aboutsummaryrefslogtreecommitdiffstats
path: root/net/smc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-8/+25
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-03net/smc: fix sock refcounting in case of terminationUrsula Braun1-7/+8
When an ISM device is removed, all its linkgroups are terminated, i.e. all the corresponding connections are killed. Connection killing invokes smc_close_active_abort(), which decreases the sock refcount for certain states to simulate passive closing. And it cancels the close worker and has to give up the sock lock for this timeframe. This opens the door for a passive close worker or a socket close to run in between. In this case smc_close_active_abort() and passive close worker resp. smc_release() might do a sock_put for passive closing. This causes: [ 1323.315943] refcount_t: underflow; use-after-free. [ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130 [ 1323.316069] Kernel panic - not syncing: panic_on_warn set ... [ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1 [ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) [ 1323.316108] Call Trace: [ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8 [ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8 [ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288 [ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158 [ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130 [ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0 [ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238 [ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130 [ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130) [ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc] [ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0 [ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40 [ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278 [ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8 [ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520 [ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0 [ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38 [ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4 [ 1323.316446] 1 lock held by uperf/54469: [ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0 The patch rechecks sock state in smc_close_active_abort() after smc_close_cancel_work() to avoid duplicate decrease of sock refcount for the same purpose. Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: reset sndbuf_desc if freedUrsula Braun1-0/+1
When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: set rx_off for SMCR explicitlyUrsula Braun1-0/+2
SMC tries to make use of SMCD first. If a problem shows up, it tries to switch to SMCR. If the SMCD initializing problem shows up after the SMCD connection has already been initialized, field rx_off keeps the wrong SMCD value for SMCR, which results in corrupted data at the receiver. This patch adds an explicit (re-)setting of field rx_off to zero if the connection uses SMCR. Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: fix toleration of fake add_link messagesKarsten Graul1-1/+14
Older SMCR implementations had no link failover support and used one link only. Because the handshake protocol requires to try the establishment of a second link the old code sent a fake add_link message and declined any server response afterwards. The current code supports multiple links and inspects the received fake add_link message more closely. To tolerate the fake add_link messages smc_llc_is_local_add_link() needs an improved check of the message to be able to separate between locally enqueued and fake add_link messages. And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is invalid and reject the add_link request in that case. Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-20net/smc: Prevent kernel-infoleak in __smc_diag_dump()Peilin Ye1-7/+9
__smc_diag_dump() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 4-byte hole near the beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo` with memset(). Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net/smc: unique reason code for exceeded max dmb countKarsten Graul3-6/+12
When the maximum dmb buffer limit for an ism device is reached no more dmb buffers can be registered. When this happens the reason code is set to SMC_CLC_DECL_MEM indicating out-of-memory. This is the same reason code that is used when no memory could be allocated for the new dmb buffer. This is confusing for users when they see this error but there is more memory available. To solve this set a separate new reason code when the maximum dmb limit exceeded. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller8-136/+142
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-2/+2
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/smc: fix dmb buffer shortageKarsten Graul1-2/+2
There is a current limit of 1920 registered dmb buffers per ISM device for smc-d. One link group can contain 255 connections, each connection is using one dmb buffer. When the connection is closed then the registered buffer is held in a queue and is reused by the next connection. When a link group is 'full' then another link group is created and uses an own buffer pool. The link groups are added to a list using list_add() which puts a new link group to the first position in the list. In the situation that many connections are opened (>1920) and a few of them stay open while others are closed quickly we end up with at least 8 link groups. For a new connection a matching link group is looked up, iterating over the list of link groups. The trailing 7 link groups all have registered dmb buffers which could be reused, while the first link group has only a few dmb buffers and then hit the 1920 limit. Because the first link group is not full (255 connection limit not reached) it is chosen and finally the connection falls back to TCP because there is no dmb buffer available in this link group. There are multiple ways to fix that: using list_add_tail() allows to scan older link groups first for free buffers which ensures that buffers are reused first. This fixes the problem for smc-r link groups as well. For smc-d there is an even better way to address this problem because smc-d does not have the 255 connections per link group limit. So fix the problem for smc-d by allowing large link groups. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/smc: put slot when connection is killedKarsten Graul1-1/+5
To get a send slot smc_wr_tx_get_free_slot() is called, which might wait for a free slot. When smc_wr_tx_get_free_slot() returns there is a check if the connection was killed in the meantime. In that case don't only return an error, but also put back the free slot. Fixes: b290098092e4 ("net/smc: cancel send and receive for terminated socket") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig1-2/+7
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix restoring of fallback changesKarsten Graul1-2/+4
When a listen socket is closed then all non-accepted sockets in its accept queue are to be released. Inside __smc_release() the helper smc_restore_fallback_changes() restores the changes done to the socket without to check if the clcsocket has a file set. This can result in a crash. Fix this by checking the file pointer first. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: f536dffc0b79 ("net/smc: fix closing of fallback SMC sockets") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: remove freed buffer from listKarsten Graul1-1/+5
Two buffers are allocated for each SMC connection. Each buffer is added to a buffer list after creation. When the second buffer allocation fails, the first buffer is freed but not deleted from the list. This might result in crashes when another connection picks up the freed buffer later and starts to work with it. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 6511aad3f039 ("net/smc: change smc_buf_free function parameters") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: do not call dma sync for unmapped memoryKarsten Graul4-14/+18
The dma related ...sync_sg... functions check the link state before the dma function is actually called. But the check in smc_link_usable() allows links in ACTIVATING state which are not yet mapped to dma memory. Under high load it may happen that the sync_sg functions are called for such a link which results in an debug output like DMA-API: mlx5_core 0002:00:00.0: device driver tries to sync DMA memory it has not allocated [device address=0x0000000103370000] [size=65536 bytes] To fix that introduce a helper to check for the link state ACTIVE and use it where appropriate. And move the link state update to ACTIVATING to the end of smcr_link_init() when most initial setup is done. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: d854fcbfaeda ("net/smc: add new link state and related helpers") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix handling of delete link requestsKarsten Graul1-22/+7
As smc client the delete link requests are assigned to the flow when _any_ flow is active. This may break other flows that do not expect delete link requests during their handling. Fix that by assigning the request only when an add link flow is active. With that fix the code for smc client and smc server is the same, so remove the separate handling. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 9ec6bf19ec8b ("net/smc: llc_del_link_work and use the LLC flow for delete link") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: move add link processing for new device into llc layerKarsten Graul3-80/+58
When a new ib device is up smc will send an add link invitation to the peer if needed. This is currently done with rudimentary flow control. Under high workload these add link invitations can disturb other llc flows because they arrive unexpected. Fix this by integrating the invitations into the normal llc event flow and handle them as a flow. While at it, check for already assigned requests in the flow before the new add link request is assigned. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 1f90a05d9ff9 ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: drop out-of-flow llc response messagesKarsten Graul1-6/+18
To be save from unexpected or late llc response messages check if the arrived message fits to the current flow type and drop out-of-flow messages. And drop it when there is already a response assigned to the flow. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: ef79d439cd12 ("net/smc: process llc responses in tasklet context") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: protect smc ib device initializationKarsten Graul2-3/+14
Before an smc ib device is used the first time for an smc link it is lazily initialized. When there are 2 active link groups and a new ib device is brought online then it might happen that 2 link creations run in parallel and enter smc_ib_setup_per_ibdev(). Both allocate new send and receive completion queues on the device, but only one set of them keeps assigned and the other leaks. Fix that by protecting the setup and cleanup code using a mutex. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: f3c1deddb21c ("net/smc: separate function for link initialization") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix link lookup for new rdma connectionsKarsten Graul1-1/+3
For new rdma connections the SMC server assigns the link and sends the link data in the clc accept message. To match the correct link use not only the qp_num but also the gid and the mac of the links. If there are equal qp_nums for different links the wrong link would be chosen. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: clear link during SMC client link down processingKarsten Graul1-1/+3
In a link-down condition we notify the SMC server and expect that the server will finally trigger the link clear processing on the client side. This could fail when anything along this notification path goes wrong. Clear the link as part of SMC client link-down processing to prevent dangling links. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 541afa10c126 ("net/smc: add smcr_port_err() and smcr_link_down() processing") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: handle unexpected response types for confirm linkKarsten Graul1-3/+5
A delete link could arrive during confirm link processing. Handle this situation directly in smc_llc_srv_conf_link() rather than using the logic in smc_llc_wait() to avoid the unexpected message handling there. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 1551c95b6124 ("net/smc: final part of add link processing as SMC server") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: tolerate future SMCD versionsUrsula Braun2-13/+34
CLC proposal messages of future SMCD versions could be larger than SMCD V1 CLC proposal messages. To enable toleration in SMC V1 the receival of CLC proposal messages is adapted: * accept larger length values in CLC proposal * check trailing eye catcher for incoming CLC proposal with V1 length only * receive the whole CLC proposal even in cases it does not fit into the V1 buffer Fixes: e7b7a64a8493d ("smc: support variable CLC proposal messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: switch smcd_dev_list spinlock to mutexUrsula Braun4-18/+20
The similar smc_ib_devices spinlock has been converted to a mutex. Protecting the smcd_dev_list by a mutex is possible as well. This patch converts the smcd_dev_list spinlock to a mutex. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: fix sleep bug in smc_pnet_find_roce_resource()Ursula Braun4-18/+22
Tests showed this BUG: [572555.252867] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 [572555.252876] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 131031, name: smcapp [572555.252879] INFO: lockdep is turned off. [572555.252883] CPU: 1 PID: 131031 Comm: smcapp Tainted: G O 5.7.0-rc3uschi+ #356 [572555.252885] Hardware name: IBM 3906 M03 703 (LPAR) [572555.252887] Call Trace: [572555.252896] [<00000000ac364554>] show_stack+0x94/0xe8 [572555.252901] [<00000000aca1f400>] dump_stack+0xa0/0xe0 [572555.252906] [<00000000ac3c8c10>] ___might_sleep+0x260/0x280 [572555.252910] [<00000000acdc0c98>] __mutex_lock+0x48/0x940 [572555.252912] [<00000000acdc15c2>] mutex_lock_nested+0x32/0x40 [572555.252975] [<000003ff801762d0>] mlx5_lag_get_roce_netdev+0x30/0xc0 [mlx5_core] [572555.252996] [<000003ff801fb3aa>] mlx5_ib_get_netdev+0x3a/0xe0 [mlx5_ib] [572555.253007] [<000003ff80063848>] smc_pnet_find_roce_resource+0x1d8/0x310 [smc] [572555.253011] [<000003ff800602f0>] __smc_connect+0x1f0/0x3e0 [smc] [572555.253015] [<000003ff80060634>] smc_connect+0x154/0x190 [smc] [572555.253022] [<00000000acbed8d4>] __sys_connect+0x94/0xd0 [572555.253025] [<00000000acbef620>] __s390x_sys_socketcall+0x170/0x360 [572555.253028] [<00000000acdc6800>] system_call+0x298/0x2b8 [572555.253030] INFO: lockdep is turned off. Function smc_pnet_find_rdma_dev() might be called from smc_pnet_find_roce_resource(). It holds the smc_ib_devices list spinlock while calling infiniband op get_netdev(). At least for mlx5 the get_netdev operation wants mutex serialization, which conflicts with the smc_ib_devices spinlock. This patch switches the smc_ib_devices spinlock into a mutex to allow sleeping when calling get_netdev(). Fixes: a4cf0443c414 ("smc: introduce SMC as an IB-client") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: fix work request handlingKarsten Graul2-8/+10
Wait for pending sends only when smc_switch_conns() found a link to move the connections to. Do not wait during link freeing, this can lead to permanent hang situations. And refuse to provide a new tx slot on an unusable link. Fixes: c6f02ebeea3a ("net/smc: switch connections to alternate link") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: separate LLC wait queues for flow and messagesKarsten Graul3-48/+77
There might be races in scenarios where both SMC link groups are on the same system. Prevent that by creating separate wait queues for LLC flows and messages. Switch to non-interruptable versions of wait_event() and wake_up() for the llc flow waiter to make sure the waiters get control sequentially. Fine tune the llc_flow_lock to include the assignment of the message. Write to system log when an unexpected message was dropped. And remove an extra indirection and use the existing local variable lgr in smc_llc_enqueue(). Fixes: 555da9af827d ("net/smc: add event-based llc_flow framework") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-2/+2
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-8/+5
Pull rdma updates from Jason Gunthorpe: "A more active cycle than most of the recent past, with a few large, long discussed works this time. The RNBD block driver has been posted for nearly two years now, and flowing through RDMA due to it also introducing a new ULP. The removal of FMR has been a recurring discussion theme for a long time. And the usual smattering of features and bug fixes. Summary: - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa - Continuing driver cleanups in bnxt_re, hns - Big cleanup of mlx5 QP creation flows - More consistent use of src port and flow label when LAG is used and a mlx5 implementation - Additional set of cleanups for IB CM - 'RNBD' network block driver and target. This is a network block RDMA device specific to ionos's cloud environment. It brings strong multipath and resiliency capabilities. - Accelerated IPoIB for HFI1 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds - Support for exchanging the new IBTA defiend ECE data during RDMA CM exchanges - Removal of the very old and insecure FMR interface from all ULPs and drivers. FRWR should be preferred for at least a decade now" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits) RDMA/cm: Spurious WARNING triggered in cm_destroy_id() RDMA/mlx5: Return ECE DC support RDMA/mlx5: Don't rely on FW to set zeros in ECE response RDMA/mlx5: Return an error if copy_to_user fails IB/hfi1: Use free_netdev() in hfi1_netdev_free() RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr() RDMA/core: Move and rename trace_cm_id_create() IB/hfi1: Fix hfi1_netdev_rx_init() error handling RDMA: Remove 'max_map_per_fmr' RDMA: Remove 'max_fmr' RDMA/core: Remove FMR device ops RDMA/rdmavt: Remove FMR memory registration RDMA/mthca: Remove FMR support for memory registration RDMA/mlx4: Remove FMR support for memory registration RDMA/i40iw: Remove FMR leftovers RDMA/bnxt_re: Remove FMR leftovers RDMA/mlx5: Remove FMR leftovers RDMA/core: Remove FMR pool API RDMA/rds: Remove FMR support for memory registration RDMA/srp: Remove support for FMR memory registration ...
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds18-970/+3183
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-30net/smc: pre-fetch send buffer outside of send_lockKarsten Graul3-11/+21
Pre-fetch send buffer for the CDC validation message before entering the send_lock. Without that the send call might fail with -EBUSY because there are no free buffers and waiting for buffers is not possible under send_lock. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net/smc: mark smc_pnet_policy as constDmitry Vyukov1-1/+1
Netlink policies are generally declared as const. This is safer and prevents potential bugs. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20fs: make the pipe_buf_operations ->confirm operation optionalChristoph Hellwig1-1/+0
Just return 0 for success if it is not present. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: make the pipe_buf_operations ->steal operation optionalChristoph Hellwig1-7/+0
Just return 1 for failure if it is not present. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-07net/smc: remove set but not used variables 'del_llc, del_llc_resp'YueHaibing1-7/+1
Fixes gcc '-Wunused-but-set-variable' warning: net/smc/smc_llc.c: In function 'smc_llc_cli_conf_link': net/smc/smc_llc.c:753:31: warning: variable 'del_llc' set but not used [-Wunused-but-set-variable] struct smc_llc_msg_del_link *del_llc; ^ net/smc/smc_llc.c: In function 'smc_llc_process_srv_delete_link': net/smc/smc_llc.c:1311:33: warning: variable 'del_llc_resp' set but not used [-Wunused-but-set-variable] struct smc_llc_msg_del_link *del_llc_resp; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06RDMA: Allow ib_client's to fail when add() is calledJason Gunthorpe1-6/+4
When a client is added it isn't allowed to fail, but all the client's have various failure paths within their add routines. This creates the very fringe condition where the client was added, failed during add and didn't set the client_data. The core code will then still call other client_data centric ops like remove(), rename(), get_nl_info(), and get_net_dev_by_params() with NULL client_data - which is confusing and unexpected. If the add() callback fails, then do not call any more client ops for the device, even remove. Remove all the now redundant checks for NULL client_data in ops callbacks. Update all the add() callbacks to return error codes appropriately. EOPNOTSUPP is used for cases where the ULP does not support the ib_device - eg because it only works with IB. Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-05net/smc: remove unused inline function smc_curs_readYueHaibing1-17/+0
commit bac6de7b6370 ("net/smc: eliminate cursor read and write calls") left behind this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net/smc: log important pnetid and state change eventsKarsten Graul8-20/+113
Print to system log when SMC links are available or go down, link group state changes or pnetids are applied to and removed from devices. The log entries are triggered by either user configuration actions or adapter activation/deactivation events and are not expected to happen often. The entries help SMC users to keep track of the SMC link group status and to detect when actions are needed (like to add replacements for failed adapters). Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: save SMC-R peer link_uidKarsten Graul4-0/+13
During SMC-R link establishment the peers exchange the link_uid that is used for debugging purposes. Save the peer link_uid in smc_link so it can be retrieved by the smc_diag netlink interface. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: create improved SMC-R link_uidKarsten Graul4-5/+19
The link_uid of an SMC-R link is exchanged between SMC peers and its value can be used for debugging purposes. Create a unique link_uid during link initialization and use it in communication with SMC-R peers. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: improve termination processingKarsten Graul1-30/+31
Add helper smcr_lgr_link_deactivate_all() and eliminate duplicate code. In smc_lgr_free(), clear the smc-r links before smc_lgr_free_bufs() is called so buffers are already prepared for free. The usage of the soft parameter in __smc_lgr_terminate() is no longer needed, smc_lgr_free() can be called directly. smc_lgr_terminate_sched() and smc_smcd_terminate() set lgr->freeing to indicate that the link group will be freed soon to avoid unnecessary schedules of the free worker. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: add termination reason and handle LLC protocol violationKarsten Graul4-2/+30
Allow to set the reason code for the link group termination, and set meaningful values before termination processing is triggered. This reason code is sent to the peer in the final delete link message. When the LLC request or response layer receives a message type that was not handled, drop a warning and terminate the link group. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: asymmetric link taggingKarsten Graul3-9/+41
New connections must not be assigned to asymmetric links. Add asymmetric link tagging using new link variable link_is_asym. The new helpers smcr_lgr_set_type() and smcr_lgr_set_type_asym() are called to set the state of the link group, and tag all links accordingly. smcr_lgr_conn_assign_link() respects the link tagging and will not assign new connections to links tagged as asymmetric link. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: assign link to a new connectionKarsten Graul1-19/+46
For new connections, assign a link from the link group, using some simple load balancing. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: send DELETE_LINK, ALL message and wait for send to completeKarsten Graul3-0/+51
Add smc_llc_send_message_wait() which uses smc_wr_tx_send_wait() to send an LLC message and waits for the message send to complete. smc_llc_send_link_delete_all() calls the new function to send an DELETE_LINK,ALL LLC message. The RFC states that the sender of this type of message needs to wait for the completion event of the message transmission and can terminate the link afterwards. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: wait for departure of an IB messageKarsten Graul3-0/+42
Introduce smc_wr_tx_send_wait() to send an IB message and wait for the tx completion event of the message. This makes sure that the message is no longer in-flight when the function returns. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: handle incoming CDC validation messageKarsten Graul3-6/+48
Call smc_cdc_msg_validate() when a CDC message with the failover validation bit enabled was received. Validate that the sequence number sent with the message is one we already have received. If not, messages were lost and the connection is terminated using a new abort_work. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: send failover validation messageKarsten Graul3-1/+27
When a connection is switched to a new link then a link validation message must be sent to the peer over the new link, containing the sequence number of the last CDC message that was sent over the old link. The peer will validate if this sequence number is the same or lower then the number he received, and abort the connection if messages were lost. Add smcr_cdc_msg_send_validation() to send the message validation message and call it when a connection was switched in smc_switch_cursor(). Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/smc: switch connections to alternate linkKarsten Graul6-9/+162
Add smc_switch_conns() to switch all connections from a link that is going down. Find an other link to switch the connections to, and switch each connection to the new link. smc_switch_cursor() updates the cursors of a connection to the state of the last successfully sent CDC message. When there is no link to switch to, terminate the link group. Call smc_switch_conns() when a link is going down. And with the possibility that links of connections can switch adapt CDC and TX functions to detect and handle link switches. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.