aboutsummaryrefslogtreecommitdiffstats
path: root/net/mac80211 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-03wifi: use struct_group to copy addressesJohannes Berg1-2/+2
We sometimes copy all the addresses from the 802.11 header for the AAD, which may cause complaints from fortify checks. Use struct_group() to avoid the compiler warnings/errors. Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix locking in auth/assoc timeoutJohannes Berg1-6/+5
If we hit an authentication or association timeout, we only release the chanctx for the deflink, and the other link(s) are released later by ieee80211_vif_set_links(), but we're not locking this correctly. Fix the locking here while releasing the channels and links. Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1 Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: release deflink channel in error caseJohannes Berg1-0/+1
In the prep_channel error case we didn't release the deflink channel leaving it to be left around. Fix that. Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix link warning in RX agg timer expiryMukesh Sisodiya1-0/+4
The rx data link pointer isn't set from the RX aggregation timer, resulting in a later warning. Fix that by setting it to the first valid link for now, with a FIXME to worry about statistics later, it's not very important since it's just the timeout case. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com Fixes: 56057da4569b ("wifi: mac80211: rx: track link in RX data") Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-10/+18
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-29net: Use u64_stats_fetch_begin_irq() for stats fetch.Sebastian Andrzej Siewior1-4/+4
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29wifi: mac80211: fix potential deadlock in ieee80211_key_link()Sun Ke1-2/+4
Add the missing unlock before return in the error handling case. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Signed-off-by: Sun Ke <sunke32@huawei.com> Link: https://lore.kernel.org/r/20220827022452.823381-1-sunke32@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26Merge tag 'wireless-next-2022-08-26-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-nextDavid S. Miller14-175/+581
Johannes berg says: ==================== Various updates: * rtw88: operation, locking, warning, and code style fixes * rtw89: small updates * cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work * brcmfmac: a couple of fixes * misc cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26wifi: mac80211: use full 'unsigned int' typeXin Gao1-4/+4
The full 'unsigned int' is better than 'unsigned'. Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Link: https://lore.kernel.org/r/20220816181040.9044-1-gaoxin@cdjrlc.com [fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: read ethtool's sta_stats from sinfoRyder Lee1-5/+5
Driver may update sinfo directly through .sta_statistics, so this patch makes sure that ethool gets the correct statistics. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/f9edff14dd7f5205acf1c21bae8e9d8f9802dd88.1661466499.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: correct SMPS mode in HE 6 GHz capabilityJohannes Berg4-4/+7
If we add 6 GHz capability in MLO, we cannot use the SMPS mode from the deflink. Pass it separately instead since on a second link we don't even have a link data struct yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id to cfg80211_ch_switch_started_notify()Veerendranath Jakkam2-2/+2
Add link_id parameter to cfg80211_ch_switch_started_notify() to allow driver to indicate on which link channel switch started on MLD. Send the data to userspace so it knows as well. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220722131143.3438042-1-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220722131143.3438042-2-quic_vjakkam@quicinc.com [squash two patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: allow bw change during channel switch in meshHari Chandrakanthan1-3/+0
From 'IEEE Std 802.11-2020 section 11.8.8.4.1': The mesh channel switch may be triggered by the need to avoid interference to a detected radar signal, or to reassign mesh STA channels to ensure the MBSS connectivity. A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz MBSS may be changed to a 20/40 MHz MBSS. Since the standard allows the change of bandwidth during the channel switch in mesh, remove the bandwidth check present in ieee80211_set_csa_beacon. Fixes: c6da674aff94 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh") Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com> Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: clean up a needless assignment in ieee80211_sta_activate_link()Lukas Bulwahn1-3/+1
Commit 177577dbd223 ("wifi: mac80211: sta_info: fix link_sta insertion") makes ieee80211_sta_activate_link() return 0 in the 'hash' label case. Hence, setting ret in the !test_sta_flag(...) branch to zero is not needed anymore and can be dropped. Remove a needless assignment. No functional change. No change in object code. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220812103126.25308-1-lukas.bulwahn@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: allow link address A2 in TXQ dequeueJohannes Berg1-2/+2
In ieee80211_tx_dequeue() we currently allow a control port frame to be transmitted on a non-authorized port only if the A2 matches the local interface address, but if that's an MLD and the peer is a legacy peer, we need to allow link address here. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix control port frame addressingJohannes Berg1-1/+2
For an AP interface, when userspace specifieds the link ID to transmit the control port frame on (in particular for the initial 4-way-HS), due to the logic in ieee80211_build_hdr() for a frame transmitted from/to an MLD, we currently build a header with A1 = DA = MLD address of the peer MLD A2 = local link address (!) A3 = SA = local MLD address This clearly makes no sense, and leads to two problems: - if the frame were encrypted (not true for the initial 4-way-HS) the AAD would be calculated incorrectly - if iTXQs are used, the frame is dropped by logic in ieee80211_tx_dequeue() Fix the addressing, which fixes the first bullet, and the second bullet for peer MLDs, I'll fix the second one for non-MLD peers separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: set link ID in TX info for beaconsJohannes Berg1-0/+2
This is simple here, and might save drivers some work if they have common code for TX between beacons and other frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: maintain link_id in link_staJohannes Berg1-0/+1
To helper drivers if they e.g. have a lookup of the link_sta pointer, add the link ID to the link_sta structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211/mac80211: check EHT capability size correctlyJohannes Berg4-20/+62
For AP/non-AP the EHT MCS/NSS subfield size differs, the 4-octet subfield is only used for 20 MHz-only non-AP STA. Pass an argument around everywhere to be able to parse it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: mlme: don't add empty EML capabilitiesMordechay Goodstein1-3/+10
Draft P802.11be_D2.1, section 35.3.17 states that the EML Capabilities Field shouldn't be included in case the device doesn't have support for EMLSR or EMLMR. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: use link ID for MLO in queued framesJohannes Berg2-7/+27
When queuing frames to an interface store the link ID we determined (which possibly came from the driver in the RX status in the first place) in the RX status, and use it in the MLME code to send probe responses, beacons and CSA frames to the right link. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: use the corresponding link for stats updateVasanthakumar Thiagarajan1-6/+29
With link_id reported in rx_status for MLO connection, do the stats update on the appropriate link instead of always deflink. Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Link: https://lore.kernel.org/r/20220817104213.2531-3-quic_vthiagar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: add link information in ieee80211_rx_statusVasanthakumar Thiagarajan1-1/+94
In MLO, when the address translation from link to MLD is done in fw/hw, it is necessary to be able to have some information on the link on which the frame has been received. Extend the rx API to include link_id and a valid flag in ieee80211_rx_status. Also make chanes to mac80211 rx APIs to make use of the reported link_id after sanity checks. Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Link: https://lore.kernel.org/r/20220817104213.2531-2-quic_vthiagar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: properly implement MLO key handlingJohannes Berg7-104/+284
Implement key installation and lookup (on TX and RX) for MLO, so we can use multiple GTKs/IGTKs/BIGTKs. Co-authored-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam1-8/+9
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix use-after-freeJohannes Berg1-1/+1
We've already freed the assoc_data at this point, so need to use another copy of the AP (MLD) address instead. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: use link in TXQ parameter configurationShaul Triebitz1-1/+23
Configure the correct link per the passed parameters. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: set link BSSIDShaul Triebitz1-0/+2
For an AP interface, set the link BSSID when the link is initialized. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: properly set old_links when removing a linkShaul Triebitz1-2/+2
In ieee80211_sta_remove_link, valid_links is set to the new_links before calling drv_change_sta_links, but is used for the old_links. Fixes: cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: accept STA changes without link changesJohannes Berg1-0/+14
If there's no link ID, then check that there are no changes to the link, and if so accept them, unless a new link is created. While at it, reject creating a new link without an address. This fixes authorizing an MLD (peer) that has no link 0. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: potential NULL dereference in ieee80211_tx_control_port()Dan Carpenter1-1/+1
The ieee80211_lookup_ra_sta() function will sometimes set "sta" to NULL so add this NULL check to prevent an Oops. Fixes: 9dd1953846c7 ("wifi: nl80211/mac80211: clarify link ID in control port TX") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuKcTAyO94YOy0Bu@kili Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnectedSiddh Raman Pant1-0/+4
When we are not connected to a channel, sending channel "switch" announcement doesn't make any sense. The BSS list is empty in that case. This causes the for loop in cfg80211_get_bss() to be bypassed, so the function returns NULL (check line 1424 of net/wireless/scan.c), causing the WARN_ON() in ieee80211_ibss_csa_beacon() to get triggered (check line 500 of net/mac80211/ibss.c), which was consequently reported on the syzkaller dashboard. Thus, check if we have an existing connection before generating the CSA beacon in ieee80211_ibss_finish_csa(). Cc: stable@vger.kernel.org Fixes: cd7760e62c2a ("mac80211: add support for CSA in IBSS mode") Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6 Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Signed-off-by: Siddh Raman Pant <code@siddh.me> Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.me Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix possible leak in ieee80211_tx_control_port()Yang Yingliang1-0/+1
Add missing dev_kfree_skb() in an error path in ieee80211_tx_control_port() to avoid a memory leak. Fixes: dd820ed6336a ("wifi: mac80211: return error from control port TX for drops") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220818043349.4168835-1-yangyingliang@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: always free sta in __sta_info_alloc in case of errorLorenzo Bianconi1-1/+1
Free sta pointer in __sta_info_alloc routine if sta_info_alloc_link() fails. Fixes: 246b39e4a1ba5 ("wifi: mac80211: refactor some sta_info link handling") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a3d079208684cddbc25289f7f7e0fed795b0cad4.1661260857.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: Fix UAF in ieee80211_scan_rx()Siddh Raman Pant1-4/+7
ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Siddh Raman Pant <code@siddh.me> Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-05Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds1-4/+2
Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...
2022-07-24mac80211: tracing: Use the new __vstring() helperSteven Rostedt (Google)1-4/+2
Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220705224751.271015450@goodmis.org Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-22wifi: mac80211: fix link data leakJohannes Berg1-10/+10
During the code reshuffling, I accidentally set this to NULL before using it, fix that to fix the link data leak. Fixes: d3e2439b0f33 ("wifi: mac80211: fix link manipulation") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: mlme: fix disassoc with MLOJohannes Berg1-3/+5
In MLO we shouldn't call ieee80211_bss_info_change_notify(), call that only (for backward compatibility) without MLO, and otherwise ieee80211_vif_cfg_change_notify(). Similarly, ieee80211_reset_erp_info() only applies to the current link, and in MLO we assume the driver doesn't really need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: remove erroneous sband/link validationJohannes Berg1-13/+1
In sta_apply_parameters(), we really no longer need to check that the link or sband exists, in fact, that's harmful if link 0 doesn't exist, since then this will fail. Just remove this check, it was added for validation of the sband where used, but it's not used here, it's now only used in sta_link_apply_parameters() which has an own lookup and check. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: mlme: transmit assoc frame with address translationJohannes Berg1-9/+9
To transmit the association frame to the right station and with address translation, use the correct addresses there and set up the AP address in the configuration earlier so it's applied during the transmit of auth/assoc frames. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: verify link addresses are differentJohannes Berg1-4/+34
When adding multiple links, verify that they all have different addresses. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: rx: track link in RX dataJohannes Berg2-2/+18
We'll need the link e.g. for decrypt, and shouldn't be looking it up all the time later, so track it in the RX data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: optionally implement MLO multicast TXJohannes Berg4-11/+87
For drivers using software encryption for multicast TX, such as mac80211_hwsim, mac80211 needs to duplicate the multicast frames on each link, if MLO is enabled. Do this, but don't just make it dependent on the key but provide a separate flag for drivers to opt out of this. This is not very efficient, I expect that drivers will do it in firmware/hardware or at least with DMA engine assistence, so this is mostly for hwsim. To make this work, also implement the SNS11 sequence number space that an AP MLD shall have, and modify the API to the __ieee80211_subif_start_xmit() function to always require the link ID bits to be set. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: expand ieee80211_mgmt_tx() for MLOJohannes Berg5-24/+48
There are a couple of new things that should be possible with MLO: * selecting the link to transmit to a station by link ID, which a previous patch added to the nl80211 API * selecting the link by frequency, similarly * allowing transmittion to an MLD without specifying any channel or link ID, with MLD addresses Enable these use cases. Also fix the address comparison in client mode to use the AP (MLD) address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: report link ID to cfg80211 on mgmt RXJohannes Berg1-1/+3
For frames received on an MLD, report the link ID to userspace. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: add hardware timestamps for RX and TXAvraham Stern2-18/+50
When the low level driver reports hardware timestamps for frame TX status or frame RX, pass the timestamps to cfg80211. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: sta_info: fix link_sta insertionJohannes Berg1-3/+14
When inserting a link STA, make sure it doesn't exist first and add lockdep assertions that we cannot modify the hash table without holding the sta_mtx, so this check is really correct. Also return without hashing if the driver failed, and warn if the hashing fails, which shouldn't happen due to the check described above. Fixes: cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal") Fixes: ba6ddab94fc6 ("wifi: mac80211: maintain link-sta hash table") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: mlme: fix link_sta setupJohannes Berg1-5/+6
We need to copy the address to both the private and public portion of the link_sta (the private one is needed for the hash table). Fix this. Fixes: bbe90107e1d9 ("wifi: mac80211: mlme: refactor link station setup") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.