops lookup tables and calls to ethtool_notify() where needed. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: set link modes related data with LINKMODES_SET requestMichal Kubecek5-0/+269
Implement LINKMODES_SET netlink request to set advertised linkmodes and related attributes as ETHTOOL_SLINKSETTINGS and ETHTOOL_SSET commands do. The request allows setting autonegotiation flag, speed, duplex and advertised link modes. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: provide link mode information with LINKMODES_GET requestMichal Kubecek7-1/+207
Implement LINKMODES_GET netlink request to get link modes related information provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides supported, advertised and peer advertised link modes, autonegotiation flag, speed and duplex. LINKMODES_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: add LINKINFO_NTF notificationMichal Kubecek5-2/+16
Send ETHTOOL_MSG_LINKINFO_NTF notification message whenever device link settings are modified using ETHTOOL_MSG_LINKINFO_SET netlink message or ETHTOOL_SLINKSETTINGS or ETHTOOL_SSET ioctl commands. The notification message has the same format as reply to LINKINFO_GET request. ETHTOOL_MSG_LINKINFO_SET netlink request only triggers the notification if there is a change but the ioctl command handlers do not check if there is an actual change and trigger the notification whenever the commands are executed. As all work is done by ethnl_default_notify() handler and callback functions introduced to handle LINKINFO_GET requests, all that remains is adding entries for ETHTOOL_MSG_LINKINFO_NTF into ethnl_notify_handlers and ethnl_default_notify_ops lookup tables and calls to ethtool_notify() where needed. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: add default notification handlerMichal Kubecek2-1/+92
The ethtool netlink notifications have the same format as related GET replies so that if generic GET handling framework is used to process GET requests, its callbacks and instance of struct get_request_ops can be also used to compose corresponding notification message. Provide function ethnl_std_notify() to be used as notification handler in ethnl_notify_handlers table. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.