aboutsummaryrefslogtreecommitdiffstats
path: root/net/l2tp/l2tp_eth.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
udplite conflict is resolved by taking what 'net-next' did which removed the backlog receive method assignment, since it is no longer necessary. Two entries were added to the non-priv ethtool operations switch statement, one in 'net' and one in 'net-next, so simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-23net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"WANG Cong1-1/+1
This reverts commit 7c6ae610a1f0, because l2tp_xmit_skb() never returns NET_XMIT_CN, it ignores the return value of l2tp_xmit_core(). Cc: Gao Feng <gfree.wind@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmitGao Feng1-1/+1
The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packe is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So l2tp_eth_dev_xmit should add the NET_XMIT_CN check. Signed-off-by: Gao Feng <gfree.wind@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21net: remove MTU limits on a few ether_setup callersJarod Wilson1-0/+2
These few drivers call ether_setup(), but have no ndo_change_mtu, and thus were overlooked for changes to MTU range checking behavior. They previously had no range checks, so for feature-parity, set their min_mtu to 0 and max_mtu to ETH_MAX_MTU (65535), instead of the 68 and 1500 inherited from the ether_setup() changes. Fine-tuning can come after we get back to full feature-parity here. CC: netdev@vger.kernel.org Reported-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> CC: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> CC: R Parameswaran <parameswaran.r7@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17l2tp: constify net_device_ops structuresJulia Lawall1-1/+1
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 3401 931 44 4376 1118 net/l2tp/l2tp_eth.o and after the change it is: text data bss dec hex filename 3993 347 44 4384 1120 net/l2tp/l2tp_eth.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10l2tp: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas1-2/+2
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: add netdev_lockdep_set_classes() helperEric Dumazet1-5/+1
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet1-0/+4
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25l2tp: auto load type modulesstephen hemminger1-0/+1
It should not be necessary to do explicit module loading when configuring L2TP. Modules should be loaded as needed instead (as is done already with netlink and other tunnel types). This patch adds a new module alias type and code to load the sub module on demand. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03l2tp: Use eth_<foo>_addr instead of memsetJoe Perches1-1/+1
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21l2tp_eth: allow to set a specific mac addressAlexander Couzens1-0/+1
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-1/+2
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02l2tp: fix oops in l2tp_eth_create() error pathTom Parkin1-0/+1
When creating an L2TPv3 Ethernet session, if register_netdev() should fail for any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the 32k-interface limit), the netdev is freed in the error path. However, the l2tp_eth_sess structure's dev pointer is left uncleared, and this results in l2tp_eth_delete() then attempting to unregister the same netdev later in the session teardown. This results in an oops. To avoid this, clear the session dev pointer in the error path. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: net/netfilter/nfnetlink_log.c net/netfilter/xt_LOG.c Rather easy conflict resolution, the 'net' tree had bug fixes to make sure we checked if a socket is a time-wait one or not and elide the logging code if so. Whereas on the 'net-next' side we are calculating the UID and GID from the creds using different interfaces due to the user namespace changes from Eric Biederman. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-05net: qdisc busylock needs lockdep annotationsEric Dumazet1-1/+2
It seems we need to provide ability for stacked devices to use specific lock_class_key for sch->busylock We could instead default l2tpeth tx_queue_len to 0 (no qdisc), but a user might use a qdisc anyway. (So same fixes are probably needed on non LLTX stacked drivers) Noticed while stressing L2TPV3 setup : ====================================================== [ INFO: possible circular locking dependency detected ] 3.6.0-rc3+ #788 Not tainted ------------------------------------------------------- netperf/4660 is trying to acquire lock: (l2tpsock){+.-...}, at: [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] but task is already holding lock: (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&sch->busylock)->rlock){+.-...}: [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffff817499fc>] _raw_spin_lock_irqsave+0x4c/0x60 [<ffffffff81074872>] __wake_up+0x32/0x70 [<ffffffff8136d39e>] tty_wakeup+0x3e/0x80 [<ffffffff81378fb3>] pty_write+0x73/0x80 [<ffffffff8136cb4c>] tty_put_char+0x3c/0x40 [<ffffffff813722b2>] process_echoes+0x142/0x330 [<ffffffff813742ab>] n_tty_receive_buf+0x8fb/0x1230 [<ffffffff813777b2>] flush_to_ldisc+0x142/0x1c0 [<ffffffff81062818>] process_one_work+0x198/0x760 [<ffffffff81063236>] worker_thread+0x186/0x4b0 [<ffffffff810694d3>] kthread+0x93/0xa0 [<ffffffff81753e24>] kernel_thread_helper+0x4/0x10 -> #0 (l2tpsock){+.-...}: [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10 [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50 [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70 [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290 [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00 [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890 [<ffffffff815db019>] ip_output+0x59/0xf0 [<ffffffff815da36d>] ip_local_out+0x2d/0xa0 [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680 [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60 [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30 [<ffffffff815f5300>] tcp_push_one+0x30/0x40 [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040 [<ffffffff81614495>] inet_sendmsg+0x125/0x230 [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0 [<ffffffff81579ece>] sys_sendto+0xfe/0x130 [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&sch->busylock)->rlock); lock(l2tpsock); lock(&(&sch->busylock)->rlock); lock(l2tpsock); *** DEADLOCK *** 5 locks held by netperf/4660: #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e581c>] tcp_sendmsg+0x2c/0x1040 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff815da3e0>] ip_queue_xmit+0x0/0x680 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9ac5>] ip_finish_output+0x135/0x890 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff81595820>] dev_queue_xmit+0x0/0xe00 #4: (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00 stack backtrace: Pid: 4660, comm: netperf Not tainted 3.6.0-rc3+ #788 Call Trace: [<ffffffff8173dbf8>] print_circular_bug+0x1fb/0x20c [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10 [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0 [<ffffffff810a3f44>] ? __lock_acquire+0x2e4/0x1b10 [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50 [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70 [<ffffffff81594e0e>] ? dev_hard_start_xmit+0x5e/0xa70 [<ffffffff81595961>] ? dev_queue_xmit+0x141/0xe00 [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290 [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00 [<ffffffff81595820>] ? dev_hard_start_xmit+0xa70/0xa70 [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890 [<ffffffff815d9ac5>] ? ip_finish_output+0x135/0x890 [<ffffffff815db019>] ip_output+0x59/0xf0 [<ffffffff815da36d>] ip_local_out+0x2d/0xa0 [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680 [<ffffffff815da3e0>] ? ip_local_out+0xa0/0xa0 [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60 [<ffffffff815fa25e>] ? tcp_md5_do_lookup+0x18e/0x1a0 [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30 [<ffffffff815f5300>] tcp_push_one+0x30/0x40 [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040 [<ffffffff81614495>] inet_sendmsg+0x125/0x230 [<ffffffff81614370>] ? inet_create+0x6b0/0x6b0 [<ffffffff8157e6e2>] ? sock_update_classid+0xc2/0x3b0 [<ffffffff8157e750>] ? sock_update_classid+0x130/0x3b0 [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0 [<ffffffff81162579>] ? fget_light+0x3f9/0x4f0 [<ffffffff81579ece>] sys_sendto+0xfe/0x130 [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8174a0b0>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff810757e3>] ? finish_task_switch+0x83/0xf0 [<ffffffff810757a6>] ? finish_task_switch+0x46/0xf0 [<ffffffff81752cb7>] ? sysret_check+0x1b/0x56 [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-04l2tp: fix a typo in l2tp_eth_dev_recv()Eric Dumazet1-1/+1
While investigating l2tp bug, I hit a bug in eth_type_trans(), because not enough bytes were pulled in skb head. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29net: l2tp_eth: provide tx_dropped counterEric Dumazet1-5/+10
Change l2tp_xmit_skb() to return NET_XMIT_DROP in case skb is dropped. Use kfree_skb() instead dev_kfree_skb() for drop_monitor pleasure. Support tx_dropped counter for l2tp_eth Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26net: l2tp_eth: use LLTX to avoid LOCKDEP splatsEric Dumazet1-11/+32
Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code. [ 8683.927442] ====================================================== [ 8683.927555] [ INFO: possible circular locking dependency detected ] [ 8683.927672] 3.4.1-build-0061 #14 Not tainted [ 8683.927782] ------------------------------------------------------- [ 8683.927895] swapper/0/0 is trying to acquire lock: [ 8683.928007] (slock-AF_INET){+.-...}, at: [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [ 8683.928121] but task is already holding lock: [ 8683.928121] (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] which lock already depends on the new lock. [ 8683.928121] [ 8683.928121] [ 8683.928121] the existing dependency chain (in reverse order) is: [ 8683.928121] [ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}: [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<c0304e0c>] ip_send_reply+0xf2/0x1ce [ 8683.928121] [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f [ 8683.928121] [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194 [ 8683.928121] [<c031929b>] tcp_v4_rcv+0x387/0x5a0 [ 8683.928121] [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9 [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c030075b>] ip_local_deliver+0x41/0x45 [ 8683.928121] [<c03005dd>] ip_rcv_finish+0x31a/0x33c [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c0300960>] ip_rcv+0x201/0x23d [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02deae8>] netif_receive_skb+0x4e/0x7d [ 8683.928121] [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too] [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] -> #0 (slock-AF_INET){+.-...}: [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] other info that might help us debug this: [ 8683.928121] [ 8683.928121] Possible unsafe locking scenario: [ 8683.928121] [ 8683.928121] CPU0 CPU1 [ 8683.928121] ---- ---- [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] [ 8683.928121] *** DEADLOCK *** [ 8683.928121] [ 8683.928121] 3 locks held by swapper/0/0: [ 8683.928121] #0: (rcu_read_lock){.+.+..}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #1: (rcu_read_lock_bh){.+....}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #2: (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] stack backtrace: [ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14 [ 8683.928121] Call Trace: [ 8683.928121] [<c034bdd2>] ? printk+0x18/0x1a [ 8683.928121] [<c0158904>] print_circular_bug+0x1ac/0x1b6 [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [<c012b23a>] ? local_bh_enable+0xd/0xd [ 8683.928121] <IRQ> [<c012b4d0>] ? irq_exit+0x41/0x91 [ 8683.928121] [<c0103c6f>] ? do_IRQ+0x79/0x8d [ 8683.928121] [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86 [ 8683.928121] [<c034ef6e>] ? common_interrupt+0x2e/0x34 [ 8683.928121] [<c0108a33>] ? default_idle+0x23/0x38 [ 8683.928121] [<c01091a8>] ? cpu_idle+0x55/0x6f [ 8683.928121] [<c033df25>] ? rest_init+0xa1/0xa7 [ 8683.928121] [<c033de84>] ? __read_lock_failed+0x14/0x14 [ 8683.928121] [<c0498745>] ? start_kernel+0x303/0x30a [ 8683.928121] [<c0498209>] ? repair_env_string+0x51/0x51 [ 8683.928121] [<c04980a8>] ? i386_start_kernel+0xa8/0xaf It appears that like most virtual devices, l2tp should be converted to LLTX mode. This patch takes care of statistics using atomic_long in both RX and TX paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data before a pskb_may_pull() call. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Cc: James Chapman <jchapman@katalix.com> Cc: Hong zhi guo <honkiko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net: l2tp_eth: fix l2tp_eth_dev_xmit raceEric Dumazet1-3/+3
Its illegal to dereference skb after giving it to l2tp_xmit_skb() as it might be already freed/reused. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-07net: l2tp_eth: fix kernel panic on rmmod l2tp_ethEric Dumazet1-0/+2
We must prevent module unloading if some devices are still attached to l2tp_eth driver. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-17net: l2tp: Standardize logging stylesJoe Perches1-10/+5
Use more current logging styles. Add pr_fmt to prefix output appropriately. Convert printks to pr_<level>. Convert PRINTK macros to new l2tp_<level> macros. Neaten some <foo>_refcount debugging macros. Use print_hex_dump_bytes instead of hand-coded loops. Coalesce formats and align arguments. Some KERN_DEBUG output is not now emitted unless dynamic_debugging is enabled. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka1-1/+1
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27net: Audit drivers to identify those needing IFF_TX_SKB_SHARING clearedNeil Horman1-1/+1
After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-21l2tp: fix possible oops on l2tp_eth module unloadJames Chapman1-1/+1
A struct used in the l2tp_eth driver for registering network namespace ops was incorrectly marked as __net_initdata, leading to oops when module unloaded. BUG: unable to handle kernel paging request at ffffffffa00ec098 IP: [<ffffffff8123dbd8>] ops_exit_list+0x7/0x4b PGD 142d067 PUD 1431063 PMD 195da8067 PTE 0 Oops: 0000 [#1] SMP last sysfs file: /sys/module/l2tp_eth/refcnt Call Trace: [<ffffffff8123dc94>] ? unregister_pernet_operations+0x32/0x93 [<ffffffff8123dd20>] ? unregister_pernet_device+0x2b/0x38 [<ffffffff81068b6e>] ? sys_delete_module+0x1b8/0x222 [<ffffffff810c7300>] ? do_munmap+0x254/0x318 [<ffffffff812c64e5>] ? page_fault+0x25/0x30 [<ffffffff812c6952>] ? system_call_fastpath+0x16/0x1b Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-1/+1
Conflicts: net/mac80211/main.c
2010-09-02net: another last_rx roundEric Dumazet1-1/+0
Kill last_rx use in l2tp and two net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26l2tp: test for ethernet header in l2tp_eth_dev_recv()Eric Dumazet1-1/+1
close https://bugzilla.kernel.org/show_bug.cgi?id=16529 Before calling dev_forward_skb(), we should make sure skb head contains at least an ethernet header, even if length included in upper layer said so. Use pskb_may_pull() to make sure this ethernet header is present in skb head. Reported-by: Thomas Heil <heil@terminal-consulting.de> Reported-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23l2tp_eth: fix memory allocationJiri Pirko1-28/+1
Since .size is set properly in "struct pernet_operations l2tp_eth_net_ops", allocating space for "struct l2tp_eth_net" by hand is not correct, even causes memory leakage. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03l2tp: Fix L2TP_DEBUGFS ifdef tests.David S. Miller1-2/+2
We have to check CONFIG_L2TP_DEBUGFS_MODULE as well as CONFIG_L2TP_DEBUGFS. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03l2tp: Add debugfs files for dumping l2tp debug infoJames Chapman1-0/+14
The existing pppol2tp driver exports debug info to /proc/net/pppol2tp. Rather than adding info to that file for the new functionality added in this patch series, we add new files in debugfs, leaving the old /proc file for backwards compatibility (L2TPv2 only). Currently only one file is provided: l2tp/tunnels, which lists internal debug info for all l2tp tunnels and sessions. More files may be added later. The info is for debug and problem analysis only - userspace apps should use netlink to obtain status about l2tp tunnels and sessions. Although debugfs does not support net namespaces, the tunnels and sessions dumped in l2tp/tunnels are only those in the net namespace of the process reading the file. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03l2tp: Add L2TP ethernet pseudowire supportJames Chapman1-0/+347
This driver presents a regular net_device for each L2TP ethernet pseudowire instance. These interfaces are named l2tpethN by default, though userspace can specify an alternative name when the L2TP session is created, if preferred. When the pseudowire is established, regular Linux networking utilities may be used to configure the interface, i.e. give it IP address info or add it to a bridge. Any data passed over the interface is carried over an L2TP tunnel. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.