aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/addrconf.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-20ipv6: properly prevent temp_prefered_lft sysctl raceJiri Bohac1-5/+4
The check for an underflow of tmp_prefered_lft is always false because tmp_prefered_lft is unsigned. The intention of the check was to guard against racing with an update of the temp_prefered_lft sysctl, potentially resulting in an underflow. As suggested by David Miller, the best way to prevent the race is by reading the sysctl variable using READ_ONCE. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14IPv6: fix DESYNC_FACTORJiri Bohac1-8/+31
The IPv6 temporary address generation uses a variable called DESYNC_FACTOR to prevent hosts updating the addresses at the same time. Quoting RFC 4941: ... The value DESYNC_FACTOR is a random value (different for each client) that ensures that clients don't synchronize with each other and generate new addresses at exactly the same time ... DESYNC_FACTOR is defined as: DESYNC_FACTOR -- A random value within the range 0 - MAX_DESYNC_FACTOR. It is computed once at system start (rather than each time it is used) and must never be greater than (TEMP_VALID_LIFETIME - REGEN_ADVANCE). First, I believe the RFC has a typo in it and meant to say: "and must never be greater than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE)" The reason is that at various places in the RFC, DESYNC_FACTOR is used in a calculation like (TEMP_PREFERRED_LIFETIME - DESYNC_FACTOR) or (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE - DESYNC_FACTOR). It needs to be smaller than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE) for the result of these calculations to be larger than zero. It's never used in a calculation together with TEMP_VALID_LIFETIME. I already submitted an errata to the rfc-editor: https://www.rfc-editor.org/errata_search.php?rfc=4941 The Linux implementation of DESYNC_FACTOR is very wrong: max_desync_factor is used in places DESYNC_FACTOR should be used. max_desync_factor is initialized to the RFC-recommended value for MAX_DESYNC_FACTOR (600) but the whole point is to get a _random_ value. And nothing ensures that the value used is not greater than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE), which leads to underflows. The effect can easily be observed when setting the temp_prefered_lft sysctl e.g. to 60. The preferred lifetime of the temporary addresses will be bogus. TEMP_PREFERRED_LIFETIME and REGEN_ADVANCE are not constants and can be influenced by these three sysctls: regen_max_retry, dad_transmits and temp_prefered_lft. Thus, the upper bound for desync_factor needs to be re-calculated each time a new address is generated and if desync_factor is larger than the new upper bound, a new random value needs to be re-generated. And since we already have max_desync_factor configurable per interface, we also need to calculate and store desync_factor per interface. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14IPv6: Drop the temporary address regen_timerJiri Bohac1-52/+9
The randomized interface identifier (rndid) was periodically updated from the regen_timer timer. Simplify the code by updating the rndid only when needed by ipv6_try_regen_rndid(). This makes the follow-up DESYNC_FACTOR fix much simpler. Also it fixes a reference counting error in this error path, where an in6_dev_put was missing: err = addrconf_sysctl_register(ndev); if (err) { ipv6_mc_destroy_dev(ndev); - del_timer(&ndev->regen_timer); snmp6_unregister_dev(ndev); goto err_release; Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14ipv6: correctly add local routes when lo goes upNicolas Dichtel1-1/+1
The goal of the patch is to fix this scenario: ip link add dummy1 type dummy ip link set dummy1 up ip link set lo down ; ip link set lo up After that sequence, the local route to the link layer address of dummy1 is not there anymore. When the loopback is set down, all local routes are deleted by addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still exists, because the corresponding idev has a reference on it. After the rcu grace period, dst_rcu_free() is called, and thus ___dst_free(), which will set obsolete to DST_OBSOLETE_DEAD. In this case, init_loopback() is called before dst_rcu_free(), thus obsolete is still sets to something <= 0. So, the function doesn't add the route again. To avoid that race, let's check the rt6 refcnt instead. Fixes: 25fb6ca4ed9c ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f625c ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113b110 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by: Francesco Santoro <francesco.santoro@6wind.com> Reported-by: Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07ipv6 addrconf: disallow rtr_solicits < -1Maciej Żenczykowski1-1/+3
This disallows setting /proc/sys/net/ipv6/conf/*/router_solicitations to values below -1. -1 continues to mean an unlimited number of retransmits. Note: this depends on 'ipv6 addrconf: remove addrconf_sysctl_hop_limit()' Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02ipv6 addrconf: remove addrconf_sysctl_hop_limit()Maciej Żenczykowski1-17/+14
This is an effective no-op in terms of user observable behaviour. By preventing the overwrite of non-null extra1/extra2 fields in addrconf_sysctl() we can enable the use of proc_dointvec_minmax(). This allows us to eliminate the constant min/max (1..255) trampoline function that is addrconf_sysctl_hop_limit(). This is nice because it simplifies the code, and allows future sysctls with constant min/max limits to also not require trampolines. We still can't eliminate the trampoline for mtu because it isn't actually a constant (it depends on other tunables of the device) and thus requires at-write-time logic to enforce range. Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Erik Kline <ek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30ipv6 addrconf: implement RFC7559 router solicitation backoffMaciej Żenczykowski1-7/+44
This implements: https://tools.ietf.org/html/rfc7559 Backoff is performed according to RFC3315 section 14: https://tools.ietf.org/html/rfc3315#section-14 We allow setting /proc/sys/net/ipv6/conf/*/router_solicitations to a negative value meaning an unlimited number of retransmits, and we make this the new default (inline with the RFC). We also add a new setting: /proc/sys/net/ipv6/conf/*/router_solicitation_max_interval defaulting to 1 hour (per RFC recommendation). Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Erik Kline <ek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30ipv6: Remove useless parameter in __snmp6_fill_statsdevJia He1-6/+6
The parameter items(is always ICMP6_MIB_MAX) is useless for __snmp6_fill_statsdev Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06ipv6: addrconf: fix dev refcont leak when DAD failedWei Yongjun1-0/+2
In general, when DAD detected IPv6 duplicate address, ifp->state will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a delayed work, the call tree should be like this: ndisc_recv_ns -> addrconf_dad_failure <- missing ifp put -> addrconf_mod_dad_work -> schedule addrconf_dad_work() -> addrconf_dad_stop() <- missing ifp hold before call it addrconf_dad_failure() called with ifp refcont holding but not put. addrconf_dad_work() call addrconf_dad_stop() without extra holding refcount. This will not cause any issue normally. But the race between addrconf_dad_failure() and addrconf_dad_work() may cause ifp refcount leak and netdevice can not be unregister, dmesg show the following messages: IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected! ... unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Cc: stable@vger.kernel.org Fixes: c15b1ccadb32 ("ipv6: move DAD and addrconf_verify processing to workqueue") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01netconf: add a notif when settings are createdNicolas Dichtel1-1/+8
All changes are notified, but the initial state was missing. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01ipv6: add missing netconf notif when 'all' is updatedNicolas Dichtel1-0/+7
The 'default' value was not advertised. Fixes: f3a1bfb11ccb ("rtnl/ipv6: use netconf msg to advertise forwarding status") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22net: ipv6: Remove addresses for failures with strict DADMike Manning1-13/+21
If DAD fails with accept_dad set to 2, global addresses and host routes are incorrectly left in place. Even though disable_ipv6 is set, contrary to documentation, the addresses are not dynamically deleted from the interface. It is only on a subsequent link down/up that these are removed. The fix is not only to set the disable_ipv6 flag, but also to call addrconf_ifdown(), which is the action to carry out when disabling IPv6. This results in the addresses and routes being deleted immediately. The DAD failure for the LL addr is determined as before via netlink, or by the absence of the LL addr (which also previously would have had to be checked for in case of an intervening link down and up). As the call to addrconf_ifdown() requires an rtnl lock, the logic to disable IPv6 when DAD fails is moved to addrconf_dad_work(). Previous behavior: root@vm1:/# sysctl net.ipv6.conf.eth3.accept_dad=2 net.ipv6.conf.eth3.accept_dad = 2 root@vm1:/# ip -6 addr add 2000::10/64 dev eth3 root@vm1:/# ip link set up eth3 root@vm1:/# ip -6 addr show dev eth3 5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2000::10/64 scope global valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe43:dd5a/64 scope link tentative dadfailed valid_lft forever preferred_lft forever root@vm1:/# ip -6 route show dev eth3 2000::/64 proto kernel metric 256 fe80::/64 proto kernel metric 256 root@vm1:/# ip link set down eth3 root@vm1:/# ip link set up eth3 root@vm1:/# ip -6 addr show dev eth3 root@vm1:/# ip -6 route show dev eth3 root@vm1:/# New behavior: root@vm1:/# sysctl net.ipv6.conf.eth3.accept_dad=2 net.ipv6.conf.eth3.accept_dad = 2 root@vm1:/# ip -6 addr add 2000::10/64 dev eth3 root@vm1:/# ip link set up eth3 root@vm1:/# ip -6 addr show dev eth3 root@vm1:/# ip -6 route show dev eth3 root@vm1:/# Signed-off-by: Mike Manning <mmanning@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: ipv6: Do not keep IPv6 addresses when IPv6 is disabledMike Manning1-2/+2
If IPv6 is disabled when the option is set to keep IPv6 addresses on link down, userspace is unaware of this as there is no such indication via netlink. The solution is to remove the IPv6 addresses in this case, which results in netlink messages indicating removal of addresses in the usual manner. This fix also makes the behavior consistent with the case of having IPv6 disabled first, which stops IPv6 addresses from being added. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Mike Manning <mmanning@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30net: ipv6: use list_move instead of list_del/list_addWei Yongjun1-2/+1
Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net: ipv6: Always leave anycast and multicast groups on link downMike Manning1-0/+4
Default kernel behavior is to delete IPv6 addresses on link down, which entails deletion of the multicast and the subnet-router anycast addresses. These deletions do not happen with sysctl setting to keep global IPv6 addresses on link down, so every link down/up causes an increment of the anycast and multicast refcounts. These bogus refcounts may stop these addrs from being removed on subsequent calls to delete them. The solution is to leave the groups for the multicast and subnet anycast on link down for the callflow when global IPv6 addresses are kept. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Mike Manning <mmanning@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-09ipv6: do not abuse GFP_ATOMIC in inet6_netconf_notify_devconf()Eric Dumazet1-2/+2
All inet6_netconf_notify_devconf() callers are in process context, so we can use GFP_KERNEL allocations if we take care of not holding a rwlock while not needed in ip6mr (we hold RTNL there) Fixes: d67b8c616b48 ("netconf: advertise mc_forwarding status") Fixes: f3a1bfb11ccb ("rtnl/ipv6: use netconf msg to advertise forwarding status") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: ipv6: Address selection needs to consider L3 domainsDavid Ahern1-0/+48
IPv6 version of 3f2fb9a834cb ("net: l3mdev: address selection should only consider devices in L3 domain") and the follow up commit, a17b693cdd876 ("net: l3mdev: prefer VRF master for source address selection"). That is, if outbound device is given then the address preference order is an address from that device, an address from the master device if it is enslaved, and then an address from a device in the same L3 domain. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ipv6: export several functionsAlexander Aring1-8/+7
This patch exports some neighbour discovery functions which can be used by 6lowpan neighbour discovery ops functionality then. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ipv6: introduce neighbour discovery opsAlexander Aring1-1/+12
This patch introduces neighbour discovery ops callback structure. The idea is to separate the handling for 6LoWPAN into the 6lowpan module. These callback offers 6lowpan different handling, such as 802.15.4 short address handling or RFC6775 (Neighbor Discovery Optimization for IPv6 over 6LoWPANs). Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15addrconf: put prefix address add in an own functionAlexander Aring1-94/+109
This patch moves the functionality to add a RA PIO prefix generated address in an own function. This move prepares to add a hook for adding a second address for a second link-layer address. E.g. short address for 802.15.4 6LoWPAN. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-156lowpan: add 802.15.4 short addr slaacAlexander Aring1-2/+3
This patch adds the autoconfiguration if a valid 802.15.4 short address is available for 802.15.4 6LoWPAN interfaces. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15net: ipv6: Do not add multicast route for l3 master devicesDavid Ahern1-1/+1
L3 master devices are virtual devices similar to the loopback device. Link local and multicast routes for these devices do not make sense. The ipv6 addrconf code already skips adding a linklocal address; do the same for the mcast route. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-33/+15
Minor overlapping changes in the conflicts. In the macsec case, the change of the default ID macro name overlapped with the 64-bit netlink attribute alignment fixes in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net: ipv6: Delete host routes on an ifdownDavid Ahern1-33/+15
It was a simple idea -- save IPv6 configured addresses on a link down so that IPv6 behaves similar to IPv4. As always the devil is in the details and the IPv6 stack as too many behavioral differences from IPv4 making the simple idea more complicated than it needs to be. The current implementation for keeping IPv6 addresses can panic or spit out a warning in one of many paths: 1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in rt6_fill_node while handling a route dump request. 2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in fib6_del 3. Panic in fib6_purge_rt because rt6i_ref count is not 1. The root cause of all these is references related to the host route for an address that is retained. So, this patch deletes the host route every time the ifdown loop runs. Since the host route is deleted and will be re-generated an up there is no longer a need for the l3mdev fix up. On the 'admin up' side move addrconf_permanent_addr into the NETDEV_UP event handling so that it runs only once versus on UP and CHANGE events. All of the current panics and warnings appear to be related to addresses on the loopback device, but given the catastrophic nature when a bug is triggered this patch takes the conservative approach and evicts all host routes rather than trying to determine when it can be re-used and when it can not. That can be a later optimizaton if desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Revert "ipv6: Revert optional address flusing on ifdown."David S. Miller1-12/+150
This reverts commit 841645b5f2dfceac69b78fcd0c9050868d41ea61. Ok, this puts the feature back. I've decided to apply David A.'s bug fix and run with that rather than make everyone wait another whole release for this feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ipv6: Revert optional address flusing on ifdown.David S. Miller1-150/+12
This reverts the following three commits: 70af921db6f8835f4b11c65731116560adb00c14 799977d9aafbf0ca0b9c39b04cbfb16db71302c9 f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac The feature was ill conceived, has terrible semantics, and has added nothing but regressions to the already fragile ipv6 stack. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+20
Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19net/ipv6/addrconf: fix sysctl table indentationKonstantin Khlebnikov1-309/+307
Separated from previous patch for readability. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19net/ipv6/addrconf: simplify sysctl registrationKonstantin Khlebnikov1-26/+17
Struct ctl_table_header holds pointer to sysctl table which could be used for freeing it after unregistration. IPv4 sysctls already use that. Remove redundant NULL assignment: ndev allocated using kzalloc. This also saves some bytes: sysctl table could be shorter than DEVCONF_MAX+1 if some options are disable in config. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: ipv6: Do not keep linklocal and loopback addressesDavid Ahern1-2/+10
f1705ec197e7 added the option to retain user configured addresses on an admin down. A comment to one of the later revisions suggested using the IFA_F_PERMANENT flag rather than adding a user_managed boolean to the ifaddr struct. A side effect of this change is that link local and loopback addresses are also retained which is not part of the objective of f1705ec197e7. Add check to drop those addresses. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13ipv6, token: allow for clearing the current device tokenDaniel Borkmann1-4/+6
The original tokenized iid support implemented via f53adae4eae5 ("net: ipv6: add tokenized interface identifier support") didn't allow for clearing a device token as it was intended that this addressing mode was the only one active for globally scoped IPv6 addresses. Later we relaxed that restriction via 617fe29d45bd ("net: ipv6: only invalidate previously tokenized addresses"), and we should also allow for clearing tokens as there's no good reason why it shouldn't be allowed. Fixes: 617fe29d45bd ("net: ipv6: only invalidate previously tokenized addresses") Reported-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11net: vrf: Fix dev refcnt leak due to IPv6 prefix routeDavid Ahern1-0/+10
ifupdown2 found a kernel bug with IPv6 routes and movement from the main table to the VRF table. Sequence of events: Create the interface and add addresses: ip link add dev eth4.105 link eth4 type vlan id 105 ip addr add dev eth4.105 8.105.105.10/24 ip -6 addr add dev eth4.105 2008:105:105::10/64 At this point IPv6 has inserted a prefix route in the main table even though the interface is 'down'. From there the VRF device is created: ip link add dev vrf105 type vrf table 105 ip addr add dev vrf105 9.9.105.10/32 ip -6 addr add dev vrf105 2000:9:105::10/128 ip link set vrf105 up Then the interface is enslaved, while still in the 'down' state: ip link set dev eth4.105 master vrf105 Since the device is down the VRF driver cycling the device does not send the NETDEV_UP and NETDEV_DOWN but rather the NETDEV_CHANGE event which does not flush the routes inserted prior. When the link is brought up ip link set dev eth4.105 up the prefix route is added in the VRF table, but does not remove the route from the main table. Fix by handling the NETDEV_CHANGEUPPER event similar what was implemented for IPv4 in 7f49e7a38b77 ("net: Flush local routes when device changes vrf association") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13netconf: add macro to represent all attributesZhang Shengju1-15/+21
This patch adds macro NETCONFA_ALL to represent all type of netconf attributes for IPv4 and IPv6. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: ipv6: Fix refcnt on host routesDavid Ahern1-5/+3
Andrew and Ying Huang's test robot both reported usage count problems that trace back to the 'keep address on ifdown' patch. >From Andrew: We execute CRIU test on linux-next. On the current linux-next kernel they hangs on creating a network namespace. The kernel log contains many massages like this: [ 1036.122108] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 1046.165156] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 1056.210287] unregister_netdevice: waiting for lo to become free. Usage count = 2 I tried to revert this patch and the bug disappeared. Here is a set of commands to reproduce this bug: [root@linux-next-test linux-next]# uname -a Linux linux-next-test 4.5.0-rc6-next-20160301+ #3 SMP Wed Mar 2 17:32:18 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@linux-next-test ~]# unshare -n [root@linux-next-test ~]# ip link set up dev lo [root@linux-next-test ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever [root@linux-next-test ~]# logout [root@linux-next-test ~]# unshare -n ----- The problem is a change made to RTM_DELADDR case in __ipv6_ifa_notify that was added in an early version of the offending patch and is no longer needed. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Cc: Andrey Wagin <avagin@gmail.com> Cc: Ying Huang <ying.huang@linux.intel.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: ipv6/l3mdev: Move host route on saved address if necessaryDavid Ahern1-0/+26
Commit f1705ec197e70 allows IPv6 addresses to be retained on a link down. The address can have a cached host route which can point to the wrong FIB table if the L3 enslavement is changed (e.g., route can point to local table instead of VRF table if device is added to an L3 domain). On link up check the table of the cached host route against the FIB table associated with the device and correct if needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: ipv6: Make address flushing on ifdown optionalDavid Ahern1-15/+121
Currently, all ipv6 addresses are flushed when the interface is configured down, including global, static addresses: $ ip -6 addr show dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000 inet6 2100:1::2/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link valid_lft forever preferred_lft forever $ ip link set dev eth1 down $ ip -6 addr show dev eth1 << nothing; all addresses have been flushed>> Add a new sysctl to make this behavior optional. The new setting defaults to flush all addresses to maintain backwards compatibility. When the set global addresses with no expire times are not flushed on an admin down. The sysctl is per-interface or system-wide for all interfaces $ sysctl -w net.ipv6.conf.eth1.keep_addr_on_down=1 or $ sysctl -w net.ipv6.conf.all.keep_addr_on_down=1 Will keep addresses on eth1 on an admin down. $ ip -6 addr show dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000 inet6 2100:1::2/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link valid_lft forever preferred_lft forever $ ip link set dev eth1 down $ ip -6 addr show dev eth1 3: eth1: <BROADCAST,MULTICAST> mtu 1500 state DOWN qlen 1000 inet6 2100:1::2/120 scope global tentative valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link tentative valid_lft forever preferred_lft forever Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19rtnl: RTM_GETNETCONF: fix wrong return valueAnton Protopopov1-1/+1
An error response from a RTM_GETNETCONF request can return the positive error value EINVAL in the struct nlmsgerr that can mislead userspace. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ipv6: add option to drop unsolicited neighbor advertisementsJohannes Berg1-0/+8
In certain 802.11 wireless deployments, there will be NA proxies that use knowledge of the network to correctly answer requests. To prevent unsolicitd advertisements on the shared medium from being a problem, on such deployments wireless needs to drop them. Enable this by providing an option called "drop_unsolicited_na". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ipv6: add option to drop unicast encapsulated in L2 multicastJohannes Berg1-0/+8
In order to solve a problem with 802.11, the so-called hole-196 attack, add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if enabled, causes the stack to drop IPv6 unicast packets encapsulated in link-layer multi- or broadcast frames. Such frames can (as an attack) be created by any member of the same wireless network and transmitted as valid encrypted frames since the symmetric key for broadcast frames is shared between all stations. Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06ipv6: addrconf: Fix recursive spin lock callsubashab@codeaurora.org1-1/+4
A rcu stall with the following backtrace was seen on a system with forwarding, optimistic_dad and use_optimistic set. To reproduce, set these flags and allow ipv6 autoconf. This occurs because the device write_lock is acquired while already holding the read_lock. Back trace below - INFO: rcu_preempt self-detected stall on CPU { 1} (t=2100 jiffies g=3992 c=3991 q=4471) <6> Task dump for CPU 1: <2> kworker/1:0 R running task 12168 15 2 0x00000002 <2> Workqueue: ipv6_addrconf addrconf_dad_work <6> Call trace: <2> [<ffffffc000084da8>] el1_irq+0x68/0xdc <2> [<ffffffc000cc4e0c>] _raw_write_lock_bh+0x20/0x30 <2> [<ffffffc000bc5dd8>] __ipv6_dev_ac_inc+0x64/0x1b4 <2> [<ffffffc000bcbd2c>] addrconf_join_anycast+0x9c/0xc4 <2> [<ffffffc000bcf9f0>] __ipv6_ifa_notify+0x160/0x29c <2> [<ffffffc000bcfb7c>] ipv6_ifa_notify+0x50/0x70 <2> [<ffffffc000bd035c>] addrconf_dad_work+0x314/0x334 <2> [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc <2> [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 <2> [<ffffffc0000bb40c>] kthread+0xe0/0xec v2: do addrconf_dad_kick inside read lock and then acquire write lock for ipv6_ifa_notify as suggested by Eric Fixes: 7fd2561e4ebdd ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates") Cc: Eric Dumazet <edumazet@google.com> Cc: Erik Kline <ek@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10ipv6: always add flag an address that failed DAD with DADFAILEDLubomir Rintel1-2/+3
The userspace needs to know why is the address being removed so that it can perhaps obtain a new address. Without the DADFAILED flag it's impossible to distinguish removal of a temporary and tentative address due to DAD failure from other reasons (device removed, manual address removal). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+4
2015-12-22addrconf: always initialize sysctl table dataWANG Cong1-7/+4
When sysctl performs restrict writes, it allows to write from a middle position of a sysctl file, which requires us to initialize the table data before calling proc_dostring() for the write case. Fixes: 3d1bec99320d ("ipv6: introduce secret_stable to ipv6_devconf") Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-18ipv6: addrconf: use stable address generator for ARPHRD_NONEBjørn Mork1-6/+39
Add a new address generator mode, using the stable address generator with an automatically generated secret. This is intended as a default address generator mode for device types with no EUI64 implementation. The new generator is used for ARPHRD_NONE interfaces initially, adding default IPv6 autoconf support to e.g. tun interfaces. If the addrgenmode is set to 'random', either by default or manually, and no stable secret is available, then a random secret is used as input for the stable-privacy address generator. The secret can be read and modified like manually configured secrets, using the proc interface. Modifying the secret will change the addrgen mode to 'stable-privacy' to indicate that it operates on a known secret. Existing behaviour of the 'stable-privacy' mode is kept unchanged. If a known secret is available when the device is created, then the mode will default to 'stable-privacy' as before. The mode can be manually set to 'random' but it will behave exactly like 'stable-privacy' in this case. The secret will not change. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: 吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+7
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ipv6: automatically enable stable privacy mode if stable_secret setHannes Frederic Sowa1-0/+6
Bjørn reported that while we switch all interfaces to privacy stable mode when setting the secret, we don't set this mode for new interfaces. This does not make sense, so change this behaviour. Fixes: 622c81d57b392cc ("ipv6: generation of stable privacy addresses for link-local and autoconf") Reported-by: Bjørn Mork <bjorn@mork.no> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14ipv6: addrconf: drop ieee802154 specific thingsAlexander Aring1-5/+3
This patch removes ARPHRD_IEEE802154 from addrconf handling. In the earlier days of 802.15.4 6LoWPAN, the interface type was ARPHRD_IEEE802154 which introduced several issues, because 802.15.4 interfaces used the same type. Since commit 965e613d299c ("ieee802154: 6lowpan: fix ARPHRD to ARPHRD_6LOWPAN") we use ARPHRD_6LOWPAN for 6LoWPAN interfaces. This patch will remove ARPHRD_IEEE802154 which is currently deadcode, because ARPHRD_IEEE802154 doesn't reach the minimum 1280 MTU of IPv6. Also we use 6LoWPAN EUI64 specific defines instead using link-layer constanst from 802.15.4 link-layer header. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05ipv6: keep existing flags when setting IFA_F_OPTIMISTICBjørn Mork1-1/+1
Commit 64236f3f3d74 ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") failed to update the setting of the IFA_F_OPTIMISTIC flag, causing the IFA_F_STABLE_PRIVACY flag to be lost if IFA_F_OPTIMISTIC is set. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: 64236f3f3d74 ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05ipv6: Only act upon NETDEV_*_TYPE_CHANGE if we have ipv6 addressesAndrew Lunn1-1/+2
An interface changing type may not have IPv6 addresses. Don't call the address configuration type change in this case. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.