Age | Commit message (Collapse) | Author | Files | Lines |
|
In the paths:
sctp_sf_do_unexpected_init() ->
sctp_make_init_ack()
sctp_sf_do_dupcook_a/b()() ->
sctp_sf_do_5_1D_ce()
The new chunk 'retval' transport is set from the incoming chunk 'chunk'
transport. However, 'retval' transport belong to the new asoc, which
is a different one from 'chunk' transport's asoc.
It will cause that the 'retval' chunk gets set with a wrong transport.
Later when sending it and because of Commit b9fd683982c9 ("sctp: add
sctp_packet_singleton"), sctp_packet_singleton() will set some fields,
like vtag to 'retval' chunk from that wrong transport's asoc.
This patch is to fix it by setting 'retval' transport correctly which
belongs to the right asoc in sctp_make_init_ack() and
sctp_sf_do_5_1D_ce().
Fixes: b9fd683982c9 ("sctp: add sctp_packet_singleton")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to improve sctp stream adding events in 2 places:
1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM
and in stream allocation failure checks, as the adding has to
succeed after reconf_timer stops for the in stream adding
request retransmission.
3. In sctp_process_strreset_addstrm_in(), no event should be sent,
as no in or out stream is added here.
Fixes: 50a41591f110 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter")
Fixes: c5c4ebb3ab87 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to improve sctp stream reset events in 4 places:
1. In sctp_process_strreset_outreq(), the flag should always be set with
SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in
stream is reset here.
2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN
check, as the reset has to succeed after reconf_timer stops for the
in stream reset request retransmission.
3. In sctp_process_strreset_inreq(), no event should be sent, as no in
or out stream is reset here.
4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or
OUTGOING event should always be sent for stream reset requests, no
matter it fails or succeeds to process the request.
Fixes: 810544764536 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter")
Fixes: 16e1a91965b0 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter")
Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24
Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst
With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Was helpful in debug for some recent problems.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Otherwise we gradually leak credits leading to potential
hung session.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the server doesn't grant us at least 3 credits during the mount
we won't be able to complete it because query path info operation
requires 3 credits. Use the cached file handle if possible to allow
the mount to succeed.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The current code doesn't do proper accounting for credits
in SMB1 case: it adds one credit per response only if we get
a complete response while it needs to return it unconditionally.
Fix this and also include malformed responses for SMB2+ into
accounting for credits because such responses have Credit
Granted field, thus nothing prevents to get a proper credit
value from them.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We do need to account for credits received in error responses
to read requests on encrypted sessions.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently we mark MID as malformed if we get an error from server
in a read response. This leads to not properly processing credits
in the readv callback. Fix this by marking such a response as
normal received response and process it appropriately.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When executing add_credits() we currently call cifs_reconnect()
if the number of credits is zero and there are no requests in
flight. In this case we may call cifs_reconnect() recursively
twice and cause memory corruption given the following sequence
of functions:
mid1.callback() -> add_credits() -> cifs_reconnect() ->
-> mid2.callback() -> add_credits() -> cifs_reconnect().
Fix this by avoiding to call cifs_reconnect() in add_credits()
and checking for zero credits in the demultiplex thread.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: 7b2e7adea732 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add a few __printf attribute specifiers to routines that
could use them.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The bindings for Qualcomm opp levels changed after being Acked but
before landing. Thus the code in the GPU driver that was relying on
the old bindings is now broken.
Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'. See the patch
("dt-bindings: opp: Introduce opp-level bindings").
NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch. This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.
This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Each GPU core only uses one interrupt so we don't to look up
an interrupt by name and thereby we don't need interrupt-names.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
When debugfs is disabled, but coredump is turned on, the adreno driver fails to build:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
.show = adreno_show,
^~~~
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base')
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit')
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read':
drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show'
Adjust the #ifdef to make it build again.
Fixes: c0fec7f562ec ("drm/msm/gpu: Capture the GPU state on a GPU hang")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Fix typo in REQ_OP_ZONE_RESET description.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The description of the BLKGETNRZONES zoned block device ioctl was not
added as a comment together with this ioctl definition in commit
65e4e3eee83d7 ("block: Introduce BLKGETNRZONES ioctl"). Add its
description here.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch avoids that sparse reports the following warnings:
CHECK block/blk-wbt.c
block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static?
block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static?
CC block/blk-wbt.o
block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes]
void wbt_issue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~
block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes]
void wbt_requeue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~~~
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Swap REQ_NOWAIT and REQ_NOUNMAP and add REQ_HIPRI.
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Precise and non-ambiguous license information is important. The recently
added aegis header file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.
SPDX-License-Identifier: GPL-2.0
versus
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
Oh well.
Assuming that the SPDX identifier is correct and according to x86/hyper-v
contributions from Microsoft GPL V2 only is the usual license.
Remove the boiler plate as it is wrong and even if correct it is redundant.
Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When doing MTU i/o we need to leave some credits for
possible reopen requests and other operations happening
in parallel. Currently we leave 1 credit which is not
enough even for reopen only: we need at least 2 credits
if durable handle reconnect fails. Also there may be
other operations at the same time including compounding
ones which require 3 credits at a time each. Fix this
by leaving 8 credits which is big enough to cover most
scenarios.
Was able to reproduce this when server was configured
to give out fewer credits than usual.
The proper fix would be to reconnect a file handle first
and then obtain credits for an MTU request but this leads
to bigger code changes and should happen in other patches.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The call to SMB2_queary_acl can allocate memory to pntsd and also
return a failure via a call to SMB2_query_acl (and then query_info).
This occurs when query_info allocates the structure and then in
query_info the call to smb2_validate_and_copy_iov fails. Currently the
failure just returns without kfree'ing pntsd hence causing a memory
leak.
Currently, *data is allocated if it's not already pointing to a buffer,
so it needs to be kfree'd only if was allocated in query_info, so the
fix adds an allocated flag to track this. Also set *dlen to zero on
an error just to be safe since *data is kfree'd.
Also set errno to -ENOMEM if the allocation of *data fails.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Dan Carpener <dan.carpenter@oracle.com>
|
|
There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'
Reproduce program:
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#define IPPROTO_IP 0
#define IPPROTO_RAW 255
#define IP_VS_BASE_CTL (64+1024+64)
#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10)
/* The argument to IP_VS_SO_GET_TIMEOUT */
struct ipvs_timeout_t {
int tcp_timeout;
int tcp_fin_timeout;
int udp_timeout;
};
int main() {
int ret = -1;
int sockfd = -1;
struct ipvs_timeout_t to;
sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
if (sockfd == -1) {
printf("socket init error\n");
return -1;
}
to.tcp_timeout = -2147483647;
to.tcp_fin_timeout = -2147483647;
to.udp_timeout = -2147483647;
ret = setsockopt(sockfd,
IPPROTO_IP,
IP_VS_SO_SET_TIMEOUT,
(char *)(&to),
sizeof(to));
printf("setsockopt return %d\n", ret);
return ret;
}
Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Arnd Bergmann pointed out that CONFIG_* cannot be used in a uapi header.
Override with an equivalent conditional.
Fixes: 2e746942ebac ("Input: input_event - provide override for sparc64")
Fixes: 152194fe9c3f ("Input: extend usable life of event timestamps to 2106 on 32 bit systems")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.
Fixes: e9eaf82d97a2 ("drm/i915: Priority boost for waiting clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
(cherry picked from commit 6e062b60b0b1bd82cac475e63cdb8c451647182b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Under heavy load if we don't have any pre-allocated rsps left, we
dynamically allocate a rsp, but we are not actually allocating memory
for nvme_completion (rsp->req.rsp). In such a case, accessing pointer
fields (req->rsp->status) in nvmet_req_init() will result in crash.
To fix this, allocate the memory for nvme_completion by calling
nvmet_rdma_alloc_rsp()
Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load")
Cc: <stable@vger.kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the device supports less queues than provided (if the device has less
completion vectors), we might hit a bug due to the fact that we ignore
that in nvme_rdma_map_queues (we override the maps nr_queues with user
opts).
Instead, keep track of how many default/read/poll queues we actually
allocated (rather than asked by the user) and use that to assign our
queue mappings.
Fixes: b65bb777ef22 (" nvme-rdma: support separate queue maps for read and write")
Reported-by: Saleem, Shiraz <shiraz.saleem@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.
We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.
We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.
Reported-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA
DMA mapping operations stored in the struct device arch data.
Switching arm64 to use the direct calls for the merged DMA direct /
swiotlb code broke this scheme. Replace the indirect calls with
direct-calls in xen-swiotlb as well to fix this problem.
Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot found that ax25 routes where not properly protected
against concurrent use [1].
In this particular report the bug happened while
copying ax25->digipeat.
Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.
The current two ax25_get_route() callers do not sleep,
so this change should be fine.
Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.
[1]
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x123/0x190 mm/kasan/generic.c:191
memcpy+0x24/0x50 mm/kasan/common.c:130
memcpy include/linux/string.h:352 [inline]
kmemdup+0x42/0x60 mm/util.c:113
kmemdup include/linux/string.h:425 [inline]
ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
__sys_connect+0x357/0x490 net/socket.c:1664
__do_sys_connect net/socket.c:1675 [inline]
__se_sys_connect net/socket.c:1672 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1672
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff
Allocated by task 526:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:496 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
kmalloc include/linux/slab.h:545 [inline]
ax25_rt_add net/ax25/ax25_route.c:95 [inline]
ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
sock_do_ioctl+0xe2/0x400 net/socket.c:950
sock_ioctl+0x32f/0x6c0 net/socket.c:1074
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
Freed by task 550:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
__cache_free mm/slab.c:3487 [inline]
kfree+0xcf/0x230 mm/slab.c:3806
ax25_rt_add net/ax25/ax25_route.c:92 [inline]
ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
sock_do_ioctl+0xe2/0x400 net/socket.c:950
sock_ioctl+0x32f/0x6c0 net/socket.c:1074
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff888066641a80
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
96-byte region [ffff888066641a80, ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a bitmap to keep track of which partition types we've already seen;
for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
sfc NICs. Prior to this patch they cause sysfs_warn_dup errors because
they have the same name, causing us not to expose any MTDs at all.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix all typos from hyperv netvsc code comments.
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Alessandro Pilotti" <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Changing mtu, channels, or buffer sizes ops call to netvsc_attach(),
rndis_set_subchannel(), which always reset the hash key to default
value. That will override hash key changed previously. This patch
fixes the problem by save the hash key, then restore it when we re-
add the netvsc device.
Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
These assignments occur in multiple places. The patch refactor them
to a function for simplicity. It also puts the struct to heap area
for future expension.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Hyper-V hosts require us to disable RSS before changing RSS key,
otherwise the changing request will fail. This patch fixes the
coding error.
Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Reported-by: Wei Hu <weh@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
EtherAVB may provide a checksum of packet data appended to packet data. In
order to allow this checksum to be received by the host descriptor data
needs to be enlarged by 2 bytes to accommodate the checksum.
In the case of MTU-sized packets without a VLAN tag the
checksum were already accommodated by virtue of the space reserved for the
VLAN tag. However, a packet of MTU-size with a VLAN tag consumed all
packet data space provided by a descriptor leaving no space for the
trailing checksum.
This was not detected by the driver which incorrectly used the last two
bytes of packet data as the checksum and truncate the packet by two bytes.
This resulted all such packets being dropped.
A work around is to disable RX checksum offload
# ethtool -K eth0 rx off
This patch resolves this problem by increasing the size available for
packet data in RX descriptors by two bytes.
Tested on R-Car E3 (r8a77990) ES1.0 based Ebisu-4D board
v2
* Use sizeof(__sum16) directly rather than adding a driver-local
#define for the size of the checksum provided by the hw (2 bytes).
Fixes: 4d86d3818627 ("ravb: RX checksum offload")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IPMI driver was recently modified to use SRCU, but it turns out
this uses a chunk of percpu memory, even if IPMI is never used.
So modify thing to on initialize on the first use. There was already
code to sort of handle this for handling init races, so piggy back
on top of that, and simplify it in the process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 4.18
|
|
When we do the following test, we got oops in ipmi_msghandler driver
while((1))
do
service ipmievd restart & service ipmievd restart
done
---------------------------------------------------------------
[ 294.230186] Unable to handle kernel paging request at virtual address 0000803fea6ea008
[ 294.230188] Mem abort info:
[ 294.230190] ESR = 0x96000004
[ 294.230191] Exception class = DABT (current EL), IL = 32 bits
[ 294.230193] SET = 0, FnV = 0
[ 294.230194] EA = 0, S1PTW = 0
[ 294.230195] Data abort info:
[ 294.230196] ISV = 0, ISS = 0x00000004
[ 294.230197] CM = 0, WnR = 0
[ 294.230199] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000a1c1b75a
[ 294.230201] [0000803fea6ea008] pgd=0000000000000000
[ 294.230204] Internal error: Oops: 96000004 [#1] SMP
[ 294.235211] Modules linked in: nls_utf8 isofs rpcrdma ib_iser ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce sha2_ce ses sha256_arm64 sha1_ce hibmc_drm hisi_sas_v2_hw enclosure sg hisi_sas_main sbsa_gwdt ip_tables mlx5_ib ib_uverbs marvell ib_core mlx5_core ixgbe ipmi_si mdio hns_dsaf ipmi_devintf ipmi_msghandler hns_enet_drv hns_mdio
[ 294.277745] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.0.0-rc2+ #113
[ 294.285511] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.37 11/21/2017
[ 294.292835] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 294.297695] pc : __srcu_read_lock+0x38/0x58
[ 294.301940] lr : acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler]
[ 294.307853] sp : ffff00001001bc80
[ 294.311208] x29: ffff00001001bc80 x28: ffff0000117e5000
[ 294.316594] x27: 0000000000000000 x26: dead000000000100
[ 294.321980] x25: dead000000000200 x24: ffff803f6bd06800
[ 294.327366] x23: 0000000000000000 x22: 0000000000000000
[ 294.332752] x21: ffff00001001bd04 x20: ffff80df33d19018
[ 294.338137] x19: ffff80df33d19018 x18: 0000000000000000
[ 294.343523] x17: 0000000000000000 x16: 0000000000000000
[ 294.348908] x15: 0000000000000000 x14: 0000000000000002
[ 294.354293] x13: 0000000000000000 x12: 0000000000000000
[ 294.359679] x11: 0000000000000000 x10: 0000000000100000
[ 294.365065] x9 : 0000000000000000 x8 : 0000000000000004
[ 294.370451] x7 : 0000000000000000 x6 : ffff80df34558678
[ 294.375836] x5 : 000000000000000c x4 : 0000000000000000
[ 294.381221] x3 : 0000000000000001 x2 : 0000803fea6ea000
[ 294.386607] x1 : 0000803fea6ea008 x0 : 0000000000000001
[ 294.391994] Process swapper/3 (pid: 0, stack limit = 0x0000000083087293)
[ 294.398791] Call trace:
[ 294.401266] __srcu_read_lock+0x38/0x58
[ 294.405154] acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler]
[ 294.410716] deliver_response+0x80/0xf8 [ipmi_msghandler]
[ 294.416189] deliver_local_response+0x28/0x68 [ipmi_msghandler]
[ 294.422193] handle_one_recv_msg+0x158/0xcf8 [ipmi_msghandler]
[ 294.432050] handle_new_recv_msgs+0xc0/0x210 [ipmi_msghandler]
[ 294.441984] smi_recv_tasklet+0x8c/0x158 [ipmi_msghandler]
[ 294.451618] tasklet_action_common.isra.5+0x88/0x138
[ 294.460661] tasklet_action+0x2c/0x38
[ 294.468191] __do_softirq+0x120/0x2f8
[ 294.475561] irq_exit+0x134/0x140
[ 294.482445] __handle_domain_irq+0x6c/0xc0
[ 294.489954] gic_handle_irq+0xb8/0x178
[ 294.497037] el1_irq+0xb0/0x140
[ 294.503381] arch_cpu_idle+0x34/0x1a8
[ 294.510096] do_idle+0x1d4/0x290
[ 294.516322] cpu_startup_entry+0x28/0x30
[ 294.523230] secondary_start_kernel+0x184/0x1d0
[ 294.530657] Code: d538d082 d2800023 8b010c81 8b020021 (c85f7c25)
[ 294.539746] ---[ end trace 8a7a880dee570b29 ]---
[ 294.547341] Kernel panic - not syncing: Fatal exception in interrupt
[ 294.556837] SMP: stopping secondary CPUs
[ 294.563996] Kernel Offset: disabled
[ 294.570515] CPU features: 0x002,21006008
[ 294.577638] Memory Limit: none
[ 294.587178] Starting crashdump kernel...
[ 294.594314] Bye!
Because the user->release_barrier.rda is freed in ipmi_destroy_user(), but
the refcount is not zero, when acquire_ipmi_user() uses user->release_barrier.rda
in __srcu_read_lock(), it causes oops.
Fix this by calling cleanup_srcu_struct() when the refcount is zero.
Fixes: e86ee2d44b44 ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr
handlers that call ipmi_free_recv_msg() directly. This will essentially
kfree(msg), leading to use-after-free.
This does not happen in the ipmi_devintf module, which will queue the
message and run ipmi_free_recv_msg() later.
BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0
Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27
CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G O 4.19.11-amd64-ani99-debug #12.0.1.601133+pv
Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018
Call Trace:
dump_stack+0x92/0xeb
print_address_description+0x73/0x290
kasan_report+0x258/0x380
deliver_response+0x12f/0x1b0
? ipmi_free_recv_msg+0x50/0x50
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
...
Allocated by task 9885:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x116/0x290
ipmi_alloc_recv_msg+0x28/0x70
i_ipmi_request+0xb4a/0x1640
ipmi_request_settime+0x1b8/0x1e0
...
Freed by task 27:
__kasan_slab_free+0x12e/0x180
kfree+0xe9/0x280
deliver_response+0x122/0x1b0
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
tasklet_action_common.isra.19+0xc4/0x250
__do_softirq+0x11f/0x51f
Fixes: e86ee2d44b44 ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
channel and addr->channel are indirectly controlled by user-space,
hence leading to a potential exploitation of the Spectre variant 1
vulnerability.
These issues were detected with the help of Smatch:
drivers/char/ipmi/ipmi_msghandler.c:1381 ipmi_set_my_address() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1401 ipmi_get_my_address() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1421 ipmi_set_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1441 ipmi_get_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:2260 check_addr() warn: potential spectre issue 'intf->addrinfo' [r] (local cap)
Fix this by sanitizing channel and addr->channel before using them to
index user->intf->addrinfo and intf->addrinfo, correspondingly.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
The block number was not being compared right, it was off by one
when checking the response.
Some statistics wouldn't be incremented properly in some cases.
Check to see if that middle-part messages always have 31 bytes of
data.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
|
|
Using the {0} construct as a generic initializer is perfectly fine in C,
however due to a bug in old gcc there is a warning:
+ /kisskb/src/drivers/vfio/pci/vfio_pci_nvlink2.c: warning: (near
initialization for 'cap.header') [-Wmissing-braces]: => 181:9
Since for whatever reason we still want to compile the modern kernel
with such an old gcc without warnings, this changes the capabilities
initialization.
The gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
GVT-g will shadow the privilege batch buffer and the indirect context
during command scan, move the release process into
intel_vgpu_destroy_workload() to ensure the resources are recycled
properly.
Fixes: 0cce2823ed37 ("drm/i915/gvt/kvmgt:Refine error handling for prepare_execlist_workload")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|