aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/ip6_fib.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-04net: ipv6: Change notifications for multipath delete to RTA_MULTIPATHDavid Ahern1-1/+2
If an entire multipath route is deleted using prefix and len (without any nexthops), send a single RTM_DELROUTE notification with the full route using RTA_MULTIPATH. This is done by generating the skb before the route delete when all of the sibling routes are still present but sending it after the route has been removed from the FIB. The skip_notify flag is used to tell the lower fib code not to send notifications for the individual nexthop routes. If a route is deleted using RTA_MULTIPATH for any nexthops or a single nexthop entry is deleted, then the nexthops are deleted one at a time with notifications sent as each hop is deleted. This is necessary given that IPv6 allows individual hops within a route to be deleted. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Change notifications for multipath add to RTA_MULTIPATHDavid Ahern1-2/+4
Change ip6_route_multipath_add to send one notifciation with the full route encoded with RTA_MULTIPATH instead of a series of individual routes. This is done by adding a skip_notify flag to the nl_info struct. The flag is used to skip sending of the notification in the fib code that actually inserts the route. Once the full route has been added, a notification is generated with all nexthops. ip6_route_multipath_add handles 3 use cases: new routes, route replace, and route append. The multipath notification generated needs to be consistent with the order of the nexthops and it should be consistent with the order in a FIB dump which means the route with the first nexthop needs to be used as the route reference. For the first 2 cases (new and replace), a reference to the route used to send the notification is obtained by saving the first route added. For the append case, the last route added is used to loop back to its first sibling route which is the first nexthop in the multipath route. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attributeDavid Ahern1-0/+10
IPv6 returns multipath routes as a series of individual routes making their display and handling by userspace different and more complicated than IPv4, putting the burden on the user to see that a route is part of a multipath route and internally creating a multipath route if desired (e.g., libnl does this as of commit 29b71371e764). This patch addresses this difference, allowing multipath routes to be returned using the RTA_MULTIPATH attribute. The end result is that IPv6 multipath routes can be treated and displayed in a format similar to IPv4: $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:200::/120 metric 1024 nexthop via 2001:db8:1::2 dev eth1 weight 1 nexthop via 2001:db8:2::2 dev eth2 weight 1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01net: ipv6: add NLM_F_APPEND in notifications when applicableDavid Ahern1-0/+3
IPv6 does not set the NLM_F_APPEND flag in notifications to signal that a NEWROUTE is an append versus a new route or a replaced one. Add the flag if the request has it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09ipv6: report NLM_F_CREATE and NLM_F_EXCL flags in RTM_NEWROUTE eventsGuillaume Nault1-1/+5
Since commit 37a1d3611c12 ("ipv6: include NLM_F_REPLACE in route replace notifications"), RTM_NEWROUTE notifications have their NLM_F_REPLACE flag set if the new route replaced a preexisting one. However, other flags aren't set. This patch reports the missing NLM_F_CREATE and NLM_F_EXCL flag bits. NLM_F_APPEND is not reported, because in ipv6 a NLM_F_CREATE request is interpreted as an append request (contrary to ipv4, "prepend" is not supported, so if NLM_F_EXCL is not set then NLM_F_APPEND is implicit). As a result, the possible flag combination can now be reported (iproute2's terminology into parentheses): * NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation ("add"). * NLM_F_CREATE: route did already exist, new route added after preexisting ones ("append"). * NLM_F_REPLACE: route did already exist, new route replaced the first preexisting one ("change"). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05ipv6: Fix mem leak in rt6i_pcpuMartin KaFai Lau1-0/+1
It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy <pety@rusnet.ru> Tested-by: Petr Novopashenniy <pety@rusnet.ru> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06net: vrf: Create FIB tables on link createDavid Ahern1-0/+1
Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08ipv6: per netns FIB garbage collectionMichal Kubeček1-5/+4
One of our customers observed issues with FIB6 garbage collectors running in different network namespaces blocking each other, resulting in soft lockups (fib6_run_gc() initiated from timer runs always in forced mode). Now that FIB6 walkers are separated per namespace, there is no more need for instances of fib6_run_gc() in different namespaces blocking each other. There is still a call to icmp6_dst_gc() which operates on shared data but this function is protected by its own shared lock. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08ipv6: per netns fib6 walkersMichal Kubeček1-32/+36
The IPv6 FIB data structures are separated per network namespace but there is still only one global walkers list and one global walker list lock. This means changes in one namespace unnecessarily interfere with walkers in other namespaces. Replace the global list with per-netns lists (and give each its own lock). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08ipv6: replace global gc_args with local variableMichal Kubeček1-6/+8
Global variable gc_args is only used in fib6_run_gc() and functions called from it. As fib6_run_gc() makes sure there is at most one instance of fib6_clean_all() running at any moment, we can replace gc_args with a local variable which will be needed once multiple instances (per netns) of garbage collector are allowed. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+11
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23ipv6: fix the incorrect return value of throw routelucien1-1/+11
The error condition -EAGAIN, which is signaled by throw routes, tells the rules framework to walk on searching for next matches. If the walk ends and we stop walking the rules with the result of a throw route we have to translate the error conditions to -ENETUNREACH. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Export fib6_get_table and nd_tblDavid Ahern1-0/+1
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17ipv6: include NLM_F_REPLACE in route replace notificationsRoopa Prabhu1-3/+3
This patch adds NLM_F_REPLACE flag to ipv6 route replace notifications. This makes nlm_flags in ipv6 replace notifications consistent with ipv4. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15ipv6: Replace spinlock with seqlock and rcu in ip6_tunnelMartin KaFai Lau1-2/+7
This patch uses a seqlock to ensure consistency between idst->dst and idst->cookie. It also makes dst freeing from fib tree to undergo a rcu grace period. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15ipv6: Avoid double dst_freeMartin KaFai Lau1-2/+9
It is a prep work to get dst freeing from fib tree undergo a rcu grace period. The following is a common paradigm: if (ip6_del_rt(rt)) dst_free(rt) which means, if rt cannot be deleted from the fib tree, dst_free(rt) now. 1. We don't know the ip6_del_rt(rt) failure is because it was not managed by fib tree (e.g. DST_NOCACHE) or it had already been removed from the fib tree. 2. If rt had been managed by the fib tree, ip6_del_rt(rt) failure means dst_free(rt) has been called already. A second dst_free(rt) is not always obviously safe. The rt may have been destroyed already. 3. If rt is a DST_NOCACHE, dst_free(rt) should not be called. 4. It is a stopper to make dst freeing from fib tree undergo a rcu grace period. This patch is to use a DST_NOCACHE flag to indicate a rt is not managed by the fib tree. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
Conflicts: drivers/net/usb/qmi_wwan.c Overlapping additions of new device IDs to qmi_wwan.c Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20route: move lwtunnel state to dst_entryJiri Benc1-1/+0
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17ipv6: Fix a potential deadlock when creating pcpu rtMartin KaFai Lau1-0/+2
rt6_make_pcpu_route() is called under read_lock(&table->tb6_lock). rt6_make_pcpu_route() calls ip6_rt_pcpu_alloc(rt) which then calls dst_alloc(). dst_alloc() _may_ call ip6_dst_gc() which takes the write_lock(&tabl->tb6_lock). A visualized version: read_lock(&table->tb6_lock); rt6_make_pcpu_route(); => ip6_rt_pcpu_alloc(); => dst_alloc(); => ip6_dst_gc(); => write_lock(&table->tb6_lock); /* oops */ The fix is to do a read_unlock first before calling ip6_rt_pcpu_alloc(). A reported stack: [141625.537638] INFO: rcu_sched self-detected stall on CPU { 27} (t=60000 jiffies g=4159086 c=4159085 q=2139) [141625.547469] Task dump for CPU 27: [141625.550881] mtr R running task 0 22121 22081 0x00000008 [141625.558069] 0000000000000000 ffff88103f363d98 ffffffff8106e488 000000000000001b [141625.565641] ffffffff81684900 ffff88103f363db8 ffffffff810702b0 0000000008000000 [141625.573220] ffffffff81684900 ffff88103f363de8 ffffffff8108df9f ffff88103f375a00 [141625.580803] Call Trace: [141625.583345] <IRQ> [<ffffffff8106e488>] sched_show_task+0xc1/0xc6 [141625.589650] [<ffffffff810702b0>] dump_cpu_task+0x35/0x39 [141625.595144] [<ffffffff8108df9f>] rcu_dump_cpu_stacks+0x6a/0x8c [141625.601320] [<ffffffff81090606>] rcu_check_callbacks+0x1f6/0x5d4 [141625.607669] [<ffffffff810940c8>] update_process_times+0x2a/0x4f [141625.613925] [<ffffffff8109fbee>] tick_sched_handle+0x32/0x3e [141625.619923] [<ffffffff8109fc2f>] tick_sched_timer+0x35/0x5c [141625.625830] [<ffffffff81094a1f>] __hrtimer_run_queues+0x8f/0x18d [141625.632171] [<ffffffff81094c9e>] hrtimer_interrupt+0xa0/0x166 [141625.638258] [<ffffffff8102bf2a>] local_apic_timer_interrupt+0x4e/0x52 [141625.645036] [<ffffffff8102c36f>] smp_apic_timer_interrupt+0x39/0x4a [141625.651643] [<ffffffff8140b9e8>] apic_timer_interrupt+0x68/0x70 [141625.657895] <EOI> [<ffffffff81346ee8>] ? dst_destroy+0x7c/0xb5 [141625.664188] [<ffffffff813d45b5>] ? fib6_flush_trees+0x20/0x20 [141625.670272] [<ffffffff81082b45>] ? queue_write_lock_slowpath+0x60/0x6f [141625.677140] [<ffffffff8140aa33>] _raw_write_lock_bh+0x23/0x25 [141625.683218] [<ffffffff813d4553>] __fib6_clean_all+0x40/0x82 [141625.689124] [<ffffffff813d45b5>] ? fib6_flush_trees+0x20/0x20 [141625.695207] [<ffffffff813d6058>] fib6_clean_all+0xe/0x10 [141625.700854] [<ffffffff813d60d3>] fib6_run_gc+0x79/0xc8 [141625.706329] [<ffffffff813d0510>] ip6_dst_gc+0x85/0xf9 [141625.711718] [<ffffffff81346d68>] dst_alloc+0x55/0x159 [141625.717105] [<ffffffff813d09b5>] __ip6_dst_alloc.isra.32+0x19/0x63 [141625.723620] [<ffffffff813d1830>] ip6_pol_route+0x36a/0x3e8 [141625.729441] [<ffffffff813d18d6>] ip6_pol_route_output+0x11/0x13 [141625.735700] [<ffffffff813f02c8>] fib6_rule_action+0xa7/0x1bf [141625.741698] [<ffffffff813d18c5>] ? ip6_pol_route_input+0x17/0x17 [141625.748043] [<ffffffff81357c48>] fib_rules_lookup+0xb5/0x12a [141625.754050] [<ffffffff81141628>] ? poll_select_copy_remaining+0xf9/0xf9 [141625.761002] [<ffffffff813f0535>] fib6_rule_lookup+0x37/0x5c [141625.766914] [<ffffffff813d18c5>] ? ip6_pol_route_input+0x17/0x17 [141625.773260] [<ffffffff813d008c>] ip6_route_output+0x7a/0x82 [141625.779177] [<ffffffff813c44c8>] ip6_dst_lookup_tail+0x53/0x112 [141625.785437] [<ffffffff813c45c3>] ip6_dst_lookup_flow+0x2a/0x6b [141625.791604] [<ffffffff813ddaab>] rawv6_sendmsg+0x407/0x9b6 [141625.797423] [<ffffffff813d7914>] ? do_ipv6_setsockopt.isra.8+0xd87/0xde2 [141625.804464] [<ffffffff8139d4b4>] inet_sendmsg+0x57/0x8e [141625.810028] [<ffffffff81329ba3>] sock_sendmsg+0x2e/0x3c [141625.815588] [<ffffffff8132be57>] SyS_sendto+0xfe/0x143 [141625.821063] [<ffffffff813dd551>] ? rawv6_setsockopt+0x5e/0x67 [141625.827146] [<ffffffff8132c9f8>] ? sock_common_setsockopt+0xf/0x11 [141625.833660] [<ffffffff8132c08c>] ? SyS_setsockopt+0x81/0xa2 [141625.839565] [<ffffffff8140ac17>] entry_SYSCALL_64_fastpath+0x12/0x6a Fixes: d52d3997f843 ("pv6: Create percpu rt6_info") Signed-off-by: Martin KaFai Lau <kafai@fb.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27lwtunnel: change prototype of lwtunnel_state_get()Nicolas Dichtel1-1/+1
It saves some lines and simplify a bit the code when the state is returning by this function. It's also useful to handle a NULL entry. To avoid too long lines, I've also renamed lwtunnel_state_get() and lwtunnel_state_put() to lwtstate_get() and lwtstate_put(). CC: Thomas Graf <tgraf@suug.ch> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21ipv6: support for fib route lwtunnel encap attributesRoopa Prabhu1-0/+2
This patch adds support in ipv6 fib functions to parse Netlink RTA encap attributes and attach encap state data to rt6_info. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25ipv6: Create percpu rt6_infoMartin KaFai Lau1-1/+23
After the patch 'ipv6: Only create RTF_CACHE routes after encountering pmtu exception', we need to compensate the performance hit (bouncing dst->__refcnt). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25ipv6: Only create RTF_CACHE routes after encountering pmtu exceptionMartin KaFai Lau1-0/+1
This patch creates a RTF_CACHE routes only after encountering a pmtu exception. After ip6_rt_update_pmtu() has inserted the RTF_CACHE route to the fib6 tree, the rt->rt6i_node->fn_sernum is bumped which will fail the ip6_dst_check() and trigger a relookup. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-20ipv6: fix ECMP route replacementMichal Kubeček1-2/+37
When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for inequality with NULLIan Morris1-2/+2
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-19/+26
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos tooHannes Frederic Sowa1-19/+26
Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-1/+0
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05net: fib6: convert cfg metric to u32 outside of table write lockFlorian Westphal1-33/+36
Do the nla validation earlier, outside the write lock. This is needed by followup patch which needs to be able to call request_module (which can sleep) if needed. Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05net: fib6: fib6_commit_metrics: fix potential NULL pointer dereferenceDaniel Borkmann1-7/+6
When IPv6 host routes with metrics attached are being added, we fetch the metrics store from the dst via COW through dst_metrics_write_ptr(), added through commit e5fd387ad5b3. One remaining problem here is that we actually call into inet_getpeer() and may end up allocating/creating a new peer from the kmemcache, which may fail. Example trace from perf probe (inet_getpeer:41) where create is 1: ip 6877 [002] 4221.391591: probe:inet_getpeer: (ffffffff8165e293) 85e294 inet_getpeer.part.7 (<- kmem_cache_alloc()) 85e578 inet_getpeer 8eb333 ipv6_cow_metrics 8f10ff fib6_commit_metrics Therefore, a check for NULL on the return of dst_metrics_write_ptr() is necessary here. Joint work with Florian Westphal. Fixes: e5fd387ad5b3 ("ipv6: do not overwrite inetpeer metrics prematurely") Cc: Michal Kubeček <mkubecek@suse.cz> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: don't walk node's leaf during serial number updateHannes Frederic Sowa1-17/+30
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: make fib6 serial number per namespaceHannes Frederic Sowa1-7/+6
Try to reduce number of possible fn_sernum mutation by constraining them to their namespace. Also remove rt_genid which I forgot to remove in 705f1c869d577c ("ipv6: remove rt6i_genid"). Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: only generate one new serial number per fib mutationHannes Frederic Sowa1-6/+6
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: make rt_sernum atomic and serial number fields ordinary intsHannes Frederic Sowa1-10/+13
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07ipv6: minor fib6 cleanups like type safety, bool conversion, inline removalHannes Frederic Sowa1-40/+31
Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t to fib6_walk_state as recommended by Cong Wang. Cc: Cong Wang <cwang@twopensource.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30ipv6: remove rt6i_genidHannes Frederic Sowa1-0/+20
Eric Dumazet noticed that all no-nonexthop or no-gateway routes which are already marked DST_HOST (e.g. input routes routes) will always be invalidated during sk_dst_check. Thus per-socket dst caching absolutely had no effect and early demuxing had no effect. Thus this patch removes rt6i_genid: fn_sernum already gets modified during add operations, so we only must ensure we mutate fn_sernum during ipv6 address remove operations. This is a fairly cost extensive operations, but address removal should not happen that often. Also our mtu update functions do the same and we heard no complains so far. xfrm policy changes also cause a call into fib6_flush_trees. Also plug a hole in rt6_info (no cacheline changes). I verified via tracing that this change has effect. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: ipv6: fib: don't sleep inside atomic lockBenjamin Block1-1/+1
The function fib6_commit_metrics() allocates a piece of memory in mode GFP_KERNEL while holding an atomic lock from higher up in the stack, in the function __ip6_ins_rt(). This produces the following BUG: > BUG: sleeping function called from invalid context at mm/slub.c:1250 > in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: dhcpcd > 2 locks held by dhcpcd/2909: > #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81978e67>] rtnl_lock+0x17/0x20 > #1: (&tb->tb6_lock){++--+.}, at: [<ffffffff81a6951a>] ip6_route_add+0x65a/0x800 > CPU: 1 PID: 2909 Comm: dhcpcd Not tainted 3.17.0-rc1 #1 > Hardware name: ASUS All Series/Q87T, BIOS 0216 10/16/2013 > 0000000000000008 ffff8800c8f13858 ffffffff81af135a 0000000000000000 > ffff880212202430 ffff8800c8f13878 ffffffff810f8d3a ffff880212202c98 > 0000000000000010 ffff8800c8f138c8 ffffffff8121ad0e 0000000000000001 > Call Trace: > [<ffffffff81af135a>] dump_stack+0x4e/0x68 > [<ffffffff810f8d3a>] __might_sleep+0x10a/0x120 > [<ffffffff8121ad0e>] kmem_cache_alloc_trace+0x4e/0x190 > [<ffffffff81a6bcd6>] ? fib6_commit_metrics+0x66/0x110 > [<ffffffff81a6bcd6>] fib6_commit_metrics+0x66/0x110 > [<ffffffff81a6cbf3>] fib6_add+0x883/0xa80 > [<ffffffff81a6951a>] ? ip6_route_add+0x65a/0x800 > [<ffffffff81a69535>] ip6_route_add+0x675/0x800 > [<ffffffff81a68f2a>] ? ip6_route_add+0x6a/0x800 > [<ffffffff81a6990c>] inet6_rtm_newroute+0x5c/0x80 > [<ffffffff8197cf01>] rtnetlink_rcv_msg+0x211/0x260 > [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20 > [<ffffffff81119708>] ? lock_release_holdtime+0x28/0x180 > [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20 > [<ffffffff8197ccf0>] ? __rtnl_unlock+0x20/0x20 > [<ffffffff819a989e>] netlink_rcv_skb+0x6e/0xd0 > [<ffffffff81978ee5>] rtnetlink_rcv+0x25/0x40 > [<ffffffff819a8e59>] netlink_unicast+0xd9/0x180 > [<ffffffff819a9600>] netlink_sendmsg+0x700/0x770 > [<ffffffff81103735>] ? local_clock+0x25/0x30 > [<ffffffff8194e83c>] sock_sendmsg+0x6c/0x90 > [<ffffffff811f98e3>] ? might_fault+0xa3/0xb0 > [<ffffffff8195ca6d>] ? verify_iovec+0x7d/0xf0 > [<ffffffff8194ec3e>] ___sys_sendmsg+0x37e/0x3b0 > [<ffffffff8111ef15>] ? trace_hardirqs_on_caller+0x185/0x220 > [<ffffffff81af979e>] ? mutex_unlock+0xe/0x10 > [<ffffffff819a55ec>] ? netlink_insert+0xbc/0xe0 > [<ffffffff819a65e5>] ? netlink_autobind.isra.30+0x125/0x150 > [<ffffffff819a6520>] ? netlink_autobind.isra.30+0x60/0x150 > [<ffffffff819a84f9>] ? netlink_bind+0x159/0x230 > [<ffffffff811f989a>] ? might_fault+0x5a/0xb0 > [<ffffffff8194f25e>] ? SYSC_bind+0x7e/0xd0 > [<ffffffff8194f8cd>] __sys_sendmsg+0x4d/0x80 > [<ffffffff8194f912>] SyS_sendmsg+0x12/0x20 > [<ffffffff81afc692>] system_call_fastpath+0x16/0x1b Fixing this by replacing the mode GFP_KERNEL with GFP_ATOMIC. Signed-off-by: Benjamin Block <bebl@mageta.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12ipv6: remove parameter rt from fib6_prune_clones()Duan Jiong1-7/+5
the parameter rt will be assigned to c.arg in function fib6_clean_tree(), but function fib6_prune_clone() doesn't use c.arg, so we can remove it safely. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24ipv6: fib: fix fib dump restartKumar Sundararajan1-1/+2
When the ipv6 fib changes during a table dump, the walk is restarted and the number of nodes dumped are skipped. But the existing code doesn't advance to the next node after a node is skipped. This can cause the dump to loop or produce lots of duplicates when the fib is modified during the dump. This change advances the walk to the next node if the current node is skipped after a restart. Signed-off-by: Kumar Sundararajan <kumar@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29ipv6: fix checkpatch errors of "foo*" and "foo * bar"Wang Yufen1-15/+15
ERROR: "(foo*)" should be "(foo *)" ERROR: "foo * bar" should be "foo *bar" Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Wang Yufen <wangyufen@huawei.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29ipv6: fix checkpatch errors of brace and trailing statementsWang Yufen1-8/+10
ERROR: open brace '{' following enum go on the same line ERROR: open brace '{' following struct go on the same line ERROR: trailing statements should be on next line Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29ipv6: fix checkpatch errors comments and spaceWang Yufen1-14/+12
WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line ERROR: spaces required around that ':' (ctx:VxW) ERROR: spaces required around that '>' (ctx:VxV) ERROR: spaces required around that '>=' (ctx:VxV) Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27ipv6: do not overwrite inetpeer metrics prematurelyMichal Kubeček1-3/+44
If an IPv6 host route with metrics exists, an attempt to add a new route for the same target with different metrics fails but rewrites the metrics anyway: 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 rto_min lock 1s 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1500 RTNETLINK answers: File exists 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 rto_min lock 1.5s This is caused by all IPv6 host routes using the metrics in their inetpeer (or the shared default). This also holds for the new route created in ip6_route_add() which shares the metrics with the already existing route and thus ip6_route_add() rewrites the metrics even if the new route ends up not being used at all. Another problem is that old metrics in inetpeer can reappear unexpectedly for a new route, e.g. 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000 12sp0:~ # ip route del fec0::1 12sp0:~ # ip route add fec0::1 dev eth0 12sp0:~ # ip route change fec0::1 dev eth0 hoplimit 10 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 hoplimit 10 rto_min lock 1s Resolve the first problem by moving the setting of metrics down into fib6_add_rt2node() to the point we are sure we are inserting the new route into the tree. Second problem is addressed by introducing new flag DST_METRICS_FORCE_OVERWRITE which is set for a new host route in ip6_route_add() and makes ipv6_cow_metrics() always overwrite the metrics in inetpeer (even if they are not "new"); it is reset after that. v5: use a flag in _metrics member rather than one in flags v4: fix a typo making a condition always true (thanks to Hannes Frederic Sowa) v3: rewritten based on David Miller's idea to move setting the metrics (and allocation in non-host case) down to the point we already know the route is to be inserted. Also rebased to net-next as it is quite late in the cycle. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02ipv6: remove prune parameter for fib6_clean_allLi RongQing1-3/+3
since the prune parameter for fib6_clean_all always is 0, remove it. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27ipv6: compare sernum when walking fib for /proc/net/ipv6_route as safety netHannes Frederic Sowa1-0/+14
This patch provides an additional safety net against NULL pointer dereferences while walking the fib trie for the new /proc/net/ipv6_route walkers. I never needed it myself and am unsure if it is needed at all, but the same checks where introduced in 2bec5a369ee79576a3eea2c23863325089785a2c ("ipv6: fib: fix crash when changing large fib while dumping it") to fix NULL pointer bugs. This patch is separated from the first patch to make it easier to revert if we are sure we can drop this logic. Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27ipv6: avoid high order memory allocations for /proc/net/ipv6_routeHannes Frederic Sowa1-19/+172
Dumping routes on a system with lots rt6_infos in the fibs causes up to 11-order allocations in seq_file (which fail). While we could switch there to vmalloc we could just implement the streaming interface for /proc/net/ipv6_route. This patch switches /proc/net/ipv6_route from single_open_net to seq_open_net. loff_t *pos tracks dst entries. Also kill never used struct rt6_proc_arg and now unused function fib6_clean_all_ro. Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11net: fib: fib6_add: fix potential NULL pointer dereferenceDaniel Borkmann1-1/+1
When the kernel is compiled with CONFIG_IPV6_SUBTREES, and we return with an error in fn = fib6_add_1(), then error codes are encoded into the return pointer e.g. ERR_PTR(-ENOENT). In such an error case, we write the error code into err and jump to out, hence enter the if(err) condition. Now, if CONFIG_IPV6_SUBTREES is enabled, we check for: if (pn != fn && pn->leaf == rt) ... if (pn != fn && !pn->leaf && !(pn->fn_flags & RTN_RTINFO)) ... Since pn is NULL and fn is f.e. ERR_PTR(-ENOENT), then pn != fn evaluates to true and causes a NULL-pointer dereference on further checks on pn. Fix it, by setting both NULL in error case, so that pn != fn already evaluates to false and no further dereference takes place. This was first correctly implemented in 4a287eba2 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag"), but the bug got later on introduced by 188c517a0 ("ipv6: return errno pointers consistently for fib6_add_1()"). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Lin Ming <mlin@ss.pku.edu.cn> Cc: Matti Vaittinen <matti.vaittinen@nsn.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Matti Vaittinen <matti.vaittinen@nsn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+12
2013-08-07ipv6: don't stop backtracking in fib6_lookup_1 if subtree does not matchHannes Frederic Sowa1-4/+12
In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by: Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.