aboutsummaryrefslogtreecommitdiffstats
path: root/net/mpls (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-12-15switchdev: vlan: Use switchdev_port* in vlan_netdev_opsIdo Schimmel1-0/+7
We need to be able to propagate static FDB entries and certain bridge port attributes (e.g. learning, flooding) down to the port netdev driver when bridge port is a VLAN interface. Achieve that by setting ndo_bridge* and ndo_fdb* in vlan_netdev_ops to the corresponding switchdev_port* functions. This is consistent with team and bond devices. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14e1000e: Fix msi-x interrupt automaskBenjamin Poirier1-6/+5
Since the introduction of 82574 support in e1000e, the driver has worked on the assumption that msi-x interrupt generation is automatically disabled after each irq. As it turns out, this is not the case. Currently, rx interrupts can fire multiple times before and during napi processing. This can be a problem for users because frames that arrive in a certain window (after adapter->clean_rx() but before napi_complete_done() has cleared NAPI_STATE_SCHED) generate an interrupt which does not lead to napi_schedule(). These frames sit in the rx queue until another frame arrives (a tcp retransmit for example). While the EIAC and CTRL_EXT registers are properly configured for irq automask, the modification of IAM in e1000_configure_msix() is what prevents automask from working as intended. This patch removes that erroneous write and fixes interrupt rearming for tx interrupts. It also clears IAME from CTRL_EXT. This is not strictly necessary for operation of the driver but it is to avoid disruption from potential programs that access the registers directly, like `ethregs -c`. Reported-by: Frank Steiner <steiner-reg@bio.ifi.lmu.de> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14e1000e: Do not write lsc to ics in msi-x modeBenjamin Poirier2-12/+19
In msi-x mode, there is no handler for the lsc interrupt so there is no point in writing that to ics now that we always assume Other interrupts are caused by lsc. Reviewed-by: Jasna Hodzic <jhodzic@ucdavis.edu> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14e1000e: Do not read ICR in Other interruptBenjamin Poirier1-15/+7
Removes the ICR read in the other interrupt handler, uses EIAC to autoclear the Other bit from ICR and IMS. This allows us to avoid interference with Rx and Tx interrupts in the Other interrupt handler. The information read from ICR is not needed. IMS is configured such that the only interrupt cause that can trigger the Other interrupt is Link Status Change. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14e1000e: Remove unreachable codeBenjamin Poirier1-6/+0
msi-x interrupts are not shared so there's no need to check if the interrupt was really from this adapter. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14net/macb: add support for resetting PHY using GPIOGregory CLEMENT3-0/+12
With device tree it is no more possible to reset the PHY at board level. Furthermore, doing in the driver allow to power down the PHY when the network interface is no more used. This reset can't be done at the PHY driver level. The PHY must be able to answer the to the mii bus scan to let the kernel creating a PHY device. The patch introduces a new optional property "phy-reset-gpios" inspired from the one use for the FEC. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14igb: Explicitly label self-test result indicesJoe Schultz1-14/+24
Previously, the ethtool self-test gstrings/data arrays were accessed via hardcoded indices, which made the code difficult to follow. This patch replaces the hardcoded values with enum-based labels. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14igb: Improve cable length function for I210, etc.Joe Schultz3-9/+51
Previously, the PHY-specific code to get the cable length for the I210 internal and related PHYs was reporting the cable length of a single pair and reporting it as the min, max, and total cable length. Update it so that all four pairs are checked so the true min, max, and average cable lengths are reported. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14igb: Don't add PHY address to PCDL addressAaron Sierra1-2/+1
There is no reason to add the PHY address into the PCDL register address. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14net: Fix typo in skb_fclone_busyMasanari Iida1-1/+1
This patch fix a typo found within comment of skb_fclone_busy. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14wan: wanxl: add pci_disable_device in case of errorSaurabh Sengar1-0/+1
If there is 'no suitable DMA available' error, device should be disabled before returning Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14ppp: declare ppp devices as enumerated interfacesGuillaume Nault1-2/+1
Let user space be aware of the naming scheme used by ppp interfaces (visible in /sys/class/net/<iface>/name_assign_type). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14ppp: define "ppp" device typeGuillaume Nault1-0/+6
Let PPP devices be identified as such in /sys/class/net/<iface>/uevent. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14qeth: get rid of redundant 0-terminationRasmus Villemoes1-2/+0
0-termination is redundant, since sprintf has done that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14qeth: repair SBAL elements calculationUrsula Braun1-1/+1
When sending skbs, qeth determines the number of qdio SBAL elements required. If qeth sends a fragmented skb, the SBAL element number calculation is wrong, because the fragmented data part is added twice in qeth_l3_tso_elements(). This patch makes sure fragmented data is handled in qeth_elements_for_frags() only, while qeth_l3_tso_elements() starts calculation of qdio SBAL elements just with the linear data part of the skb. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14qeth: initialize net_device with carrier offUrsula Braun2-0/+2
/sys/class/net/<interface>/operstate for an active qeth network interface offen shows "unknown", which translates to "state UNKNOWN in output of "ip link show". It is caused by a missing initialization of the __LINK_STATE_NOCARRIER bit in the net_device state field. This patch adds a netif_carrier_off() invocation when creating the net_device for a qeth device. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reference-ID: Bugzilla 133209 Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14qeth use common function qeth_get_setassparms_cmdThomas Richter3-33/+17
There have been 2 identical versions of function qeth_get_setassparms_cmd() for layer 2 and layer 3. Remove the layer 3 function qeth_l3_get_setassparms_cmd() and call the common one named qeth_get_setassparms_cmd() located in qeth_core_main.c Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14s390-ctcm: Delete unnecessary checks before the function call "channel_remove"Markus Elfring1-5/+2
The channel_remove() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14MAINTAINERS: switch to alternate IBM mail addressUrsula Braun1-2/+2
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14iucv: call skb_linearize() when neededEugene Crosser1-5/+15
When the linear buffer of the received sk_buff is shorter than the header, use skb_linearize(). sk_buffs with short linear buffer happen on the sending side under high traffic, and some kernel configurations, when allocated buffer starts just before page boundary, and IUCV transport has to send it as two separate QDIO buffer elements, with fist element shorter than the header. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14iucv: prevent information leak in iucv_messageEugene Crosser1-1/+1
Initialize storage for the future IUCV header that will be included in the transmitted packet. Some of the header fields are unused with HiperSockets transport, and will contain data left from some other functions. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14ipv6: addrconf: drop ieee802154 specific thingsAlexander Aring1-5/+3
This patch removes ARPHRD_IEEE802154 from addrconf handling. In the earlier days of 802.15.4 6LoWPAN, the interface type was ARPHRD_IEEE802154 which introduced several issues, because 802.15.4 interfaces used the same type. Since commit 965e613d299c ("ieee802154: 6lowpan: fix ARPHRD to ARPHRD_6LOWPAN") we use ARPHRD_6LOWPAN for 6LoWPAN interfaces. This patch will remove ARPHRD_IEEE802154 which is currently deadcode, because ARPHRD_IEEE802154 doesn't reach the minimum 1280 MTU of IPv6. Also we use 6LoWPAN EUI64 specific defines instead using link-layer constanst from 802.15.4 link-layer header. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14ravb: clear RIC1 in init instead of stopKazuya Mizuguchi1-2/+3
AVB-DMAC Receive FIFO Warning interrupt is not enabled, so it is not necessary to disable the interrupt in ravb_close(). On the other hand, this patch disables the interrupt in ravb_dmac_init() to prevent the possibility that the interrupt is issued by the state that a boot loader left. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14net, cgroup: cgroup_sk_updat_lock was missing initializerTejun Heo1-1/+1
bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") added global spinlock cgroup_sk_update_lock but erroneously skipped initializer leading to uninitialized spinlock warning. Fix it by using DEFINE_SPINLOCK(). Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dexuan Cui <decui@microsoft.com> Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14igb: Remove GS40G specific defines/functionsAaron Sierra5-106/+11
The I210 internal PHY can be accessed just as well with the access functions shared by 82580, I350, and I354 devices. A side effect of relying on the common functions, is that I210 cable length support is folded back into the common case which effectively reverts the following commit: commit 59f301046b276f87483b3afa3201a4273def06a9 Author: Carolyn Wyborny <carolyn.wyborny@intel.com> Date: Wed Oct 10 04:42:59 2012 +0000 igb: Update get cable length function for i210/i211 Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14e1000e: Switch e1000e_up to void, drop code checking for error resultAlexander Duyck2-12/+5
The function e1000e_up always returns 0. As such we can convert it to a void and just ignore the results. This allows us to drop some code in a couple spots as we no longer need to worry about non-zero return values. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-14drivers/net: fix eisa_driver probe section mismatchFabian Frederick4-4/+4
Some eisa_driver structures used __init probe functions which generates a warning and could crash if function is called after being deleted. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14hv_netvsc: Fix race condition on Multi-Send Data fieldHaiyang Zhang1-0/+9
In commit 2a04ae8acb14 ("hv_netvsc: remove locking in netvsc_send()"), the locking for MSD (Multi-Send Data) field was removed. This could cause a race condition between RNDIS control messages and data packets processing, because these two types of traffic are not synchronized. This patch fixes this issue by sending control messages out directly without reading MSD field. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-13geneve: UDP checksum configuration via netlinkTom Herbert2-23/+73
Add support to enable and disable UDP checksums via netlink. This is similar to how VXLAN and GUE allow this. This includes support for enabling the UDP zero checksum (for both TX and RX). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-13rco: Clean up casting errorsTom Herbert1-1/+2
Fixe a couple of cast errors found by sparse. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-13fm10k: initialize xps at driver loadJacob Keller2-2/+19
Similar to ixgbe and i40e, initialize XPS on driver load so that we can take advantage of this kernel feature. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: cleanup overly long linesBruce Allan6-23/+33
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: cleanup namespace pollutionBruce Allan4-20/+13
Make functions that should be static. While we're at it, fix the function header comment for fm10k_tlv_attr_nest_stop(), and update the copyright header for fm10k_pf.h, fm10k_tlv.c and fm10k_tlv.h. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: use BIT() macro instead of open-coded bit-shiftingBruce Allan2-2/+2
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: whitespace cleanupsBruce Allan7-9/+11
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: do not inline fm10k_iov_select_vid()Bruce Allan1-1/+1
The function declaration does not need to be 'inline'd here. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: Cleanup exception handling for mailbox interruptAlexander Duyck1-2/+11
This patch addresses two issues. First is the fact that the fm10k_mbx_free_irq was assuming msix_entries was valid and that will not always be the case. As such we need to add a check for if it is NULL. Second is the fact that we weren't freeing the IRQ if the mailbox API returned an error on trying to connect. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: Cleanup MSI-X interrupts in case of failureAlexander Duyck1-1/+3
If the q_vector allocation fails we should free the resources associated with the MSI-X vector table. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: conditionally compile DCB and DebugFS supportJacob Keller4-13/+19
Rather than wrapping fm10k_dcbnl.c and fm10k_debugfs.c support with #ifdef blocks, just conditionally include the .o files in the Makefile. Also, since we're modifying it, update the copyright year on the Makefile. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: bump driver versionJacob Keller1-1/+1
We haven't bumped the driver version in a while despite many fixes being pulled in from the out-of-tree Sourceforge driver. Update the version to match. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: consistently refer to VLANs and VLAN IDsJacob Keller4-15/+15
Instead of using lowercase vlan, vid, or VID, always use VLAN or VLAN ID in comments when referring to VLANs. The original driver code was consistent, but recent patches have not been as consistent with this naming scheme. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: remove namespace pollution of fm10k_iov_msg_data_pfJacob Keller2-9/+0
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: remove unnecessary else block from if statements with returnJacob Keller1-6/+6
Improve code style by removing the unnecessary else block of an if statement which immediately returns. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: do not use CamelCaseJacob Keller2-13/+13
Avoid the use of CamelCase for some variable names that previously slipped through review. Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: use ether_addr_copy to copy MAC addressJacob Keller1-5/+2
Use the ether_addr_copy function instead of copying byte-by-byte in a for-loop by hand. Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12e1000e: initial support for i219-LM (3)Raanan Avargil3-11/+34
i219-LM (3) is a LOM that will be available on systems with the Lewisburg Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support for the device. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12igb: improve handling of disconnected adaptersJarod Wilson2-5/+3
Clean up array_rd32 so that it uses igb_rd32 the same as rd32, per the suggestion of Alexander Duyck, and use io_addr in more places, so that we don't have the need to call E1000_REMOVED (which simply looks for a null hw_addr) nearly as much. Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12igb: fix NULL derefs due to skipped SR-IOV enablingJan Beulich1-0/+7
The combined effect of commits 6423fc3416 ("igb: do not re-init SR-IOV during probe") and ceee3450b3 ("igb: make sure SR-IOV init uses the right number of queues") causes VFs no longer getting set up, leading to NULL pointer dereferences due to the adapter's ->vf_data being NULL while ->vfs_allocated_count is non-zero. The first commit not only neglected the side effect of igb_sriov_reinit() that the second commit tried to account for, but also that of setting IGB_FLAG_HAS_MSIX, without which igb_enable_sriov() is effectively a no-op. Calling igb_{,re}set_interrupt_capability() as done here seems to address this, but I'm not sure whether this is better than sinply reverting the other two commits. Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12e1000e: Increase timeout of polling bit RSPCIPHYRaanan Avargil1-1/+1
Due to timing changes to the ME firmware in Skylake, this timer needs to be increased to 300ms. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12e1000e: fix division by zero on jumbo MTUsDmitry Fleytman1-2/+4
This patch fixes possible division by zero in receive interrupt handler when working without adaptive interrupt moderation. The adaptive interrupt moderation mechanism is typically disabled on jumbo MTUs. Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Leonid Bloch <leonid@daynix.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.