aboutsummaryrefslogtreecommitdiffstats
path: root/net/mac80211/cfg.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-11-28{nl,cfg,mac}80211: implement dot11MeshHWMPperrMinIntervalThomas Pedersen1-0/+3
As per 802.11mb 13.9.11.3 Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28{nl,cfg,mac}80211: Allow Setting Multicast Rate in MeshChun-Yeow Yeoh1-0/+6
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: dereference RCU protected probe_resp pointer correctlyArik Nemtsov1-1/+1
This fixes a sparse warning: cfg.c:502:13: warning: incorrect type in assignment (different address spaces) cfg.c:502:13: expected struct sk_buff *old cfg.c:502:13: got struct sk_buff [noderef] <asn:4>*probe_resp Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: Add NoAck per tid supportSimon Wunderlich1-0/+11
This patch contains the processing changes in mac80211. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21mac80211: Support ht-cap over-rides.Ben Greear1-1/+1
This implements ht-cap over-rides for mac80211 drivers. HT may be disabled, making an /a/b/g/n station act like an a/b/g station. HT40 may be disabled forcing the station to be HT20 even if the AP and local hardware support HT40. MAX-AMSDU may be disabled. AMPDU-Density may be increased. AMPDU-Factor may be decreased. This has been successfully tested with ath9k using patched wpa_supplicant and iw. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11mac80211: fix warning in ieee80211_probe_clientJohannes Berg1-4/+5
The warning is spurious -- if !sta we always exit without using the unassigned qos variable, and if we do find the sta we assign it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11mac80211: Save probe response data for bssArik Nemtsov1-3/+35
Allow setting a probe response template for an interface operating in AP mode. Low level drivers are notified about changes in the probe response template and are able to retrieve a copy of the current probe response. This data can, for example, be uploaded to hardware as a template. Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11mac80211/cfg80211: report monitor channel in wireless extensionsJohannes Berg1-0/+9
Just add API to get the channel & report it. Trivial really. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11mac80211: init rate-control for TDLS sta when supp-rates are knownArik Nemtsov1-1/+9
Initialize rate control algorithms only when supported rates are known for a TDLS peer sta. Direct Tx between peers is not allowed before the link is enabled. In turn, this only occurs after a change_station() call that sets supported rates. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: Also report the STA's TDLS flag via nl80211Helmut Schaa1-1/+4
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211/mac80211: allow management TX to not wait for ACKJohannes Berg1-3/+8
For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: support client probeJohannes Berg1-0/+68
Support probing clients with null data frames in AP mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: add support for control port protocol in AP modeJohannes Berg1-1/+20
This will allow us to support dynamic WEP with 802.1X properly in mac80211 by not encrypting outgoing and accepting unencrypted incoming frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville1-6/+6
2011-11-08mac80211: fix confusing parenthesesJohannes Berg1-1/+1
There's an extra pair of parentheses here that is simply confusing because it implies a nesting that doesn't actually exist. Just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02mac80211: Fix TDLS support validation in add_station handlerJouni Malinen1-6/+6
We need to verify whether the command is successful before allocating the station entry to avoid extra processing. This also fixes a memory leak on the error path. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-17Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davemJohn W. Linville1-2/+20
2011-10-14mac80211: Provide station flags to cfg80211Helmut Schaa1-1/+19
Only station flags that are already defined in nl80211 are added for now. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11mac80211: fix offchannel TX cookie matchingJohannes Berg1-1/+1
When I introduced in-kernel off-channel TX I introduced a bug -- the work can't be canceled again because the code clear the skb pointer. Fix this by keeping track separately of whether TX status has already been reported. Cc: stable@kernel.org [2.6.38+] Reported-by: Jouni Malinen <j@w1.fi> Tested-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davemJohn W. Linville1-17/+363
Conflicts: Documentation/feature-removal-schedule.txt
2011-09-30mac80211: optimise station flagsJohannes Berg1-20/+24
The flaglock in struct sta_info has long been something that I wanted to get rid of, this finally does the conversion to atomic bitops. The conversion itself is straight-forward in most places, a few things needed to change a bit since we can no longer use multiple bits at the same time. On x86-64, this is a fairly significant code size reduction: text data bss dec hex 427861 23648 1008 452517 6e7a5 before 425383 23648 976 450007 6ddd7 after Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: data path modification for TDLS peersArik Nemtsov1-0/+10
Mark the STA entries of enabled TDLS peers with a new "peer authorized" flag. During link setup, allow special TDLS setup frames through the AP, but otherwise drop all packets destined to the peer. This is required by the TDLS (802.11z) specification in order to prevent reordering of MSDUs between the AP and direct paths. When setup completes and the peer is authorized, send data directly, bypassing the AP. In the Rx path, allow data to be received directly from TDLS peers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30nl80211/mac80211: allow adding TDLS peers as stationsArik Nemtsov1-0/+20
When adding a TDLS peer STA, mark it with a new flag in both nl80211 and mac80211. Before adding a peer, make sure the wiphy supports TDLS and our operating mode is appropriate (managed). In addition, make sure all peers are removed on disassociation. A TDLS peer is first added just before link setup is initiated. In later setup stages we have more info about peer supported rates, capabilities, etc. This info is reported via nl80211_set_station(). Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: handle TDLS high-level commands and framesArik Nemtsov1-0/+310
Register and implement the TDLS cfg80211 callback functions. Internally prepare and send TDLS management frames. We incorporate local STA capabilities and supported rates with extra IEs given by usermode. The resulting packet is either encapsulated in a data frame, or assembled as an action frame. It is transmitted either directly or through the AP, as mandated by the TDLS specification. Declare support for the TDLS external setup wiphy capability. This tells usermode to handle link setup and discovery on its own, and use the kernel driver for sending TDLS mgmt packets. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30cfg80211/mac80211: apply station uAPSD parameters selectivelyJohannes Berg1-2/+4
Currently, when hostapd sets the station as authorized we also overwrite its uAPSD parameter. This obviously leads to buggy behaviour (later, with my patches that actually add uAPSD support). To fix this, only apply those parameters if they were actually set in nl80211, and to achieve that add a bitmap of things to apply. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davemJohn W. Linville1-3/+9
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/wl12xx/main.c
2011-09-27mac80211: save tx params per sdataEliad Peller1-2/+3
save and configure tx param per sdata, rather than per hardware. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27cfg80211/mac80211: add netdev param to set_txq_params()Eliad Peller1-0/+1
tx params are currently configured per hw, although they should be configured per interface. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mac80211: Send the management frame at requested rateRajkumar Manoharan1-0/+3
Whenever the scan request or tx_mgmt is requesting not to use CCK rate for managemet frames through NL80211_ATTR_TX_NO_CCK_RATE attribute, then mac80211 should select appropriate least non-CCK rate. This could help to send P2P probes and P2P action frames at non 11b rates without diabling 11b rates globally. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27nl80211/cfg80211: Add support to disable CCK rate for management frameRajkumar Manoharan1-1/+2
Add a new nl80211 attribute to specify whether to send the management frames in CCK rate or not. As of now the wpa_supplicant is disabling CCK rate at P2P init itself. So this patch helps to send P2P probe request/probe response/action frames being sent at non CCK rate in 2GHz without disabling 11b rates. This attribute is used with NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_FRAME commands to disable CCK rate for management frame transmission. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davemJohn W. Linville1-2/+19
2011-09-14mac80211: add ssid config to bss information in AP-modeArik Nemtsov1-1/+18
Set SSID information from nl80211 beacon parameters. Advertise changes in SSID to low level drivers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: Remove mesh paths when an interface is removedJavier Cardona1-1/+1
When an interface is removed, the mesh paths associated with it should also be removed. This fixes a bug we observed when reloading a device driver module without reloading mac80211s. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davemJohn W. Linville1-0/+19
2011-08-26mac80211: add uapsd_queues and max_sp params fieldsEliad Peller1-0/+3
Add uapsd_queues and max_sp fields to ieee80211_sta. These fields might be needed by low-level drivers in order to configure the AP. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26mac80211: mesh gate fixesThomas Pedersen1-0/+8
Since a v1 of the mesh gate series was accidentally applied, this patch contains the changes in v2. These are: - automatically make mesh gate a root node. - use TU_TO_EXP_TIME macro. - initialize timer instead of checking for NULL timer function. - cleanups. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace make meshif mesh gateJavier Cardona1-0/+4
Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute, which will advertise this mesh node as being a mesh gate. NL80211_HWMP_ROOTMODE must be set or this will do nothing. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace set RANN intervalJavier Cardona1-0/+4
Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davemJohn W. Linville1-39/+0
Conflicts: drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c drivers/staging/ath6kl/os/linux/ar6000_drv.c
2011-08-08mac80211: remove offchannel_tx APIJohannes Berg1-39/+0
For iwlwifi, I decided not to use this API since it just increased the complexity for little gain. Since nobody else intends to use it, let's kill it again. If anybody later needs to have it, we can always revive it then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTERStephen Hemminger1-4/+4
When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18mac80211: reconfigure tx on device reconfigurationEliad Peller1-0/+4
Add tx_conf array to save the current tx queues configuration, and reconfig it on resume (ieee80211_reconfig). On resume, the driver is being reconfigured. Without reconfiguring the tx queues as well, the driver might configure the device to use wrong ac params (e.g. ps-poll instead of uapsd). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix CMAC racesJohannes Berg1-6/+7
Just like TKIP and CCMP, CMAC has the PN race. It might not actually be possible to hit it now since there aren't multiple ACs for management frames, but fix it anyway. Also move scratch buffers onto the stack. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix CCMP racesJohannes Berg1-6/+8
Since we can process multiple packets at the same time for different ACs, but the PN is allocated from a single counter, we need to use an atomic value there. Use atomic64_t to make this cheaper on 64-bit platforms, other platforms will support this through software emulation, see lib/atomic64.c. We also need to use an on-stack scratch buf so that multiple packets won't corrupt each others scratch buffers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06mac80211: support GTK rekey offloadJohannes Berg1-0/+16
This adds the necessary mac80211 APIs to support GTK rekey offload, mirroring the functionality from cfg80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29mac80211: propagate information about STA WME support downArik Nemtsov1-1/+4
Add a memeber to the ieee80211_sta structure to indicate whether the STA supports WME. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01nl80211: add testmode dump supportWey-Yi Guy1-0/+14
This adds dump support to testmode. The testmode dump support in nl80211 requires using two of the six cb->args, the rest can be used by the driver to figure out where the dump position is at or to store other data across invocations. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16nl80211: Move peer link state definition to nl80211Javier Cardona1-3/+3
These definitions need to be exposed now that we can set the peer link states via NL80211_ATTR_STA_PLINK_STATE. They were already being (opaquely) reported by NL80211_STA_INFO_PLINK_STATE. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: sparse RCU annotationsJohannes Berg1-10/+7
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12cfg80211/mac80211: avoid bounce back mac->cfg->mac on sched_scan_stoppedLuciano Coelho1-3/+2
When sched_scan_stopped was called by the driver, mac80211 calls cfg80211, which in turn was calling mac80211 back with a flag "driver_initiated". This flag was used so that mac80211 would do the necessary cleanup but would not call the driver. This was enough to prevent the bounce back between the driver and mac80211, but not between mac80211 and cfg80211. To fix this, we now do the cleanup in mac80211 before calling cfg80211. To help with locking issues, the workqueue was moved from cfg80211 to mac80211. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.