aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-20net: sock: replace sk_state_load with inet_sk_state_load and remove sk_state_storeYafang Shao1-1/+1
sk_state_load is only used by AF_INET/AF_INET6, so rename it to inet_sk_state_load and move it into inet_sock.h. sk_state_store is removed as it is not used any more. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20ip6_gre: fix potential memory leak in ip6erspan_rcvHaishuang Yan1-1/+3
If md is NULL, tun_dst must be freed, otherwise it will cause memory leak. Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode") Cc: William Tu <u9012063@gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20ip6_gre: fix error path when ip6erspan_rcv failedHaishuang Yan1-1/+2
Same as ipv4 code, when ip6erspan_rcv call return PACKET_REJECT, we should call icmpv6_send to send icmp unreachable message in error path. Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Acked-by: William Tu <u9012063@gmail.com> Cc: William Tu <u9012063@gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20ip6_gre: fix a pontential issue in ip6erspan_rcvHaishuang Yan1-3/+2
pskb_may_pull() can change skb->data, so we need to load ipv6h/ershdr at the right place. Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Cc: William Tu <u9012063@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20ip6_vti: adjust vti mtu according to mtu of lower deviceAlexey Kodanev1-0/+20
LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: erspan: reload pointer after pskb_may_pullWilliam Tu1-1/+3
pskb_may_pull() can change skb->data, so we need to re-load pkt_md and ershdr at the right place. Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: William Tu <u9012063@gmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: erspan: fix wrong return valueWilliam Tu1-1/+1
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM. Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: William Tu <u9012063@gmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-13/+23
Three sets of overlapping changes, two in the packet scheduler and one in the meson-gxl PHY driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15ip6_gre: add erspan v2 supportWilliam Tu1-16/+104
Similar to support for ipv4 erspan, this patch adds erspan v2 to ip6erspan tunnel. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: erspan: refactor existing erspan codeWilliam Tu1-9/+16
The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-2/+7
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The follow patchset contains Netfilter fixes for your net tree, they are: 1) Fix compilation warning in x_tables with clang due to useless redundant reassignment, from Colin Ian King. 2) Add bugtrap to net_exit to catch uninitialized lists, patch from Vasily Averin. 3) Fix out of bounds memory reads in H323 conntrack helper, this comes with an initial patch to remove replace the obscure CHECK_BOUND macro as a dependency. From Eric Sesterhenn. 4) Reduce retransmission timeout when window is 0 in TCP conntrack, from Florian Westphal. 6) ctnetlink clamp timeout to INT_MAX if timeout is too large, otherwise timeout wraps around and it results in killing the entry that is being added immediately. 7) Missing CAP_NET_ADMIN checks in cthelper and xt_osf, due to no netns support. From Kevin Cernekee. 8) Missing maximum number of instructions checks in xt_bpf, patch from Jann Horn. 9) With no CONFIG_PROC_FS ipt_CLUSTERIP compilation breaks, patch from Arnd Bergmann. 10) Missing netlink attribute policy in nftables exthdr, from Florian Westphal. 11) Enable conntrack with IPv6 MASQUERADE rules, as a357b3f80bc8 should have done in first place, from Konstantin Khlebnikov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13ipv6: mcast: better catch silly mtu valuesEric Dumazet1-10/+15
syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-12tcp md5sig: Use skb's saddr when replying to an incoming segmentChristoph Paasch1-1/+1
The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11netfilter: ip6t_MASQUERADE: add dependency on conntrack moduleKonstantin Khlebnikov1-1/+7
After commit 4d3a57f23dec ("netfilter: conntrack: do not enable connection tracking unless needed") conntrack is disabled by default unless some module explicitly declares dependency in particular network namespace. Fixes: a357b3f80bc8 ("netfilter: nat: add dependencies on conntrack module") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-12-11rhashtable: Change rhashtable_walk_start to return voidTom Herbert2-6/+2
Most callers of rhashtable_walk_start don't care about a resize event which is indicated by a return value of -EAGAIN. So calls to rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something like this is common: ret = rhashtable_walk_start(rhiter); if (ret && ret != -EAGAIN) goto out; Since zero and -EAGAIN are the only possible return values from the function this check is pointless. The condition never evaluates to true. This patch changes rhashtable_walk_start to return void. This simplifies code for the callers that ignore -EAGAIN. For the few cases where the caller cares about the resize event, particularly where the table can be walked in mulitple parts for netlink or seq file dump, the function rhashtable_walk_start_check has been added that returns -EAGAIN on a resize event. Signed-off-by: Tom Herbert <tom@quantonium.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflict was two parallel additions of include files to sch_generic.c, no biggie. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07adding missing rcu_read_unlock in ipxip6_rcvNikita V. Shirokov1-1/+1
commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-06ip6_gre: add ip6 erspan collect_md modeWilliam Tu1-25/+85
Similar to ip6 gretap and ip4 gretap, the patch allows erspan tunnel to operate in collect metadata mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-5/+7
Small overlapping change conflict ('net' changed a line, 'net-next' added a line right afterwards) in flexcan.c Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04rtnetlink: ipv6: convert remaining users to rtnl_register_moduleFlorian Westphal3-11/+26
convert remaining users of rtnl_register to rtnl_register_module and un-export rtnl_register. Requested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04rtnetlink: remove __rtnl_registerFlorian Westphal4-28/+53
This removes __rtnl_register and switches callers to either rtnl_register or rtnl_register_module. Also, rtnl_register() will now print an error if memory allocation failed rather than panic the kernel. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04ip6_gre: add ip6 gre and gretap collect_md modeWilliam Tu2-11/+99
Similar to gre, vxlan, geneve, ipip tunnels, allow ip6 gre and gretap tunnels to operate in collect metadata mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. OVS can use it as well in the future. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()Eric Dumazet1-4/+6
James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf7f9d ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03inet: Add a 2nd listener hashtable (port+addr)Martin KaFai Lau1-0/+66
The current listener hashtable is hashed by port only. When a process is listening at many IP addresses with the same port (e.g. [IP1]:443, [IP2]:443... [IPN]:443), the inet[6]_lookup_listener() performance is degraded to a link list. It is prone to syn attack. UDP had a similar issue and a second hashtable was added to resolve it. This patch adds a second hashtable for the listener's sockets. The second hashtable is hashed by port and address. It cannot reuse the existing skc_portaddr_node which is shared with skc_bind_node. TCP listener needs to use skc_bind_node. Instead, this patch adds a hlist_node 'icsk_listen_portaddr_node' to the inet_connection_sock which the listener (like TCP) also belongs to. The new portaddr hashtable may need two lookup (First by IP:PORT. Second by INADDR_ANY:PORT if the IP:PORT is a not found). Hence, it implements a similar cut off as UDP such that it will only consult the new portaddr hashtable if the current port-only hashtable has >10 sk in the link-list. lhash2 and lhash2_mask are added to 'struct inet_hashinfo'. I take this chance to plug a 4 bytes hole. It is done by first moving the existing bind_bucket_cachep up and then add the new (int lhash2_mask, *lhash2) after the existing bhash_size. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03udp: Move udp[46]_portaddr_hash() to net/ip[v6].hMartin KaFai Lau1-24/+8
This patch moves the udp[46]_portaddr_hash() to net/ip[v6].h. The function name is renamed to ipv[46]_portaddr_hash(). It will be used by a later patch which adds a second listener hashtable hashed by the address and port. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01ip6_gre: Add ERSPAN native tunnel supportWilliam Tu1-4/+266
The patch adds support for ERSPAN tunnel over ipv6. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01ip6_gre: Refactor ip6gre xmit codesWilliam Tu1-48/+75
This patch refactors the ip6gre_xmit_{ipv4, ipv6}. It is a prep work to add the ip6erspan tunnel. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30net/reuseport: drop legacy codePaolo Abeni2-27/+6
Since commit e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") and commit c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") the relevant reuseport socket matching the current packet is selected by the reuseport_select_sock() call. The only exceptions are invalid BPF filters/filters returning out-of-range indices. In the latter case the code implicitly falls back to using the hash demultiplexing, but instead of selecting the socket inside the reuseport_select_sock() function, it relies on the hash selection logic introduced with the early soreuseport implementation. With this patch, in case of a BPF filter returning a bad socket index value, we fall back to hash-based selection inside the reuseport_select_sock() body, so that we can drop some duplicate code in the ipv4 and ipv6 stack. This also allows faster lookup in the above scenario and will allow us to avoid computing the hash value for successful, BPF based demultiplexing - in a later patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30sit: update frag_off infoHangbin Liu1-0/+1
After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30tcp: remove buggy call to tcp_v6_restore_cb()Eric Dumazet1-1/+0
tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as used in TCP stack. MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus TCP_SKB_CB(skb)->header.h6 This patch probably fixes RST packets sent on behalf of a timewait md5 ipv6 socket. Before Florian patch, tcp_v6_restore_cb() was needed before jumping to no_tcp_socket label. Fixes: 271c3b9b7bda ("tcp: honour SO_BINDTODEVICE for TW_RST case too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30xfrm: Move dst->path into struct xfrm_dstDavid Miller2-8/+2
The first member of an IPSEC route bundle chain sets it's dst->path to the underlying ipv4/ipv6 route that carries the bundle. Stated another way, if one were to follow the xfrm_dst->child chain of the bundle, the final non-NULL pointer would be the path and point to either an ipv4 or an ipv6 route. This is largely used to make sure that PMTU events propagate down to the correct ipv4 or ipv6 route. When we don't have the top of an IPSEC bundle 'dst->path == dst'. Move it down into xfrm_dst and key off of dst->xfrm. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30ipv6: Move dst->from into struct rt6_info.David Miller1-17/+17
The dst->from value is only used by ipv6 routes to track where a route "came from". Any time we clone or copy a core ipv6 route in the ipv6 routing tables, we have the copy/clone's ->from point to the base route. This is used to handle route expiration properly. Only ipv6 uses this mechanism, and only ipv6 code references it. So it is safe to move it into rt6_info. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30net: Create and use new helper xfrm_dst_child().David Miller2-2/+2
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC routes are identified by a non-NULL dst->xfrm pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30ipv6: Move rt6_next from dst_entry into ipv6 route structure.David Miller2-18/+18
Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-25Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds5-34/+31
Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
2017-11-24net: accept UFO datagrams from tuntap and packetWillem de Bruijn2-3/+113
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: ipv6: Fixup device for anycast routes during copyDavid Ahern1-1/+1
Florian reported a breakage with anycast routes due to commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). Prior to this commit anycast routes were added against the loopback device causing repetitive route entries with no insight into why they existed. e.g.: $ ip -6 ro ls table local type anycast anycast 2001:db8:1:: dev lo proto kernel metric 0 pref medium anycast 2001:db8:2:: dev lo proto kernel metric 0 pref medium anycast fe80:: dev lo proto kernel metric 0 pref medium anycast fe80:: dev lo proto kernel metric 0 pref medium The point of commit 4832c30d5458 is to add the routes using the device with the address which is causing the route to be added. e.g.,: $ ip -6 ro ls table local type anycast anycast 2001:db8:1:: dev eth1 proto kernel metric 0 pref medium anycast 2001:db8:2:: dev eth2 proto kernel metric 0 pref medium anycast fe80:: dev eth2 proto kernel metric 0 pref medium anycast fe80:: dev eth1 proto kernel metric 0 pref medium For traffic to work as it did before, the dst device needs to be switched to the loopback when the copy is created similar to local routes. Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24ipv6: Do not consider linkdown nexthops during multipathIdo Schimmel1-0/+5
When the 'ignore_routes_with_linkdown' sysctl is set, we should not consider linkdown nexthops during route lookup. While the code correctly verifies that the initially selected route ('match') has a carrier, it does not perform the same check in the subsequent multipath selection, resulting in a potential packet loss. In case the chosen route does not have a carrier and the sysctl is set, choose the initially selected route. Fixes: 35103d11173b ("net: ipv6 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup() (2 field)Kees Cook1-4/+6
This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook3-28/+23
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook1-2/+2
This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-20netfilter: remove redundant assignment to eColin Ian King1-1/+0
The assignment to variable e is redundant since the same assignment occurs just a few lines later, hence it can be removed. Cleans up clang warning for arp_tables, ip_tables and ip6_tables: warning: Value stored to 'e' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-11-19gre6: use log_ecn_error module parameter in ip6_tnl_rcv()Alexey Kodanev1-1/+1
After commit 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") it's not used anywhere in the module, but previously was used in ip6gre_rcv(). Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds36-1044/+1869
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-15tcp: Namespace-ify sysctl_tcp_default_congestion_controlStephen Hemminger1-1/+2
Make default TCP default congestion control to a per namespace value. This changes default congestion control to a pointer to congestion ops (rather than implicit as first element of available lsit). The congestion control setting of new namespaces is inherited from the current setting of the root namespace. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15ipv6: set all.accept_dad to 0 by defaultNicolas Dichtel1-1/+1
With commits 35e015e1f577 and a2d3f3e33853, the global 'accept_dad' flag is also taken into account (default value is 1). If either global or per-interface flag is non-zero, DAD will be enabled on a given interface. This is not backward compatible: before those patches, the user could disable DAD just by setting the per-interface flag to 0. Now, the user instead needs to set both flags to 0 to actually disable DAD. Restore the previous behaviour by setting the default for the global 'accept_dad' flag to 0. This way, DAD is still enabled by default, as per-interface flags are set to 1 on device creation, but setting them to 0 is enough to disable DAD on a given interface. - Before 35e015e1f57a7 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes X 0 no X 1 yes - After 35e015e1f577 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes 0 0 no 0 1 yes 1 0 yes - After this fix: global per-interface DAD enabled 1 1 yes 0 0 no [default] 0 1 yes 1 0 yes Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Fixes: a2d3f3e33853 ("ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real") CC: Stefano Brivio <sbrivio@redhat.com> CC: Matteo Croce <mcroce@redhat.com> CC: Erik Kline <ek@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-2/+2
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-14xfrm6_tunnel: exit_net cleanup check addedVasily Averin1-0/+8
Be sure that spi_byaddr and spi_byspi arrays initialized in net_init hook were return to initial state Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-13ip6_tunnel: clean up ip4ip6 and ip6ip6's err_handlersXin Long1-28/+14
This patch is to remove some useless codes of redirect and fix some indents on ip4ip6 and ip6ip6's err_handlers. Note that redirect icmp packet is already processed in ip6_tnl_err, the old redirect codes in ip4ip6_err actually never worked even before this patch. Besides, there's no need to send redirect to user's sk, it's for lower dst, so just remove it in this patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.