aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-23gre: remove duplicated assignment of iphColin Ian King1-1/+0
iph is being assigned the same value twice; remove the redundant first assignment. (Thanks to Nikolay Aleksandrov for pointing out that the first asssignment should be removed and not the second) Fixes warning: net/ipv4/ip_gre.c:265:2: warning: Value stored to 'iph' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23ipv4: do metrics match when looking up and deleting a routeXin Long3-1/+37
Now when ipv4 route inserts a fib_info, it memcmp fib_metrics. It means ipv4 route identifies one route also with metrics. But when removing a route, it tries to find the route without caring about the metrics. It will cause that the route with right metrics can't be removed. Thomas noticed this issue when doing the testing: 1. add: # ip route append 192.168.7.0/24 dev v window 1000 # ip route append 192.168.7.0/24 dev v window 1001 # ip route append 192.168.7.0/24 dev v window 1002 # ip route append 192.168.7.0/24 dev v window 1003 2. delete: # ip route delete 192.168.7.0/24 dev v window 1002 3. show: 192.168.7.0/24 proto boot scope link window 1001 192.168.7.0/24 proto boot scope link window 1002 192.168.7.0/24 proto boot scope link window 1003 The one with window 1002 wasn't deleted but the first one was. This patch is to do metrics match when looking up and deleting one route. Reported-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsgMike Maloney3-4/+98
When SOF_TIMESTAMPING_RX_SOFTWARE is enabled for tcp sockets, return the timestamp corresponding to the highest sequence number data returned. Previously the skb->tstamp is overwritten when a TCP packet is placed in the out of order queue. While the packet is in the ooo queue, save the timestamp in the TCB_SKB_CB. This space is shared with the gso_* options which are only used on the tx path, and a previously unused 4 byte hole. When skbs are coalesced either in the sk_receive_queue or the out_of_order_queue always choose the timestamp of the appended skb to maintain the invariant of returning the timestamp of the last byte in the recvmsg buffer. Signed-off-by: Mike Maloney <maloney@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22gre: fix goto statement typoWilliam Tu1-2/+2
Fix typo: pnet_tap_faied. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22gre: introduce native tunnel support for ERSPANWilliam Tu1-0/+269
The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22udp: remove unreachable ufo branchesWillem de Bruijn2-9/+5
Remove two references to ufo in the udp send path that are no longer reachable now that ufo has been removed. Commit 85f1bd9a7b5a ("udp: consistently apply ufo or fragmentation") is a fix to ufo. It is safe to revert what remains of it. Also, no skb can enter ip_append_page with skb_is_gso true now that skb_shinfo(skb)->gso_type is no longer set in ip_append_page/_data. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22tcp: Remove the unused parameter for tcp_try_fastopen.Tonghao Zhang2-5/+3
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22tcp: Get a proper dst before checking it.Tonghao Zhang1-5/+4
tcp_peer_is_proven needs a proper route to make the determination, but dst always is NULL. This bug may be there at the beginning of git tree. This does not look serious enough to deserve backports to stable versions. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-7/+22
2017-08-21Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller3-9/+24
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-08-21 1) Support RX checksum with IPsec crypto offload for esp4/esp6. From Ilan Tayari. 2) Fixup IPv6 checksums when doing IPsec crypto offload. From Yossi Kuperman. 3) Auto load the xfrom offload modules if a user installs a SA that requests IPsec offload. From Ilan Tayari. 4) Clear RX offload informations in xfrm_input to not confuse the TX path with stale offload informations. From Ilan Tayari. 5) Allow IPsec GSO for local sockets if the crypto operation will be offloaded. 6) Support setting of an output mark to the xfrm_state. This mark can be used to to do the tunnel route lookup. From Lorenzo Colitti. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: inet: diag: expose sockets cgroup classidLevin, Alexander (Sasha Levin)1-0/+11
This is useful for directly looking up a task based on class id rather than having to scan through all open file descriptors. Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18tcp: when rearming RTO, if RTO time is in past then fire RTO ASAPNeal Cardwell1-2/+1
In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is setRoopa Prabhu1-2/+9
Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <idaifish@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18ipv4: convert dst_metrics.refcnt from atomic_t to refcount_tEric Dumazet2-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18datagram: When peeking datagrams with offset < 0 don't skip empty skbsMatthew Dawson1-1/+2
Due to commit e6afc8ace6dd5cef5e812f26c72579da8806f5ac ("udp: remove headers from UDP packets before queueing"), when udp packets are being peeked the requested extra offset is always 0 as there is no need to skip the udp header. However, when the offset is 0 and the next skb is of length 0, it is only returned once. The behaviour can be seen with the following python script: from socket import *; f=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0); g=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0); f.bind(('::', 0)); addr=('::1', f.getsockname()[1]); g.sendto(b'', addr) g.sendto(b'b', addr) print(f.recvfrom(10, MSG_PEEK)); print(f.recvfrom(10, MSG_PEEK)); Where the expected output should be the empty string twice. Instead, make sk_peek_offset return negative values, and pass those values to __skb_try_recv_datagram/__skb_try_recv_from_queue. If the passed offset to __skb_try_recv_from_queue is negative, the checked skb is never skipped. __skb_try_recv_from_queue will then ensure the offset is reset back to 0 if a peek is requested without an offset, unless no packets are found. Also simplify the if condition in __skb_try_recv_from_queue. If _off is greater then 0, and off is greater then or equal to skb->len, then (_off || skb->len) must always be true assuming skb->len >= 0 is always true. Also remove a redundant check around a call to sk_peek_offset in af_unix.c, as it double checked if MSG_PEEK was set in the flags. V2: - Moved the negative fixup into __skb_try_recv_from_queue, and remove now redundant checks - Fix peeking in udp{,v6}_recvmsg to report the right value when the offset is 0 V3: - Marked new branch in __skb_try_recv_from_queue as unlikely. Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16ipv4: better IP_MAX_MTU enforcementEric Dumazet1-1/+1
While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16tcp: Export tcp_{sendpage,sendmsg}_locked() for ipv6.David S. Miller1-0/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16net: igmp: Use ingress interface rather than vrf deviceDavid Ahern1-1/+9
Anuradha reported that statically added groups for interfaces enslaved to a VRF device were not persisting. The problem is that igmp queries and reports need to use the data in the in_dev for the real ingress device rather than the VRF device. Update igmp_rcv accordingly. Fixes: e58e41596811 ("net: Enable support for VRF with ipv4 multicast") Reported-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-15/+18
2017-08-15ipv4: route: set ipv4 RTM_GETROUTE to not use rtnlFlorian Westphal1-1/+2
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15ipv4: fix NULL dereference in free_fib_info_rcu()Eric Dumazet1-5/+7
If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daff8e9 ("ipv4: add reference counting to metrics") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14tcp: fix possible deadlock in TCP stack vs BPF filterEric Dumazet1-2/+2
Filtering the ACK packet was not put at the right place. At this place, we already allocated a child and put it into accept queue. We absolutely need to call tcp_child_process() to release its spinlock, or we will deadlock at accept() or close() time. Found by syzkaller team (Thanks a lot !) Fixes: 8fac365f63c8 ("tcp: Add a tcp_filter hook before handle ack packet") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14tcp: ulp: avoid module refcnt leak in tcp_set_ulpSabrina Dubroca1-7/+7
__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on the module. Then, if ->init fails, tcp_set_ulp propagates the error but nothing releases that reference. Fixes: 734942cc4ea6 ("tcp: ULP infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14ipv4: route: fix inet_rtm_getroute induced crashFlorian Westphal1-1/+2
"ip route get $daddr iif eth0 from $saddr" causes: BUG: KASAN: use-after-free in ip_route_input_rcu+0x1535/0x1b50 Call Trace: ip_route_input_rcu+0x1535/0x1b50 ip_route_input_noref+0xf9/0x190 tcp_v4_early_demux+0x1a4/0x2b0 ip_rcv+0xbcb/0xc05 __netif_receive_skb+0x9c/0xd0 netif_receive_skb_internal+0x5a8/0x890 Problem is that inet_rtm_getroute calls either ip_route_input_rcu (if an iif was provided) or ip_route_output_key_hash_rcu. But ip_route_input_rcu, unlike ip_route_output_key_hash_rcu, already associates the dst_entry with the skb. This clears the SKB_DST_NOREF bit (i.e. skb_dst_drop will release/free the entry while it should not). Thus only set the dst if we called ip_route_output_key_hash_rcu(). I tested this patch by running: while true;do ip r get 10.0.1.2;done > /dev/null & while true;do ip r get 10.0.1.2 iif eth0 from 10.0.1.1;done > /dev/null & ... and saw no crash or memory leak. Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David Ahern <dsahern@gmail.com> Fixes: ba52d61e0ff ("ipv4: route: restore skb_dst_set in inet_rtm_getroute") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13net: ipv4: add check for l3slave for index returned in IP_PKTINFODavid Ahern1-1/+2
Similar to the loopback device, for packets sent through a VRF device the index returned in ipi_ifindex needs to be the saved index in rt_iif. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13net: ipv4: remove unnecessary check on orig_oifDavid Ahern1-1/+1
rt_iif is going to be set to either 0 or orig_oif. If orig_oif is 0 it amounts to the same end result so remove the check. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: ipv4: set orig_oif based on fib result for local trafficDavid Ahern1-0/+6
Attempts to connect to a local address with a socket bound to a device with the local address hangs if there is no listener: $ ip addr sh dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 02:e0:f9:1c:00:37 brd ff:ff:ff:ff:ff:ff inet 10.100.1.4/24 scope global eth1 valid_lft forever preferred_lft forever inet6 2001:db8:1::4/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:37/64 scope link valid_lft forever preferred_lft forever $ vrf-test -I eth1 -r 10.100.1.4 <hangs when there is no server> (don't let the command name fool you; vrf-test works without vrfs.) The problem is that the original intended device, eth1 in this case, is lost when the tcp reset is sent, so the socket lookup does not find a match for the reset and the connect attempt hangs. Fix by adjusting orig_oif for local traffic to the device from the fib lookup result. With this patch you get the more user friendly: $ vrf-test -I eth1 -r 10.100.1.4 connect failed: 111: Connection refused orig_oif is saved to the newly created rtable as rt_iif and when set it is used as the dif for socket lookups. It is set based on flowi4_oif passed in to ip_route_output_key_hash_rcu and will be set to either the loopback device, an l3mdev device, nothing (flowi4_oif = 0 which is the case in the example above) or a netdev index depending on the lookup path. In each case, resetting orig_oif to the device in the fib result for the RTN_LOCAL case allows the actual device to be preserved as the skb tx and rx is done over the loopback or VRF device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: xfrm: support setting an output mark.Lorenzo Colitti1-5/+9
On systems that use mark-based routing it may be necessary for routing lookups to use marks in order for packets to be routed correctly. An example of such a system is Android, which uses socket marks to route packets via different networks. Currently, routing lookups in tunnel mode always use a mark of zero, making routing incorrect on such systems. This patch adds a new output_mark element to the xfrm state and a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output mark differs from the existing xfrm mark in two ways: 1. The xfrm mark is used to match xfrm policies and states, while the xfrm output mark is used to set the mark (and influence the routing) of the packets emitted by those states. 2. The existing mark is constrained to be a subset of the bits of the originating socket or transformed packet, but the output mark is arbitrary and depends only on the state. The use of a separate mark provides additional flexibility. For example: - A packet subject to two transforms (e.g., transport mode inside tunnel mode) can have two different output marks applied to it, one for the transport mode SA and one for the tunnel mode SA. - On a system where socket marks determine routing, the packets emitted by an IPsec tunnel can be routed based on a mark that is determined by the tunnel, not by the marks of the unencrypted packets. - Support for setting the output marks can be introduced without breaking any existing setups that employ both mark-based routing and xfrm tunnel mode. Simply changing the code to use the xfrm mark for routing output packets could xfrm mark could change behaviour in a way that breaks these setups. If the output mark is unspecified or set to zero, the mark is not set or changed. Tested: make allyesconfig; make -j64 Tested: https://android-review.googlesource.com/452776 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-7/+8
Mainline had UFO fixes, but UFO is removed in net-next so we take the HEAD hunks. Minor context conflict in bcmsysport statistics bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10udp: consistently apply ufo or fragmentationWillem de Bruijn2-4/+6
When iteratively building a UDP datagram with MSG_MORE and that datagram exceeds MTU, consistently choose UFO or fragmentation. Once skb_is_gso, always apply ufo. Conversely, once a datagram is split across multiple skbs, do not consider ufo. Sendpage already maintains the first invariant, only add the second. IPv6 does not have a sendpage implementation to modify. A gso skb must have a partial checksum, do not follow sk_no_check_tx in udp_send_skb. Found by syzkaller. Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09igmp: Fix regression caused by igmp sysctl namespace code.Nikolay Borisov2-6/+7
Commit dcd87999d415 ("igmp: net: Move igmp namespace init to correct file") moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This function is only called as part of per-namespace initialization, only if CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is compiled out, casuing the igmp pernet ops to not be registerd and those sysctl being left initialized with 0. However, there are certain functions, such as ip_mc_join_group which are always compiled and make use of some of those sysctls. Let's do a partial revert of the aforementioned commit and move the sysctl initialization into inet_init_net, that way they will always have sane values. Fixes: dcd87999d415 ("igmp: net: Move igmp namespace init to correct file") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595 Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09rtnetlink: make rtnl_register accept a flags parameterFlorian Westphal4-12/+12
This change allows us to later indicate to rtnetlink core that certain doit functions should be called without acquiring rtnl_mutex. This change should have no effect, we simply replace the last (now unused) calcit argument with the new flag. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-36/+41
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: avoid skb_warn_bad_offload false positives on UFOWillem de Bruijn1-1/+1
skb_warn_bad_offload triggers a warning when an skb enters the GSO stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL checksum offload set. Commit b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise") observed that SKB_GSO_DODGY producers can trigger the check and that passing those packets through the GSO handlers will fix it up. But, the software UFO handler will set ip_summed to CHECKSUM_NONE. When __skb_gso_segment is called from the receive path, this triggers the warning again. Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On Tx these two are equivalent. On Rx, this better matches the skb state (checksum computed), as CHECKSUM_NONE here means no checksum computed. See also this thread for context: http://patchwork.ozlabs.org/patch/799015/ Fixes: b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08tcp: fastopen: tcp_connect() must refresh the routeEric Dumazet1-0/+4
With new TCP_FASTOPEN_CONNECT socket option, there is a possibility to call tcp_connect() while socket sk_dst_cache is either NULL or invalid. +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(4, ..., ...) = 0 << sk->sk_dst_cache becomes obsolete, or even set to NULL >> +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000 We need to refresh the route otherwise bad things can happen, especially when syzkaller is running on the host :/ Fixes: 19f6d3f3c8422 ("net/tcp-fastopen: Add new API support") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv6: add second dif to raw socket lookupsDavid Ahern1-1/+1
Add a second device index, sdif, to raw socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv6: add second dif to udp socket lookupsDavid Ahern1-2/+2
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to multicast source filterDavid Ahern3-4/+6
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to raw socket lookupsDavid Ahern2-6/+12
Add a second device index, sdif, to raw socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to inet socket lookupsDavid Ahern3-18/+28
Add a second device index, sdif, to inet socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. TCP moves the data in the cb. Prior to tcp_v4_rcv (e.g., early demux) the ingress index is obtained from IPCB using inet_sdif and after the cb move in tcp_v4_rcv the tcp_v4_sdif helper is used. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to udp socket lookupsDavid Ahern2-27/+37
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06tcp: consolidate congestion control undo functionsYuchung Cheng9-103/+9
Most TCP congestion controls are using identical logic to undo cwnd except BBR. This patch consolidates these similar functions to the one used currently by Reno and others. Suggested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06tcp: fix cwnd undo in Reno and HTCP congestion controlsYuchung Cheng3-3/+3
Using ssthresh to revert cwnd is less reliable when ssthresh is bounded to 2 packets. This patch uses an existing variable in TCP "prior_cwnd" that snapshots the cwnd right before entering fast recovery and RTO recovery in Reno. This fixes the issue discussed in netdev thread: "A buggy behavior for Linux TCP Reno and HTCP" https://www.spinics.net/lists/netdev/msg444955.html Suggested-by: Neal Cardwell <ncardwell@google.com> Reported-by: Wei Sun <unlcsewsun@gmail.com> Signed-off-by: Yuchung Cheng <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06udp: no need to preserve skb->dstPaolo Abeni1-8/+5
__ip_options_echo() does not need anymore skb->dst, so we can avoid explicitly preserving it for its own sake. This is almost a revert of commit 0ddf3fb2c43d ("udp: preserve skb->dst if required for IP options processing") plus some lifting to fit later changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06Revert "ipv4: keep skb->dst around in presence of IP options"Paolo Abeni1-8/+1
ip_options_echo() does not use anymore the skb->dst and don't need to keep the dst around for options's sake only. This reverts commit 34b2cef20f19c87999fff3da4071e66937db9644. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06ip/options: explicitly provide net ns to __ip_options_echo()Paolo Abeni6-11/+12
__ip_options_echo() uses the current network namespace, and currently retrives it via skb->dst->dev. This commit adds an explicit 'net' argument to __ip_options_echo() and update all the call sites to provide it, usually via a simpler sock_net(). After this change, __ip_options_echo() no more needs to access skb->dst and we can drop a couple of hack to preserve such info in the rx path. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06IP: do not modify ingress packet IP option in ip_options_echo()Paolo Abeni1-3/+0
While computing the response option set for LSRR, ip_options_echo() also changes the ingress packet LSRR addresses list, setting the last one to the dst specific address for the ingress packet - via memset(start[ ... The only visible effect of such change - beyond possibly damaging shared/cloned skbs - is modifying the data carried by ICMP replies changing the header information for reported the ingress packet, which violates RFC1122 3.2.2.6. All the others call sites just ignore the ingress packet IP options after calling ip_options_echo() Note that the last element in the LSRR option address list for the reply packet will be properly set later in the ip output path via ip_options_build(). This buggy memset() predates git history and apparently was present into the initial ip_options_echo() implementation in linux 1.3.30 but still looks wrong. The removal of the fib_compute_spec_dst() call will help completely dropping the skb->dst usage by __ip_options_echo() with a later patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03tcp: enable MSG_ZEROCOPYWillem de Bruijn1-1/+31
Enable support for MSG_ZEROCOPY to the TCP stack. TSO and GSO are both supported. Only data sent to remote destinations is sent without copying. Packets looped onto a local destination have their payload copied to avoid unbounded latency. Tested: A 10x TCP_STREAM between two hosts showed a reduction in netserver process cycles by up to 70%, depending on packet size. Systemwide, savings are of course much less pronounced, at up to 20% best case. msg_zerocopy.sh 4 tcp: without zerocopy tx=121792 (7600 MB) txc=0 zc=n rx=60458 (7600 MB) with zerocopy tx=286257 (17863 MB) txc=286257 zc=y rx=140022 (17863 MB) This test opens a pair of sockets over veth, one one calls send with 64KB and optionally MSG_ZEROCOPY and on the other reads the initial bytes. The receiver truncates, so this is strictly an upper bound on what is achievable. It is more representative of sending data out of a physical NIC (when payload is not touched, either). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03tcp: fix xmit timer to only be reset if data ACKed/SACKedNeal Cardwell2-18/+16
Fix a TCP loss recovery performance bug raised recently on the netdev list, in two threads: (i) July 26, 2017: netdev thread "TCP fast retransmit issues" (ii) July 26, 2017: netdev thread: "[PATCH V2 net-next] TLP: Don't reschedule PTO when there's one outstanding TLP retransmission" The basic problem is that incoming TCP packets that did not indicate forward progress could cause the xmit timer (TLP or RTO) to be rearmed and pushed back in time. In certain corner cases this could result in the following problems noted in these threads: - Repeated ACKs coming in with bogus SACKs corrupted by middleboxes could cause TCP to repeatedly schedule TLPs forever. We kept sending TLPs after every ~200ms, which elicited bogus SACKs, which caused more TLPs, ad infinitum; we never fired an RTO to fill in the holes. - Incoming data segments could, in some cases, cause us to reschedule our RTO or TLP timer further out in time, for no good reason. This could cause repeated inbound data to result in stalls in outbound data, in the presence of packet loss. This commit fixes these bugs by changing the TLP and RTO ACK processing to: (a) Only reschedule the xmit timer once per ACK. (b) Only reschedule the xmit timer if tcp_clean_rtx_queue() deems the ACK indicates sufficient forward progress (a packet was cumulatively ACKed, or we got a SACK for a packet that was sent before the most recent retransmit of the write queue head). This brings us back into closer compliance with the RFCs, since, as the comment for tcp_rearm_rto() notes, we should only restart the RTO timer after forward progress on the connection. Previously we were restarting the xmit timer even in these cases where there was no forward progress. As a side benefit, this commit simplifies and speeds up the TCP timer arming logic. We had been calling inet_csk_reset_xmit_timer() three times on normal ACKs that cumulatively acknowledged some data: 1) Once near the top of tcp_ack() to switch from TLP timer to RTO: if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) tcp_rearm_rto(sk); 2) Once in tcp_clean_rtx_queue(), to update the RTO: if (flag & FLAG_ACKED) { tcp_rearm_rto(sk); 3) Once in tcp_ack() after tcp_fastretrans_alert() to switch from RTO to TLP: if (icsk->icsk_pending == ICSK_TIME_RETRANS) tcp_schedule_loss_probe(sk); This commit, by only rescheduling the xmit timer once per ACK, simplifies the code and reduces CPU overhead. This commit was tested in an A/B test with Google web server traffic. SNMP stats and request latency metrics were within noise levels, substantiating that for normal web traffic patterns this is a rare issue. This commit was also tested with packetdrill tests to verify that it fixes the timer behavior in the corner cases discussed in the netdev threads mentioned above. This patch is a bug fix patch intended to be queued for -stable relases. Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Reported-by: Klavs Klavsen <kl@vsen.dk> Reported-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03tcp: enable xmit timer fix by having TLP use time when RTO should fireNeal Cardwell1-9/+5
Have tcp_schedule_loss_probe() base the TLP scheduling decision based on when the RTO *should* fire. This is to enable the upcoming xmit timer fix in this series, where tcp_schedule_loss_probe() cannot assume that the last timer installed was an RTO timer (because we are no longer doing the "rearm RTO, rearm RTO, rearm TLP" dance on every ACK). So tcp_schedule_loss_probe() must independently figure out when an RTO would want to fire. In the new TLP implementation following in this series, we cannot assume that icsk_timeout was set based on an RTO; after processing a cumulative ACK the icsk_timeout we see can be from a previous TLP or RTO. So we need to independently recalculate the RTO time (instead of reading it out of icsk_timeout). Removing this dependency on the nature of icsk_timeout makes things a little easier to reason about anyway. Note that the old and new code should be equivalent, since they are both saying: "if the RTO is in the future, but at an earlier time than the normal TLP time, then set the TLP timer to fire when the RTO would have fired". Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.