aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/ip6_offload.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-26net: Convert GRO SKB handling to list_head.David Miller1-8/+8
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: add udp gsoWillem de Bruijn1-2/+4
Implement generic segmentation offload support for udp datagrams. A follow-up patch adds support to the protocol stack to generate such packets. UDP GSO is not UFO. UFO fragments a single large datagram. GSO splits a large payload into a number of discrete UDP datagrams. The implementation adds a GSO type SKB_UDP_GSO_L4 to differentiate it from UFO (SKB_UDP_GSO). IPPROTO_UDPLITE is excluded, as that protocol has no gso handler registered. [ Export __udp_gso_segment for ipv6. -DaveM ] Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08gso: fix payload length when gso_size is zeroAlexey Kodanev1-1/+1
When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04ipv6: Fix leak in ipv6_gso_segment().David S. Miller1-1/+3
If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17ipv6: Check ip6_find_1stfragopt() return value properly.David S. Miller1-5/+4
Do not use unsigned variables to see if it returns a negative error or not. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17ipv6: Prevent overrun when parsing v6 header optionsCraig Gallek1-0/+2
The KASAN warning repoted below was discovered with a syzkaller program. The reproducer is basically: int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP); send(s, &one_byte_of_data, 1, MSG_MORE); send(s, &more_than_mtu_bytes_data, 2000, 0); The socket() call sets the nexthdr field of the v6 header to NEXTHDR_HOP, the first send call primes the payload with a non zero byte of data, and the second send call triggers the fragmentation path. The fragmentation code tries to parse the header options in order to figure out where to insert the fragment option. Since nexthdr points to an invalid option, the calculation of the size of the network header can made to be much larger than the linear section of the skb and data is read outside of it. This fix makes ip6_find_1stfrag return an error if it detects running out-of-bounds. [ 42.361487] ================================================================== [ 42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730 [ 42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789 [ 42.366469] [ 42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41 [ 42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014 [ 42.368824] Call Trace: [ 42.369183] dump_stack+0xb3/0x10b [ 42.369664] print_address_description+0x73/0x290 [ 42.370325] kasan_report+0x252/0x370 [ 42.370839] ? ip6_fragment+0x11c8/0x3730 [ 42.371396] check_memory_region+0x13c/0x1a0 [ 42.371978] memcpy+0x23/0x50 [ 42.372395] ip6_fragment+0x11c8/0x3730 [ 42.372920] ? nf_ct_expect_unregister_notifier+0x110/0x110 [ 42.373681] ? ip6_copy_metadata+0x7f0/0x7f0 [ 42.374263] ? ip6_forward+0x2e30/0x2e30 [ 42.374803] ip6_finish_output+0x584/0x990 [ 42.375350] ip6_output+0x1b7/0x690 [ 42.375836] ? ip6_finish_output+0x990/0x990 [ 42.376411] ? ip6_fragment+0x3730/0x3730 [ 42.376968] ip6_local_out+0x95/0x160 [ 42.377471] ip6_send_skb+0xa1/0x330 [ 42.377969] ip6_push_pending_frames+0xb3/0xe0 [ 42.378589] rawv6_sendmsg+0x2051/0x2db0 [ 42.379129] ? rawv6_bind+0x8b0/0x8b0 [ 42.379633] ? _copy_from_user+0x84/0xe0 [ 42.380193] ? debug_check_no_locks_freed+0x290/0x290 [ 42.380878] ? ___sys_sendmsg+0x162/0x930 [ 42.381427] ? rcu_read_lock_sched_held+0xa3/0x120 [ 42.382074] ? sock_has_perm+0x1f6/0x290 [ 42.382614] ? ___sys_sendmsg+0x167/0x930 [ 42.383173] ? lock_downgrade+0x660/0x660 [ 42.383727] inet_sendmsg+0x123/0x500 [ 42.384226] ? inet_sendmsg+0x123/0x500 [ 42.384748] ? inet_recvmsg+0x540/0x540 [ 42.385263] sock_sendmsg+0xca/0x110 [ 42.385758] SYSC_sendto+0x217/0x380 [ 42.386249] ? SYSC_connect+0x310/0x310 [ 42.386783] ? __might_fault+0x110/0x1d0 [ 42.387324] ? lock_downgrade+0x660/0x660 [ 42.387880] ? __fget_light+0xa1/0x1f0 [ 42.388403] ? __fdget+0x18/0x20 [ 42.388851] ? sock_common_setsockopt+0x95/0xd0 [ 42.389472] ? SyS_setsockopt+0x17f/0x260 [ 42.390021] ? entry_SYSCALL_64_fastpath+0x5/0xbe [ 42.390650] SyS_sendto+0x40/0x50 [ 42.391103] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.391731] RIP: 0033:0x7fbbb711e383 [ 42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383 [ 42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003 [ 42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018 [ 42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad [ 42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00 [ 42.397257] [ 42.397411] Allocated by task 3789: [ 42.397702] save_stack_trace+0x16/0x20 [ 42.398005] save_stack+0x46/0xd0 [ 42.398267] kasan_kmalloc+0xad/0xe0 [ 42.398548] kasan_slab_alloc+0x12/0x20 [ 42.398848] __kmalloc_node_track_caller+0xcb/0x380 [ 42.399224] __kmalloc_reserve.isra.32+0x41/0xe0 [ 42.399654] __alloc_skb+0xf8/0x580 [ 42.400003] sock_wmalloc+0xab/0xf0 [ 42.400346] __ip6_append_data.isra.41+0x2472/0x33d0 [ 42.400813] ip6_append_data+0x1a8/0x2f0 [ 42.401122] rawv6_sendmsg+0x11ee/0x2db0 [ 42.401505] inet_sendmsg+0x123/0x500 [ 42.401860] sock_sendmsg+0xca/0x110 [ 42.402209] ___sys_sendmsg+0x7cb/0x930 [ 42.402582] __sys_sendmsg+0xd9/0x190 [ 42.402941] SyS_sendmsg+0x2d/0x50 [ 42.403273] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.403718] [ 42.403871] Freed by task 1794: [ 42.404146] save_stack_trace+0x16/0x20 [ 42.404515] save_stack+0x46/0xd0 [ 42.404827] kasan_slab_free+0x72/0xc0 [ 42.405167] kfree+0xe8/0x2b0 [ 42.405462] skb_free_head+0x74/0xb0 [ 42.405806] skb_release_data+0x30e/0x3a0 [ 42.406198] skb_release_all+0x4a/0x60 [ 42.406563] consume_skb+0x113/0x2e0 [ 42.406910] skb_free_datagram+0x1a/0xe0 [ 42.407288] netlink_recvmsg+0x60d/0xe40 [ 42.407667] sock_recvmsg+0xd7/0x110 [ 42.408022] ___sys_recvmsg+0x25c/0x580 [ 42.408395] __sys_recvmsg+0xd6/0x190 [ 42.408753] SyS_recvmsg+0x2d/0x50 [ 42.409086] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.409513] [ 42.409665] The buggy address belongs to the object at ffff88000969e780 [ 42.409665] which belongs to the cache kmalloc-512 of size 512 [ 42.410846] The buggy address is located 24 bytes inside of [ 42.410846] 512-byte region [ffff88000969e780, ffff88000969e980) [ 42.411941] The buggy address belongs to the page: [ 42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 [ 42.413298] flags: 0x100000000008100(slab|head) [ 42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c [ 42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000 [ 42.415074] page dumped because: kasan: bad access detected [ 42.415604] [ 42.415757] Memory state around the buggy address: [ 42.416222] ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 42.416904] ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 42.418273] ^ [ 42.418588] ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 42.419273] ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 42.419882] ================================================================== Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net/tunnel: set inner protocol in network gro hooksPaolo Abeni1-1/+3
The gso code of several tunnels type (gre and udp tunnels) takes for granted that the skb->inner_protocol is properly initialized and drops the packet elsewhere. On the forwarding path no one is initializing such field, so gro encapsulated packets are dropped on forward. Since commit 38720352412a ("gre: Use inner_proto to obtain inner header protocol"), this can be reproduced when the encapsulated packets use gre as the tunneling protocol. The issue happens also with vxlan and geneve tunnels since commit 8bce6d7d0d1e ("udp: Generalize skb_udp_segment"), if the forwarding host's ingress nic has h/w offload for such tunnel and a vxlan/geneve device is configured on top of it, regardless of the configured peer address and vni. To address the issue, this change initialize the inner_protocol field for encapsulated packets in both ipv4 and ipv6 gro complete callbacks. Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Fixes: 8bce6d7d0d1e ("udp: Generalize skb_udp_segment") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: Add a skb_gro_flush_final helper.Steffen Klassert1-1/+1
Add a skb_gro_flush_final helper to prepare for consuming skbs in call_gro_receive. We will extend this helper to not touch the skb if the skb is consumed by a gro callback with a followup patch. We need this to handle the upcomming IPsec ESP callbacks as they reinject the skb to the napi_gro_receive asynchronous. The handler is used in all gro_receive functions that can call the ESP gro handlers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-10gro: Disable frag0 optimization on IPv6 ext headersHerbert Xu1-0/+1
The GRO fast path caches the frag0 address. This address becomes invalid if frag0 is modified by pskb_may_pull or its variants. So whenever that happens we must disable the frag0 optimization. This is usually done through the combination of gro_header_hard and gro_header_slow, however, the IPv6 extension header path did the pulling directly and would continue to use the GRO fast path incorrectly. This patch fixes it by disabling the fast path when we enter the IPv6 extension header path. Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address") Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ip6_offload: check segs for NULL in ipv6_gso_segment.Artem Savkov1-1/+1
segs needs to be checked for being NULL in ipv6_gso_segment() before calling skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference: [ 97.811262] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 97.819112] IP: [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 97.825214] PGD 0 [ 97.827047] [ 97.828540] Oops: 0000 [#1] SMP [ 97.831678] Modules linked in: vhost_net vhost macvtap macvlan nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bridge stp llc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd snd_hda_core edac_core snd_hwdep kvm_amd snd_seq kvm snd_seq_device snd_pcm irqbypass snd_timer ppdev parport_serial snd parport_pc k10temp pcspkr soundcore parport sp5100_tco shpchp sg wmi i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ata_generic pata_acpi amdkfd amd_iommu_v2 radeon broadcom bcm_phy_lib i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci serio_raw tg3 firewire_ohci libahci pata_atiixp drm ptp libata firewire_core pps_core i2c_core crc_itu_t fjes dm_mirror dm_region_hash dm_log dm_mod [ 97.927721] CPU: 1 PID: 3504 Comm: vhost-3495 Not tainted 4.9.0-7.el7.test.x86_64 #1 [ 97.935457] Hardware name: AMD Snook/Snook, BIOS ESK0726A 07/26/2010 [ 97.941806] task: ffff880129a1c080 task.stack: ffffc90001bcc000 [ 97.947720] RIP: 0010:[<ffffffff816e52f9>] [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 97.956251] RSP: 0018:ffff88012fc43a10 EFLAGS: 00010207 [ 97.961557] RAX: 0000000000000000 RBX: ffff8801292c8700 RCX: 0000000000000594 [ 97.968687] RDX: 0000000000000593 RSI: ffff880129a846c0 RDI: 0000000000240000 [ 97.975814] RBP: ffff88012fc43a68 R08: ffff880129a8404e R09: 0000000000000000 [ 97.982942] R10: 0000000000000000 R11: ffff880129a84076 R12: 00000020002949b3 [ 97.990070] R13: ffff88012a580000 R14: 0000000000000000 R15: ffff88012a580000 [ 97.997198] FS: 0000000000000000(0000) GS:ffff88012fc40000(0000) knlGS:0000000000000000 [ 98.005280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.011021] CR2: 00000000000000cc CR3: 0000000126c5d000 CR4: 00000000000006e0 [ 98.018149] Stack: [ 98.020157] 00000000ffffffff ffff88012fc43ac8 ffffffffa017ad0a 000000000000000e [ 98.027584] 0000001300000000 0000000077d59998 ffff8801292c8700 00000020002949b3 [ 98.035010] ffff88012a580000 0000000000000000 ffff88012a580000 ffff88012fc43a98 [ 98.042437] Call Trace: [ 98.044879] <IRQ> [ 98.046803] [<ffffffffa017ad0a>] ? tg3_start_xmit+0x84a/0xd60 [tg3] [ 98.053156] [<ffffffff815eeee0>] skb_mac_gso_segment+0xb0/0x130 [ 98.059158] [<ffffffff815eefd3>] __skb_gso_segment+0x73/0x110 [ 98.064985] [<ffffffff815ef40d>] validate_xmit_skb+0x12d/0x2b0 [ 98.070899] [<ffffffff815ef5d2>] validate_xmit_skb_list+0x42/0x70 [ 98.077073] [<ffffffff81618560>] sch_direct_xmit+0xd0/0x1b0 [ 98.082726] [<ffffffff815efd86>] __dev_queue_xmit+0x486/0x690 [ 98.088554] [<ffffffff8135c135>] ? cpumask_next_and+0x35/0x50 [ 98.094380] [<ffffffff815effa0>] dev_queue_xmit+0x10/0x20 [ 98.099863] [<ffffffffa09ce057>] br_dev_queue_push_xmit+0xa7/0x170 [bridge] [ 98.106907] [<ffffffffa09ce161>] br_forward_finish+0x41/0xc0 [bridge] [ 98.113430] [<ffffffff81627cf2>] ? nf_iterate+0x52/0x60 [ 98.118735] [<ffffffff81627d6b>] ? nf_hook_slow+0x6b/0xc0 [ 98.124216] [<ffffffffa09ce32c>] __br_forward+0x14c/0x1e0 [bridge] [ 98.130480] [<ffffffffa09ce120>] ? br_dev_queue_push_xmit+0x170/0x170 [bridge] [ 98.137785] [<ffffffffa09ce4bd>] br_forward+0x9d/0xb0 [bridge] [ 98.143701] [<ffffffffa09cfbb7>] br_handle_frame_finish+0x267/0x560 [bridge] [ 98.150834] [<ffffffffa09d0064>] br_handle_frame+0x174/0x2f0 [bridge] [ 98.157355] [<ffffffff8102fb89>] ? sched_clock+0x9/0x10 [ 98.162662] [<ffffffff810b63b2>] ? sched_clock_cpu+0x72/0xa0 [ 98.168403] [<ffffffff815eccf5>] __netif_receive_skb_core+0x1e5/0xa20 [ 98.174926] [<ffffffff813659f9>] ? timerqueue_add+0x59/0xb0 [ 98.180580] [<ffffffff815ed548>] __netif_receive_skb+0x18/0x60 [ 98.186494] [<ffffffff815ee625>] process_backlog+0x95/0x140 [ 98.192145] [<ffffffff815edccd>] net_rx_action+0x16d/0x380 [ 98.197713] [<ffffffff8170cff1>] __do_softirq+0xd1/0x283 [ 98.203106] [<ffffffff8170b2bc>] do_softirq_own_stack+0x1c/0x30 [ 98.209107] <EOI> [ 98.211029] [<ffffffff8108a5c0>] do_softirq+0x50/0x60 [ 98.216166] [<ffffffff815ec853>] netif_rx_ni+0x33/0x80 [ 98.221386] [<ffffffffa09eeff7>] tun_get_user+0x487/0x7f0 [tun] [ 98.227388] [<ffffffffa09ef3ab>] tun_sendmsg+0x4b/0x60 [tun] [ 98.233129] [<ffffffffa0b68932>] handle_tx+0x282/0x540 [vhost_net] [ 98.239392] [<ffffffffa0b68c25>] handle_tx_kick+0x15/0x20 [vhost_net] [ 98.245916] [<ffffffffa0abacfe>] vhost_worker+0x9e/0xf0 [vhost] [ 98.251919] [<ffffffffa0abac60>] ? vhost_umem_alloc+0x40/0x40 [vhost] [ 98.258440] [<ffffffff81003a47>] ? do_syscall_64+0x67/0x180 [ 98.264094] [<ffffffff810a44d9>] kthread+0xd9/0xf0 [ 98.268965] [<ffffffff810a4400>] ? kthread_park+0x60/0x60 [ 98.274444] [<ffffffff8170a4d5>] ret_from_fork+0x25/0x30 [ 98.279836] Code: 8b 93 d8 00 00 00 48 2b 93 d0 00 00 00 4c 89 e6 48 89 df 66 89 93 c2 00 00 00 ff 10 48 3d 00 f0 ff ff 49 89 c2 0f 87 52 01 00 00 <41> 8b 92 cc 00 00 00 48 8b 80 d0 00 00 00 44 0f b7 74 10 06 66 [ 98.299425] RIP [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 98.305612] RSP <ffff88012fc43a10> [ 98.309094] CR2: 00000000000000cc [ 98.312406] ---[ end trace 726a2c7a2d2d78d0 ]--- Signed-off-by: Artem Savkov <asavkov@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca1-1/+1
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19gso: Support partial splitting at the frag_list pointerSteffen Klassert1-1/+4
Since commit 8a29111c7 ("net: gro: allow to build full sized skb") gro may build buffers with a frag_list. This can hurt forwarding because most NICs can't offload such packets, they need to be segmented in software. This patch splits buffers with a frag_list at the frag_list pointer into buffers that can be TSO offloaded. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip4ip6: Support for GSO/GROTom Herbert1-1/+32
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip6ip6: Support for GSO/GROTom Herbert1-3/+21
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20net: define gso types for IPx over IPv4 and IPv6Tom Herbert1-2/+2
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20gso: Remove arbitrary checks for unsupported GSOTom Herbert1-18/+0
In several gso_segment functions there are checks of gso_type against a seemingly arbitrary list of SKB_GSO_* flags. This seems like an attempt to identify unsupported GSO types, but since the stack is the one that set these GSO types in the first place this seems unnecessary to do. If a combination isn't valid in the first place that stack should not allow setting it. This is a code simplication especially for add new GSO types. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14GSO: Support partial segmentation offloadAlexander Duyck1-1/+9
This patch adds support for something I am referring to as GSO partial. The basic idea is that we can support a broader range of devices for segmentation if we use fixed outer headers and have the hardware only really deal with segmenting the inner header. The idea behind the naming is due to the fact that everything before csum_start will be fixed headers, and everything after will be the region that is handled by hardware. With the current implementation it allows us to add support for the following GSO types with an inner TSO_MANGLEID or TSO6 offload: NETIF_F_GSO_GRE NETIF_F_GSO_GRE_CSUM NETIF_F_GSO_IPIP NETIF_F_GSO_SIT NETIF_F_UDP_TUNNEL NETIF_F_UDP_TUNNEL_CSUM In the case of hardware that already supports tunneling we may be able to extend this further to support TSO_TCPV4 without TSO_MANGLEID if the hardware can support updating inner IPv4 headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14GRO: Add support for TCP with fixed IPv4 ID field, limit tunnel IP ID valuesAlexander Duyck1-2/+6
This patch does two things. First it allows TCP to aggregate TCP frames with a fixed IPv4 ID field. As a result we should now be able to aggregate flows that were converted from IPv6 to IPv4. In addition this allows us more flexibility for future implementations of segmentation as we may be able to use a fixed IP ID when segmenting the flow. The second thing this does is that it places limitations on the outer IPv4 ID header in the case of tunneled frames. Specifically it forces the IP ID to be incrementing by 1 unless the DF bit is set in the outer IPv4 header. This way we can avoid creating overlapping series of IP IDs that could possibly be fragmented if the frame goes through GRO and is then resegmented via GSO. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14GSO: Add GSO type for fixed IPv4 IDAlexander Duyck1-1/+2
This patch adds support for TSO using IPv4 headers with a fixed IP ID field. This is meant to allow us to do a lossless GRO in the case of TCP flows that use a fixed IP ID such as those that convert IPv6 header to IPv4 headers. In addition I am adding a feature that for now I am referring to TSO with IP ID mangling. Basically when this flag is enabled the device has the option to either output the flow with incrementing IP IDs or with a fixed IP ID regardless of what the original IP ID ordering was. This is useful in cases where the DF bit is set and we do not care if the original IP ID value is maintained. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07udp: Add GRO functions to UDP socketTom Herbert1-2/+0
This patch adds GRO functions (gro_receive and gro_complete) to UDP sockets. udp_gro_receive is changed to perform socket lookup on a packet. If a socket is found the related GRO functions are called. This features obsoletes using UDP offload infrastructure for GRO (udp_offload). This has the advantage of not being limited to provide offload on a per port basis, GRO is now applied to whatever individual UDP sockets are bound to. This also allows the possbility of "application defined GRO"-- that is we can attach something like a BPF program to a UDP socket to perfrom GRO on an application layer protocol. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20tunnels: Don't apply GRO to multiple layers of encapsulation.Jesse Gross1-1/+14
When drivers express support for TSO of encapsulated packets, they only mean that they can do it for one layer of encapsulation. Supporting additional levels would mean updating, at a minimum, more IP length fields and they are unaware of this. No encapsulation device expresses support for handling offloaded encapsulated packets, so we won't generate these types of frames in the transmit path. However, GRO doesn't have a check for multiple levels of encapsulation and will attempt to build them. UDP tunnel GRO actually does prevent this situation but it only handles multiple UDP tunnels stacked on top of each other. This generalizes that solution to prevent any kind of tunnel stacking that would cause problems. Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack") Signed-off-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21ipv6: gro: support sit protocolEric Dumazet1-0/+12
Tom Herbert added SIT support to GRO with commit 19424e052fb4 ("sit: Add gro callbacks to sit_offload"), later reverted by Herbert Xu. The problem came because Tom patch was building GRO packets without proper meta data : If packets were locally delivered, we would not care. But if packets needed to be forwarded, GSO engine was not able to segment individual segments. With the following patch, we correctly set skb->encapsulation and inner network header. We also update gso_type. Tested: Server : netserver modprobe dummy ifconfig dummy0 8.0.0.1 netmask 255.255.255.0 up arp -s 8.0.0.100 4e:32:51:04:47:e5 iptables -I INPUT -s 10.246.7.151 -j TEE --gateway 8.0.0.100 ifconfig sixtofour0 sixtofour0 Link encap:IPv6-in-IPv4 inet6 addr: 2002:af6:798::1/128 Scope:Global inet6 addr: 2002:af6:798::/128 Scope:Global UP RUNNING NOARP MTU:1480 Metric:1 RX packets:411169 errors:0 dropped:0 overruns:0 frame:0 TX packets:409414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20319631739 (20.3 GB) TX bytes:29529556 (29.5 MB) Client : netperf -H 2002:af6:798::1 -l 1000 & Checked on server traffic copied on dummy0 and verify segments were properly rebuilt, with proper IP headers, TCP checksums... tcpdump on eth0 shows proper GRO aggregation takes place. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20Revert "sit: Add gro callbacks to sit_offload"Herbert Xu1-2/+0
This patch reverts 19424e052fb44da2f00d1a868cbb51f3e9f4bbb5 ("sit: Add gro callbacks to sit_offload") because it generates packets that cannot be handled even by our own GSO. Reported-by: Wolfgang Walter <linux@stwm.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for inequality with NULLIan Morris1-1/+1
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2014-11-23ipv6: Do not treat a GSO_TCPV4 request from UDP tunnel over IPv6 as invalidAlexander Duyck1-1/+2
This patch adds SKB_GSO_TCPV4 to the list of supported GSO types handled by the IPv6 GSO offloads. Without this change VXLAN tunnels running over IPv6 do not currently handle IPv4 TCP TSO requests correctly and end up handing the non-segmented frame off to the device. Below is the before and after for a simple netperf TCP_STREAM test between two endpoints tunneling IPv4 over a VXLAN tunnel running on IPv6 on top of a 1Gb/s network adapter. Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.29 0.88 Before 87380 16384 16384 10.03 895.69 After Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Remove MPLS GSO feature.Pravin B Shelar1-1/+0
Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05udp: Changes to udp_offload to support remote checksum offloadTom Herbert1-0/+1
Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: gso: use feature flag argument in all protocol gso handlersFlorian Westphal1-1/+1
skb_gso_segment() has a 'features' argument representing offload features available to the output path. A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use those instead of the provided ones when handing encapsulation/tunnels. Depending on dev->hw_enc_features of the output device skb_gso_segment() can then return NULL even when the caller has disabled all GSO feature bits, as segmentation of inner header thinks device will take care of segmentation. This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs that did not fit the remaining token quota as the segmentation does not work when device supports corresponding hw offload capabilities. Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18ipv6: fix a potential use after free in ip6_offload.cLi RongQing1-0/+1
pskb_may_pull() maybe change skb->data and make opth pointer oboslete, so set the opth again Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net: Remove gso_send_check as an offload callbackTom Herbert1-27/+0
The send_check logic was only interesting in cases of TCP offload and UDP UFO where the checksum needed to be initialized to the pseudo header checksum. Now we've moved that logic into the related gso_segment functions so gso_send_check is no longer needed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09sit: Add gro callbacks to sit_offloadTom Herbert1-0/+2
Add ipv6_gro_receive and ipv6_gro_complete to sit_offload to support GRO. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09ipv6: Clear flush_id to make GRO workTom Herbert1-0/+3
In TCP gro we check flush_id which is derived from the IP identifier. In IPv4 gro path the flush_id is set with the expectation that every matched packet increments IP identifier. In IPv6, the flush_id is never set and thus is uinitialized. What's worse is that in IPv6 over IPv4 encapsulation, the IP identifier is taken from the outer header which is currently not incremented on every packet for Linux stack, so GRO in this case never matches packets (identifier is not increasing). This patch clears flush_id for every time for a matched packet in IPv6 gro_receive. We need to do this each time to overwrite the setting that would be done in IPv4 gro_receive per the outer header in IPv6 over Ipv4 encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24ipv6: White-space cleansing : Line LayoutsIan Morris1-1/+1
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04gre: Call gso_make_checksumTom Herbert1-0/+1
Call gso_make_checksum. This should have the benefit of using a checksum that may have been previously computed for the packet. This also adds NETIF_F_GSO_GRE_CSUM to differentiate devices that offload GRE GSO with and without the GRE checksum offloaed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04net: Add GSO support for UDP tunnels with checksumTom Herbert1-0/+1
Added a new netif feature for GSO_UDP_TUNNEL_CSUM. This indicates that a device is capable of computing the UDP checksum in the encapsulating header of a UDP tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-21ipv6: gro: fix CHECKSUM_COMPLETE supportEric Dumazet1-5/+1
When GRE support was added in linux-3.14, CHECKSUM_COMPLETE handling broke on GRE+IPv6 because we did not update/use the appropriate csum : GRO layer is supposed to use/update NAPI_GRO_CB(skb)->csum instead of skb->csum Tested using a GRE tunnel and IPv6 traffic. GRO aggregation now happens at the first level (ethernet device) instead of being done in gre tunnel. Native IPv6+TCP is still properly aggregated. Fixes: bf5a755f5e918 ("net-gre-gro: Add GRE support to the GRO stack") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25ipv4: ipv6: better estimate tunnel header cut for correct ufo handlingHannes Frederic Sowa1-8/+12
Currently the UFO fragmentation process does not correctly handle inner UDP frames. (The following tcpdumps are captured on the parent interface with ufo disabled while tunnel has ufo enabled, 2000 bytes payload, mtu 1280, both sit device): IPv6: 16:39:10.031613 IP (tos 0x0, ttl 64, id 3208, offset 0, flags [DF], proto IPv6 (41), length 1300) 192.168.122.151 > 1.1.1.1: IP6 (hlim 64, next-header Fragment (44) payload length: 1240) 2001::1 > 2001::8: frag (0x00000001:0|1232) 44883 > distinct: UDP, length 2000 16:39:10.031709 IP (tos 0x0, ttl 64, id 3209, offset 0, flags [DF], proto IPv6 (41), length 844) 192.168.122.151 > 1.1.1.1: IP6 (hlim 64, next-header Fragment (44) payload length: 784) 2001::1 > 2001::8: frag (0x00000001:0|776) 58979 > 46366: UDP, length 5471 We can see that fragmentation header offset is not correctly updated. (fragmentation id handling is corrected by 916e4cf46d0204 ("ipv6: reuse ip6_frag_id from ip6_ufo_append_data")). IPv4: 16:39:57.737761 IP (tos 0x0, ttl 64, id 3209, offset 0, flags [DF], proto IPIP (4), length 1296) 192.168.122.151 > 1.1.1.1: IP (tos 0x0, ttl 64, id 57034, offset 0, flags [none], proto UDP (17), length 1276) 192.168.99.1.35961 > 192.168.99.2.distinct: UDP, length 2000 16:39:57.738028 IP (tos 0x0, ttl 64, id 3210, offset 0, flags [DF], proto IPIP (4), length 792) 192.168.122.151 > 1.1.1.1: IP (tos 0x0, ttl 64, id 57035, offset 0, flags [none], proto UDP (17), length 772) 192.168.99.1.13531 > 192.168.99.2.20653: UDP, length 51109 In this case fragmentation id is incremented and offset is not updated. First, I aligned inet_gso_segment and ipv6_gso_segment: * align naming of flags * ipv6_gso_segment: setting skb->encapsulation is unnecessary, as we always ensure that the state of this flag is left untouched when returning from upper gso segmenation function * ipv6_gso_segment: move skb_reset_inner_headers below updating the fragmentation header data, we don't care for updating fragmentation header data * remove currently unneeded comment indicating skb->encapsulation might get changed by upper gso_segment callback (gre and udp-tunnel reset encapsulation after segmentation on each fragment) If we encounter an IPIP or SIT gso skb we now check for the protocol == IPPROTO_UDP and that we at least have already traversed another ip(6) protocol header. The reason why we have to special case GSO_IPIP and GSO_SIT is that we reset skb->encapsulation to 0 while skb_mac_gso_segment the inner protocol of GSO_UDP_TUNNEL or GSO_GRE packets. Reported-by: Wolfgang Walter <linux@stwm.de> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07net-gre-gro: Add GRE support to the GRO stackJerry Chu1-1/+1
This patch built on top of Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5dcd8755715c7143b4571d5c44f01796f1 "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-15net-ipv6: Fix alleged compiler warning in ipv6_exthdrs_len()Jerry Chu1-8/+4
It was reported that Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") triggered a compiler warning in ipv6_exthdrs_len(): net/ipv6/ip6_offload.c: In function ‘ipv6_gro_complete’: net/ipv6/ip6_offload.c:178:24: warning: ‘optlen’ may be used uninitialized in this function [-Wmaybe-u opth = (void *)opth + optlen; ^ net/ipv6/ip6_offload.c:164:22: note: ‘optlen’ was declared here int len = 0, proto, optlen; ^ Note that there was no real bug here - optlen was never uninitialized before use. (Was the version of gcc I used smarter to not complain?) Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-14ipv6: fix compiler warning in ipv6_exthdrs_lenHannes Frederic Sowa1-4/+5
Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") used an uninitialized variable which leads to the following compiler warning: net/ipv6/ip6_offload.c: In function ‘ipv6_gro_complete’: net/ipv6/ip6_offload.c:178:24: warning: ‘optlen’ may be used uninitialized in this function [-Wmaybe-uninitialized] opth = (void *)opth + optlen; ^ net/ipv6/ip6_offload.c:164:22: note: ‘optlen’ was declared here int len = 0, proto, optlen; ^ Fix it up. Cc: Jerry Chu <hkchu@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12net-gro: Prepare GRO stack for the upcoming tunneling supportJerry Chu1-10/+44
This patch modifies the GRO stack to avoid the use of "network_header" and associated macros like ip_hdr() and ipv6_hdr() in order to allow an arbitary number of IP hdrs (v4 or v6) to be used in the encapsulation chain. This lays the foundation for various IP tunneling support (IP-in-IP, GRE, VXLAN, SIT,...) to be added later. With this patch, the GRO stack traversing now is mostly based on skb_gro_offset rather than special hdr offsets saved in skb (e.g., skb->network_header). As a result all but the top layer (i.e., the the transport layer) must have hdrs of the same length in order for a pkt to be considered for aggregation. Therefore when adding a new encap layer (e.g., for tunneling), one must check and skip flows (e.g., by setting NAPI_GRO_CB(p)->same_flow to 0) that have a different hdr length. Note that unlike the network header, the transport header can and will continue to be set by the GRO code since there will be at most one "transport layer" in the encap chain. Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21ipv6: sit: add GSO/TSO supportEric Dumazet1-0/+11
Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21ipv6: gso: make ipv6_gso_segment() stackableEric Dumazet1-6/+17
In order to support GSO on SIT tunnels, we need to make inet_gso_segment() stackable. It should not assume network header starts right after mac header. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19ipip: add GSO/TSO supportEric Dumazet1-0/+1
Now inet_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for IPIP Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO IPIP support) : Before patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3357.88 5.09 3.70 2.983 2.167 After patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 7710.19 4.52 6.62 1.152 1.687 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19ipv6: gso: remove redundant lockingEric Dumazet1-4/+1
ipv6_gso_send_check() and ipv6_gso_segment() are called by skb_mac_gso_segment() under rcu lock, no need to use rcu_read_lock() / rcu_read_unlock() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31ipv6: Add generic UDP Tunnel segmentationCong Wang1-1/+3
Similar to commit 731362674580cb0c696cd1b1a03d8461a10cf90a (tunneling: Add generic Tunnel segmentation) This patch adds generic tunneling offloading support for IPv6-UDP based tunnels. This can be used by tunneling protocols like VXLAN. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27MPLS: Add limited GSO supportSimon Horman1-0/+1
In the case where a non-MPLS packet is received and an MPLS stack is added it may well be the case that the original skb is GSO but the NIC used for transmit does not support GSO of MPLS packets. The aim of this code is to provide GSO in software for MPLS packets whose skbs are GSO. SKB Usage: When an implementation adds an MPLS stack to a non-MPLS packet it should do the following to skb metadata: * Set skb->inner_protocol to the old non-MPLS ethertype of the packet. skb->inner_protocol is added by this patch. * Set skb->protocol to the new MPLS ethertype of the packet. * Set skb->network_header to correspond to the end of the L3 header, including the MPLS label stack. I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to kernel" which adds MPLS support to the kernel datapath of Open vSwtich. That patch sets the above requirements in datapath/actions.c:push_mpls() and was used to exercise this code. The datapath patch is against the Open vSwtich tree but it is intended that it be added to the Open vSwtich code present in the mainline Linux kernel at some point. Features: I believe that the approach that I have taken is at least partially consistent with the handling of other protocols. Jesse, I understand that you have some ideas here. I am more than happy to change my implementation. This patch adds dev->mpls_features which may be used by devices to advertise features supported for MPLS packets. A new NETIF_F_MPLS_GSO feature is added for devices which support hardware MPLS GSO offload. Currently no devices support this and MPLS GSO always falls back to software. Alternate Implementation: One possible alternate implementation is to teach netif_skb_features() and skb_network_protocol() about MPLS, in a similar way to their understanding of VLANs. I believe this would avoid the need for net/mpls/mpls_gso.c and in particular the calls to __skb_push() and __skb_push() in mpls_gso_segment(). I have decided on the implementation in this patch as it should not introduce any overhead in the case where mpls_gso is not compiled into the kernel or inserted as a module. MPLS GSO suggested by Jesse Gross. Based in part on "v4 GRE: Add TCP segmentation offload for GRE" by Pravin B Shelar. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09tunneling: Add generic Tunnel segmentation.Pravin B Shelar1-0/+1
Adds generic tunneling offloading support for IPv4-UDP based tunnels. GSO type is added to request this offload for a skb. netdev feature NETIF_F_UDP_TUNNEL is added for hardware offloaded udp-tunnel support. Currently no device supports this feature, software offload is used. This can be used by tunneling protocols like VXLAN. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09net: Kill link between CSUM and SG features.Pravin B Shelar1-3/+0
Earlier SG was unset if CSUM was not available for given device to force skb copy to avoid sending inconsistent csum. Commit c9af6db4c11c (net: Fix possible wrong checksum generation) added explicit flag to force copy to fix this issue. Therefore there is no need to link SG and CSUM, following patch kills this link between there two features. This patch is also required following patch in series. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.