| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Adding delays to TCP flows is crucial for studying behavior
of TCP stacks, including congestion control modules.
Linux offers netem module, but it has unpractical constraints :
- Need root access to change qdisc
- Hard to setup on egress if combined with non trivial qdisc like FQ
- Single delay for all flows.
EDT (Earliest Departure Time) adoption in TCP stack allows us
to enable a per socket delay at a very small cost.
Networking tools can now establish thousands of flows, each of them
with a different delay, simulating real world conditions.
This requires FQ packet scheduler or a EDT-enabled NIC.
This patchs adds TCP_TX_DELAY socket option, to set a delay in
usec units.
unsigned int tx_delay = 10000; /* 10 msec */
setsockopt(fd, SOL_TCP, TCP_TX_DELAY, &tx_delay, sizeof(tx_delay));
Note that FQ packet scheduler limits might need some tweaking :
man tc-fq
PARAMETERS
limit
Hard limit on the real queue size. When this limit is
reached, new packets are dropped. If the value is lowered,
packets are dropped so that the new limit is met. Default
is 10000 packets.
flow_limit
Hard limit on the maximum number of packets queued per
flow. Default value is 100.
Use of TCP_TX_DELAY option will increase number of skbs in FQ qdisc,
so packets would be dropped if any of the previous limit is hit.
Use of a jump label makes this support runtime-free, for hosts
never using the option.
Also note that TSQ (TCP Small Queues) limits are slightly changed
with this patch : we need to account that skbs artificially delayed
wont stop us providind more skbs to feed the pipe (netem uses
skb_orphan_partial() for this purpose, but FQ can not use this trick)
Because of that, using big delays might very well trigger
old bugs in TSO auto defer logic and/or sndbuf limited detection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for atomically upating a nexthop config.
When updating a nexthop, walk the lists of associated fib entries and
verify the new config is valid. Replace is done by swapping nh_info
for single nexthops - new config is applied to old nexthop struct, and
old config is moved to new nexthop struct. For nexthop groups the same
applies but for nh_group. In addition for groups the nh_parent reference
needs to be updated. The old config is released by calling __remove_nexthop
on the 'new' nexthop which now has the old config. This is done to avoid
messing around with the list_heads that track which fib entries are
using the nexthop.
After the swap of config data, bump the sequence counters for FIB entries
to invalidate any dst entries and send notifications to userspace. The
notifications include the new nexthop spec as well as any fib entries
using the updated nexthop struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Be optimistic about re-using a fib_info when nexthop id is given and
the route does not use metrics. Avoids a memory allocation which in
most cases is expected to be freed anyways.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for RTA_NH_ID attribute to allow a user to specify a
nexthop id to use with a route. fc_nh_id is added to fib_config to
hold the value passed in the RTA_NH_ID attribute. If a nexthop id
is given, the gateway, device, encap and multipath attributes can
not be set.
Update fib_nh_match to check ids on a route delete.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPv6 has traditionally had a single fib6_nh per fib6_info. With
nexthops we can have multiple fib6_nh associated with a fib6_info.
Add a nexthop helper to invoke a callback for each fib6_nh in a
'struct nexthop'. If the callback returns non-0, the loop is
stopped and the return value passed to the caller.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix sparse warning:
net/ipv4/tcp_fastopen.c:75:29: warning:
symbol 'tcp_fastopen_alloc_ctx' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case autoflowlabel is in action, skb_get_hash_flowi6()
derives a non zero skb->hash to the flowlabel.
If skb->hash is zero, a flow dissection is performed.
Since all TCP skbs sent from ESTABLISH state inherit their
skb->hash from sk->sk_txhash, we better keep a copy
of sk->sk_txhash into the TIME_WAIT socket.
After this patch, ACK or RST packets sent on behalf of
a TIME_WAIT socket have the flowlabel that was previously
used by the flow.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.
2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.
3) Fix UDP socket lookup wrt. VRF, from Tim Beale.
4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.
5) Memory leak on unload in RDS, from Zhu Yanjun.
6) sctp_process_init leak, from Neil HOrman.
7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...
|
|
small cleanup: "struct request_sock_queue *queue" parameter of reqsk_queue_unlink
func is never used in the func, so we can remove it.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the topo:
h1 ---| rp1 |
| route rp3 |--- h3 (192.168.200.1)
h2 ---| rp2 |
If rp1 bc_forwarding is set while rp2 bc_forwarding is not, after
doing "ping 192.168.200.255" on h1, then ping 192.168.200.255 on
h2, and the packets can still be forwared.
This issue was caused by the input route cache. It should only do
the cache for either bc forwarding or local delivery. Otherwise,
local delivery can use the route cache for bc forwarding of other
interfaces.
This patch is to fix it by not doing cache for local delivery if
all.bc_forwarding is enabled.
Note that we don't fix it by checking route cache local flag after
rt_cache_valid() in "local_input:" and "ip_mkroute_input", as the
common route code shouldn't be touched for bc_forwarding.
Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IS_ERR() already calls unlikely(), so this extra unlikely() call
around IS_ERR() is not needed.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add struct nexthop and nh_list list_head to fib6_info. nh_list is the
fib6_info side of the nexthop <-> fib_info relationship. Since a fib6_info
referencing a nexthop object can not have 'sibling' entries (the old way
of doing multipath routes), the nh_list is a union with fib6_siblings.
Add f6i_list list_head to 'struct nexthop' to track fib6_info entries
using a nexthop instance. Update __remove_nexthop_fib to walk f6_list
and delete fib entries using the nexthop.
Add a few nexthop helpers for use when a nexthop is added to fib6_info:
- nexthop_fib6_nh - return first fib6_nh in a nexthop object
- fib6_info_nh_dev moved to nexthop.h and updated to use nexthop_fib6_nh
if the fib6_info references a nexthop object
- nexthop_path_fib6_result - similar to ipv4, select a path within a
multipath nexthop object. If the nexthop is a blackhole, set
fib6_result type to RTN_BLACKHOLE, and set the REJECT flag
Update the fib6_info references to check for nh and take a different path
as needed:
- rt6_qualify_for_ecmp - if a fib entry uses a nexthop object it can NOT
be coalesced with other fib entries into a multipath route
- rt6_duplicate_nexthop - use nexthop_cmp if either fib6_info references
a nexthop
- addrconf (host routes), RA's and info entries (anything configured via
ndisc) does not use nexthop objects
- fib6_info_destroy_rcu - put reference to nexthop object
- fib6_purge_rt - drop fib6_info from f6i_list
- fib6_select_path - update to use the new nexthop_path_fib6_result when
fib entry uses a nexthop object
- rt6_device_match - update to catch use of nexthop object as a blackhole
and set fib6_type and flags.
- ip6_route_info_create - don't add space for fib6_nh if fib entry is
going to reference a nexthop object, take a reference to nexthop object,
disallow use of source routing
- rt6_nlmsg_size - add space for RTA_NH_ID
- add rt6_fill_node_nexthop to add nexthop data on a dump
As with ipv4, most of the changes push existing code into the else branch
of whether the fib entry uses a nexthop object.
Update the nexthop code to walk f6i_list on a nexthop deleted to remove
fib entries referencing it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 'struct nexthop' and nh_list list_head to fib_info. nh_list is the
fib_info side of the nexthop <-> fib_info relationship.
Add fi_list list_head to 'struct nexthop' to track fib_info entries
using a nexthop instance. Add __remove_nexthop_fib and add it to
__remove_nexthop to walk the new list_head and mark those fib entries
as dead when the nexthop is deleted.
Add a few nexthop helpers for use when a nexthop is added to fib_info:
- nexthop_cmp to determine if 2 nexthops are the same
- nexthop_path_fib_result to select a path for a multipath
'struct nexthop'
- nexthop_fib_nhc to select a specific fib_nh_common within a
multipath 'struct nexthop'
Update existing fib_info_nhc to use nexthop_fib_nhc if a fib_info uses
a 'struct nexthop', and mark fib_info_nh as only used for the non-nexthop
case.
Update the fib_info functions to check for fi->nh and take a different
path as needed:
- free_fib_info_rcu - put the nexthop object reference
- fib_release_info - remove the fib_info from the nexthop's fi_list
- nh_comp - use nexthop_cmp when either fib_info references a nexthop
object
- fib_info_hashfn - use the nexthop id for the hashing vs the oif of
each fib_nh in a fib_info
- fib_nlmsg_size - add space for the RTA_NH_ID attribute
- fib_create_info - verify nexthop reference can be taken, verify
nexthop spec is valid for fib entry, and add fib_info to fi_list for
a nexthop
- fib_select_multipath - use the new nexthop_path_fib_result to select a
path when nexthop objects are used
- fib_table_lookup - if the 'struct nexthop' is a blackhole nexthop, treat
it the same as a fib entry using 'blackhole'
The bulk of the changes are in fib_semantics.c and most of that is
moving the existing change_nexthops into an else branch.
Update the nexthop code to walk fi_list on a nexthop deleted to remove
fib entries referencing it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert more IPv4 code to use fib_nh_common over fib_nh to enable routes
to use a fib6_nh based nexthop. In the end, only code not using a
nexthop object in a fib_info should directly access fib_nh in a fib_info
without checking the famiy and going through fib_nh_common. Those
functions will be marked when it is not directly evident.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use helpers to access fib_nh and fib_nhs fields of a fib_info. Drop the
fib_dev macro which is an alias for the first nexthop. Replacements:
fi->fib_dev --> fib_info_nh(fi, 0)->fib_nh_dev
fi->fib_nh --> fib_info_nh(fi, 0)
fi->fib_nh[i] --> fib_info_nh(fi, i)
fi->fib_nhs --> fib_info_num_path(fi)
where fib_info_nh(fi, i) returns fi->fib_nh[nhsel] and fib_info_num_path
returns fi->fib_nhs.
Move the existing fib_info_nhc to nexthop.h and define the new ones
there. A later patch adds a check if a fib_info uses a nexthop object,
and defining the helpers in nexthop.h avoid circular header
dependencies.
After this all remaining open coded references to fi->fib_nhs and
fi->fib_nh are in:
- fib_create_info and helpers used to lookup an existing fib_info
entry, and
- the netdev event functions fib_sync_down_dev and fib_sync_up.
The latter two will not be reused for nexthops, and the fib_create_info
will be updated to handle a nexthop in a fib_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, packets received in another VRF should not be passed to an
unbound socket in the default VRF. This patch updates the IPv4 UDP
multicast logic to match the unicast VRF logic (in compute_score()),
as well as the IPv6 mcast logic (in __udp_v6_is_mcast_sock()).
The particular case I noticed was DHCP discover packets going
to the 255.255.255.255 address, which are handled by
__udp4_lib_mcast_deliver(). The previous code meant that running
multiple different DHCP server or relay agent instances across VRFs
did not work correctly - any server/relay agent in the default VRF
received DHCP discover packets for all other VRFs.
Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot triggered following splat when strict netlink
validation is enabled:
net/ipv4/devinet.c:1766 suspicious rcu_dereference_check() usage!
This occurs because we hold RTNL mutex, but no rcu read lock.
The second call site holds both, so just switch to the _rtnl variant.
Reported-by: syzbot+bad6e32808a3a97b1515@syzkaller.appspotmail.com
Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported nasty use-after-free [1]
Lets remove frag_list field from structs ip_fraglist_iter
and ip6_fraglist_iter. This seens not needed anyway.
[1] :
BUG: KASAN: use-after-free in kfree_skb_list+0x5d/0x60 net/core/skbuff.c:706
Read of size 8 at addr ffff888085a3cbc0 by task syz-executor303/8947
CPU: 0 PID: 8947 Comm: syz-executor303 Not tainted 5.2.0-rc2+ #12
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
__kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
kasan_report+0x12/0x20 mm/kasan/common.c:614
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
kfree_skb_list+0x5d/0x60 net/core/skbuff.c:706
ip6_fragment+0x1ef4/0x2680 net/ipv6/ip6_output.c:882
__ip6_finish_output+0x577/0xaa0 net/ipv6/ip6_output.c:144
ip6_finish_output+0x38/0x1f0 net/ipv6/ip6_output.c:156
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0x235/0x7f0 net/ipv6/ip6_output.c:179
dst_output include/net/dst.h:433 [inline]
ip6_local_out+0xbb/0x1b0 net/ipv6/output_core.c:179
ip6_send_skb+0xbb/0x350 net/ipv6/ip6_output.c:1796
ip6_push_pending_frames+0xc8/0xf0 net/ipv6/ip6_output.c:1816
rawv6_push_pending_frames net/ipv6/raw.c:617 [inline]
rawv6_sendmsg+0x2993/0x35e0 net/ipv6/raw.c:947
inet_sendmsg+0x141/0x5d0 net/ipv4/af_inet.c:802
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:671
___sys_sendmsg+0x803/0x920 net/socket.c:2292
__sys_sendmsg+0x105/0x1d0 net/socket.c:2330
__do_sys_sendmsg net/socket.c:2339 [inline]
__se_sys_sendmsg net/socket.c:2337 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2337
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x44add9
Code: e8 7c e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b 05 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f826f33bce8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006e7a18 RCX: 000000000044add9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00000000006e7a10 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006e7a1c
R13: 00007ffcec4f7ebf R14: 00007f826f33c9c0 R15: 20c49ba5e353f7cf
Allocated by task 8947:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_kmalloc mm/kasan/common.c:489 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:497
slab_post_alloc_hook mm/slab.h:437 [inline]
slab_alloc_node mm/slab.c:3269 [inline]
kmem_cache_alloc_node+0x131/0x710 mm/slab.c:3579
__alloc_skb+0xd5/0x5e0 net/core/skbuff.c:199
alloc_skb include/linux/skbuff.h:1058 [inline]
__ip6_append_data.isra.0+0x2a24/0x3640 net/ipv6/ip6_output.c:1519
ip6_append_data+0x1e5/0x320 net/ipv6/ip6_output.c:1688
rawv6_sendmsg+0x1467/0x35e0 net/ipv6/raw.c:940
inet_sendmsg+0x141/0x5d0 net/ipv4/af_inet.c:802
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:671
___sys_sendmsg+0x803/0x920 net/socket.c:2292
__sys_sendmsg+0x105/0x1d0 net/socket.c:2330
__do_sys_sendmsg net/socket.c:2339 [inline]
__se_sys_sendmsg net/socket.c:2337 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2337
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 8947:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
__cache_free mm/slab.c:3432 [inline]
kmem_cache_free+0x86/0x260 mm/slab.c:3698
kfree_skbmem net/core/skbuff.c:625 [inline]
kfree_skbmem+0xc5/0x150 net/core/skbuff.c:619
__kfree_skb net/core/skbuff.c:682 [inline]
kfree_skb net/core/skbuff.c:699 [inline]
kfree_skb+0xf0/0x390 net/core/skbuff.c:693
kfree_skb_list+0x44/0x60 net/core/skbuff.c:708
__dev_xmit_skb net/core/dev.c:3551 [inline]
__dev_queue_xmit+0x3034/0x36b0 net/core/dev.c:3850
dev_queue_xmit+0x18/0x20 net/core/dev.c:3914
neigh_direct_output+0x16/0x20 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x1034/0x2550 net/ipv6/ip6_output.c:120
ip6_fragment+0x1ebb/0x2680 net/ipv6/ip6_output.c:863
__ip6_finish_output+0x577/0xaa0 net/ipv6/ip6_output.c:144
ip6_finish_output+0x38/0x1f0 net/ipv6/ip6_output.c:156
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0x235/0x7f0 net/ipv6/ip6_output.c:179
dst_output include/net/dst.h:433 [inline]
ip6_local_out+0xbb/0x1b0 net/ipv6/output_core.c:179
ip6_send_skb+0xbb/0x350 net/ipv6/ip6_output.c:1796
ip6_push_pending_frames+0xc8/0xf0 net/ipv6/ip6_output.c:1816
rawv6_push_pending_frames net/ipv6/raw.c:617 [inline]
rawv6_sendmsg+0x2993/0x35e0 net/ipv6/raw.c:947
inet_sendmsg+0x141/0x5d0 net/ipv4/af_inet.c:802
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:671
___sys_sendmsg+0x803/0x920 net/socket.c:2292
__sys_sendmsg+0x105/0x1d0 net/socket.c:2330
__do_sys_sendmsg net/socket.c:2339 [inline]
__se_sys_sendmsg net/socket.c:2337 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2337
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff888085a3cbc0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 0 bytes inside of
224-byte region [ffff888085a3cbc0, ffff888085a3cca0)
The buggy address belongs to the page:
page:ffffea0002168f00 refcount:1 mapcount:0 mapping:ffff88821b6f63c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea00027bbf88 ffffea0002105b88 ffff88821b6f63c0
raw: 0000000000000000 ffff888085a3c080 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888085a3ca80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888085a3cb00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff888085a3cb80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff888085a3cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888085a3cc80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 0feca6190f88 ("net: ipv6: add skbuff fraglist splitter")
Fixes: c8b17be0b7a4 ("net: ipv4: add skbuff fraglist splitter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
this_cpu_read(*X) is slightly faster than *this_cpu_ptr(X)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
this_cpu_read(*X) is faster than *this_cpu_ptr(X)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ifa_list is protected by rcu, yet code doesn't reflect this.
Add the __rcu annotations and fix up all places that are now reported by
sparse.
I've done this in the same commit to not add intermediate patches that
result in new warnings.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use in_dev_for_each_ifa_rcu/rtnl instead.
This prevents sparse warnings once proper __rcu annotations are added.
Signed-off-by: Florian Westphal <fw@strlen.de>
t di# Last commands done (6 commands done):
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netfilter hooks are always running under rcu read lock, use
the new iterator macro so sparse won't complain once we add
proper __rcu annotations.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This also replaces spots that used for_primary_ifa().
for_primary_ifa() aborts the loop on the first secondary address seen.
Replace it with either the rcu or rtnl variant of in_dev_for_each_ifa(),
but two places will now also consider secondary addresses too:
inet_addr_onlink() and inet_ifa_byprefix().
I do not understand why they should ignore secondary addresses.
Why would a secondary address not be considered 'on link'?
When matching a prefix, why ignore a matching secondary address?
Other places get converted as well, but gain "->flags & SECONDARY" check.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ifa_list is protected either by rcu or rtnl lock, but the
current iterators do not account for this.
This adds two iterators as replacement, a later patch in
the series will update them with the needed rcu/rtnl_dereference calls.
Its not done in this patch yet to avoid sparse warnings -- the fields
lack the proper __rcu annotation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset container Netfilter/IPVS update for net-next:
1) Add UDP tunnel support for ICMP errors in IPVS.
Julian Anastasov says:
This patchset is a followup to the commit that adds UDP/GUE tunnel:
"ipvs: allow tunneling with gue encapsulation".
What we do is to put tunnel real servers in hash table (patch 1),
add function to lookup tunnels (patch 2) and use it to strip the
embedded tunnel headers from ICMP errors (patch 3).
2) Extend xt_owner to match for supplementary groups, from
Lukasz Pawelczyk.
3) Remove unused oif field in flow_offload_tuple object, from
Taehee Yoo.
4) Release basechain counters from workqueue to skip synchronize_rcu()
call. From Florian Westphal.
5) Replace skb_make_writable() by skb_ensure_writable(). Patchset
from Florian Westphal.
6) Checksum support for gue encapsulation in IPVS, from Jacky Hu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-05-31
The following pull-request contains BPF updates for your *net-next* tree.
Lots of exciting new features in the first PR of this developement cycle!
The main changes are:
1) misc verifier improvements, from Alexei.
2) bpftool can now convert btf to valid C, from Andrii.
3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
This feature greatly improves BPF speed on 32-bit architectures. From Jiong.
4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
bpf programs got stuck in dying cgroups. From Roman.
5) new bpf_send_signal() helper, from Yonghong.
6) cgroup inet skb programs can signal CN to the stack, from Lawrence.
7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update BPF_CGROUP_RUN_PROG_INET_EGRESS() callers to support returning
congestion notifications from the BPF programs.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The variable err is initialized with a value that is never read
and err is reassigned a few statements later. This initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()
On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
.. so skb_make_writable can be removed soon.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review
and analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
...
|
|
TCP zerocopy takes a uarg reference for every skb, plus one for the
tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero
as it builds, sends and frees skbs inside its inner loop.
UDP and RAW zerocopy do not send inside the inner loop so do not need
the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit
52900d22288ed ("udp: elide zerocopy operation in hot path") introduced
extra_uref to pass the initial reference taken in sock_zerocopy_alloc
to the first generated skb.
But, sock_zerocopy_realloc takes this extra reference at the start of
every call. With MSG_MORE, no new skb may be generated to attach the
extra_uref to, so refcnt is incorrectly 2 with only one skb.
Do not take the extra ref if uarg && !tcp, which implies MSG_MORE.
Update extra_uref accordingly.
This conditional assignment triggers a false positive may be used
uninitialized warning, so have to initialize extra_uref at define.
Changes v1->v2: fix typo in Fixes SHA1
Fixes: 52900d22288e7 ("udp: elide zerocopy operation in hot path")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
af_inet sets sock->sk to NULL which trips strparser over:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.2.0-rc1-00139-g14629453a6d3 #21
RIP: 0010:tcp_peek_len+0x10/0x60
RSP: 0018:ffffc02e41c54b98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9cf924c4e030 RCX: 0000000000000051
RDX: 0000000000000000 RSI: 000000000000000c RDI: ffff9cf97128f480
RBP: ffff9cf9365e0300 R08: ffff9cf94fe7d2c0 R09: 0000000000000000
R10: 000000000000036b R11: ffff9cf939735e00 R12: ffff9cf91ad9ae40
R13: ffff9cf924c4e000 R14: ffff9cf9a8fcbaae R15: 0000000000000020
FS: 0000000000000000(0000) GS:ffff9cf9af7c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 000000013920a003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
strp_data_ready+0x48/0x90
tls_data_ready+0x22/0xd0 [tls]
tcp_rcv_established+0x569/0x620
tcp_v4_do_rcv+0x127/0x1e0
tcp_v4_rcv+0xad7/0xbf0
ip_protocol_deliver_rcu+0x2c/0x1c0
ip_local_deliver_finish+0x41/0x50
ip_local_deliver+0x6b/0xe0
? ip_protocol_deliver_rcu+0x1c0/0x1c0
ip_rcv+0x52/0xd0
? ip_rcv_finish_core.isra.20+0x380/0x380
__netif_receive_skb_one_core+0x7e/0x90
netif_receive_skb_internal+0x42/0xf0
napi_gro_receive+0xed/0x150
nfp_net_poll+0x7a2/0xd30 [nfp]
? kmem_cache_free_bulk+0x286/0x310
net_rx_action+0x149/0x3b0
__do_softirq+0xe3/0x30a
? handle_irq_event_percpu+0x6a/0x80
irq_exit+0xe8/0xf0
do_IRQ+0x85/0xd0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0010:cpuidle_enter_state+0xbc/0x450
To avoid this issue set sock->sk after sk_prot->close.
My grepping and testing did not discover any code which
would depend on the current behaviour.
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Deal with the IPCB() area away from the iterators.
The bridge codebase has its own control buffer layout, move specific
IP control buffer handling into the IPv4 codepath.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch exposes a new API to refragment a skbuff. This allows you to
split either a linear skbuff or to force the refragmentation of an
existing fraglist using a different mtu. The API consists of:
* ip_frag_init(), that initializes the internal state of the transformer.
* ip_frag_next(), that allows you to fetch the next fragment. This function
internally allocates the skbuff that represents the fragment, it pushes
the IPv4 header, and it also copies the payload for each fragment.
The ip_frag_state object stores the internal state of the splitter.
This code has been extracted from ip_do_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the skbuff fraglist splitter. This API provides an
iterator to transform the fraglist into single skbuff objects, it
consists of:
* ip_fraglist_init(), that initializes the internal state of the
fraglist splitter.
* ip_fraglist_prepare(), that restores the IPv4 header on the
fragments.
* ip_fraglist_next(), that retrieves the fragment from the fraglist and
it updates the internal state of the splitter to point to the next
fragment skbuff in the fraglist.
The ip_fraglist_iter object stores the internal state of the iterator.
This code has been extracted from ip_do_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the ability to add a backup TFO key as:
# echo "x-x-x-x,x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
The key before the comma acks as the primary TFO key and the key after the
comma is the backup TFO key. This change is intended to be backwards
compatible since if only one key is set, userspace will simply read back
that single key as follows:
# echo "x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
x-x-x-x
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for get/set of an optional backup key via TCP_FASTOPEN_KEY, in
addition to the current 'primary' key. The primary key is used to encrypt
and decrypt TFO cookies, while the backup is only used to decrypt TFO
cookies. The backup key is used to maximize successful TFO connections when
TFO keys are rotated.
Currently, TCP_FASTOPEN_KEY allows a single 16-byte primary key to be set.
This patch now allows a 32-byte value to be set, where the first 16 bytes
are used as the primary key and the second 16 bytes are used for the backup
key. Similarly, for getsockopt(), we can receive a 32-byte value as output
if requested. If a 16-byte value is used to set the primary key via
TCP_FASTOPEN_KEY, then any previously set backup key will be removed.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We would like to be able to rotate TFO keys while minimizing the number of
client cookies that are rejected. Currently, we have only one key which can
be used to generate and validate cookies, thus if we simply replace this
key clients can easily have cookies rejected upon rotation.
We propose having the ability to have both a primary key and a backup key.
The primary key is used to generate as well as to validate cookies.
The backup is only used to validate cookies. Thus, keys can be rotated as:
1) generate new key
2) add new key as the backup key
3) swap the primary and backup key, thus setting the new key as the primary
We don't simply set the new key as the primary key and move the old key to
the backup slot because the ip may be behind a load balancer and we further
allow for the fact that all machines behind the load balancer will not be
updated simultaneously.
We make use of this infrastructure in subsequent patches.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Restructure __tcp_fastopen_cookie_gen() to take a 'struct crypto_cipher'
argument and rename it as __tcp_fastopen_cookie_gen_cipher(). Subsequent
patches will provide different ciphers based on which key is being used for
the cookie generation.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TCP option parsing routines in tcp_parse_options function could
read one byte out of the buffer of the TCP options.
1 while (length > 0) {
2 int opcode = *ptr++;
3 int opsize;
4
5 switch (opcode) {
6 case TCPOPT_EOL:
7 return;
8 case TCPOPT_NOP: /* Ref: RFC 793 section 3.1 */
9 length--;
10 continue;
11 default:
12 opsize = *ptr++; //out of bound access
If length = 1, then there is an access in line2.
And another access is occurred in line 12.
This would lead to out-of-bound access.
Therefore, in the patch we check that the available data length is
larger enough to pase both TCP option code and size.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The smp_store_release call in fqdir_exit cannot protect the setting
of fqdir->dead as claimed because its memory barrier is only
guaranteed to be one-way and the barrier precedes the setting of
fqdir->dead.
IOW it doesn't provide any barriers between fq->dir and the following
hash table destruction.
In fact, the code is safe anyway because call_rcu does provide both
the memory barrier as well as a guarantee that when the destruction
work starts executing all RCU readers will see the updated value for
fqdir->dead.
Therefore this patch removes the unnecessary smp_store_release call
as well as the corresponding READ_ONCE on the read-side in order to
not confuse future readers of this code. Comments have been added
in their places.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow the creation of nexthop groups which reference other nexthop
objects to create multipath routes:
+--------------+
+------------+ +--------------+ |
| nh nh_grp --->| nh_grp_entry |-+
+------------+ +---------|----+
^ | | +------------+
+----------------+ +--->| nh, weight |
nh_parent +------------+
A group entry points to a nexthop with a weight for that hop within the
group. The nexthop has a list_head, grp_list, for tracking which groups
it is a member of and the group entry has a reference back to the parent.
The grp_list is used when a nexthop is deleted - to efficiently remove
it from groups using it.
If a nexthop group spec is given, no other attributes can be set. Each
nexthop id in a group spec must already exist.
Similar to single nexthops, the specification of a nexthop group can be
updated so that data is managed with rcu locking.
Add path selection function to account for multiple paths and add
ipv{4,6}_good_nh helpers to know that if a neighbor entry exists it is
in a good state.
Update NETDEV event handling to rebalance multipath nexthop groups if
a nexthop is deleted due to a link event (down or unregister).
When a nexthop is removed any groups using it are updated. Groups using a
nexthop a tracked via a grp_list.
Nexthop dumps can be limited to groups only by adding NHA_GROUPS to the
request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for NHA_ENCAP and NHA_ENCAP_TYPE. Leverages the existing code
for lwtunnel within fib_nh_common, so the only change needed is handling
the attributes in the nexthop code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handle IPv6 gateway in a nexthop spec. If nh_family is set to AF_INET6,
NHA_GATEWAY is expected to be an IPv6 address. Add ipv6 option to gw in
nh_config to hold the address, add fib6_nh to nh_info to leverage the
ipv6 initialization and cleanup code. Update nh_fill_node to dump the v6
address.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for IPv4 nexthops. If nh_family is set to AF_INET, then
NHA_GATEWAY is expected to be an IPv4 address.
Register for netdev events to be notified of admin up/down changes as
well as deletes. A hash table is used to track nexthop per devices to
quickly convert device events to the affected nexthops.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Barebones start point for nexthops. Implementation for RTM commands,
notifications, management of rbtree for holding nexthops by id, and
kernel side data structures for nexthops and nexthop config.
Nexthops are maintained in an rbtree sorted by id. Similar to routes,
nexthops are configured per namespace using netns_nexthop struct added
to struct net.
Nexthop notifications are sent when a nexthop is added or deleted,
but NOT if the delete is due to a device event or network namespace
teardown (which also involves device events). Applications are
expected to use the device down event to flush nexthops and any
routes used by the nexthops.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Eric Dumazet
David Ahern
YueHaibing
David S. Miller
Linus Torvalds
Zhiqiang Liu
Xin Long
Enrico Weigelt
Tim Beale
Florian Westphal
brakmo
Colin Ian King
Willem de Bruijn
Jakub Kicinski
Pablo Neira Ayuso
Jason Baron
Christoph Paasch
Young Xiao
Herbert Xu
Thomas Gleixner