aboutsummaryrefslogtreecommitdiffstats
path: root/net/smc/smc_core.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-25net/smc: improve delete link processingKarsten Graul1-1/+3
Send an orderly DELETE LINK request before termination of a link group, add support for client triggered DELETE LINK processing. And send a disorderly DELETE LINK before module is unloaded. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net/smc: use correct vlan gid of RoCE deviceUrsula Braun1-2/+3
SMC code uses the base gid for VLAN traffic. The gids exchanged in the CLC handshake and the gid index used for the QP have to switch from the base gid to the appropriate vlan gid. When searching for a matching IB device port for a certain vlan device, it does not make sense to return an IB device port, which is not enabled for the used vlan_id. Add another check whether a vlan gid exists for a certain IB device port. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net/smc: use DECLARE_BITMAP for rtokens_used_maskUrsula Braun1-2/+1
Link group field tokens_used_mask is a bitmap. Use macro DECLARE_BITMAP for its definition. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net/smc: add function to get link group from linkStefan Raspl1-0/+5
Replace a frequently used construct with a more readable variant, reducing the code. Also might come handy when we start to support more than a single per link group. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net/smc: add SMC-D support in af_smcHans Wippel1-0/+1
This patch ties together the previous SMC-D patches. It adds support for SMC-D to the listen and connect functions and, thus, enables SMC-D support in the SMC code. If a connection supports both SMC-R and SMC-D, SMC-D is preferred. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Suggested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net/smc: add base infrastructure for SMC-D and ISMHans Wippel1-19/+52
SMC supports two variants: SMC-R and SMC-D. For data transport, SMC-R uses RDMA devices, SMC-D uses so-called Internal Shared Memory (ISM) devices. An ISM device only allows shared memory communication between SMC instances on the same machine. For example, this allows virtual machines on the same host to communicate via SMC without RDMA devices. This patch adds the base infrastructure for SMC-D and ISM devices to the existing SMC code. It contains the following: * ISM driver interface: This interface allows an ISM driver to register ISM devices in SMC. In the process, the driver provides a set of device ops for each device. SMC uses these ops to execute SMC specific operations on or transfer data over the device. * Core SMC-D link group, connection, and buffer support: Link groups, SMC connections and SMC buffers (in smc_core) are extended to support SMC-D. * SMC type checks: Some type checks are added to prevent using SMC-R specific code for SMC-D and vice versa. To actually use SMC-D, additional changes to pnetid, CLC, CDC, etc. are required. These are added in follow-up patches. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Suggested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net/smc: move smc_core specific code from smc.h to smc_coreHans Wippel1-0/+12
SMC connection and buffer handling belong to smc_core. So, this patch moves this code from smc.h to smc_core. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net/smc: move link group list to smc_coreHans Wippel1-2/+3
This patch moves the global link group list to smc_core where the link group functions are. To make this work, it moves code in af_smc and smc_ib that operates on the link group list to smc_core as well. While at it, the link group counter is integrated into the list structure and initialized to zero. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net/smc: add common buffer size in send and receive buffer descriptorsHans Wippel1-0/+1
In addition to the buffer references, SMC currently stores the sizes of the receive and send buffers in each connection as separate variables. This patch introduces a buffer length variable in the common buffer descriptor and uses this length instead. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net/smc: check for pending terminationKarsten Graul1-1/+2
Avoid to run the processing in smc_lgr_terminate() more than once, remember when the link group termination is triggered. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net/smc: use a workqueue to defer llc sendKarsten Graul1-0/+1
SMC handles deferred work in tasklets. As tasklets cannot sleep this can result in rare EBUSY conditions, so defer this work in a work queue. The high level api functions do not defer work because they can sleep until the llc send is actually completed. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net/smc: register new rmbs with the peerKarsten Graul1-0/+2
Register new rmb buffers with the remote peer by exchanging a confirm_rkey llc message. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04smc: allocate RMBs as compound pagesStefan Raspl1-0/+1
Preparatory work for splice() support. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>< Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Overlapping changes in selftests Makefile. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03net/smc: handle unregistered buffersKarsten Graul1-1/+2
When smc_wr_reg_send() fails then tag (regerr) the affected buffer and free it in smc_buf_unuse(). Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02net/smc: periodic testlink supportKarsten Graul1-0/+4
Add periodic LLC testlink support to ensure the link is still active. The interval time is initialized using the value of sysctl_tcp_keepalive_time. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: prevent new connections on link groupKarsten Graul1-0/+1
When the processing of a DELETE LINK message has started, new connections should not be added to the link group that is about to terminate. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: process add/delete link messagesKarsten Graul1-0/+10
Add initial support for the LLC messages ADD LINK and DELETE LINK. Introduce a link state field. Extend the initial LLC handshake with ADD LINK processing. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: do not allow eyecatchers in rmbeKarsten Graul1-0/+2
SMC does not support eyecatchers in RMB elements, decline peers requesting this support. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: process confirm/delete rkey messagesKarsten Graul1-0/+2
Process and respond to CONFIRM RKEY and DELETE RKEY messages. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: remove unused fields from smc structuresKarsten Graul1-1/+0
The daddr field holds the destination IPv4 address. The field was set but never used and can be removed. The addr field was a left-over from an earlier version of non-blocking connects and can be removed. The result of the call to kernel_getpeername is not used, the call can be removed. Non-blocking connects are working, so remove restriction comment. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-29net/smc: synchronize buffer usage with deviceUrsula Braun1-0/+4
Usage of send buffer "sndbuf" is synced (a) before filling sndbuf for cpu access (b) after filling sndbuf for device access Usage of receive buffer "RMB" is synced (a) before reading RMB content for cpu access (b) after reading RMB content for device access Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: common functions for RMBs and send buffersUrsula Braun1-2/+1
Creation and deletion of SMC receive and send buffers shares a high amount of common code . This patch introduces common functions to get rid of duplicate code. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for send buffersUrsula Braun1-2/+0
SMC send buffers are processed the same way as RMBs. Since RMBs have been converted to sg-logic, do the same for send buffers. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: register RMB-related memory regionUrsula Braun1-0/+12
A memory region created for a new RMB must be registered explicitly, before the peer can make use of it for remote DMA transfer. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: use separate memory regions for RMBsUrsula Braun1-1/+5
SMC currently uses the unsafe_global_rkey of the protection domain, which exposes all memory for remote reads and writes once a connection is established. This patch introduces separate memory regions with separate rkeys for every RMB. Now the unsafe_global_rkey of the protection domain is no longer needed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for RMBsUrsula Braun1-4/+2
The follow-on patch makes use of ib_map_mr_sg() when introducing separate memory regions for RMBs. This function is based on scatterlists; thus this patch introduces scatterlists for RMBs. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16smc: switch to usage of IB_PD_UNSAFE_GLOBAL_RKEYUrsula Braun1-1/+1
Currently, SMC enables remote access to physical memory when a user has successfully configured and established an SMC-connection until ten minutes after the last SMC connection is closed. Because this is considered a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in such a case. This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY. This improves user awareness, but does not remove the security risk itself. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: link layer control (LLC)Ursula Braun1-0/+6
send and receive LLC messages CONFIRM_LINK (via IB message send and CQE) Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: initialize IB transport incl. PD, MR, QP, CQ, event, WRUrsula Braun1-0/+18
Prepare the link for RDMA transport: Create a queue pair (QP) and move it into the state Ready-To-Receive (RTR). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: work request (WR) base for use by LLC and CDCUrsula Braun1-0/+30
The base containers for RDMA transport are work requests and completion queue entries processed through Infiniband verbs: * allocate and initialize these areas * map these areas to DMA * implement the basic communication consisting of work request posting and receival of completion queue events Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: remote memory buffers (RMBs)Ursula Braun1-0/+21
* allocate data RMB memory for sending and receiving * size depends on the maximum socket send and receive buffers * allocated RMBs are kept during life time of the owning link group * map the allocated RMBs to DMA Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: connection and link group creationUrsula Braun1-0/+106
* create smc_connection for SMC-sockets * determine suitable link group for a connection * create a new link group if necessary Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.