aboutsummaryrefslogtreecommitdiffstats
path: root/net/netrom/nr_route.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-09-15Phonet: resource routing backendRémi Denis-Courmont2-0/+93
When both destination device and object are nul, Phonet routes the packet according to the resource field. In fact, this is the most common pattern when sending Phonet "request" packets. In this case, the packet is delivered to whichever endpoint (socket) has registered the resource. This adds a new table so that Linux processes can register their Phonet sockets to Phonet resources, if they have adequate privileges. (Namespace support is not implemented at the moment.) Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15Phonet: remove dangling pipe if an endpoint is closed earlyRémi Denis-Courmont2-1/+31
Closing a pipe endpoint is not normally allowed by the Phonet pipe, other than as a side after-effect of removing the pipe between two endpoints. But there is no way to prevent Linux userspace processes from being killed or suffering from bugs, so this can still happen. We might as well forcefully close Phonet pipe endpoints then. The cellular modem supports only a few existing pipes at a time. So we really should not leak them. This change instructs the modem to destroy the pipe if either of the pipe's endpoint (Linux socket) is closed too early. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15misdn: kill big kernel lockArnd Bergmann1-7/+0
The use of the big kernel lock in misdn is completely bogus, so let's just remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15i4l: kill big kernel lockArnd Bergmann1-5/+6
The isdn4linux driver uses the big kernel lock only to serialize access to a few fields in its own modem_info structure. The easiest replacement is a driver-wide mutex. More fine-grained locking would be more appropriate here, but likely harder to implement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15irda/irnet: use noop_llseekArnd Bergmann1-1/+2
There may be applications trying to seek on the irnet character device, so we should use noop_llseek to avoid returning an error when the default llseek changes to no_llseek. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15sit: get rid of ipip6_lockEric Dumazet1-33/+31
As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15gre: get rid of ipgre_lockEric Dumazet1-29/+32
As RTNL is held while doing tunnels inserts and deletes, we can remove ipgre_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15ipip: get rid of ipip_lockEric Dumazet1-33/+34
As RTNL is held while doing tunnels inserts and deletes, we can remove ipip_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15net: add rtnl_dereference()Eric Dumazet1-0/+9
We sometime want to dereference an rcu protected pointer while holding RTNL. Use a macro to hide all lockdep details. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15ethtool: Remove unimplemented flow specification typesBen Hutchings3-37/+11
struct ethtool_rawip4_spec and struct ethtool_ether_spec are neither commented nor used by any driver, so remove them. Adjust padding in the user-visible unions that included these structures. Fix references to struct ethtool_rawip4_spec in ethtool_get_rx_ntuple(), which should use struct ethtool_usrip4_spec. struct ethtool_usrip4_spec cannot hold IPv6 host addresses and there is no separate structure that can, so remove ETH_RX_NFC_IP6 and the reference to it in niu. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15ethtool: Complete kernel-doc comments for RX flow filter and hash controlBen Hutchings1-16/+113
There are now several interfaces within the ethtool API for getting and setting RX flow filtering and hashing behaviour, most of which are poorly documented. This adds kernel-doc comments for all these interfaces, based on the existing incomplete comments and on the initial implementations. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: phy tmp variable roundupMatt Carlson1-30/+15
The tg3's phy routines define temporary variables in many locations within the same routine. This patch unifies all temporary variables into one location. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Dynamically allocate VPD data memoryMatt Carlson1-4/+11
This patch eases stack pressure by dynamically allocating the memory used to temporarily store VPD data. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Use skb_is_gso_v6()Matt Carlson1-3/+3
This patch converts the driver to prefer the skb_is_gso_v6() helper over the explicit inlined version. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Move producer ring struct to tg3_napiMatt Carlson2-25/+18
Now that each NAPI instance has its own producer ring, it no longer makes sense to keep the producer ring structure external. This patch migrates the producer ring struct to tg3_napi and pivots the code to the new implementation. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Clarify semantics of TG3_IRQ_MAX_VECSMatt Carlson2-4/+5
TG3_IRQ_MAX_VECS should be seen as the maximum number of vectors that any device could be expected to use. tp->irq_max represents the maximum number of vectors the current device can use. This patch clarifies the semantics of the code to match the above description. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Unlock 5717 B0+ supportMatt Carlson1-5/+1
This patch adjusts the driver to use the tg3_start_xmit_dma_bug() transmit routine for all revisions of 5717 asic rev devices and then allows the driver to attach to B0 and later devices. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Don't send APE events for NCSI firmwareMatt Carlson2-3/+28
NCSI firmware does not accept APE events. It relies on a "driver state" location in shared memory to tell it what the driver's current state is. This patch pivots the code to use the new driver state scheme. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Disable TSSMatt Carlson1-8/+1
It was recently discovered that enabling TSS can lockup the device. This patch disables the feature until a suitable workaround can be found. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15tg3: Fix read DMA FIFO overruns on recent devicesMatt Carlson2-1/+15
Earlier versions of tg3 devices had a problem where the read DMA FIFO could be overrun in certain edge conditions. The fix was to limit the number of rx BDs the hardware would fetch at a time. For later devices (5761, 5784 and later ASIC revs), there is a hardware fix that must be enabled to fix the same problem. This patch adds that hardware fix. There is a gap in the ASIC revision lineage where neither fix is applied. This is intentional as these ASIC revisions are not afflicted by the bug. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15dccp ccid-3: Simplify and consolidate tx_parse_optionsGerrit Renker2-46/+14
This simplifies and consolidates the TX option-parsing code: 1. The Loss Intervals option is not currently used, so dead code related to this option is removed. I am aware of no plans to support the option, but if someone wants to implement it (e.g. for inter-op tests), it is better to start afresh than having to also update currently unused code. 2. The Loss Event and Receive Rate options have a lot of code in common (both are 32 bit, both have same length etc.), so this is consolidated. 3. The test against GSR is not necessary, because - on first loading CCID3, ccid_new() zeroes out all fields in the socket; - ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to pinv = opt_recv->ccid3or_loss_event_rate; if (pinv == ~0U || pinv == 0) hctx->p = 0; - as a result, the sequence number field is removed from opt_recv. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15dccp ccid-3: remove buggy RTT-sampling history lookupGerrit Renker3-57/+38
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since 1. it suffered from complex passing of return values (the return value both indicated successful lookup while the value doubled as RTT sample); 2. when for some odd reason the sample value equalled 0, this triggered a bug warning about "bogus Ack", due to the ambiguity of the return value; 3. on a passive host which has not sent anything the TX history is empty and thus will lead to unwanted "bogus Ack" warnings such as ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148 ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606. The fix is to replace the implicit encoding by performing the steps manually. Furthermore, the "bogus Ack" warning has been removed, since it can actually be triggered due to several reasons (network reordering, old packet, (3) above), hence it is not very useful. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15dccp ccid-3: A lower bound for the inter-packet scheduling algorithmGerrit Renker2-16/+21
This fixes a subtle bug in the calculation of the inter-packet gap and shows that t_delta, as it is currently used, is not needed. The algorithm from RFC 5348, 8.3 below continually computes a send time t_nom, which is initialised with the current time t_now; t_gran = 1E6 / HZ specifies the scheduling granularity, s the packet size, and X the sending rate: t_distance = t_nom - t_now; // in microseconds t_delta = min(t_ipi, t_gran) / 2; // `delta' parameter in microseconds if (t_distance >= t_delta) { reschedule after (t_distance / 1000) milliseconds; } else { t_ipi = s / X; // inter-packet interval in usec t_nom += t_ipi; // compute the next send time send packet now; } Problem: -------- Rescheduling requires a conversion into milliseconds (sk_reset_timer()). The highest jiffy resolution with HZ=1000 is 1 millisecond, so using a higher granularity does not make much sense here. As a consequence, values of t_distance < 1000 are truncated to 0. This issue has so far been resolved by using instead if (t_distance >= t_delta + 1000) reschedule after (t_distance / 1000) milliseconds; This is unnecessarily large, a lower bound is t_delta' = max(t_delta, 1000). And it implies a further simplification: a) when HZ >= 500, then t_delta <= t_gran/2 = 10^6/(2*HZ) <= 1000, so that t_delta' = MAX(1000, t_delta) = 1000 (constant value); b) when HZ < 500, then t_delta = 1/2*MIN(rtt, t_ipi, t_gran) <= t_gran/2, so that 1000 <= t_delta' <= t_gran/2. The maximum error of using a constant t_delta in (b) is less than half a jiffy. Fix: ---- The patch replaces t_delta with a constant, whose value depends on CONFIG_HZ, changing the above algorithm to: if (t_distance >= t_delta') reschedule after (t_distance / 1000) milliseconds; where t_delta' = 10^6/(2*HZ) if HZ < 500, and t_delta' = 1000 otherwise. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-14X.25 remove bkl in connectandrew hendry1-2/+0
Connect already has socket locking. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14X.25 remove bkl in acceptAndrew Hendry1-3/+5
Accept already has socket locking. [ Extend socket locking over TCP_LISTEN state test. -DaveM ] Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14X.25 remove bkl in bindandrew hendry1-2/+2
Accept updates socket values in 3 lines so wrapped with lock_sock. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14X.25 remove bkl in listenandrew hendry1-2/+2
Listen updates socket values and needs lock_sock. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14net/irda: Use static const char * const where possibleJoe Perches2-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14drivers/net/wireless: Use static const char * const where possibleJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14drivers/net/pcmcia: Use static const char * const where possibleJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14drivers/net: Use static const char * const where possibleJoe Perches2-2/+6
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14drivers/isdn: Use static const char * const where possibleJoe Perches2-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14e1000e: Simplify MSI interrupt testingJean Delvare1-25/+4
The code is quite convoluted, simplify it. This also avoids calling e1000_request_irq() without testing the value it returned, which was bad. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13uwb: use '%pM' format to print MAC addressAndy Shevchenko2-9/+3
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13bnx2x: Spread rx buffers between allocated queuesDmitry Kravkov4-5/+17
Default number of rx buffers will be divided equally between allocated queues. This will decrease amount of pre-allocated buffers on systems with multiple CPUs. User can override this behavior with ethtool -G. Minimum amount of rx buffers per queue set to 128. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13cx82310_eth: allow empty URBsOndrej Zary1-9/+3
Empty received URBs are currently counted as errors but the device sends them sometimes as part of regular traffic - so remove this check. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13cx82310_eth: check usb_string() return value for errorOndrej Zary1-5/+3
Fix that usb_string() return value is not checked for error (negative value). Also change the ignore message a bit and lower its level to info. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13drivers/net/skfp: Remove pr_<level> uses of KERN_<level>Joe Perches1-42/+42
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13net/cxgb3: remove undefined operationsAndreas Schwab1-1/+1
Modifying an object twice without an intervening sequence point is undefined. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13net/de4x5: remove undefined operationsAndreas Schwab1-9/+9
Modifying an object twice without an intervening sequence point is undefined. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13sundance: Add power management hooksDenis Kirjanov1-0/+48
This patch to adds support for PM hooks into sundance driver Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13flow: better memory managementEric Dumazet1-36/+42
Allocate hash tables for every online cpus, not every possible ones. NUMA aware allocations. Dont use a full page on arches where PAGE_SIZE > 1024*sizeof(void *) misc: __percpu , __read_mostly, __cpuinit annotations flow_compare_t is just an "unsigned long" Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13sfc: Fix order of channel_name array dimensionsBen Hutchings1-1/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-12bna: Check for NULL before deref in bnad_cb_tx_cleanupDavid S. Miller1-1/+2
Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10pkt_sched: remov unnecessary bh_disablestephen hemminger1-2/+2
Now that est_tree_lock is acquired with BH protection, the other call is unnecessary. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10fib: cleanupsEric Dumazet1-32/+23
Use rcu_dereference_rtnl() helper Change hard coded constants in fib_flag_trans() 7 -> RTN_UNREACHABLE 8 -> RTN_PROHIBIT Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Allow changing the DMA ring sizes dynamically via ethtoolBen Hutchings5-52/+224
This requires some reorganisation of channel setup and teardown to ensure that we can always roll-back a failed change. Based on work by Steve Hodgson <shodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Make the dmaq size a run-time setting (rather than compile-time)Steve Hodgson7-76/+109
- Allow the ring size to be specified in non power-of-two sizes (for instance to limit the amount of receive buffers). - Automatically size the event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Allocate each channel separately, along with its RX and TX queuesBen Hutchings3-76/+61
This will allow for reallocation of channel structures and rings. Change module parameter separate_tx_channels to be read-only, since we now require its value to be constant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Refactor channel and queue lookup and iterationBen Hutchings7-75/+125
In preparation for changes to the way channels and queue structures are allocated, revise the macros and functions used to look up and iterator over them. - Replace efx_for_each_tx_queue() with iteration over channels then TX queues - Replace efx_for_each_rx_queue() with iteration over channels then RX queues (with one exception, shortly to be removed) - Introduce efx_get_{channel,rx_queue,tx_queue}() functions to look up channels and queues by index - Introduce efx_channel_get_{rx,tx}_queue() functions to look up a channel's queues Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.