aboutsummaryrefslogtreecommitdiffstats
path: root/net/nfc/nci/core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga1-0/+14
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga1-0/+4
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-13NFC: nci: remove current SLEEP mode managementVincent Cuissard1-1/+1
NCI deactivate management was modified to support all NCI deactivation type. Problem is that all the API are not ready yet for it. Problem is that with current code, when neard asks to deactivate the tag it sends a deactivate SLEEP but nobody will then send a IDLE deactivate. This IDLE deactivate is mandatory since NFC controller can only be unlocked by DH. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-10NFC: nci: Export nci_req_completeSamuel Ortiz1-0/+1
Drivers implementing proprietary ops may need it now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Move close ops call in nci_close_deviceChristophe Ricard1-4/+6
When closing the device some data (proprietary commands) might be sent. The core state machine needs to be set for correct command execution. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci_prop_cmd allowing to send proprietary nci cmdChristophe Ricard1-0/+26
Handle allowing to send proprietary nci commands anywhere in the nci state machine. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci init ops for early device initializationChristophe Ricard1-2/+7
Some device may need to execute some proprietary commands in order to "wake-up"; Before the nci state initialization. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add NCI_RESET return code check before setupChristophe Ricard1-2/+3
setup was executed in any case, even if NCI_RESET failed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Handle proprietary response and notificationsSamuel Ortiz1-0/+52
Allow for drivers to explicitly define handlers for each proprietary notifications and responses they expect to support. Reviewed-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26NFC: nci: Add firmware download supportClément Perrochaud1-0/+11
A simple forward for firmware download (i.e. sending a new firmware to the NFC adapter) from the NFC subsystem to the drivers. This feature is required to update the firmware of NXP-NCI NFC controllers but can be used by any NCI driver. This feature has been present in the HCI subsystem since 9a695d. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Move NFCEE discovery logicChristophe Ricard1-1/+7
NFCEE_DISCOVER_CMD is a specified NCI command used to discover NFCEE IDs. Move nci_nfcee_discover() call to nci_discover_se() in order to guarantee: - NFCEE_DISCOVER_CMD run when the NCI state machine is initialized - NFCEE_DISCOVER_CMD is not run in case there is not discover_se hook defined by a NFC device driver. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Support all destinations type when creating a connectionChristophe Ricard1-15/+33
The current implementation limits nci_core_conn_create_req() to only manage NCI_DESTINATION_NFCEE. Add new parameters to nci_core_conn_create() to support all destination types described in the NCI specification. Because there are some parameters with variable size dynamic buffer allocation is needed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Add reference to the RF logical connectionChristophe Ricard1-1/+1
The NCI_STATIC_RF_CONN_ID logical connection is the most used connection. Keeping it directly accessible in the nci_dev structure will simplify and optimize the access. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add HCI over NCI protocol supportChristophe Ricard1-7/+13
According to the NCI specification, one can use HCI over NCI to talk with specific NFCEE. The HCI network is viewed as one logical NFCEE. This is needed to support secure element running HCI only firmwares embedded on an NCI capable chipset, like e.g. the st21nfcb. There is some duplication between this piece of code and the HCI core code, but the latter would need to be abstracted even more to be able to use NCI as a logical transport for HCP packets. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Support logical connections managementChristophe Ricard1-0/+38
In order to communicate with an NFCEE, we need to open a logical connection to it, by sending the NCI_OP_CORE_CONN_CREATE_CMD command to the NFCC. It's left up to the drivers to decide when to close an already opened logical connection. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add NFCEE enabling and disabling supportChristophe Ricard1-0/+21
NFCEEs can be enabled or disabled by sending the NCI_OP_NFCEE_MODE_SET_CMD command to the NFCC. This patch provides an API for drivers to enable and disable e.g. their NCI discoveredd secure elements. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add NFCEE discover supportChristophe Ricard1-0/+17
NFCEEs (NFC Execution Environment) have to be explicitly discovered by sending the NCI_OP_NFCEE_DISCOVER_CMD command. The NFCC will respond to this command by telling us how many NFCEEs are connected to it. Then the NFCC sends a notification command for each and every NFCEE connected. Here we implement support for sending NCI_OP_NFCEE_DISCOVER_CMD command, receiving the response and the potential notifications. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add dynamic logical connections supportChristophe Ricard1-7/+40
The current NCI core only support the RF static connection. For other NFC features such as Secure Element communication, we may need to create logical connections to the NFCEE (Execution Environment. In order to track each logical connection ID dynamically, we add a linked list of connection info pointers to the nci_dev structure. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add support for different NCI_DEACTIVATE_TYPEChristophe Ricard1-4/+6
nci_rf_deactivate_req only support NCI_DEACTIVATE_TYPE_IDLE_MODE. In some situation, it might be necessary to be able to support other NCI_DEACTIVATE_TYPE such as NCI_DEACTIVATE_TYPE_SLEEP_MODE in order for example to reactivate the selected target. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add se_io NCI operandChristophe Ricard1-0/+14
se_io allows to send apdu over the CLF to the embedded Secure Element. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_disable_se to run proprietary commands to disable a secure elementChristophe Ricard1-0/+5
Some NFC controller using NCI protocols may need a proprietary commands flow to disable a secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_enable_se to run proprietary commands to enable a secure elementChristophe Ricard1-0/+5
Some NFC controller using NCI protocols may need a proprietary commands flow to enable a secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_discover_se to run proprietary commands to discover all available secure elementChristophe Ricard1-0/+5
Some NFC controller using NCI protocols may need a proprietary commands flow to discover all available secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-11-28NFC: NCI: Signal deactivation in Target modeJulien Lefrique1-1/+16
Before signaling the deactivation, send a deactivation request if in RFST_DISCOVERY state because neard assumes polling is stopped and will try to restart it. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-11-28NFC: NCI: Implement Target mode send functionJulien Lefrique1-0/+13
As specified in NCI 1.0 and NCI 1.1, when using the NFC-DEP RF Interface, the DH and the NFCC shall only use the Static RF Connection for data communication with a Remote NFC Endpoint. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-11-28NFC: NCI: Configure ATR_RES general bytesJulien Lefrique1-1/+9
The Target responds to the ATR_REQ with the ATR_RES. Configure the General Bytes in ATR_RES with the first three octets equal to the NFC Forum LLCP magic number, followed by some LLC Parameters TLVs described in section 4.5 of [LLCP]. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-11-28NFC: NCI: Enable NFC-DEP in Listen A and Listen FJulien Lefrique1-0/+29
Send LA_SEL_INFO and LF_PROTOCOL_TYPE with NFC-DEP protocol enabled. Configure 212 Kbit/s and 412 Kbit/s bit rates for Listen F. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-11-28NFC: NCI: Add passive Listen modes in discover requestJulien Lefrique1-10/+32
The Target mode protocols are given to the nci_start_poll() function but were previously ignored. To enable P2P Target, when NFC-DEP is requested as a Target mode protocol, add NFC-A and NFC-F Passive Listen modes in RF_DISCOVER_CMD command. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-01NFC: NCI: Fix nci_register_device init sequenceVincent Cuissard1-8/+5
All contexts have to be initiliazed before calling nfc_register_device otherwise it is possible to call nci_dev_up before ending the nci_register_device function. In such case kernel will crash on non initialized variables. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-01NFC: NCI: Add support of ISO15693Vincent Cuissard1-0/+8
Update nci.h to respect latest NCI specification proposal (stop using proprietary opcodes). Handle ISO15693 parameters in NCI_RF_ACTIVATED_NTF handler. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: NCI: Send all NCI frames to raw socketsHiren Tandel1-0/+9
So that anyone listening on SOCKPROTO_RAW for raw frames will get all NCI frames, in both directions. This actually implements userspace NFC NCI sniffing. It's now up to userspace to decode those frames. Signed-off-by: Hiren Tandel <hirent@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-03-17Merge tag 'nfc-next-3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-nextJohn W. Linville1-1/+2
Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.15: First pull request This is the NFC pull request for 3.15. With this one we have: - Support for ISO 15693 a.k.a. NFC vicinity a.k.a. Type 5 tags. ISO 15693 are long range (1 - 2 meters) vicinity tags/cards. The kernel now supports those through the NFC netlink and digital APIs. - Support for TI's trf7970a chipset. This chipset relies on the NFC digital layer and the driver currently supports type 2, 4A and 5 tags. - Support for NXP's pn544 secure firmare download. The pn544 C3 chipsets relies on a different firmware download protocal than the C2 one. We now support both and use the right one depending on the version we detect at runtime. - Support for 4A tags from the NFC digital layer. - A bunch of cleanups and minor fixes from Axel Lin and Thierry Escande." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-23NFC: NCI: Use reinit_completion() at appropriate placesAxel Lin1-1/+2
Calling init_completion() once is enough. Then use reinit_completion() instead in __nci_request() and nci_spi_send(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-02-23NFC: NCI: Fix NULL pointer dereferenceAmitkumar Karwar1-1/+1
The check should be for setup function pointer. This patch fixes NULL pointer dereference issue for NCI based NFC driver which doesn't define setup handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Add set_config APIAmitkumar Karwar1-0/+16
This API can be used by drivers to send their custom configuration using SET_CONFIG NCI command to the device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Add setup handlerAmitkumar Karwar1-0/+3
Some drivers require special configuration while initializing. This patch adds setup handler for this custom configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Don't reverse local general bytesAmitkumar Karwar1-6/+0
Local general bytes returned by nfc_get_local_general_bytes() are already in correct order. We don't need to reverse them. Remove local_gb[] local array as it's not needed any more. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-05NFC: NCI: Cancel cmd_timer in nci_close_device()Amitkumar Karwar1-0/+2
nci_close_device() sends nci reset command to the device. If there is no response for this command, nci request timeout occurs first and then cmd timeout happens. Because command timer has started after sending the command. We are immediately flushing command workqueue after nci timeout. Later we will try to schedule cmd_work in command timer which leads to a crash. Cancel cmd_timer before flushing the workqueue to fix the problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-12-11nfc: Fix FSF address in file headersJeff Kirsher1-2/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Lauro Ramos Venancio <lauro.venancio@openbossa.org> CC: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-14NFC: Extend and fix the internal secure element APISamuel Ortiz1-0/+18
Secure elements need to be discovered after enabling the NFC controller. This is typically done by the NCI core and the HCI drivers (HCI does not specify how to discover SEs, it is left to the specific drivers). Also, the SE enable/disable API explicitely takes a SE index as its argument. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz1-2/+0
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: NCI: Fix skb->dev usageFrederic Danis1-11/+6
skb->dev is used for carrying a net_device pointer and not an nci_dev pointer. Remove usage of skb-dev to carry nci_dev and replace it by parameter in nci_recv_frame(), nci_send_frame() and driver send() functions. NfcWilink driver is also updated to use those functions. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Initial Secure Element APISamuel Ortiz1-0/+2
Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Fix some code style and whitespace issuesSzymon Janc1-1/+0
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Fix style issues with logical operationsSzymon Janc1-8/+8
Logical continuations should be on the previous line. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Remove not needed local variable in nci_set_local_general_bytesSzymon Janc1-6/+4
No need for local rc variable as result of nci_request can be returned directly. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytesSzymon Janc1-1/+1
local_gb is of size NFC_MAX_GT_LEN and len is used as index for it. Check len against this instead of NCI_MAX_PARAM_LEN before accessing local_gb. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Implement NCI dep_link_up and dep_link_downIlan Elias1-1/+35
During NFC-DEP target activation, store the remote general bytes to be used later in dep_link_up. When dep_link_up is called, activate the NFC-DEP target, and forward the remote general bytes. When dep_link_down is called, deactivate the target. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Set local general bytes in nci_start_pollIlan Elias1-0/+55
If initiator protocol is NFC-DEP, set the local general bytes in nci_start_poll. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-17Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville1-0/+3
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.