aboutsummaryrefslogtreecommitdiffstats
path: root/net/kcm (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-06xen: update xen headersJuergen Gross2-10/+31
Update some Xen headers to be able to use new functionality. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop superfluous variablesJan Beulich1-10/+6
req_start is simply an alias of the "offset" function parameter, and req_end is being used just once in each function. (And both variables were loop invariant anyway, so should at least have got initialized outside the loop.) Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: short-circuit read path used for merging write valuesJan Beulich1-4/+2
There's no point calling xen_pcibk_config_read() here - all it'll do is return whatever conf_space_read() returns for the field which was found here (and which would be found there again). Also there's no point clearing tmp_val before the call. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: use const and unsigned in bar_init()Jan Beulich1-2/+2
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: simplify determination of 64-bit memory resourceJan Beulich1-4/+1
Other than for raw BAR values, flags are properly separated in the internal representation. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: fold read_dev_bar() into its now single callerJan Beulich1-20/+13
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop rom_init()Jan Beulich1-13/+1
It is now identical to bar_init(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop unused function parameter of read_dev_bar()Jan Beulich1-4/+3
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06x86/xen: Use DIV_ROUND_UPAmitoj Kaur Chawla1-2/+2
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /(d)) but is perhaps more readable. The Coccinelle script used to make this change is as follows: @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: xenbus: Remove create_workqueueBhaktipriya Shridhar1-14/+1
System workqueues have been able to handle high level of concurrency for a long time now and there's no reason to use dedicated workqueues just to gain concurrency. Replace dedicated xenbus_frontend_wq with the use of system_wq. Unlike a dedicated per-cpu workqueue created with create_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantees unless the target CPU is explicitly specified and the increase of local concurrency shouldn't make any difference. In this case, there is only a single work item, increase of concurrency level by switching to system_wq should not make any difference. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: xen-pciback: Remove create_workqueueBhaktipriya Shridhar3-11/+2
System workqueues have been able to handle high level of concurrency for a long time now and there's no reason to use dedicated workqueues just to gain concurrency. Replace dedicated xen_pcibk_wq with the use of system_wq. Unlike a dedicated per-cpu workqueue created with create_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantees unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Since the work items could be pending, flush_work() has been used in xen_pcibk_disconnect(). xen_pcibk_xenbus_remove() calls free_pdev() which in turn calls xen_pcibk_disconnect() for every pdev to ensure that there is no pending task while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen/PMU: Log VPMU initialization error at lower levelBoris Ostrovsky1-1/+1
This will match how PMU errors are reported at check_hw_exists()'s msr_fail label, which is reached when VPMU initialzation fails. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: add steal_clock support on x86Juergen Gross6-69/+25
The pv_time_ops structure contains a function pointer for the "steal_clock" functionality used only by KVM and Xen on ARM. Xen on x86 uses its own mechanism to account for the "stolen" time a thread wasn't able to run due to hypervisor scheduling. Add support in Xen arch independent time handling for this feature by moving it out of the arm arch into drivers/xen and remove the x86 Xen hack. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: use vma_pages().Muhammad Falak R Wani3-3/+3
Replace explicit computation of vma page count by a call to vma_pages(). Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06Xen: EFI: Parse DT parameters for Xen specific UEFIShannon Zhao3-16/+92
The EFI DT parameters for bare metal are located under /chosen node, while for Xen Dom0 they are located under /hyperviosr/uefi node. These parameters under /chosen and /hyperviosr/uefi are not expected to appear at the same time. Parse these EFI parameters and initialize EFI like the way for bare metal except the runtime services because the runtime services for Xen Dom0 are available through hypercalls and they are always enabled. So it sets the EFI_RUNTIME_SERVICES flag if it finds /hyperviosr/uefi node and bails out in arm_enable_runtime_services() when EFI_RUNTIME_SERVICES flag is set already. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-07-06FDT: Add a helper to get the subnode by given nameShannon Zhao2-0/+15
Sometimes it needs to check if there is a subnode of given node in FDT by given name. Introduce this helper to get the subnode if it exists. CC: Rob Herring <robh@kernel.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06ARM64: XEN: Add a function to initialize Xen specific UEFI runtime servicesShannon Zhao6-1/+55
When running on Xen hypervisor, runtime services are supported through hypercall. Add a Xen specific function to initialize runtime services. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-06XEN: EFI: Move x86 specific codes to architecture directoryShannon Zhao3-147/+167
Move x86 specific codes to architecture directory and export those EFI runtime service functions. This will be useful for initializing runtime service on ARM later. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-07-06ARM: Xen: Document UEFI support on Xen ARM virtual platformsShannon Zhao1-0/+35
Add a "uefi" node under /hypervisor node in FDT, then Linux kernel could scan this to get the UEFI information. CC: Rob Herring <robh@kernel.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06ARM: XEN: Move xen_early_init() before efi_init()Shannon Zhao3-18/+43
Move xen_early_init() before efi_init(), then when calling efi_init() could initialize Xen specific UEFI. Check if it runs on Xen hypervisor through the flat dts. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-06arm/xen: Get event-channel irq through HVM_PARAM when booting with ACPIShannon Zhao1-1/+35
The kernel will get the event-channel IRQ through HVM_PARAM_CALLBACK_IRQ. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06xen/hvm/params: Add a new delivery type for event-channel in HVM_PARAM_CALLBACK_IRQShannon Zhao1-0/+13
This new delivery type which is for ARM shares the same value with HVM_PARAM_CALLBACK_TYPE_VECTOR which is for x86. val[15:8] is flag: val[7:0] is a PPI. To the flag, bit 8 stands the interrupt mode is edge(1) or level(0) and bit 9 stands the interrupt polarity is active low(1) or high(0). Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: public/hvm: sync changes of HVM_PARAM_CALLBACK_VIA ABI from XenShannon Zhao1-6/+21
Sync the changes of HVM_PARAM_CALLBACK_VIA ABI introduced by Xen commit <ca5c54b6ff05> (public/hvm: export the HVM_PARAM_CALLBACK_VIA ABI in the API). Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: ARM: Add support for mapping AMBA device mmioShannon Zhao1-0/+43
Add a bus_notifier for AMBA bus device in order to map the device mmio regions when DOM0 booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: ARM: Add support for mapping platform device mmioShannon Zhao2-0/+154
Add a bus_notifier for platform bus device in order to map the device mmio regions when DOM0 booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06xen: memory : Add new XENMAPSPACE type XENMAPSPACE_dev_mmioShannon Zhao1-0/+1
Add a new type of Xen map space for Dom0 to map device's MMIO region. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06arm/xen: Use xen_xlate_map_ballooned_pages to setup grant tableShannon Zhao1-9/+4
Use xen_xlate_map_ballooned_pages to setup grant table. Then it doesn't rely on DT or ACPI to pass the start address and size of grant table. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: xlate: Use page_to_xen_pfn instead of page_to_pfnShannon Zhao1-11/+27
Make xen_xlate_map_ballooned_pages work with 64K pages. In that case Kernel pages are 64K in size but Xen pages remain 4K in size. Xen pfns refer to 4K pages. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06xen/grant-table: Move xlated_setup_gnttab_pages to common placeShannon Zhao3-51/+69
Move xlated_setup_gnttab_pages to common place, so it can be reused by ARM to setup grant table. Rename it to xen_xlate_map_ballooned_pages. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: ACPI: Hide UART used by XenShannon Zhao1-0/+74
ACPI 6.0 introduces a new table STAO to list the devices which are used by Xen and can't be used by Dom0. On Xen virtual platforms, the physical UART is used by Xen. So here it hides UART from Dom0. CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) CC: Len Brown <lenb@kernel.org> (supporter:ACPI) CC: linux-acpi@vger.kernel.org (open list:ACPI) Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-03Linux 4.7-rc6Linus Torvalds1-1/+1
2016-07-03ovl: warn instead of error if d_type is not supportedVivek Goyal1-5/+7
overlay needs underlying fs to support d_type. Recently I put in a patch in to detect this condition and started failing mount if underlying fs did not support d_type. But this breaks existing configurations over kernel upgrade. Those who are running docker (partially broken configuration) with xfs not supporting d_type, are surprised that after kernel upgrade docker does not run anymore. https://github.com/docker/docker/issues/22937#issuecomment-229881315 So instead of erroring out, detect broken configuration and warn about it. This should allow existing docker setups to continue working after kernel upgrade. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 45aebeaf4f67 ("ovl: Ensure upper filesystem supports d_type") Cc: <stable@vger.kernel.org> 4.6
2016-07-02MIPS: Fix possible corruption of cache mode by mprotect.Ralf Baechle1-4/+6
The following testcase may result in a page table entries with a invalid CCA field being generated: static void *bindstack; static int sysrqfd; static void protect_low(int protect) { mprotect(bindstack, BINDSTACK_SIZE, protect); } static void sigbus_handler(int signal, siginfo_t * info, void *context) { void *addr = info->si_addr; write(sysrqfd, "x", 1); printf("sigbus, fault address %p (should not happen, but might)\n", addr); abort(); } static void run_bind_test(void) { unsigned int *p = bindstack; p[0] = 0xf001f001; write(sysrqfd, "x", 1); /* Set trap on access to p[0] */ protect_low(PROT_NONE); write(sysrqfd, "x", 1); /* Clear trap on access to p[0] */ protect_low(PROT_READ | PROT_WRITE | PROT_EXEC); write(sysrqfd, "x", 1); /* Check the contents of p[0] */ if (p[0] != 0xf001f001) { write(sysrqfd, "x", 1); /* Reached, but shouldn't be */ printf("badness, shouldn't happen but does\n"); abort(); } } int main(void) { struct sigaction sa; sysrqfd = open("/proc/sysrq-trigger", O_WRONLY); if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) { perror("sigprocmask"); return 0; } sa.sa_sigaction = sigbus_handler; sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART; if (sigaction(SIGBUS, &sa, NULL)) { perror("sigaction"); return 0; } bindstack = mmap(NULL, BINDSTACK_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (bindstack == MAP_FAILED) { perror("mmap bindstack"); return 0; } printf("bindstack: %p\n", bindstack); run_bind_test(); printf("done\n"); return 0; } There are multiple ingredients for this: 1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3 on all platforms except SB1 where it's CCA 5. 2) _page_cachable_default must have bits set which are not set _CACHE_CACHABLE_NONCOHERENT. 3) Either the defective version of pte_modify for XPA or the standard version must be in used. However pte_modify for the 36 bit address space support is no affected. In that case additional bits in the final CCA mode may generate an invalid value for the CCA field. On the R10000 system where this was tracked down for example a CCA 7 has been observed, which is Uncached Accelerated. Fixed by: 1) Using the proper CCA mode for PAGE_NONE just like for all the other PAGE_* pte/pmd bits. 2) Fix the two affected variants of pte_modify. Further code inspection also shows the same issue to exist in pmd_modify which would affect huge page systems. Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE and pmd_modify issue found by me. The history of this goes back beyond Linus' git history. Chris Dearman's commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 ("[MIPS] Allow setting of the cache attribute at run time.") missed the opportunity to fix this but it was originally introduced in lmo commit d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.") and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option CONFIG_MIPS_UNCACHED.") Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
2016-07-01locks: use file_inode()Miklos Szeredi1-1/+1
(Another one for the f_path debacle.) ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask. The reason is that generic_add_lease() used filp->f_path.dentry->inode while all the others use file_inode(). This makes a difference for files opened on overlayfs since the former will point to the overlay inode the latter to the underlying inode. So generic_add_lease() added the lease to the overlay inode and generic_delete_lease() removed it from the underlying inode. When the file was released the lease remained on the overlay inode's lock list, resulting in use after free. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-07-01usb: dwc3: st: Use explicit reset_control_get_exclusive() APILee Jones1-1/+2
We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-01phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() APILee Jones1-1/+1
We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-01phy: miphy28lp: Inform the reset framework that our reset line may be sharedLee Jones1-1/+2
On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30namespace: update event counter when umounting a deleted dentryAndrey Ulanov1-0/+1
- m_start() in fs/namespace.c expects that ns->event is incremented each time a mount added or removed from ns->list. - umount_tree() removes items from the list but does not increment event counter, expecting that it's done before the function is called. - There are some codepaths that call umount_tree() without updating "event" counter. e.g. from __detach_mounts(). - When this happens m_start may reuse a cached mount structure that no longer belongs to ns->list (i.e. use after free which usually leads to infinite loop). This change fixes the above problem by incrementing global event counter before invoking umount_tree(). Change-Id: I622c8e84dcb9fb63542372c5dbf0178ee86bb589 Cc: stable@vger.kernel.org Signed-off-by: Andrey Ulanov <andreyu@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-309p: use file_dentry()Miklos Szeredi1-3/+3
v9fs may be used as lower layer of overlayfs and accessing f_path.dentry can lead to a crash. In this case it's a NULL pointer dereference in p9_fid_create(). Fix by replacing direct access of file->f_path.dentry with the file_dentry() accessor, which will always return a native object. Reported-by: Alessio Igor Bogani <alessioigorbogani@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Alessio Igor Bogani <alessioigorbogani@gmail.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-30lockd: unregister notifier blocks if the service fails to come up completelyScott Mayhew1-3/+10
If the lockd service fails to start up then we need to be sure that the notifier blocks are not registered, otherwise a subsequent start of the service could cause the same notifier to be registered twice, leading to soft lockups. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Fixes: 0751ddf77b6a "lockd: Register callbacks on the inetaddr_chain..." Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-06-30ACPI,PCI,IRQ: correct operator precedenceSinan Kaya1-1/+1
The omitted parenthesis prevents the addition operation when acpi_penalize_isa_irq function is called. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-30fuse: serialize dirops by defaultMiklos Szeredi4-2/+37
Negotiate with userspace filesystems whether they support parallel readdir and lookup. Disable parallelism by default for fear of breaking fuse filesystems. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 9902af79c01a ("parallel lookups: actual switch to rwsem") Fixes: d9b3dbdcfd62 ("fuse: switch to ->iterate_shared()")
2016-06-30drm/i915: Fix missing unlock on error in i915_ppgtt_info()Wei Yongjun1-2/+2
Add the missing unlock before return from function i915_ppgtt_info() in the error handling case. Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com (cherry picked from commit b0212486909de4f239ca9f20d032de1b1f2dc52e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-30powerpc: Initialise pci_io_base as early as possibleDarren Stevens4-1/+10
Commit d6a9996e84ac ("powerpc/mm: vmalloc abstraction in preparation for radix") turned kernel memory and IO addresses from #defined constants to variables initialised at runtime. On PA6T (pasemi) systems the setup_arch() machine call initialises the onboard PCI-e root-ports, and uses pci_io_base to do this, which is now before its value has been set, resulting in a panic early in boot before console IO is initialised. Move the pci_io_base initialisation to the same place as vmalloc ranges are set (hash__early_init_mmu()/radix__early_init_mmu()) - this is the earliest possible place we can initialise it. Fixes: d6a9996e84ac ("powerpc/mm: vmalloc abstraction in preparation for radix") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Darren Stevens <darren@stevens-zone.net> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Add #ifdef CONFIG_PCI, massage change log slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-30mfd: da9053: Fix compiler warning message for uninitialised variableSteve Twiss1-1/+1
Fix compiler warning caused by an uninitialised variable inside da9052_group_write() function. Defaulting the value to zero covers the trivial case. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30mfd: max77620: Fix FPS switch statementsRhyland Klein1-0/+2
When configuring FPS during probe, assuming a DT node is present for FPS, the code can run into a problem with the switch statements in max77620_config_fps() and max77620_get_fps_period_reg_value(). Namely, in the case of chip->chip_id == MAX77620, it will set fps_[mix|max]_period but then fall through to the default switch case and return -EINVAL. Returning this from max77620_config_fps() will cause probe to fail. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30phy: phy-stih407-usb: Inform the reset framework that our reset line may be sharedLee Jones1-1/+1
On the STiH410 B2120 development board the ports on the Generic PHY share their reset lines with each other. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30usb: dwc3: st: Inform the reset framework that our reset line may be sharedLee Jones1-1/+2
On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30usb: host: ehci-st: Inform the reset framework that our reset line may be sharedLee Jones1-2/+4
On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30usb: host: ohci-st: Inform the reset framework that our reset line may be sharedLee Jones1-2/+4
On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.