aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/addrconf_core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17ipv6: Pass fib6_result to fib lookupsDavid Ahern1-6/+7
Change fib6_lookup and fib6_table_lookup to take a fib6_result and set f6i and nh rather than returning a fib6_info. For now both always return 0. A later patch set can make these more like the IPv4 counterparts and return EINVAL, EACCESS, etc based on fib6_type. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to ip6_mtu_from_fib6 and fib6_mtuDavid Ahern1-2/+3
Change ip6_mtu_from_fib6 and fib6_mtu to take a fib6_result over a fib6_info. Update both to use the fib6_nh from fib6_result. Since the signature of ip6_mtu_from_fib6 is already changing, add const to daddr and saddr. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Rename fib6_multipath_select and pass fib6_resultDavid Ahern1-6/+5
Add 'struct fib6_result' to hold the fib entry and fib6_nh from a fib lookup as separate entries, similar to what IPv4 now has with fib_result. Rename fib6_multipath_select to fib6_select_path, pass fib6_result to it, and set f6i and nh in the result once a path selection is done. Call fib6_select_path unconditionally for path selection which means moving the sibling and oif check to fib6_select_path. To handle the two different call paths (2 only call multipath_select if flowi6_oif == 0 and the other always calls it), add a new have_oif_match that controls the sibling walk if relevant. Update callers of fib6_multipath_select accordingly and have them use the fib6_info and fib6_nh from the result. This is needed for multipath nexthop objects where a single f6i can point to multiple fib6_nh (similar to IPv4). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08ipv6: Add fib6_nh_init and release to stubsDavid Ahern1-0/+9
Add fib6_nh_init and fib6_nh_release to ipv6_stubs. If fib6_nh_init fails, callers should not invoke fib6_nh_release, so there is no reason to have a dummy stub for the IPv6 is not enabled case. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Move ipv6 stubs to a separate header fileDavid Ahern1-1/+1
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13ipv6_stub: add ipv6_route_input stub/proxy.Peter Oskolkov1-0/+6
Proxy ip6_route_input via ipv6_stub, for later use by lwt bpf ip encap (see the next patch in the patchset). Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-22net/ipv6: Add helper to return path MTU based on fib resultDavid Ahern1-0/+8
Determine path MTU from a FIB lookup result. Logic is based on ip6_dst_mtu_forward plus lookup of nexthop exception. Add ip6_dst_mtu_forward to ipv6_stubs to handle access by core bpf code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11net/ipv6: Add fib lookup stubs for use in bpf helperDavid Ahern1-1/+32
Add stubs to retrieve a handle to an IPv6 FIB table, fib6_get_table, a stub to do a lookup in a specific table, fib6_table_lookup, and a stub for a full route lookup. The stubs are needed for core bpf code to handle the case when the IPv6 module is not builtin. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-10-20net: ipv6: Make inet6addr_validator a blocking notifierDavid Ahern1-4/+5
inet6addr_validator chain was added by commit 3ad7d2468f79f ("Ipvlan should return an error when an address is already in use") to allow address validation before changes are committed and to be able to fail the address change with an error back to the user. The address validation is not done for addresses received from router advertisements. Handling RAs in softirq context is the only reason for the notifier chain to be atomic versus blocking. Since the only current user, ipvlan, of the validator chain ignores softirq context, the notifier can be made blocking and simply not invoked for softirq path. The blocking option is needed by spectrum for example to validate resources for an adding an address to an interface. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09Ipvlan should return an error when an address is already in use.Krister Johansen1-0/+19
The ipvlan code already knows how to detect when a duplicate address is about to be assigned to an ipvlan device. However, that failure is not propogated outward and leads to a silent failure. Introduce a validation step at ip address creation time and allow device drivers to register to validate the incoming ip addresses. The ipvlan code is the first consumer. If it detects an address in use, we can return an error to the user before beginning to commit the new ifa in the networking code. This can be especially useful if it is necessary to provision many ipvlans in containers. The provisioning software (or operator) can use this to detect situations where an ip address is unexpectedly in use. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argumentRoopa Prabhu1-1/+10
This patch adds net argument to ipv6_stub_impl.ipv6_dst_lookup for use cases where sk is not available (like mpls). sk appears to be needed to get the namespace 'net' and is optional otherwise. This patch series changes ipv6_stub_impl.ipv6_dst_lookup to take net argument. sk remains optional. All callers of ipv6_stub_impl.ipv6_dst_lookup have been modified to pass net. I have modified them to use already available 'net' in the scope of the call. I can change them to sock_net(sk) to avoid any unintended change in behaviour if sock namespace is different. They dont seem to be from code inspection. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08ipv6: fix possible use after free of dev statsRobert Shearman1-2/+9
The memory pointed to by idev->stats.icmpv6msgdev, idev->stats.icmpv6dev and idev->stats.ipv6 can each be used in an RCU read context without taking a reference on idev. For example, through IP6_*_STATS_* calls in ip6_rcv. These memory blocks are freed without waiting for an RCU grace period to elapse. This could lead to the memory being written to after it has been freed. Fix this by using call_rcu to free the memory used for stats, as well as idev after an RCU grace period has elapsed. Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for inequality with NULLIan Morris1-1/+1
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30ipv6: remove rt6i_genidHannes Frederic Sowa1-0/+7
Eric Dumazet noticed that all no-nonexthop or no-gateway routes which are already marked DST_HOST (e.g. input routes routes) will always be invalidated during sk_dst_check. Thus per-socket dst caching absolutely had no effect and early demuxing had no effect. Thus this patch removes rt6i_genid: fn_sernum already gets modified during add operations, so we only must ensure we mutate fn_sernum during ipv6 address remove operations. This is a fairly cost extensive operations, but address removal should not happen that often. Also our mtu update functions do the same and we heard no complains so far. xfrm policy changes also cause a call into fib6_flush_trees. Also plug a hole in rt6_info (no cacheline changes). I verified via tracing that this change has effect. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07net: clean up snmp stats codeWANG Cong1-1/+1
commit 8f0ea0fe3a036a47767f9c80e (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f58fef9963eac61db8093689544e29a600 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31ipv6: move in6_dev_finish_destroy() into core kernelCong Wang1-0/+31
in6_dev_put() will be needed by vxlan module, so is in6_dev_finish_destroy(). Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31ipv6: export in6addr_loopback to modulesCong Wang1-0/+16
It is needed by vxlan module. Noticed by Mike. Cc: Mike Rapoport <mike.rapoport@ravellosystems.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31ipv6: export a stub for IPv6 symbols used by vxlanCong Wang1-0/+3
In case IPv6 is compiled as a module, introduce a stub for ipv6_sock_mc_join and ipv6_sock_mc_drop etc.. It will be used by vxlan module. Suggested by Ben. This is an ugly but easy solution for now. Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: add include file to suppress sparse warningsEric Dumazet1-0/+1
commit f88c91ddba95 ("ipv6: statically link register_inet6addr_notifier()" added following sparse warnings : net/ipv6/addrconf_core.c:83:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:89:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:95:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static? Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14ipv6: statically link register_inet6addr_notifier()Cong Wang1-0/+19
Tomas reported the following build error: net/built-in.o: In function `ieee80211_unregister_hw': (.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier' net/built-in.o: In function `ieee80211_register_hw': (.text+0x10f610): undefined reference to `register_inet6addr_notifier' make: *** [vmlinux] Error 1 when built IPv6 as a module. So we have to statically link these symbols. Reported-by: Tomas Melin <tomas.melin@iki.fi> Cc: Tomas Melin <tomas.melin@iki.fi> Cc: "David S. Miller" <davem@davemloft.net> Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-1/+1
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02net/ipv6/addrconf_core.c: Checkpatch cleanupEldad Zack1-1/+1
addrconf_core.c:13: ERROR: space required before the open parenthesis '(' Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-02-26ipv6: Remove IPV6_ADDR_RESERVEDUlrich Weber1-1/+1
RFC 4291 section 2.4 states that all uncategorized addresses should be considered as Global Unicast. This will remove IPV6_ADDR_RESERVED completely and return IPV6_ADDR_UNICAST in ipv6_addr_type() instead. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[IPV6]: ipv6_addr_type() doesn't know about RFC4193 addresses.Dave Johnson1-0/+3
ipv6_addr_type() doesn't check for 'Unique Local IPv6 Unicast Addresses' (RFC4193) and returns IPV6_ADDR_RESERVED for that range. SCTP uses this function and will fail bind() and connect() calls that use RFC4193 addresses, SCTP will also ignore inbound connections from RFC4193 addresses if listening on IPV6_ADDR_ANY. There may be other users of ipv6_addr_type() that could also have problems. Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26[IPV6]: Fix __ipv6_addr_type() export in correct place.David S. Miller1-0/+1
It needs to be in net/ipv6/addrconf_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26[IPV6] ADDRCONF: Statically link __ipv6_addr_type() for sunrpc subsystem.YOSHIFUJI Hideaki1-0/+75
Link __ipv6_addr_type() statically for sunrpc code even if IPv6 is built as module. Signed-off-by: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.