aboutsummaryrefslogtreecommitdiffstats
path: root/net/mac80211 (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2009-11-19mac80211: fix endianess on mesh_path_error_tx() callsRui Paulo1-2/+2
Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19mac80211: add per-station HT capability fileJohannes Berg1-0/+29
This is sometimes useful to debug HT issues as it shows what exactly the stack thinks the peer supports. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19mac80211: avoid spurious deauth frames/messagesJohannes Berg3-11/+54
With WEXT, it happens frequently that the SME requests an authentication but then deauthenticates right away because some new parameters came along. Every time this happens we print a deauth message and send a deauth frame, but both of that is rather confusing. Avoid it by aborting the authentication process silently, and telling cfg80211 about that. The patch looks larger than it really is: __cfg80211_auth_remove() is split out from cfg80211_send_auth_timeout(), there's no new code except __cfg80211_auth_canceled() (a one-liner) and the mac80211 bits (7 new lines of code). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19mac80211: request TX status where neededJohannes Berg7-14/+23
Right now all frames mac80211 hands to the driver have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set to request TX status. This isn't really necessary, only the injected frames need TX status (the latter for hostapd) so move setting this flag. The rate control algorithms also need TX status, but they don't require it. Also, rt2x00 uses that bit for its own purposes and seems to require it being set for all frames, but that can be fixed in rt2x00. This doesn't really change anything for any drivers but in the future drivers using hw-rate control may opt to not report TX status for frames that don't have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> [rt2x00 bits] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19cfg80211: disallow bridging managed/adhoc interfacesJohannes Berg5-4/+48
A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19cfg80211: introduce capability for 4addr modeJohannes Berg9-30/+82
It's very likely that not many devices will support four-address mode in station or AP mode so introduce capability bits for both modes, set them in mac80211 and check them when userspace tries to use the mode. Also, keep track of 4addr in cfg80211 (wireless_dev) and not in mac80211 any more. mac80211 can also be improved for the VLAN case by not looking at the 4addr flag but maintaining the station pointer for it correctly. However, keep track of use_4addr for station mode in mac80211 to avoid all the derefs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19cfg80211: convert bools into flagsJohannes Berg11-67/+70
We've accumulated a number of options for wiphys which make more sense as flags as we keep adding more. Convert the existing ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18b43: Enforce DMA descriptor memory constraintsMichael Buesch2-46/+158
Enforce all device constraints on the descriptor memory region. There are several constraints on the descriptor memory, as documented in the specification. The current code does not enforce them and/or incorrectly enforces them. Those constraints are: - The address limitations on 30/32bit engines, that also apply to the skbs. - The 4k alignment requirement on 30/32bit engines. - The 8k alignment requirement on 64bit engines. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: update cfg80211 scan result code for the updated mesh conf IERui Paulo1-13/+18
Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: use a structure to hold the mesh config information elementRui Paulo5-24/+31
Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: move TX status handlingJohannes Berg4-337/+351
It's enough code to have its own file, I think. Especially since I'm going to add to it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: remove encrypt parameter from ieee80211_tx_skbJohannes Berg12-24/+27
Since the flags moved into skb->cb, there's no longer a need to have the encrypt bool passed into the function, anyone who requires it set to 0 (false) can just set the flag directly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18rfkill: Add constant for RFKILL_TYPE_FM radio devicesMarcel Holtmann2-1/+5
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Janakiram Sistla <janakiram.sistla@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18rfkill: Add missing description for RFKILL_TYPE_GPSMarcel Holtmann1-0/+1
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Janakiram Sistla <janakiram.sistla@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl3501_cs: remove pedantic build warningJohn W. Linville1-1/+1
drivers/net/wireless/wl3501_cs.c: In function ‘wl3501_esbq_exec’: drivers/net/wireless/wl3501_cs.c:387: warning: ‘tmp’ is used uninitialized in this function drivers/net/wireless/wl3501_cs.c:384: note: ‘tmp’ was declared here Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18cfg80211: re-join IBSS when privacy changesJohannes Berg3-11/+44
When going from/to a WEP protected IBSS, we need to leave this one and join a new one to take care of the changed capability. Cc: Hong Zhang <henryzhang62@yahoo.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: Fix panic in aggregation handlingSujith1-0/+2
Not assigning the vif pointer causes an oops. This patch fixes it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18cfg80211: Allow reassociation in associated stateJouni Malinen1-2/+18
cfg80211 rejects all association requests when in associated state. This prevents clean roaming within an ESS since one would first need to disassociate before being able to request reassociation. Accept the reassociation request and let the old association to be dropped when the new one is completed. This fixes nl80211-based roaming with the current snapshot version of wpa_supplicant (that has code for requesting reassociation explicitly withthe previous BSSID attribute). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: make software rate control optionalJohannes Berg6-13/+56
Some devices implement the entire rate control in firmware in some way, like wl1271 or like iwlwifi which does some things in software but not a lot. Therefore generic software rate control is rather useless for them and just adds avoidable overhead to the transmit path. It's fairly simple to let drivers indicate that they do not need rate control, but they need to fulfil a number of conditions that we encode in WARN_ONs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: add NVS in EEPROM supportDavid-John Willis5-7/+23
wl1251 supports also that NVS is stored in a separate EEPROM, add support for that. kvalo: use platform data instead Kconfig and use kernel style Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: remove depcreated qual usageKalle Valo1-4/+0
Fixes warnings: drivers/net/wireless/wl12xx/wl1251_rx.c: In function 'wl1251_rx_status': drivers/net/wireless/wl12xx/wl1251_rx.c:75: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Send null data packet with "TODS" bit setVidhya Govindan1-1/+2
According to IEEE80211 standard all the data packets have to be sent with TODS bit set. This patch fixes the null data packet format which was sent without TODS bit set. This should fix many problems associated with power save. Janne Ylalehto also found this fix in the same time as mine, for a different bug he was working on. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Fix regression in IRQ loop handlingJuuso Oikarinen1-2/+4
In some cases, the IRQ loop handler could acknowledge an interrupt to the chipset, but not service it. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Filter out unwanted eventsJanne Ylalehto1-2/+6
Filter out unwanted events to reduce wakeups. Signed-off-by: Janne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Add IRQ looping supportJanne Ylalehto1-60/+67
Add support for IRQ looping. Helps in the case that we have e.g. multiple packets coming from the network when we wake up from the ELP. Signed-off-by: Janne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Increase the beacon loss timeout value and handle regain eventVidhya Govindan2-2/+10
This patch increases the number of beacons to be missed before generating SYNC TIMEOUT event. It increases the beacon timeout period to 500 microseconds, which gives enough time for the firmware to receive probe response or beacon. Also handled the regain event from firmware once it receives a probe response or beacon. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Set the correct dtim period to the firmwareVidhya Govindan1-2/+2
This patch sets the dtim period obtained from the mac80211 to firmware. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Add acx command to set tbtt and dtim periodVidhya Govindan2-0/+46
The dtim period obtained from the mac80211 is not set to the firmware. This patch implements the acx command to set correct tbtt and dtim value to the firmware. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: mask aid bits 14 and 15 in ps-poll templateKalle Valo1-1/+4
In ps-poll template aid bits 14 and 15 were not masked as required by the standard. Mask them so that aid is sent in correct format. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: allocate space for firmware with vmalloc()Kalle Valo2-7/+25
Earlier firmware was stored to a memory area allocated with kmalloc() but finding a a contiguous area of memory long enough for the firmware is very difficult in certain cases. better to allocate the memory for firmware with vmalloc() instead and use a small buffer for DMA transfers. Thanks to Eero Tamminen for the idea. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Implement delayed entry into ELP modeJuuso Oikarinen4-5/+33
Implement (slightly) delayed entry into ELP. This will cure several problems: - It works around a firmware race condition if ELP is entered too fast after commands (resulting in ELP timeout -traces) - It will reduce the number of sleep-wake cycles between already scheduled events such as interrupts and tx, hence improving performance (less delay in switching between RX and TX) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Configure beacon filtering on if PSM usedJuuso Oikarinen5-7/+27
Enable beacon filtering when PSM is enabled Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Enable beacon filtering with the stackJuuso Oikarinen3-0/+21
Enable beacon filtering with the mac80211 stack. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Add connection monitoring configurationJuuso Oikarinen3-0/+45
Add configuration for connection monitor (number of allowed beacons, and timeout after last received beacon.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18ar9170: Add support for D-Link DWA 160 A2Thomas Klute1-1/+3
At least two revisions of the D-Link DWA 160 exist, called A1 and A2. A1 (USB-ID 07d1:3c10) is already listed in usb.c as D-Link DWA 160A. A2 (USB-ID 07d1:3a09) works if added to ar9170_usb_ids. I didn't do much testing until now, but I was able to connect to APs using WPA or WEP and transmit data. Summary: * Add model revision number to the comment for D-Link DWA 160 A1 (07d1:3c10) * Add support for D-Link DWA 160 A2 (07d1:3a09) Signed-off-by: Thomas Klute <thomas2.klute@uni-dortmund.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18rt2x00: more ids to rt2800usb.cXose Vazquez Perez1-2/+37
taken from windows inf file (09/15/2009, 1.04.07.0000) Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: use fixed broadcast addressJohannes Berg6-19/+27
The netdev broadcast address cannot change from all-ones so there's no need to use it; we can instead hard-code it. Since we already have an instance in tkip.c, which will be shared if it is marked static const, doing this reduces text size at no data/bss cost. The real motivation for this is, of course, the desire to get rid of almost all uses of netdevs in mac80211 so that auditing their use becomes easier. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: remove dev_hold/put callsJohannes Berg1-11/+5
If we move the rcu sections a little, there's no need to touch the device refcount. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: improve rate handlingJohannes Berg2-18/+18
Some code currently assumes that there's a valid rate pointer even in the HT case, but there can't be. To reduce reliance on that, remove the rate pointer from the RX data struct and pass it where it's needed. Also, for now, in radiotap announce HT frames as having a DYN channel type, and remove their rate from cooked monitor radiotap completely (it isn't present in the regular monitor radiotap either.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: trim RX dataJohannes Berg4-54/+61
The RX data contains the netdev, which is duplicated since we have the sdata, and the RX status pointer, which is duplicate since we have the skb. Remove those two fields to have fewer fields that depend on each other and simply load them as necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: cleanup reorder buffer handlingJohannes Berg1-81/+81
The reorder buffer handling is written in a quite peculiar style (especially comments) and also has a quirk where it invokes the entire reorder code in ieee80211_sta_manage_reorder_buf() for just a handful of lines in it with a special argument. Split out ieee80211_release_reorder_frames which can then be invoked from BAR handling and other reordering code, clean up code and comments and remove function arguments that are now unused from ieee80211_sta_manage_reorder_buf(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: push michael MIC report after DA checkJohannes Berg1-24/+23
When we receive a michael MIC failure report from the hardware we currently do not check whether it is actually reported on a frame that is destined to us. It shouldn't be possible to get a michael MIC failure report on other frames, but it also doesn't hurt to verify. Also, since we then don't need the station struct that early, move looking it up a bit later in the RX path. Finally, while at it, a few code cleanups in the area. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: convert aggregation to operate on vifs/stasJohannes Berg14-97/+84
The entire aggregation code currently operates on the hw pointer and station addresses, but that needs to change to make stations purely per-vif; As one step preparing for that make the aggregation code callable with the station, or by the combination of virtual interface and station address. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: let sta_info_get_by_idx get sta by sdataJohannes Berg3-7/+8
Instead of filtering by device, directly look up by sdata. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18ath9k: Fix bug in initializing chain masksSujith1-1/+1
Check for AR5416 ver 1.0 before calibrating 3 chains for multi-chain. This is a WAR for calibration failure. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18ath9k: Remove a few unused functionsSujith4-169/+0
ATH9K_ANT_VARIABLE is the default diversity control used. Consequently ath9k_hw_decrease_chain_power() does nothing. ath9k_hw_setantennaswitch() is unused too. Also, gbeacon_rate is unused. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18ath9k: Remove a few unused variablesSujith2-23/+0
axq_linkbuf, axq_aggr_depth, axq_lastdsWithCTS and axq_gatingds are unused. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18ath9k: Cleanup bss_info_changed callbackSujith1-77/+37
* Remove a code chunk dealing with operating mode changes. As noted, all such policy changes are to be done in add_interface. * Remove pointless check for empty BSSID. Also, remove mode checks - mac80211 does all the needed checks. * Handle enabling/disabling beacon transmission properly. * Handle beacon interval changes for AP mode. The original code depended on config_interface() to update the HW TSF. Since that callback has been removed, handle it properly. * Remove unneeded code dealing with key/privacy. * Set the chainmasks to 1x1 for IBSS when the BSSID is set. This was happening uncondionally before. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18ath9k: get rid of tx_info_privFelix Fietkau6-97/+83
This patch removes the need for separately allocated private tx info data in ath9k and brings the driver one small step closer to using the mac80211 rate control API properly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: add the total ampdu length to tx infoFelix Fietkau1-2/+5
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.